NEW TRAXXAS MAXX V2 First Run Thoughts, Overview, and Impressions

  Рет қаралды 48,188

Rich Duperbash

Rich Duperbash

2 жыл бұрын

Mini Maxx in full effect. After seeing Martyn Crease absolutely flog his V1, I knew Traxxas had designed one of the toughest RC's ever, straight out of the box. Props to them for widening and lengthening this new version. She needs serious tuning, but has loads of potential. HUGE thanks to Fast Track Hobbies in Rocklin, CA for the epic inventory and service as always!!!!!

Пікірлер: 332
@richduperbash2966
@richduperbash2966 2 жыл бұрын
BIG thanks to Fast Track Hobbies, my LHS, for the Killer inventory 🤗. Turns out I had a small shard of gravel jambed under the right steering post at the end. Props to my bash buddy John for the tip about it. Max8 and shock tuning done and she feels like a different truck 👀. Way more responsive with far better power!!!! Completely woke the truck up. Excited to get her dialed and back out once the storms pass. 🍻
@paulclancy2404
@paulclancy2404 2 жыл бұрын
I guess I'll have to do the same because man I can't drive no where near the levels I do with even my 3s arrmas I was loving this truck and than I ripped my brcc . Fairness brcc been tuned and some key mods , I do have a max8 in one of my kratons . Don't worry for 85 bucks traxxas will give a new one to you but I think fully covered within 30 days . You may have to solder original plug back on
@paulclancy2404
@paulclancy2404 2 жыл бұрын
Ps i was being facetious ik you don't want another traxxas esc lol 😆 😂 🤣
@paulclancy2404
@paulclancy2404 2 жыл бұрын
Rich on my truggify typhon , I notice front shocks aren't rebounding right , do think i wore the pistons do we generally use larger hole pistons for more rebound ? I forget or should use exactly same , don't have any binding or anything . I'm going look through your old typhon tune videos 📹
@richduperbash2966
@richduperbash2966 2 жыл бұрын
@@paulclancy2404 thank so much Paul 🤗. Thing is I'm not compelled to buy a Traxxas link just to do basic tuning. Should come with these trucks in my opinion. Sounds petty, but it's ridiculous how most all ESC's can be programmed manually out of the box yet Traxxas wants people to pay for this simple luxury 😂. I'll run Hobbywing and get more out of the truck 💪. The BRCC is a little animal no doubt 😍
@richduperbash2966
@richduperbash2966 2 жыл бұрын
@@paulclancy2404 LMAO 😂. I missed this, but figured you were being fasicious 🤣🤙🤙
@trakofsky
@trakofsky 2 жыл бұрын
Merry Christmas Rich, thanks again for another awesome video !!!
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks so much Brother 🤗. Merry Christmas to you too 🍻😎💪👊👊
@droningharry
@droningharry 2 жыл бұрын
Rich I'm so glad you got this Rig I'm waiting for my store to get it back in Stock so I can pull the trigger on it. I really love it and it seems really tough. If it can stand up to you with minor problems I know it's good. Great video and a very Merry Christmas to you and your family!
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks so much Harry 🤗. Digging the mini Maxx so far. Definitely extremely durable straight out of the box. Just needs a better ESC for full power and basic tuning. Merry Christmas Brother!!! 🍻😎💪👊👊
@TheflyingkiwiRC
@TheflyingkiwiRC 2 жыл бұрын
Nice first rip bro. I'm sure you will get it driving a lot better. Have a great Christmas bro - bash on 💪💯👍
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks so much Brother 😜. Look forward to getting her driving proper. Merry Christmas to you too. 🍻😎💪👊👊
@kassemrc2point0
@kassemrc2point0 2 жыл бұрын
thank you for your videos they are great
@nikeking9510
@nikeking9510 2 жыл бұрын
Great run rich thanks now I’m go get one my self Waiting for my sledge parts to come in fast track hobbies is the best in Sacramento
@2040RC
@2040RC 2 жыл бұрын
Great video!!! Happy holidays Rich!
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks so much my Italian RC Brothers 😍. Happy Holidays 🍻😎💪👊👊
@samintrepid
@samintrepid 2 жыл бұрын
The MAXX pass the test with you Rich, for that reason I will buy one. Thank you great video and merry christmas Rich :)
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks Brother 🤗. The Maxx is super durable no question. Appreciate the kind words. Merry Christmas 🎄🍻😎💪👊👊
@rcmakingtracks18
@rcmakingtracks18 2 жыл бұрын
Rich, "I think is must be in training mode or something" ha. Nice video, thanks for sharing. John
@Justwiselove
@Justwiselove 2 жыл бұрын
This is what I have been waiting for!!
@Vincentkelton
@Vincentkelton 2 жыл бұрын
well if you jump it 40ft in the air and let it smash into the ground it might break.....
@richduperbash2966
@richduperbash2966 6 ай бұрын
She turned out to be quite durable. Unfortunately, Traxxas uses junk electronics to maximize profit margin along with proprietary add on's. Never had a single issue after dropping in a Max8 ESC. kzbin.info/www/bejne/i56bhJ94fs2MkKssi=Z_HV-jJB2jCdMVrY
@olds97lss
@olds97lss 2 жыл бұрын
Cool to see you rocking a mini maxx. I never ran stock electronics in my v1, or stock arms/tires. I threw a MMX/1515 2200kv in it and widemaxx arms out of the box. Then not long after, put a set of backflip lp's on traxxas 8671 wheels, really like those on it. I ran 4S in it at first, but the esc/motor ran hot to get the speeds I needed to clear some of my bmx jumps. Ended up going 6S with 20/54 gearing, now I have distance to spare even when just before LVC. On mine, the stock c-hubs would flex and allow the king pins to rip out of the front axle carriers. I put treal c-hubs on it and haven't had an issue since. I've broken a couple rear axle carriers in the past 5 months, but they are cheap, so I stick with stock. The servo saver is total mush in it, at least with BFLP's. I put the treal one on mine, traxxas tubes for tie rods and after frying the gears in the stock servo, I put a promodeler ds505blhv in it, but still run the BEC at 6V and it's plenty fast with more than enough torque to turn the tires lock to lock on carpet. I also modified my hinge pins but cutting a piece off each one and using a grub screw in the second hole to keep it from rotating. You can get the upgraded hinge pin kit which doesn't screw them in, just has retainer caps... I was just being cheap and worked with what I had. I just busted another front bulkhead on it Thursday (my 3rd so far). It was about 42F outside, so a tad cold for big air. Landed a couple nasty lawn darts. Also broke the front bumper mount and one of the front lower arms. Check out my latest video for my setup, it's in the description. Going to try GPM silver springs on the rear vs gold. I think the gold's might be a bit too stiff. I don't launch as big as you, but I'll get there one day! I'll likely end up with the v2 chassis next year to make it a bit less twitchy in the air. Just means I'll have to fork over another $80+ on a new unbreakable body... then the old body won't work for anything I got, which is kind of annoying... perhaps I can mangle it to fit it on something... will see.
