New & Updated Radar Detectors as of October 2024

[@goaski474]

My first radar detector was the Fuzz Buster 2+2, man did we have a blast with it!. Then the Escort, V1 and now the V1G2. Mike is a legend, the industry will surely miss him.

[@rustyricky6684]

Oh no!!! Mike passed away?!?! I haven’t looked at radar detectors or anything recently!! Not since I got my Uniden R8

[@brandtharen]

I'd love to see a video on the history of Cincinnati Microwave and the early development of radar detectors. My first experience only started with the original Escort Passport Solo.

[@g.k.1669]

I still have my original Escort from 1985 and used it in my 1970 Chevelle. That thing saved me from a lot of trouble back then.

[@doeboymagic105]

Do you recommend Valentine 1 V2 after the owner passed?

[@tyranelewis7763]

Yes, I would love to see the V1 interview. The V1 was my first high end detector and at that time in the late 80s it was the best. RIP Mr. Valentine.

[@Cappilot1]

Did Valentine pass away?

[@vasekvi]

Definitely would love to see that interview!

[@drew5955]

Can't wait for your next video on the updates for the Escort Redline 360c!

[@twotoned2774]

Thanks for the update. Glad you covered the custom firmware for the R7. I love it.

[@JimBailey]

Thank you so much Vortex Radar. :)

[@ZboeC5]

Definitely want to see that interview. 77Ghz is where the WABCO collision warning systems on class 8 (semi) trucks operate. These systems constantly transmit and tell the driver the speed of the vehicle in front of it at all times. These systems have been standard equipment on the most popular OTR trucks sold in the US, including the Freightliner Cascadia, Volvo VNLs and Kenworth T680. That'll be fun to try to filter out.

[@saltysteel3996]

That's above Ka band. No radar detector should even alert to that.

[@MattH-wg7ou]

Why would 77Ghz be difficult for an RD to filter? That's nowhere near the bands used for speed enforcement.

[@kevinheath9935]

Yes, please do the interview with CM employee #1

[@v-vddk]

I can tell you that Genevo worked quite nice for copied from NeoLine detector. But it worked in Europe, don't know how it will be with filtering in USA.

[@flobull2]

Thanks for the heads up on the certified refurbished Uniden R8 units. I picked one up and set it up today with your file upload. Now running 2 R8’s between 4 vehicles.

[@Xmatador20]

How much did you pay for if you don’t mind me asking

[@juanvazquezjr1969]

@@flobull2 I believe it was $599 for the unit.

[@SustainableDreams]

YES! Interview!!! Very interested

[@karolissabaliauskas7138]

I have had the Genevo LT One Plus M for a long-time. A great Radar Detector. Since the Launch of Guard77, thinking about updating my radar detector to that one. In my country, unmarked police cars have started using Turkish technology (W band) that my current radar detector cannot catch. If all the tests and calibrations with the Guard77 are going to work, definitely going to upgrade mine. Police thought they were slick, well, Genevo backfired at them :)))

[@CannonballCC]

I'm definitely looking forward to the Tennessee results. That event is going to be huge!

[@kenwingo4862]

Where in Tennessee?

[@mqueue00]

Thank you for the usual great content! I'm left SMH that the flagship R8 is lagging the update curve, and after handing over multiple hundreds of dollars, hearing that there will be a new version that gets the updates, I'm left extremely put off by Uniden. A new release does not mean my investment should be disregarded. The R7 gets hooked up, but the R8 abandoned? Ugh

[@Longsnowsm]

Do we have any news on the future of Valentine since Mike has passed? Who is leading the company now?

[@INFINITE-AMMO]

I think uniden is

[@ZboeC5]

@@INFINITE-AMMO *sensible chuckle*

[@christopherjackson210]

Yes, this. Any news on the future of valentine going forward? Would love to see interview as well.

[@INFINITE-AMMO]

@@Longsnowsm or atleast i thought it was im kinda pissed about the R8 snub

[@akd3ntguymattST]

Hang on autowave will have a new device in 4 months that won’t be justifiably THAT much better than the V1G2. I get it. Every foot has a shoe. but Jesus. Someone get better at future proofing or just focus on a new device every time there’s the smallest feature to be added. Just stay in that lane. Let’s not develop new add ons ect.

[@jasonmhite]

Uniden not updating the R8/4 with new features they are adding to the R7/3 is an embarrassment. Very frustrating as an R8 owner.

