Install video would be great. Wiring and plumbing video would help a lot of people out including me 😂
@98saleen10 ай бұрын
Nice update! My recent upgrade is working well!
@tim_misfitmfg2 ай бұрын
Informative for sure!
@autoaddictions7 ай бұрын
could you demonstrate how to lock the dome pressure at a certain point for dyno tuning.. where you may need more that 10 sec to get it going.
@h8trainfox9128 ай бұрын
I love my boost leash
@98whiteGSX1004 ай бұрын
So for roll racing purposes.on an auto Would you need to setup a wot switch to start the stages ? For traction reasons ?
@Kris6oh5 ай бұрын
Can this work with a msd 2 step box ? Instead of the trans break? So I can launch on gate pressure of 7psi?
@FullBoltOnRacing4 ай бұрын
So what’s happening with mine. I target 14psi gate but only get 10psi manifold. I’ve got 10psi springs and it’s like it’s just running spring and the controller isn’t effective
@craigbuilt7 ай бұрын
How would you set it to just run 12psi all the time? Without ramping it in or boost per gear.
@16sport946 ай бұрын
If you have 5psi spring for example, use 1 stage, 0.00 time, rate 50 and 7 gate. Try it and see what boost it actually made and adjust up/down to get your 12psi. This providing you’re using onboard air or CO2
@thessbeast4099 ай бұрын
OK so what's the difference using a 14psi spring (my max boost 28psi) with intake manifold pressure vs using a 3psi spring with co2??
@h8trainfox9128 ай бұрын
You will not be able to control or make less then 14psi.
@thessbeast4098 ай бұрын
@h8trainfox912 got you!!. Thanks
@ricklay43474 ай бұрын
Anyone else having problems with solenoids not working?