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks for all the details Bryan 🤗. Looking forward to getting her dialed in with proper tuning and mods. Marry Christmas Brother 🎄😎💪👊👊
@mifo2000
@mifo2000 2 жыл бұрын
One thing i like about the original max was the fact it was a small... its kinda just gone from a big 1/10 to a 1/8 scale size
@KurtsRCs
@KurtsRCs 2 жыл бұрын
Nice bash, my Maxx does the same with the front hubs popping that screw pin out but you just unscrew it and put it back and off to the races again. It is a fun truck to bash
@alextuxhorn8921
@alextuxhorn8921 2 жыл бұрын
I work at a parts store here in my lil factory town and we just got 3 in (authorized traxxas dealer) and I've got a red and black one on order, can't wait and already have a 4s max 8 combo at home in the box
@nickteele169
@nickteele169 2 жыл бұрын
Seems like it will be a blast to drive man. Congrats on the new rig I have mojave exb on the way my self. I run into rocks n debris jamming up the steering on every 3s arrma I have n I end up making some flaps on top bottom n one side of where the steering comes thru the front of the chassis to keep rocks out in the front openings of the chassis where the steering feeds through. I've used fake leather n even just duct tape folded over itself for them. It keeps stuff out n allows the steering to travel still. I've also heard of people putting pieces of sponge around the front of the servo area doing the same thing. Looks like its craving more air for sure haha unfortunately any Traxxas esc I've ever had was almost just cosmetic lol they crap out fast. That max 8 will be killer in it for sure. Those tires look pretty sweet. Awesome the badlands are a good fit. Definitely look forward to seeing more of her soon man. Thanks for another awesome bash video man 🍻🍻🍻🍻🍻🍻
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks so much Nick 😜. Huge Congrats on your Mojave EXB 😍. I almost grabbed one before realizing I needed Green Bertha for parts testing 👍. Gave her a good neighborhood shakedown between rains yesterday with the Max8 and M2C O ring style pistons 😍. What an incredible difference 😱. Actually had a Blast doing a basic old school rip around. Felt like a new truck with the added power and responsiveness. The Badlands should help the overall ride even more.🍻😎💪👊👊
@nickteele169
@nickteele169 2 жыл бұрын
@@richduperbash2966 can't wait to see it again with the upgrades. I enjoy a simple shake down time to time too. Just throwing a set of hoons on the typhon n hitting my kids school parking lot brings a smile to my face lol. Merry Christmas man. Hope you and your family have a great Christmas 🎄
@TheHoweFam
@TheHoweFam 2 жыл бұрын
Just picked mine up this morning. I was hoping to grab a green one but Fast Track was out of green, so I got the blue one. Absolutely gorgeous.
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Congrats Brother 😱. Blue is an awesome choice. Enjoy it my friend!!! 🍻😎💪👊👊
@TheHoweFam
@TheHoweFam 2 жыл бұрын
@@richduperbash2966 thank you brother! I always enjoy your videos and reviews, and it’s rad to know you’re a local guy.
@flhandster4395
@flhandster4395 Жыл бұрын
Checking in. How ya liking the V2?
@rcsendandblast1579
@rcsendandblast1579 2 жыл бұрын
Awwwe man this run was magical to watch. I have been ripping my Maxx 4s for a year plus now it’s my go to because it’s never broken anything yet ( knock on wood) The steering c hub opens up and the pin can release in the front wheels like that. You need aluminum c hubs Mine has done it once on a hard crash 👍 Merry Christmas Sir 😉👊😎
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks so much my friend 🤗. Awesome to hear your Maxx has held up so well 👊. Definitely installing alloy C hubs this week. I've got high hopes for this sucker. 😎💪👊👊
@rcsendandblast1579
@rcsendandblast1579 2 жыл бұрын
@@richduperbash2966 Right on bud 👊😎 I’ve left it almost bone stock I added GPM rear shocks with 20thousand and a dash of 500cst😁 Still to light of oil lol oh well I’ll get it the shocks by GPM are holding up 💪👍
@jordanritchie2198
@jordanritchie2198 2 жыл бұрын
Thanks for the upload duperbash 👊👊 been thinking of getting this to do some snow bashing. Keep my arrmas for the good weather 😜 and did u leave the stock motor in it?
@richduperbash2966
@richduperbash2966 2 жыл бұрын
You bet Jordan 🤗. Yes I'm still running the stock motor for now. Already dropped in a Max8 😍. Big improvement no question. Your plan sounds solid too. 🍻😎💪👊👊
@y2shanon
@y2shanon 2 жыл бұрын
Awesome, man im in that area im gonna call tomorrow and see if they have some in stock! They seem to be backorder everywhere online
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks Brother 👊. Hope you found one. 🍻😎💪👊👊
@likandros3633
@likandros3633 2 жыл бұрын
Waiting eagerly for the second video after your tuning with m2c shock pistons and max8 esc..(i believe it needs diff tuning as well) Merry Christmas and thanx for the awesome content
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks so much Brother 😜. I'm super pumped to get back out after the holiday and rains stop. The Max8 on punch 5 is a night and day huge improvement in power and overall responsiveness 😱. I'm still fine tuning the shocks and had to use front M2C 6s ARRMA pistons (all 4 corners) plus 1000-1100cst 80-90 weight to get the springy bounce out of the rear especially. She's doing great in street testing so far. Merry Christmas my friend. 😎💪👊👊
@likandros3633
@likandros3633 2 жыл бұрын
@@richduperbash2966 thanx brother.. Wish you all the best
@aquasound-escapes898
@aquasound-escapes898 2 жыл бұрын
@@richduperbash2966 max 8 on punch 5.. is that just with ESC change? I’m new I apologize. I’m sure the rc truck will have more than enough power for a novice it seemed pretty damn fast… I just like options 😎
@richduperbash2966
@richduperbash2966 2 жыл бұрын
@@aquasound-escapes898 yes indeed. The Hobbywing Max8 ESC is a direct fit in the Maxx. It has more power and is more responsive all-around. I just had to solder 6.5mm female connectors onto the included motor leads to plug into the Maxx motor.