[@MrTherandomvidsguy]

I think the R8 will get it.... Eventually. Probably prioritizing older stuff first which shouldn't be that way lol

[@nerdneckbrodski731]

I know very disappointing. I get a ton of K band of false alerts on my r4. Thinking about turning K band off completely. Besides the false alerts my r4 is phenomenal

[@3prefan]

@@nerdneckbrodski731do you use the suggested settings? I don’t have many K band alerts with his settings from his website.

[@jasonmhite]

@@MrTherandomvidsguy Total speculation but I'm guessing they have one person who works on the R4/8 firmware and one who works on the R7/3, and the one working on the 4/8 is busy working on whatever new wifi version instead of adding features.

[@theabyssaldemon]

They'd better be cooking up a massive update for the R8.

[@alextaylor8776]

Back in the 80’s I was big into radar detectors. I had three over those years, the ESCORT was the best. One was stolen and two were confiscated by the cops. I haven’t had a speeding ticket since 1995, getting old does have its advantages ha ha..

[@rustyricky6684]

What the hell?!?!? What state do you live in where the police took your radar detectors!!!???? That would/could NOT happen in Utah

[@alextaylor8776]

@ Canada, Ontario Canada. Radar detectors were and are illegal here. I know, it sucks.

[@Jim-fp3kt]

Yes to the interview I always find those fascinating learning about the background of innovation.

[@d2ddad]

I love hearing from pioneers! Please do that interview, thanks!

[@Soganxsarimsak]

Yesssss vortex dropped again

[@zeitgeist888]

As usual great and timely info in detail. Thank you

[@johnqcitizen9177]

Thanks for your hard work on informing us

[@CurtisRLN23]

Thanks for all this info I feel me too was updated now 😊

[@darylhaack7752]

Thanks for posting these new updates. It appears some companies need to catchup to the industry. As always looking forward to the next release. Cheers

[@lindseyyah1]

Great job as I just updated my max 360

[@shawoo]

Yes please do that interview!

[@zephyr4620]

Thanks for the updates, could you please place time stamps for the different radar?

[@Fisheee123]

5:16 FINALLY, I go to advance auto a lot near my house, and it's at the corner of an intersection with a red light camera, and it would just keep saying "Red light camera ahead" 😂

[@yayinternets]

Definitely do the interview!

[@lawnmowerman2199]

Yes, definitely please. I would love to see an interview with the first employee of Cincinnati microwave and anything U2 guys would like to talk about please yes

[@SloDwn1135]

Oh, that Blinder seems so much better to install. Would love to see that in the US.

[@Iucky225]

Hell yes to the Cincinnati microwave V1 interview

[@Cybertruck_69]

I have a Escort Passport 8500 x50. Any way or need to update it? How do you do that? Thanks.

[@AndyGraglia-uu2zz]

Hi, what radar detector do you recommend for Stalker Lidar, Trucan and Doppler cameras?

[@petertousignant6566]

More detectors need to add Bluetooth. There are so many reasons for this! My two main reasons are 1) for motorcycle use so I can hear the warnings inside my helmet. If you want to go really tech one that would synch and work with heads up displays that you can get in certain helmets. 2) when in my car I would like them to connect to my ear pieces, so my passengers don’t have to hear it or obvious interruption of a conversation between passengers and myself.

[@JayLeeZ28]

But where's Theia ;)

[@hamzashakir]

I'd forget about it at this point, as it's just a pipe dream.

[@M1911jln]

ROFLMAO. Beat me to it.

[@michaelramirez2382]

Theia better come out before GTA 6

[@saltysteel3996]

It's apart of the DoD. It will not be available to the public anymore.

[@printingwithpeek4897]

​@@saltysteel3996 No it's not.

[@JohnDavid9719]

On the newest R7 firmware 1.51 update, you'll need to also update the GPS with a BIN file. I'm guessing it's doing some sort of update to the PIC chip for the GPS! It would be really nice if you could do a step by step on this process, it was a little tricky for me doing the GPS update, not sure why!

[@VortexRadar]

It's either integrated with the firmware update file or a separate bin file, designed to update the red light cam / speedcam database. I've done a "how to update" video multiple times. Feel free to search for one of the newer videos if you like.

