NEW! Veto Pro TP-LD Blackout - A Mix of the TP-LC and SB-LD

[@gasparmora5070]

I been waiting for this bag to be available, good thing i watch your videos because i didn’t get an email from veto telling me it’s now available. Thanks for the heads up, i just ordered mine 😬.

[@MORGANSMaintenance]

Yeah good to go ahead and get a DP3 if you were wanting one 👍

[@89dhvac]

This is great, they finally made one of these with a wider base so it doesn’t fall over all the time! Now we need a wider base on the tp4b!

[@MORGANSMaintenance]

Yeah I see this as an upgrade to the TPLC. I didn’t have an issue with it being as tippy as the TPXL… but I could see that being a thing.

[@89dhvac]

@@MORGANSMaintenance I’m using the tp4b as my main bag for commercial hvac service and it’s awesome, but it tips over ALL THE TIME! lol veto, I hope you read this!

[@MORGANSMaintenance]

@@89dhvac I used to use the TP4B as my main service bag. It is a great option, holds a lot for its size. I’ve got so many bags now it’s moved into my house. I often sell my extras, but it was so good when I used it I always thought I’d go back to it. I’ve not tried a 5 or 6B

[@MattHmm-rq6dn]

Of course do loadout video! I really do like the black and this was catching my eye in the beginning if the promo but was out of stock so I got something else for the dp3. This is one of te few bags the v swap pannels really is appealing. I would like to see what our current setup would look like in that and you may have talked me into another bag. Plus it's black!

[@MORGANSMaintenance]

Yeah, the promo still going pulled me back in. I’m interested in that DP3 for a meter/tool pouch. Going to see how that works out

[@MattHmm-rq6dn]

So is that a commitment to a loadout video?

[@MORGANSMaintenance]

@@MattHmm-rq6dn I will try and do one before the promo ends if I can.

[@MattHmm-rq6dn]

Check out rays apartment maintenence recent video he's using a car detail seat from hf and it may cause me to reccend my comments on mechanics seat for outlets. It may be a excuse for you to go to hf?

[@MORGANSMaintenance]

@@MattHmm-rq6dn I will see if I can find it. I’m subscribed to him, but his stuff doesn’t hit my recommended often either

[@marcouki]

Nice video thanks

[@MORGANSMaintenance]

@@marcouki 👍👍

[@jaydoherty8402]

Nice bag. It’s a little more similar to the TP-LC than I expected, but definitely seems like a nice upgrade/refresh to that bag.

[@MORGANSMaintenance]

I thought the same thing when I opened it.. I was like, I’ve seen this before 😂 It is a little more roomy and less tippy (not that I had a tippy problem with the LC). Big advantage is removing panels if you want for options. I do feel like it’s definitely more like the TPLC than the SBLD I’m sure they will likely do a LC Blackout at some point.

[@k1_w3]

I bought the MP2X based on your comparison video of the MPX/MP1X/MP2X. And I just ordered the Tech Pac Blackout. Definitely do a load out of the TP-LD Blackout. I’m also more interested in that than the SB-LD because of the cover.

[@MORGANSMaintenance]

I may have some time to move some tools around one day… I still haven’t got in my MB5B yet 😂 I love my MP pouches, I use them more than anything

[@jpy74]

You’re such a bad influence. I’m just a home DIY’er, but your excitement and review over this bag made me go out and order one. Thanks for the heads-up on the promo. Got that, too.

[@MORGANSMaintenance]

It’s going to be a good bag… I’m still on the fence of it I like the SBLD or the TPLD better, only time will tell. Put a cover on the SBLD and it would be hard to beat, but I definitely like the TPLD better than the TPLC. They both have their advantages depending on what you want to do with them. I got my DP3 yesterday… I may end up liking it more than all of them 😂 The promo time is always a good time… splitting the cost between two bags makes it doable 👍

[@MORGANSMaintenance]

I filmed a video tonight moving my tools from the SBLD to the TPLD to see how they fit for people to get an idea. I may be able to put it out tomorrow

[@MattHmm-rq6dn]

Thank you 👍 the only thing we can't veto is the strain on our wallet we make it happen when it comes to new tool bags.

[@Stefan_Kawalec]

So if you found a perfect bag, do it mean you won't buy any more? Wink, wink... Very good review. If I wanted to buy any of those this video would tell me everything I need to know.

[@MORGANSMaintenance]

There’s always the next new one 😂… we will see next spring what kind of arm twisting they do. I definitely won’t buy one till then.. I think.

[@Stefan_Kawalec]

@@MORGANSMaintenance I've made a terrible mistake with that "do it mean". Sorry. I like when a bag/backpack/shoes, especially the ones I use in work, don't change. I wish some models of shoes were made for 100 years. So I usually not only don't wait for the next model, but I'm rather anxious what they gonna spoil in the next instalment.