@aquasound-escapes898
@aquasound-escapes898 2 жыл бұрын
@@richduperbash2966 thanks brother 🙏 Just waiting PATIENTLY 😭 until tax return so that I can buy this RC car. This will be my 1 and only for a while but it looks pretty capable. Thank you for clarifying for me if it wasn’t already mentioned 😊💯 1 more thing… with the maxx 8 esc is the stock maxx capable of 6s ? Ty again! Subscribed💯😎
@SpeedSyko
@SpeedSyko 2 жыл бұрын
After my first test, I put a max 8 in it. Makes a big difference even on 4 s. I felt the same way, a little under powered. 👍 great bash, all ice here,,almost impossible to get big air. Awesome video! 👊
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks so much Brother 👊. Great to hear about your experience with the Max8. Maxx definitely feels underpowered for a 10+ lb rig out of the box. Looking forward to getting her dialed in. 😎💪👊👊
@adamhill2020
@adamhill2020 2 жыл бұрын
Always great vids rich! That maxx is on my list to get! Did u figure out what was goin on with your esc? Kinda make me wonder whether i should get a max
@adamhill2020
@adamhill2020 2 жыл бұрын
Merry christmas bro, have fun with the wide maxx!
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks so much Adam 🤗. Merry Christmas Brother. I'd grab the Maxx with the understanding that it needs a BLX, Firma, Castle, or Hobbywing ESC. I think the VXL 4s is simply cheap and unreliable. 🍻😎💪👊👊
@adamhill2020
@adamhill2020 2 жыл бұрын
Yeah i agree, lookes a little under powered in the vid!
@adamhill2020
@adamhill2020 2 жыл бұрын
Im waiting on you to get a e revo 2.0! I have a question and want your thoughts on a castle system for it, sidewinder 8th series or what would u go with bro? 2200kv motor is stock
@richduperbash2966
@richduperbash2966 2 жыл бұрын
@@adamhill2020 I think the Sidewinder comes with a 2200. I'd probably opt for a MMX or Max8. Might be all you need plus the stock motor.
@ivydome
@ivydome 2 жыл бұрын
Hell yea man throw the max 8 in to make all the difference as well as tuning those shocks, I’m running alum hubs on mine since the pin Ripped out just like yours did
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks Brother 🤗. Yeah the Max8 feels perfect in her 😍. Can't wait til the rain stops and I can get her out again with proper tuning. Hopefully have the alloy C hubs on tomorrow. She's gonna be a little Ripper before long. 😎💪👊👊
@owenthompson5511
@owenthompson5511 2 жыл бұрын
Hey so I'm also from the Sac area, have you have been to RC Country Hobbies? Theyve got a HUGE store with lots of cars, trains, and planes. But there car department is so big and awesome, you should really stop by if you havent already!
@richduperbash2966
@richduperbash2966 2 жыл бұрын
For sure Owen 👍. RC Country and Fast Track Hobbies in Rocklin both have a fantastic inventory. We're lucky to have them in the region. 🍻
@flhandster4395
@flhandster4395 Жыл бұрын
Cool runs and great initiation for the new rig. So, what's your thoughts between the V2 and the Hoss? I have a Rustler 2WD and looking to pick up a 4X4 truck. Please share if you don't mind. Thank you for the video and your time.
@richduperbash2966
@richduperbash2966 Жыл бұрын
Thanks so much my friend 🤗. I haven't owned the Hoss to compare, but the Maxx has a better reputation for overall durability. I will add my Outcast 4s V2 handles better, is more raw FUN and is also extremely durable and capable 😍. Just throwing that out there because it's cheaper than the Maxx V2. 🍻
@flhandster4395
@flhandster4395 Жыл бұрын
@@richduperbash2966 I’m not familiar with the Arrma brand at all. How do they compare to the comparable Traxxas trucks? I just did a quick search and came across a guy who bought an Outcast 4S and it was clunk out of the box. He took it back to the shop and they fixed it, but after getting back home, it died in less than 10 minutes. Now, he’s waiting on an ECU in order to get it up and running. What’s your experience between the two brands?
@sensi42000
@sensi42000 2 жыл бұрын
I know it sounds overkill but I put a max 6 in my mini maxx. Also put the 4268 2600kv motor in it with a stock steel spur and 21 tooth RR pinion. Always ran solid!
@CoachDRC
@CoachDRC 2 жыл бұрын
Have a merry christmas 🎄 💯💪🏾
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Merry Christmas Brother 🤗🎄⛄
@cante199
@cante199 2 жыл бұрын
Hey man! Thanks for sharing this stuff, t really appreciate as always! I have the V1 and actually seems not so fast with the vxl4s.. I would like to swap a vxl6s and test it with 4/6s lipo. Traxxas esc aren’t fine for the price maybe.. ? At the same pricetag you can find hobbywing and I guess is other quality.. hogher of course.. what do you think man? Last thing: for the “bouncy attitude” in hard landing, which oil should be better inside maxx’s shocks? Thank you mate
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks Brother 🤗. The Traxxas 6s ESC might work better, but I would way rather run a smooth Hobbywing Max8. Might try 80-90 weight. I'm now running 1100cst with M2C pistons and it's been AWESOME 😱😎💪👊👊
@cante199
@cante199 2 жыл бұрын
@@richduperbash2966 thanks mate I will try 90 for suspension, I already have it in my garage 😁 Max8 fit correctly in the maxx or Will I need a different mount? Vxl6s is plug and play and Is easy to swap but nothing compared to the smoothness of the max8.. I have noticed in your previous videos..