[@JohnDavid9719]

@@VortexRadar Hey Thanks for the info! I Love your videos and have been a radar detector guy since the original Escort from 1980. Now I'm a Uniden R7- R8 guy, Wish I could afford the R9 but O WELL. Keep up the good work!

[@TCE_2025]

Stinger is working on additional W band antenna which can be added to the VIP. No need to run all kinds of systems. Just get one modular system. "Future proof"

[@bipedal-ape-man]

Can any of these detect unmarked vehicles.

[@VortexRadar]

Given that they’re radar detectors and not police car detectors, it depends on if the unmarked vehicles are transmitting radar or not.

[@bipedal-ape-man]

@@VortexRadar Do unmarked police vehicles emit radar?

[@ld7788]

Your videos are always educational and helpful. I've found that using your recommendations for the R7 setting was a great choice for me, so thank you. May I ask a question? After updating my Mac iOS, the Uniden tool on Mac seems to be underperforming. Have you encountered this issue?

[@VortexRadar]

Yeah there’s an issue with Sequioa, but Uniden is working on a fix for it with updated update software.

[@jeffig730]

Any good ones that can pick up signals when the rear of the vehicle is blocked by the spare tire? Specifically a Jeep Wrangler

[@algheroman6476]

Any advice on how to get a replacement display module for an older Max Ci 360? Going through Escort you need to be an AD and I did the installation myself several years ago. The display is no longer clear and barely legible and I would like to purchase a replacement just for the wired display.

[@faceOFone]

Thank you 😎👍🏻

[@davepartlow6430]

I just plugged my Uniden R7 in to check for updates and it's still on version 146, not 151 as you stated. Did I hear you wrong? Is the 151 version a third party undate?

[@WICKEDRADAR]

@vortexradar, remember to switch main head to from 1 to 2 with uniden tools software on uniden r9 when you test it in several days in TN

[@bhstennis04]

No new RxW announcements from Uniden at SEMA. I bought an R8 on Woot, but returned it right before SEMA. The new version will of course launch at some point, but the same sale is back, and I’m debating if I should just reorder the R8 again.

[@kerrylittle3900]

Question. The Uniden R4 is half the price of the R8. Is it worth double the price? Can you explain what’s the difference please? Thanks. Great videos.

[@VortexRadar]

Uniden R4 vs. Uniden R8: Head-to-Head Comparison kzbin.info/www/bejne/noa5q6aGZ8SkrNU

[@gregspark9845]

I run both in different cars. The arrows is the big difference but if I was buying just one, it'd be the R4. Just as good at detection, smaller, cheaper.

[@kerrylittle3900]

@@gregspark9845 thanks

[@392nightrunner]

R4s been abandoned by uniden, hasnt seen an update in a couple years

[@mikeh6564]

​@@392nightrunnerapparently recently updated

[@lyfandeth]

But you're still recommending the Uniden R8 as best of all?

[@ZionistInfidel]

Thanks for the heads up on 1.65 for the R3, just got it updated and hadn't in a couple years!

[@bobbyoberoi4090]

Question ??? I updated Uniden R7 (hardware 1.1.1) using Firmware 1.47 bug fix version previously. Should I update to newly released firmware 1.51? What are the differences?

[@robertalcala1385]

Cool new radar detector 😊

[@Oakcitymedia]

Settings for the Ri paid $440 for the R7 just had it hardwired and now getting the bend mount for it. Is it worth the purchase, I see they keep updating the R7.

[@VortexRadar]

The R7 is awesome. I’d keep it. :)

[@Oakcitymedia]

@@VortexRadar Thank you. For updating it, do you have a tutorial on your site?

[@robertcrouch7328]

I have an older valentine V1 and suffer with tons of false alerts in town, but on the highway it’s amazing… but false alerts on cars with side mirrors radar and some vehicles keep sending out their rear radar always. I missed the opportunity a few years ago to send it in for 100 bucks and get it totally updated. They’ve done away with that. It cost prohibitive as is the price of a V2. I wish there was a way to add some apps to make it more versatile for me. I have the remote display and I catch the power in my glove box.

[@perfectjays]

Question. Would a magnet affect how a radar detector functions? I bought one from a buddy and he lost the mount that came with it so he used a magnetic phone mount and put one of the metal plates that come with it on the bottom of the detector and that’s how he had it in his car. Would that affect anything? I ordered a hardwire kit and looking at a mirror mount

[@vancity2349]

Thanks Vortex I have owned an R3 R7 and run an R8 currently. Agree with you and disappointed no updates for the R8???