[@MORGANSMaintenance]

@@Stefan_Kawalec my brain read right over it.. it read, does it mean.. wouldn’t have even know had you not said anything 😂 I have those thoughts with certain things as well, they more often ruin things instead of making them better. Pretty rare that the sequel is better than the original.

[@easilyamused3049]

Hey can you measure the internal dimensions of the tp-ld with the vswap panels removed? it looks like a perfect design for something i have in mind

[@MORGANSMaintenance]

I got you on the short comment 👍

[@OnusBones]

Love it! Mine should be here today. Another huge difference is the SB-LD is missing the interior side pockets on both sides that BOTH TP-bags have. Veto could add those to the SB-LD for a huge improvement for carrying smaller tools, bits, or extensions.

[@MORGANSMaintenance]

Yeah, you can tuck stuff in there on the SBLD, but it’s hard to get out. You definitely can’t stick a pair on 10” cobras like you can on the TP’s

[@wackyweyland8857]

Excited for next year's promo 😂😂😂😂

[@MORGANSMaintenance]

I’m not sure if I am or not, this years cost me 😂 It only cost me for a little while though, I will definitely have to offload some bags this year, but that’s hard to do while the spring promotion is going on

[@OnusBones]

I am too, not that I need another bag! Funny thing is, chances are it will be the free bag that interests me most.

[@wackyweyland8857]

@MORGANSMaintenance You'll sell your spare bags so it won't be as bad. As a first year customer, Veto made some money off me, too. 🤣

[@MORGANSMaintenance]

Yeah, I keep all my bags clean enough that I don’t lose much on them when I sell them. I basically end up just paying an” small “upgrade fee” most years when it’s all said and done.

[@robertamaya9889]

​@MORGANSMaintenance when does the promo usually start? I'm looking to buy now but I'd rather wait for the promo.

[@rguevara83]

I just received my TP- LD. I absolutely love it. I was currently using an overstuffed MB2 blackout for HVAC. The replacement bag fits all the items I had in my previous bag, but with better organization. I was very close to purchasing the Veto TP-XD based off your video. The Spring promotion came around and saw pictures of the TP-LD. I could not decide between the two bags because they are very similar, but I decided on the. TP-LD. One of the bags is wider and one of the bags is deeper. Could you do a video comparing and contrasting the two bags. I was curious as to whether or not the items that fit into a TP-LD will fit an into a TP-XD?

[@MORGANSMaintenance]

If I had a TP-XD I would, but I don’t have one of those. Maybe someone on here does though and they can give you an idea. I never liked the MB bags for tools for the reason you said… hard to organize since it’s mostly just open space

[@adjutant]

on the front of your SB-LD, what's that you've got on your measuring tape holder? some kind of attachment for morale patches? I would like to know more 🙂

[@MORGANSMaintenance]

I made it out of a scrap piece of Aluminum and a tape measure clip. Then I just put some of the hook/loop stuff on it.

[@Nainoauyeno_]

You done did it again..

[@MORGANSMaintenance]

😂… 👍👍

[@Nainoauyeno_]

@@MORGANSMaintenance making me spend more money on stuff after watching your videos 😂

[@MORGANSMaintenance]

@@Nainoauyeno_ I have to drag you all down with me 😂

[@MattHmm-rq6dn]

Look shinny 🎣 almost gotcha

[@georgedavall9449]

VETO City !!!!!!!!!!!!!!!!!

[@MORGANSMaintenance]

It’s going to be a Veto Video Week…. I have two more coming (videos not bags 😂)

[@ovidiuandrei8087]

Will the v-swap front tool panel fit inside the TP-LC size wise ? It’s one of the features I like on the new bag and I’m thinking of retrofiting it to my TP-LC (perhaps cutting off the two inside small pockets and sewing some velcro to which the v-swap panel can stick). Thx

[@MORGANSMaintenance]

It is the same size area, so it should work if you wanted to try it

[@lockhammer3481]

I like that TP-LD I have been looking for a replacement for a toolbelt , I’m getting too old to rock a tool belt on my tired old hip, If I carry this with a shoulder strap. It can hold more tools also to keep me from walking back to truck that I can’t keep in a tool belt. I usually keep my tools in the trunk and have to gather them up after they spill out. I think I’m sold I’ll gift tool belt to the young guys.

[@MORGANSMaintenance]

It does look like a nice medium sized bag… one you can’t make overly heavy 👍

[@NicolasMuniz-n8g]

Its only money, one can never have too many Veto bags, OT-LC for plumbing, SB-LD for light HVAC troubleshooting in my SUV, Tech MCT and TP-LC in Svc truck plus each vehicle gets an MP1X for little stuff and a bunch of back ups in my tool room. Plan on getting TP-LD with DP3 before end of promo.

[@MORGANSMaintenance]

That’s what I always say.. it’s only money… I can make more. You have to enjoy things or what’s the point 😂

[@myHVAClife]

Co-worker Bought a new bag, got the SB-LD free and sold it to me for $60. My opinion, it is the best of the 3. Not concerned with the cover. If it is going to rain I grab my TP-XXL. SB-LD is a great quick grab option. I have a Tech-MCT, TP4B, TP6B, TP-XXL, and the SB-LD. Veto has enough of my money, hope Roger enjoys his bank statement. LOL. They are good bags.