@richduperbash2966
@richduperbash2966 2 жыл бұрын
@@cante199 I made my own Kydex mount, but the Max8 actually comes with a plastic mount that is a direct fit I later discovered 😂
@cante199
@cante199 2 жыл бұрын
@@richduperbash2966 nooo hahahah.. you are too much manually skilled hahah.. if you don’t create stuff by your hands you’re not satisfied hahah
@Zillawill
@Zillawill 2 жыл бұрын
Just ordered a WideMaxx, have pretty much every 8th scale Arrma and always wanted a Maxx but was hard finding packs here in UK for it, the new chassis is bit bigger and lets me fit CNHL packs, deffo replacing ESC with a Max8 or 6, and might get some backflip LP's to give a try on it
@shawnrossi6364
@shawnrossi6364 2 жыл бұрын
Good luck getting that suspension tuned up that is the main reason that I ended up selling mine after pouring money into every possible upgrade you can do to the thing with the suspension would never sit right with me . Should be interesting to see what you end up doing to it been following your ex Maxx following right now
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks Shawn 🤗. I think the shock angles need modifying. Will say the M2C ARRMA 6s O ring style pistons fit perfectly and are a huge improvement with heavier oils. 🍻😎💪👊👊
@rcunknown5303
@rcunknown5303 2 жыл бұрын
Sucks Shelby and I missed the bash bro! 😕 looks like you all had fun though. Nice first bash with the maxx v2. Sucks about the crapy esc cutting out glad you ditched it anyways lol. We need a break in the rain 🌧 😫 I'm itching for a bash so bad
@richduperbash2966
@richduperbash2966 2 жыл бұрын
It's all good Brother John 👊. It was cold and damp with dirty pieces of toilet paper in the wheels 😂. Thanks so much for your tips with this sucker. You were spot on about a tiny rock jammed under the steering post 👀. Had to lift the bellcrank out before it fell off the post. Perfect wedge actually. Glad the crap VXL ESC let me finish my run. The Max8 completely woke her up 😱. Actually dropping 1100cst in the shocks with M2C pistons right now 😍. I've experimented with atleast 4 different weights, but think I've found the best combo 🤔. Looking forward to our next session and checking out your new shop 😜. Have a wonderful Christmas Bro. Talk soon. 🍻🚀🚀😎💪👊👊
@WoodsUnknown
@WoodsUnknown 2 жыл бұрын
Awesome video Rich as always, if a fella didnt own any bashers which would you get first. I like the looks of the new v2 but just from watching your videos i think a 3s granite or big rock looks a bit more solid and just as fast. would like to hear your thoughts.
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks so much Brother 😜!!!! Yeah the ARRMA 3s line is super Fun, durable, fast, easy to wrench on, and priced nicely 👍. The Maxx V2 is a solid rig, but it's priced kinda steep especially for having a questionable ESC. It's a bit bigger, but I enjoy my BRCC V3 just as much. 😎💪👊👊
@blackbirdrc8348
@blackbirdrc8348 2 жыл бұрын
Can’t wait to get one. I want the red 😍 still thinking about the Talion EXB too though. Wonder if the diffs are squared away on the EXB models yet🤔
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Either rig is a solid pick-up 👍. If you want speed and handling, grab the Talion 😍. The diffs were handled awhile ago. Personally, I like running open rear EXB diffs front and rear with the EXB shim kit. It eliminates the LSD plates. I'm indifferent about center LSD, but it is fun and handles nicely. 🍻😎💪👊👊
@blackbirdrc8348
@blackbirdrc8348 2 жыл бұрын
@@richduperbash2966 yeah I seen a buncha vids on the Talion EXB and it looks like it’s on rails. That’s good to hear the diffs were squared away (haven’t been watching the hobby for a few months) my main bashing area is a wide open sand quarry with huge 4-5 story sugar sand hills. Gonna be fun racing the quads and dirt bikes up the hill. Had my old rustler vxl out there and was beating the quads drag racing up hill 😂 gonna record it next time that woulda been one hell of a fun video!
@shawndoucet4751
@shawndoucet4751 2 жыл бұрын
i have put a maxx 8 in my maxx v1 and i love it ! sometimes also a rock will get nudge in the bellcrank
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks so much Shawn 🤗. I'm loving the Max8 in her too 😍. Way better power and responsiveness!!! You're spot on about the rock. It was wedged out of site right under the right steering post. 🍻😎💪👊👊
@m.anas8009
@m.anas8009 2 жыл бұрын
Hi Rich, I am jungling between Maxx V2 and Arma Notorious V5 as their price is really close now at my local hobby shop. beside 4S and 6S differences, what else is really comparable? do you have experience in Notorious V5? which is more durable? what is your say between this two option? Thousand Thanks
@troysrcchannel5659
@troysrcchannel5659 2 жыл бұрын
Traxxas tough. You killed it. Off topic I want to thank you. I recently watched one of your older videos talking about how you truggified your Typhon. After watching that I was able to do mine. I had always just thought it was a tire swap. Typhon is by far my favorite rig.
@richduperbash2966
@richduperbash2966 2 жыл бұрын
You're most welcome Troy 🤗. The Truggified Typhon is still my all-time favorite RC no question 😍. Appreciate your comment and Merry Christmas my friend. 🍻😎💪👊👊
@ricksprings
@ricksprings 2 жыл бұрын
Picked up Serpent Srx8e few weeks ago, I'm thinking of truggifying it.... I've noticed Serpent truggy/buggy parts are interchangeable.
@johngray8798
@johngray8798 2 жыл бұрын
What are your thoughts on shock tuning Rich?
@exp2tr10t
@exp2tr10t 7 ай бұрын
I know for mine I had to reset the endpoints on the transmitter and the ESC, as I had the same cut-out and cogging issues you did. After that, no problems. Great bash! And I love mine to death!
@richduperbash2966
@richduperbash2966 7 ай бұрын
Thanks so much my friend 🤗. Appreciate the feedback with yours and kind words 🍻
@errc2610
@errc2610 2 жыл бұрын
Don't toss the Mighty Kraton in the trash just yet, Brothah! 👌👍😁
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Ohhhhh hell no 😱. I'd never get rid of any of my ARRMA's 😍
@errc2610
@errc2610 2 жыл бұрын
@@richduperbash2966 😁👌👍
@xpedalpusherx
@xpedalpusherx 2 жыл бұрын
Good stuff, Rich! Putting it to the test as always. Curious if you would ever consider an E-Revo 2.0 project. I think you would enjoy that truck with the right mods and I would love to see what you could do with it. Anyway, cheers and happy holidays my man.
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks so much James 🤗. The Revo 2.0 does look fun, but I'm going to focus on the XMaxx and mini Maxx for the moment. Happy holidays to you too Brother 🍻😎💪👊👊
@johnholliday1796
@johnholliday1796 2 жыл бұрын
Duperbash Reviewing traxxas !!! What’s the world coming to 😂🤜🏼
@adamfrench7998
@adamfrench7998 2 жыл бұрын
Biggest issue I had with the v1 was always breaking the front and rear bulkheads got so sick of replacing them I got the aluminum ones, my esc also went out on my maxx
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks Adam 👍. I'll keep a sharp eye on them and upgrade sooner than later. Much appreciated and Merry Christmas. 🍻😎💪👊👊
@gurseveksrc3386
@gurseveksrc3386 2 жыл бұрын
What should I get, the arrma big rock v3 or the new maxx? Love ur vids.
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks Brother 🤗. That's a great question. The Maxx is a bit bigger and heavier, but I think both are Crazy durable and fun 😍. Parts are cheap either way too. The BRCC is easily as quick on 3s as the Maxx is on 4s and handles better out of the box. Obviously the 3s is much easier on the wallet. I'd say go with whichever interests you the most. 😎💪👊👊
@gurseveksrc3386
@gurseveksrc3386 2 жыл бұрын
@@richduperbash2966 thanks dude, after watching a lot of vid on both cars imma get the big rock, based on videos it’s more durable and easier on the wallet.