[@michaelaugust9021]

I noticed when you look at the settings on the uniden app on your computer they call it "WEEK" not "WEAK" :P

[@Cappilot1]

I"ve been planning to buy the Uniden R4 but now I'm changing my mind based on what he just said about no updates in a while.

[@VortexRadar]

The R4 just got an update recently

[@Cappilot1]

@@VortexRadar Thx for responding!

[@belarus27]

Just bought my R7 last week, and uses it on the way from SC to AL. waiting on custome SW 1.57 international

[@JohnWalsh2019]

How'd it perform for you? Thanks!

[@omarnokaira5518]

is spending 5.4k install and uniden r9 unit too expensive for professionals to install?

[@Byrdro]

Great channel, love your videos! I can't seem to find one video comparing the volume of the different detectors. Based on the advice you gave in one of your videos, I purchased the R3 but it's not very loud. Any advice on, or do you have any videos comparing the volume of the alerts? Thanks!!

[@VortexRadar]

That’s not something I’ve ever compared. You can compare max volumes, how easy alerts are to hear over the music, reliability (some speakers used to blow when run at max volumes for extended periods of time), use apps to pipe out audio to other sources, etc. Just not something I’ve ever wanted to devote time to. Lots of other people could do that if they wanted though.

[@hylander40]

For the R3 and R8, would downloading any updates wipe out third party settings, etc such as mitheru and so forth?

[@cog971]

Should I wait to buy a Uniden R4 or R7 until the WIFI edition comes out or will a firmware update be able to add that feature?

[@brianthayer8461]

Is 1.65 available for the R1 as well, minus the GPS functions. Those mazdas are killing me.

[@VortexRadar]

Doesn’t look like it. www.uniden.info/download/index.cfm?s=R1

[@Zavestang]

Man I REALLY want that Mazda K Blk 3 on the R4 its by far my biggest source of falses. but @vortex I saw your testing with the K guns, and IIRC your guns was spot on 24.124, so at least it could be dangerous with THAT gun.

[@ZboeC5]

That's a super dangerous frequency to block, I've seen numerous K-band guns right at 24.124. I could see reducing sensitivity in that exact frequency range but blocking it entirely is going to cost you eventually. Damn Mazda...ugh

[@tompinnef6331]

Thank you for the update video. Spinner

[@KiceDz]

What radar detector do you recommend for Europe (Eastern Europe to be exact and Germany) ?

[@BxKash]

Hey @vortex is there any new update coming up for the escort max 3 ?

[@VortexRadar]

Sorry, my crystal ball is broken. 😄 You can always ask Escort.

[@Grizzly50450]

So here's a problem I had with my Redline 360c last month. I was cruising down I-90w in New York close to the Pennsylvania state line when a New York State Trooper shot me with laser. The radar detector never even made a peep, didn't go crazy and say laser like it normally does, never detected it. I had been down in Alabama about 2 weeks earlier and I was hit with laser more than once and it went off every time. Now I understand that when I get shot with laser without laser jammers they already have my speed before I can slow down, but the notice is always nice. I had never been shot with laser in NY (or at least to my knowledge) up until this point. But the detector not going off kind of screwed me because I couldn't see the trooper as he was bush whackin and I never even slowed down. Caused me to get a ticket for 81mph in a 65mph zone. So that was nice... makes me want to get rid of the Escort and get a Uniden. I have over $1,000 in this detector because I had it sent in for repair about a month before this. So I just gave them $230 to fix a non detection problem coming from the rear. Then A MONTH later it doesn't alert me to laser. I am NOT impressed right now. Makes me wonder if this is some new kind of laser gun that it can't detect? Ticket says I was hit with a laser model Tru-Speed. I can't even get ahold of Escort over this problem. I call their customer support and it goes to voicemail. My rant is over I am just annoyed when I have well over a thousand dollars into a radar detector that is supposed to have laser detection then it doesn't detect laser. Oh and I have 3 of these things, awesome.

[@VortexRadar]

Sorry you’re finding out the hard way but radar detectors are the wrong tool for laser. What you experienced is very common. You need a laser jammer to go with your radar detector.

[@Grizzly50450]

@@VortexRadar Yeah but still should alert me and say I was hit no? It always has in the past. I am putting money into laser jammers after this for sure though.