@jonk967
@jonk967 2 жыл бұрын
That was a nice run, I think this truck could be amazing once it gets a few upgrades. Looking forward to see what all you do to it.
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks Jon 🤗. Looking forward to making this a project 🍻😎💪👊👊
@aquasound-escapes898
@aquasound-escapes898 2 жыл бұрын
When referring to max8 upgrade, are you just talking about the ESC? Thank u and awesome video
@richduperbash2966
@richduperbash2966 2 жыл бұрын
@@aquasound-escapes898 thanks my friend 🤗. Yes indeed, the Hobbywing Max8 ESC works awesome in this truck. Massive improvement in performance. 🍻
@MrLoughneagh
@MrLoughneagh 2 жыл бұрын
Would you buy one of these or the typhon for you're first serious model?
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Sorry I missed your comment 👀. I prefer the Typhon 6s personally, but this truck is also very durable. 😎💪👊👊
@RazorRC
@RazorRC 2 жыл бұрын
Nice rip! Huge front flip there! Pretty much agree with your experience on the stock truck, definitely needs some work. I hate those threaded hinge pins, I’m running the optional captured pins that the truck should’ve come with. Bash on my friend! 👍👊🚀
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks so much Brother 🤗. Yeah I was actually struggling to drive straight and a bit cautious off my buddies Mega ramp 😱. Glad the ESC stayed on after the first couple shutdowns atleast. Gotta say the Max8 and heavier oils feel completely different 👍. Turns out the M2C O ring style ARRMA 6s pistons fit the Maxx perfectly 😱. She'll never be a true handler, but far better than out of the box. 🍻😎💪👊👊
@RazorRC
@RazorRC 2 жыл бұрын
@@richduperbash2966 nice! Good to know about the M2C pistons!
@KevinTalbotTV
@KevinTalbotTV 2 жыл бұрын
nice bash! alloy c hubs are a nice mod. I think your xmaxx esc might bolt strength in too :)
@joseCalderon1976
@joseCalderon1976 2 жыл бұрын
Even the Xmaxx ESC sucks on the Maxx. I tried it. The Max 8 ESC STILL works way better.
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks so much Kev 🤗. She doesn't handle so great out of the box, but the potential is there. Max8 made a HUGE difference 👀. Definitely getting alloy C hubs. Your buddy Martyn convinced me 100% the Maxx is part of a Zombie apocalypse 😱😂😎💪👊👊
@moesgarage1638
@moesgarage1638 2 жыл бұрын
@@richduperbash2966 don't get the traxxas c hubs get vitavon or treal
@CTKProductions..
@CTKProductions.. 5 ай бұрын
Hey Kev, it’s nice seeing you supporting other channels! That’s what makes you my favorite KZbinr!
@elpescador4963
@elpescador4963 6 ай бұрын
How long was the run time on the 4s battery
@richduperbash2966
@richduperbash2966 6 ай бұрын
Probably 15-20 minutes. I generally stop before hitting LVC. Usually stop at around 3.75V when I can to avoid problems.
@lukerecore
@lukerecore Жыл бұрын
Hey wutsup Rich, what do u think about leopard esc and motor combo?? Because I can get it off ebay ots only 150.
@richduperbash2966
@richduperbash2966 Жыл бұрын
I haven't tried their smaller combos, but leopard has a good reputation overall 🍻
@lukerecore
@lukerecore Жыл бұрын
@@richduperbash2966 It's a 2200kv,and a 150amp and esc.
@ianbudgetrc2574
@ianbudgetrc2574 2 жыл бұрын
I guess the ESC was experiencing a temp cutoff? If it has those flaws and still needs to be upgraded, then the kraton 6s v5 would be a better choice for such price range..
@richduperbash2966
@richduperbash2966 2 жыл бұрын
The blue VXL turd appears to be plain unreliable 😝. Too many comments left here supporting my theory 😂. Yeah it sucks when stock electronics hold a truck back and even worse when they pause the fun mid action. I'd definitely call it cheap and flawed. 🍻😎💪👊👊
@ianbudgetrc2574
@ianbudgetrc2574 2 жыл бұрын
@@richduperbash2966 can't wait to hear you say Traxxas tough baby 😂
@martyncrease8289
@martyncrease8289 2 жыл бұрын
I run that motor on 6s and with stock gearing and it’s crazy just need a good fan
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks so much Martyn 😜. You're the main reason I bought this truck Brother 👊. After seeing you flog the living hell out of yours, I didn't need anymore convincing about the Zombie like durability 👀🍻😎💪👊👊
@thomashernandez4027
@thomashernandez4027 2 жыл бұрын
Nice video. I own Traxxas and Arma. Both are great. I think armas are in beast mode but break a lot. The Traxxas seem to have better builds while the arma has better esc.
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks Thomas 🤗. ARRMA's have far more tuning and aftermarket upgrade options. An upgraded ARRMA can totally outperform most all Traxxas models, but that's not to say they're anymore fun. Just depends on what you like I think. 😎💪👊👊
@grahamnumber7123
@grahamnumber7123 Жыл бұрын
@@richduperbash2966 wow a comment worthy of truth. I am new into this coming from an RC heli background before simulators so learning from books the hard (and expensive way). I see hpw KZbin has become the profit centre of modern day pirates that will say and do any BS for profit. That said got my oldest son the X-Maxx simply on cost for repair and value for money. It still needed upgrades even for an 8 year old. He's out of training mode and still learning. Now I'm looking at the maxx for his brother BUT Arma have a new car that's looking pretty indestructible too. I love this industry gets better by learning from each other..end result decent guys like you give subjective points without slating one company over another. I think Arma learn a lot from hobby enthusiasts here and do better a their game. All good for us!. Keep up the good work. Sadly YouLube blocks the really important info in areas away from fun
@richduperbash2966
@richduperbash2966 Жыл бұрын
@@grahamnumber7123 thank you Brother 🤗. I try to stay as objective as possible with the different brands. Fortunately, ARRMA takes and actually searches out basher's feedback to help improve their products 😍. Not many companies do that. Yes they have cost and margin constraints, but they do what they can to incorporate running updates and make real improvements with subsequent versions. Their new V2 4s rigs are a great example of this. 🍻
@GreatLakesRC
@GreatLakesRC 2 жыл бұрын
Awesome first run with the new Maxx Rich! What the heck was going on with your ESC 🤷‍♂️ Traxxas electronics always seem to be glitchy 😂 Excited to see what it looks like with a max 8 and some tuning 👍👍
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks so much Brother Aaron 😜!!!! Traxxas should just make disposable ESC's. Put like 5 in the box with the cheap starter tools 🤣. Truck feels Killer with the Max8 on punch 5 😍. Hopefully get the most from the stock motor. 🚀🚀🍻😎💪👊👊
@GreatLakesRC
@GreatLakesRC 2 жыл бұрын
@@richduperbash2966 😂😂
@adamj3606
@adamj3606 2 жыл бұрын
Nice video. Haven't come across your stuff yet. Definitely be checking your other stuff out. Subscribed!
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks Adam 🤗. Merry Christmas. 🍻
@ZeuZLoD
@ZeuZLoD 2 жыл бұрын
I can't wait to get the parts to extend my Maxx. On 6s its an absolute bashing demon of a tank!
@htx_rc4256
@htx_rc4256 2 жыл бұрын
That’s a good and bad about those plastic c hubs. Enough flex to where it’ll pop itself out and not just shatter and break itself.
@rccrazy
@rccrazy 2 жыл бұрын
Anyone that watches my channel knows I'm not a fan of the first maxx even with the wide kit, it needs so much work out of the box! It's just a strange car and this new version doesn't seem much different other than the length and new wheels🤔 It seems like your enjoying it though🤘
@lukerecore
@lukerecore Жыл бұрын
Hey wutsup Rich, do u think that a max 6 will fit in this rig.
@richduperbash2966
@richduperbash2966 Жыл бұрын
I'm not sure. Max 8 fit perfectly 👌
@B.K._BerndK.
@B.K._BerndK. 2 жыл бұрын
👍🏻 😊 Nice
@alexp6409
@alexp6409 2 жыл бұрын
We can always count on Rich for some HUGE sends!!
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks Alex 🤗. That was as big as I could go with the stock ESC and spongy soft suspension. She should drive much better next time 😉😎💪👊👊
@geoc2black
@geoc2black 2 жыл бұрын
I personally call Maxx the Tank!!!
@johnmoulton2742
@johnmoulton2742 2 жыл бұрын
My erevo has same problem, the internal power switch does it more as it gets older. Max 8
@johnmoulton2742
@johnmoulton2742 2 жыл бұрын
Makes sense that could work, but when as in the max v2 it started doing it on the very first run 🏃‍♂️.
@bigboytoyzrc9258
@bigboytoyzrc9258 2 жыл бұрын
My esc did this this today as well? Really want to know what's causing this?
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Sorry to hear that Brother 😔. Unfortunately I think there's simply a quality issue. Probably a poorly designed switch that activates with harsh hits. To be perfectly honest, the VXL 4s is HUGE for it's limited voltage rating and truly holds the truck back. The Max8 is 50g lighter with WAY more power plus 6s capable 👍. The difference in performance is astounding 👀(same gears and Lipo).. If you're happy with the power, I'd consider a warranty claim, just realize the VXL is a turd compared to the other options available. 🍻😎💪👊👊
@bigboytoyzrc9258
@bigboytoyzrc9258 2 жыл бұрын
@@richduperbash2966 Thank you for the insight. Yeah I'm going to go ahead and grab a max8 bc the initial (sluggish power delivery) and the esc cut outs can only get worse. Great channel and great reviews bro🏁🏎🏎🏎🏁
@never-stock-rc2968
@never-stock-rc2968 2 жыл бұрын
It needs a 6s system for sure rich I think IMO.
@derekfisher4806
@derekfisher4806 2 жыл бұрын
Rich what shock weight did you end up tuning it with? Also what are those m2c arrma 6s pistons you referenced in another comment? Thanks
@richduperbash2966
@richduperbash2966 2 жыл бұрын
I'm still getting her dialed. Tried 4 different weights in the garage and out front. Think I'm going with 80 weight rear and near 90 weight front with M2C ARRMA 6s Delrin pistons. 😎💪👊👊m2cracing.net/arrma-notorious-v5-exb/384-m2c-3077-arrma-16-mm-oring-shock-pistons.html
@bigsammy991
@bigsammy991 2 жыл бұрын
Hi rich do you have a coupon code for m2c racing? Thanks.
@cruzinthruspace
@cruzinthruspace 2 ай бұрын
Is the V2 same as the wide Max
@richduperbash2966
@richduperbash2966 2 ай бұрын
Yes. The V2 has wider arms and links 🍻
@OswaldBeef
@OswaldBeef 2 жыл бұрын
Imagine the esc"s button is getting pushed everytime it lands eh? Doubtful but i wouldnt be suprised with traxxas stuff
@RC-sw8gv
@RC-sw8gv 2 жыл бұрын
Super Duper bashing man!!!
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks so much Brother 🍻😎💪👊👊
@ethannunley1205
@ethannunley1205 2 жыл бұрын
You should do a 6s conversion
@richduperbash2966
@richduperbash2966 2 жыл бұрын
I just might. Gonna try another 4s run with the Max8 and 25/46 gearing first. 😎💪👊👊
@Davesarsenal
@Davesarsenal 2 жыл бұрын
I’m having same trouble with esc shutting down, traxxas uk blaming it on non standard traxxas batteries and using traxxas/ec5 connector adapter. Rich having same issue makes me think esc is no good.
@richduperbash2966
@richduperbash2966 2 жыл бұрын
That's ridiculous for a company to try and force people to use their connectors or Lipos 😂. Sounds like an excuse to deny a warranty claim on a cheap product. 🍻
@JUMBOs-RC
@JUMBOs-RC 2 жыл бұрын
My X-Maxx shuts down when I land a huge jump... have to power the ESC back on
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Yeah I think the power button is just weak or poorly designed. Not sure that's the issue, but it's frustrating. She's running WAY better with the lighter Max8 😍. Way more power and much smoother control overall. 😎💪👊👊
@joseCalderon1976
@joseCalderon1976 2 жыл бұрын
I can't believe you guys parked your real cars so close to the Chaos 🤣🤣🤣🤣🤣
@richduperbash2966
@richduperbash2966 2 жыл бұрын
LMAO 😂. Yeah that was definitely not the best idea 😱. I was telling Chris not to worry cuz it was his wife's BMW 🤣🍻😎💪👊👊
@ReadySetRC
@ReadySetRC 2 жыл бұрын
Excellent video once again brother👍💪👊 Another Traxxas, did not see that coming at all! Can't wait to see how you tune this up👊💪👍💯🔥
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks so much Brother 😜!!!! Lots of ruffled feathers in the comments my last XMaxx upload 😱😂. Every rig has it's limitations and most reasonable guys get it fortunately. Excited to get this sucker tuned and dialed soon. 🚀🚀😎💪👊👊
@CommanderAstigRC
@CommanderAstigRC 2 жыл бұрын
Awesome breakdowns and shakedowns with the Maxx V2 brother Rich. She seems very capable basher. under powered out the box definitely need shocks tuning as well. Love how she handles those sends much controllable for sure. Bummer on the ESC glitching Bro. Topical Traxxas trash electronics. Looks like it'll have some M2C treatment coming in the pipeline for this sucker. Awesome session brother. Merry Christmas to you and your family!