[@printingwithpeek4897]

​@Grizzly50450 Why can't you read? Bro. A radar detector isn't going to be as equipped as a laser jammer which is designed for laser specifically.

[@PeakedHill]

@@printingwithpeek4897it still should have detected and sounded a laser alert Bro. I have the Redline and it’s better than my Max360. The best part of Escort is the crowd source and it’s speed camera database

[@printingwithpeek4897]

@PeakedHill No it shouldn't have. A laser and a sound wave are two separate modes of transfer. You have no idea of what you're talking about.

[@oSnapMillerTime]

My R3 won't switch to auto dimmer anymore after the last update. I factory reset it and it worked for a couple of days then started not auto dimming again.

[@MattH-wg7ou]

Anyone else's Escort Live stopped getting PSLs both in the app and in the detector? I updated it. But it just shows dashes in the app and in the detector. 6 month old Max 360 MkII.

[@freddonahue7582]

A friend of mine told me that some bling spot monitoring systems now use Ka band frequencies. Is that true? Just wondering....

[@smiless1451]

Is there a update for Uniden Dfr7 mines don’t even detect ka or k anymore lasted a week and stopped

[@wcmontana]

Great video thank you! If I only care about KA range & sensitivity on the highway in NY State, what detector is best? I turn off K & X band. Thx!

[@ZboeC5]

Uniden R4/R8 depending if you want front only or front/rear with arrows.

[@Alex-nq8xb]

If you buy it recent does it come updated?

[@VortexRadar]

Who knows? When was the latest update released? When was the detector built? How long has it been sitting in inventory? It’s a good idea to check for updates whenever you update.

[@Grumpyoldman666]

I’m a complete noobie with detectors and purchased a Valentine gen1 v2. I updated the firmware already. Is using the V1 companion app worth it? Do I use it at the same time as the V1 connection app?

[@VortexRadar]

Yep! Very helpful to run with the V1

[@jimthompson2085]

how do I mute "Start-up" sounds on my V1G2, I can't see how?? I did the 9-2024 update.

[@VortexRadar]

You need to disable the startup sequence. www.vortexradar.com/2020/03/how-to-program-v1-gen-2-v1connection/

[@wadahn.8847]

Any hope that valentine one G2 will have mrcd/mrct detection? Unfortunately many radars are based on mrcd/mrct which Valentine one G2 can't detect them ... I believe Genevo Max is the best

[@b00573d]

It's a shame how Radenso completely fell off the radar. You dont hear anything from them anymore. They were so vocal with the launch of the DS1 and then all the development talks about Theta and then nothing. Complete silence...

[@wmoID]

Theia!!!! @vortex

[@Mike-Capz83]

i really think Uniden should put auto sensitivity on the r7, i would love it and I'm everyone else would too,

[@g.k.1669]

As an owner of a R-8 and R-4 but not the owner of a computer, what are the possibilities of an app by Uniden being created to allow the detectors to be plugged into an Android phone to download new versions? Is this even feasible?

[@andrewmoss281]

Which detector are you currently running?

[@andrewoxner2941]

I live in Indiana, And I generally don't travel to farther than Kentucky and Illinois in my car. Bottom line which detector will give me the best protection?

[@Pallidus_Rider]

Would like to know which detector integrates best with car stereo

[@VortexRadar]

The Escorts are traditionally the best for that, depending on which stereo you get, but I wouldn’t necessarily pick the detector for that reason alone.

[@samidpersia9832]

For the R7 new update can you give us the whole advance setup? I have a Mazda cx 5 so it's really annoying lol.

[@VortexRadar]

haha use the K Block for 24.123-24.124. You can start with a low number for sensitivity like 1.0 or something and if you get a false, raise the threshold up a bit. Keep going up until the falses all go away.

[@abby11118]

R7 version 1.51 update and now random GPS errors. Any ideas about that?

[@teodorppetrov]

I get the same errors

[@j2w1_lub]

random question, but as some of the radar detectors you mentioned are angled toward the drivers seat on the left hand side of the car, is there models for countries (e.g. where i'm from) that have the steering wheel on the right, that flip the screen towards the drivers view on the opposite side of the car?

[@VortexRadar]

Not that I’m aware of, but I’m also by no means an expert with alllll the different Radar detectors around the world.