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks so much Brother Chris 😜!!!! Yeah that blue turd got yanked quicklike 😂. The stock motor feels good with the Max8 👀. Definitely a HUGE improvement even with stock gearing. Excited to get her fine tuned soon. Merry Christmas my friend!!!! ⛄🚀🚀😎💪👊👊
@moesgarage1638
@moesgarage1638 2 жыл бұрын
@@richduperbash2966 made the button on the esc pushed down and turned it off🤔
@lositruggies1581
@lositruggies1581 2 ай бұрын
Why 90% landings are edited? Still bad on turning over ?
@gasolinediesel972
@gasolinediesel972 2 жыл бұрын
The traxxas esc's sometimes just randomly shut off. I can recall several occasions where I've had to turn my esc's back on. Half the time it is literally just sitting there when it happens too. Usually leads to the red lights of death that these esc's are infamous for. Just put a max 8 in my maxx can't wait to rip on 6s to hell with the vxl4s
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks Brother 🤗. Yeah it's pathetic Traxxas can't find an alternative for their blue turd VXL's 😂. I dropped in a Max8 after this run and the difference was remarkable. Just don't have the patience for unreliable crap electronics anymore. 🍻😎💪👊👊
@gasolinediesel972
@gasolinediesel972 2 жыл бұрын
@@richduperbash2966 They really should've never stopped having castle build their electronics. It's sad that a 10 year old E-revo has a better esc than a new one. I've killed two of these blue vxl esc's. One 6s and one 4s. All of the 4s/6s/8s crap esc's are basically the same internally which makes sense because they're all related to the old fire hazard vxl6s from the xmaxx. JUNK
@rcjoe406
@rcjoe406 2 жыл бұрын
Esc has big air protection haha
@richduperbash2966
@richduperbash2966 2 жыл бұрын
LMFAO 😂
@johnholliday1796
@johnholliday1796 2 жыл бұрын
Oh yes it’s a sign of things to come rich it’s a traxxas
@averylooper5534
@averylooper5534 2 жыл бұрын
Awesome bash! I thought it did pretty good for a stock outta the box truck. Esc aside. It's gonna be a fun one thanks for posting
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks so much Brother Avery 😜!!!! The suspension was ultra soft and steering a bit squirrelly, but grateful the ESC stopped shutting off and I could get a run in. Merry Christmas to the entire Looper family 😍🚀🚀😎💪👊👊
@rogueFactor
@rogueFactor 2 жыл бұрын
was waitin' for a proper bash review. and a place to order one. my LHS is... well. no comment.
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks Brother 👊. Excited to get this little sucker dialed in soon. She's got a ton of potential. 🍻😎💪👊👊
@islandrc-duke1972
@islandrc-duke1972 2 жыл бұрын
cool rc and awesome bashing,Merry Christmas brother
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Merry Christmas to you too Brother 🤗 😎💪👊👊
@islandrc-duke1972
@islandrc-duke1972 2 жыл бұрын
@@richduperbash2966 thank you
@RCShaun321
@RCShaun321 2 жыл бұрын
Another good vid man, A+ all the time? And happy Xmas to u and Ur family, p.s can't wait for m2c parts for the X maxx 8s platform 👍👌💪👉
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks so much Shaun 🤗. Merry Christmas to you too Brother!!!! 🍻😎💪👊👊
@alankowalski8781
@alankowalski8781 2 жыл бұрын
How in the hell do they come out with a V2, and still havent fixed the ESC problems from the first gen
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Great question Alan 🤗. It sucks that companies cut corners with crappy electronics. It lowers the overall value no question. Grateful I had a Max8 on standby. The difference in performance is ridiculous. I also yanked the reciever/remote for an old Tactic TTX300 3 channel. Just have no need for TQi or anything besides responsive throttle and braking. 😎💪👊👊
@alankowalski8781
@alankowalski8781 2 жыл бұрын
@@richduperbash2966 after the X Maxx and the mini Maxx, I refuse to buy another Traxxas product. I build one, but I will not buy one. Both of those I have rebuilt atleast trice with all upgraded parts. My mini Maxx currently has the mamba x8s with the 1717 1650kv. I tried the X 6s with the 1515 and the motor would just over heat
@richduperbash2966
@richduperbash2966 2 жыл бұрын
@@alankowalski8781 yeah I won't be buying another one anytime soon. I dumped a ton of money into my Slash Platinum years ago to get it where I wanted. The VXL system overheated easily. Think I swapped in a Sidewinder 8th. You're doing it right by building them instead of buying new 👊. Appreciate the details with your Maxx. Must haul ass with that setup 👀
@alankowalski8781
@alankowalski8781 2 жыл бұрын
@@richduperbash2966 I still can’t run it, because I dumped the motor mount and bulkheads for Vitavon, because their motor mount works on a slide rather that the Traxxas pin BS, but the slide doesn’t slide down enough to run a reasonable pinion. Smallest I can run is a 27t pinion, and not because I want to. And when you do that the Vitavon gear covers don’t fit. I reached out to Vitavon, and they said they would fix it and send me new stuff but I haven’t heard anything from them since
@richduperbash2966
@richduperbash2966 2 жыл бұрын
@@alankowalski8781 damn that's frustrating. Hopefully Vitavon will come through. I'll have to check out more of their stuff. Planning to stick with 4s for now with 25/46 gearing. Might look into a different motor soon.
@yyckey5022
@yyckey5022 2 жыл бұрын
You right rich, traxxas should just put 6s on the v2. Also some people are saying this maxx v2 have gear down one tooth on the pinion( from v1 24t down to v2 23t) For hard basher, you will need to upgrade to aluminum c hub, or the pin will keep coming out as you bash.
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks so much for the feedback and tips Brother 🤗. I'll be swapping to alloy C hubs pronto. 😎💪👊👊
@sheldonisnumberone
@sheldonisnumberone 2 жыл бұрын
The problem with the ESC is that you are treating a Traxxas like an Arma. Drive the Traxxas like you would a $50 Walmart car and you'll have less breakages.
@BEASTMODERC
@BEASTMODERC 2 жыл бұрын
3.8 are the best tire for that truck
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Yes!!!! I'm chopping at the bit to run my Badlands 3.8s 👀. Unfortunately, were dumping rain here big-time for the next week. 🍻😎💪👊👊
@Basherqueen
@Basherqueen 2 жыл бұрын
Max8 should really wake that sucker up. Stock ESC is anyhow best to retire out of the box. 6S and lower gearing should be better for runtime and battery than 4S high geared. Afterbounce looks like a new project for M2C AWESOME O-Rong Piston solution. C Hubs are known for ripped out screws. Definitely a good Platform kind a in between Outcast and old MAXX, so for many probably the perfect fit before going all out 6S with the Outcast. Can't wait to see how you dial her in 😘😘😘
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks so much dear Kimberly 😍. Definitely a HUGE difference in smooth, instant power delivery and range with the Max8 🥰🥰. Woke the truck right up 👀. I might go 6s, but would need some flat style packs and don't want to add too much weight. Excited to do some experimenting. The M2C ARRMA 6s pistons fit perfectly and feel WAY better with heavier oils. Hopefully have my alloy C hubs by tomorrow. I think with Badlands 3.8's I'll get the truck handling awesome and fast as heck. Merry Christmas 😘😘😎💪👊👊
@WhiteBarrett
@WhiteBarrett 2 жыл бұрын
Thanks for sharing. Definetly would love to see GPS test with the stock setup, and then after upgrading to Max8.
@jessewilliamson2408
@jessewilliamson2408 2 жыл бұрын
awesome video. man not another traxxas is the fleet, way to much traxxas.at once lol.keep killing it bro love the videos you take all your rigs to the max
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks so much Jesse 🤗. A lot of dudes crapped their pants seeing broken XMaxx parts my last upload 👀. Not sure why, I'm just sharing my honest feedback and every RC has it's faults. This little Brother is built like a tank from everything I've seen. Just have to get the handling sorted. 😎💪👊👊
@thomasmanders255
@thomasmanders255 2 жыл бұрын
I would shut off too if I was this truck hahaha
@richduperbash2966
@richduperbash2966 2 жыл бұрын
LMAO 😂
@midwestboss8808
@midwestboss8808 2 жыл бұрын
🌲🌲🌲 nice rip Rich! Looks like the Maxx needs 6s , short gearing and some aluminum upgrades
@richduperbash2966
@richduperbash2966 2 жыл бұрын
For sure Brother 😜. Gotta get this sucker dialed. Merry Christmas my friend!!!! 🍻😎💪👊👊
@midwestboss8808
@midwestboss8808 2 жыл бұрын
@@richduperbash2966 ya I've seen 6s on stock gearing and it's got the punch and speed it needs , merry Christmas bro! 🌲
@ASmith-kg4iw
@ASmith-kg4iw 2 жыл бұрын
Sick rip, as always! the maxx is one of my favorite platforms. after i added the widemaxx kit a reefs raw 500 and old firma blx 6s system. She rips and she's been a little tank. one of my go to snowbashers. (I'm in maine) I've had very to little bearkage. can't wait to see the next shake down!
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks so much Brother 🤗. I bet the Firma system works Killer in her. 🍻😎💪👊👊
@thunderrc
@thunderrc 2 жыл бұрын
Killer first run with the Maxx Brotha!💥💥💥⚡⚡⚡🚀That ESC sucks the big one haha. Max 8 to the rescue🤩💯💯💯💯💯💯
@RCPropaganda
@RCPropaganda 2 жыл бұрын
sick. I just got one but it's snowing so can not go out. Hope maybe m2c makes stuff for the maxx too.
@richduperbash2966
@richduperbash2966 2 жыл бұрын
CONGRATS Brother 😱. Yes indeed, M2C got one too for parts design 👍. I know this truck probably doesn't need much, but there's always something that could use improving. 😎💪👊👊
@myrclife
@myrclife 2 жыл бұрын
An arrma blx 185 will bolt straight Into the stock esc bolt holes. Also a mamba monster esc will bolt straight into the stock esc location.
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks so much Brother 😜. Much appreciated. Blue turd is out thank goodness. 😎💪👊👊
@stephanesaucier5820
@stephanesaucier5820 2 жыл бұрын
Can wait to see this machine get dupermodified !!!! 😜
@richduperbash2966
@richduperbash2966 2 жыл бұрын
Thanks Brother Stephane and Merry Christmas from California 🤗🍻😎💪👊👊
@stephanesaucier5820
@stephanesaucier5820 2 жыл бұрын
@@richduperbash2966 Merry Christmas brother!!!!!
@rcjabroniyup4959
@rcjabroniyup4959 2 жыл бұрын
The esc cant handle the altitude.
@reycox
@reycox 2 жыл бұрын
I've already own kraton and notorious 6s, and hoss, do you think this would be nice addition to have or no, thanks for answer.
@myrclife
@myrclife 2 жыл бұрын
I think the Maxx is way better than the hoss. If you like your hoss...you'll LOVE a maxx.
@reycox
@reycox 2 жыл бұрын
@@myrclife well, I dont like hoss very much... Maxx seems like little bigger brother of hoss
The NEW Traxxas Maxx 2.0 WideMaxx Monster Truck
11:57
AMain Hobbies
Рет қаралды 326 М.
FOOLED THE GUARD🤢
00:54
INO
Рет қаралды 61 МЛН
Tom & Jerry !! 😂😂
00:59
Tibo InShape
Рет қаралды 42 МЛН
TRAXXAS MAXX V2 - UNBOXING
13:53
RC Knockout
Рет қаралды 8 М.
Important Upgrades for The Traxxas Maxx V2
12:32
Thunder RC
Рет қаралды 49 М.
E revo 2.0 and the Maxx V2 | comparison and run video!
26:30
RC Reviews
Рет қаралды 70 М.
Traxxas MAXX | One Year Review
15:01
Red BANDIT Racing
Рет қаралды 3,9 М.
Is This The WORLD'S BEST Small RC Car?
13:42
Kevin Talbot
Рет қаралды 635 М.
Traxxas Maxx 4S V2 (Hobbywing Max8 running on 4s and 5s, double backflip)
17:52
Jason Perrin RC Vlogs
Рет қаралды 13 М.
Traxxas Maxx V2 (Product Review)
13:22
BC Hobbies
Рет қаралды 9 М.
Traxxas Maxx V2 After 1 Month of Abuse!
12:16
Thunder RC
Рет қаралды 28 М.
FOOLED THE GUARD🤢
00:54
INO
Рет қаралды 61 МЛН