[@TuXicity]

In NZ, we suffer from this same issue being a RHD country, but you can still use the likes of the V1 Gen 1 & 2 and the Uniden R7 & R8 and it's still completely legible reading the displays albeit a bit inconvenient. If you want something that is more designed for you then something like the Uniden R3, R4 or Genevo MAX which have straight displays would be an ideal choice. Maybe one day RHD markets will get some love with an angled option towards us!

[@mattmanyam]

Valentine offers a remote display that you can put wherever you want.

[@j2w1_lub]

@@mattmanyam i was thinking more of the unidens but thanks for the info

[@j2w1_lub]

nice, i heard it's wonderful in NZ and you guys have more sheep than people right?

[@cb1nof]

Hi Ariel, sure the interview is more than interesting if you have the opportunity to do so

[@jimilee459]

Do you prefer the R3 paid firmware from the forums still? That what I run on mine.

[@VortexRadar]

For the R3? 100%

[@ACURACALABAR11]

What the best radar for canada. Most stealth.

[@swankperfection]

When’s additional testing going to be done on V1’s 1035 update? There’s been very minimal feedback on it and with varying degrees of likes/dislikes. It’s impossible to know if the update is good when nobody is doing any credible tests with it. Hell, even Bloovy hasn’t updated the firmware thread with it, so that doesn’t speak volumes for it. Some people say it’s good, others say it’s causing more K noise. So what gives?

[@Whatzitmatter]

Bluetooth is fast enough for wireless lidar jamming? That's interesting - I'll have to hunt through your archives to see how prior units fared.

[@mramosmix]

I can't believe it no update on Theia....😂

[@ZionistInfidel]

It's a mythical as the mother of the moon it's named after :)

[@saltysteel3996]

It's a DoD contract now. Will never come out for civilians.

[@printingwithpeek4897]

​@@saltysteel3996 no it's not.

[@yayinternets]

The website has the best up to date information: "The pre-order and official release date for Radenso Theia is still not set due to the global parts shortage caused by COVID-19. Please sign up for the e-mail list above to be notified when pre-orders begin." 😂

[@PacificOceanQuest]

There was an update on the Uniden R8 Oct /02/24 latest version 135.109.122.

[@VortexRadar]

Yep, that update was discussed here: Uniden R4, R8, R9 Updates: K Blocks, Autolockouts kzbin.info/www/bejne/aGGydqiMq5qSmtU

[@morganb1969]

How do I get the Mitheru download?

[@cxavierc21]

I don’t understand what part of adding a kblock for the Mazda cx5 took the R7 team like 4 years. Is it more complicated than just writing If(freq. = CX5kblockRange) Then don’t alert

[@JohnWalsh2019]

Lol

[@teodorppetrov]

What’s the best way to contact you? I asked a question a week ago below!!

[@VortexRadar]

Sir, it’s not realistic for me to respond to every single question. I used to try and it didn’t go well. Need Tech Support? Watch This First. kzbin.info/www/bejne/oYS4qIV_h7Wqp7M Burnout... What I'm Learning kzbin.info/www/bejne/m6u5pGWBhciabZo

[@teodorppetrov]

@@VortexRadar okay… sorry to bother you with my question regarding the content you posted about. I’ll keep searching.

[@10004488473]

I just got the R8 brand new on Woot for $549

[@tuberadar]

6:58 Re: 1.51 the K-block levels automatically change to match the selected mode when changing between highway and city modes. ~This can't be set to be done. It's automatically done.

[@VortexRadar]

How does it work exactly? I was reading the changelog notes, but I don’t get exactly how it works.

[@tuberadar]

​@@VortexRadar I tried to respond with an explanation including a link and KZbin keeps removing it.

[@fritsklatten]

Can you test the Neoline 8700 S

[@VortexRadar]

It’s funny how whenever I mention anything about international detectors, and even if I explicitly say that I don’t test or review them because they don’t make sense here, I get lots of requests to do so anyways. I really wish more people would take the initiative to test and share info like that. I can’t do everything for everyone, even if I wanted to.

[@bwxmoto]

I bought two DS1s when they first came out. They are nice little detectors and work well but I'm pretty miffed about the lack of support and updates from Radenso. If I had known they would basically just disappear after releasing them I would have gone with Uniden. I won't ever buy another Radenso product after all the talk about future features and updates and then basically ghosted all their customers. For instance they said they planned on a FW update to allow you to run the detector upside down so you could use the top mounting hole on the bottom which would be great for the one on my bike. That update never came and probably never will now.