[@MORGANSMaintenance]

I’ve been liking the SBLD so far… I like closed bags for the weather and for appearance, but I do like that back section of the SBLD. My opinion is The TPLD is more of a TPLC upgrade now that I’ve seen it in person. It’s a little bigger, so the LC might fit someone who wants a small footprint bag better… but I use my MP Pouches as my small bags now. They do make good bags. The deal you made is an option I always recommend to people during the spring promotion. Find a friend who wants a bag and make a deal 👍

[@OnusBones]

You're one of those who turned me on to Veto bags around the beginning of the year, with some of your videos and the giveaways. Still, I don't know anyone who can inspire the emptying of a wallet faster than Joey Morgan, PhD (today's purchase was a laser-level, although a lot cheaper than the one he showed). The TP-LD is a perfect computer tech bag. The extra room is enough space for a replacement board or two, and unlike the SB-LD (which has that area in the rear box), it has the interior side pockets for smaller screwdrivers, bits, and extenders.

[@Jesus_Strong]

lol, man now I’m really thinking about it!

[@MORGANSMaintenance]

@@Jesus_Strong 😂

[@Nainoauyeno_]

@@MORGANSMaintenance we are also forgetting the main reason for a cover for the bag. It’s too keep the residents little kids from digging through my bag while I’m working 😂

[@Quietvibes07]

Have you ever done a review of your fluke 324? How do you like it?

[@MORGANSMaintenance]

No I haven’t. I’ve had it for quite some time and it would be my Meter of Choice for what I do. There isn’t much I need a meter to do that it doesn’t do.

[@Quietvibes07]

@@MORGANSMaintenance great thank you!

[@shadowulf]

​ I thought that way too, until I got a 376. Industrial/maintenance electrician here. The 376 gets the first look at any troubleshooting or testing

[@bryanbeaulieu9998]

Does the tp-ld have a shoulder strap?

[@MORGANSMaintenance]

No, it doesn’t come with one… or at least mine didn’t

[@llanbull]

Boss man, can you review the harbor freight multitool version of wave made by gordon. I just saw it on their site under new tools. $39.99.

[@MORGANSMaintenance]

It deleted my reply saying I’d check it out, but I ordered one today…. Appreciate the suggestion 👍

[@gonzalez7805]

How much to have a cover put on that bag?

[@MORGANSMaintenance]

I have no idea. If I knew someone locally that could do it, I might would take my LC and see if someone could.

[@saucyg6371]

Maaaan I want this now too. I want the MP2X, but its not as much of a need for me as the Tech Pac Blackout is because i need a durable backpack. Being a commercial electrician, I dont want to be treading my packout around in th dirt or mud for 3/4 of the duration of the job, especially when most of the time i just need my drills and hand tools. I’ll probably pick up the TP-LD or the MP2X for the spring promotion next year. Need to see how that LC fairs in comparison to my TP4b

[@MORGANSMaintenance]

I think it will be a good bag. I got the LC after my TP4B… I think I even have a video putting my TP4B tools into my TPLC to see how they fit

[@saucyg6371]

@@MORGANSMaintenance ill go back and check it out

[@brianmartinez7530]

Did you get the free drill pouch for the tpld purchase?

[@MORGANSMaintenance]

Yes I did. I haven’t got it yet, but it’s on its way

[@three-phase562]

Think I would stick with the SB-LD, I like to have the meter and leads separated from the tools for my loadout. Or I have a separate meter bag, but it is slightly more awkward to carry two bags together than the on SB-LD, which I find nice.

[@MORGANSMaintenance]

I have really liked the SBLD so far. I know I will sell my TPLC likely for now as this definitely replaces it for me. Just for the options of removing things. The TPLC is a smaller bag which is nice at times, but that is basically what I use all my MP pouches for.. I will use both LD’s over time and see if one stands out as more useful… or maybe I run them both, but for different stuff/weather

[@Justin-C]

I'm in the same boat, and glad not to be tempted to buy more! SB-LD is great bag - especially having gotten it as a freebie. That said, I have two wishes to make it 'perfect': a protective flap for the main compartment, and side attachment points like the TP-XXL (my main bag), so I can hang an M12 drill or impact. I might make a flap myself using some magnets.

[@MORGANSMaintenance]

@Justin-C agree with all you said. I like the flap for the rain, but I also like the clean look of a closed bag.

[@three-phase562]

@@Justin-C Looked at the TP-XXL a few times but not indulged myself yet. A cover for the SB-LD would be nice, maybe Veto could make one as an option if there is enough call for it. I also carry tools in the side pouches though, so they are still exposed to the elements unless I go poncho style cover.

[@rjf2732]

This reminds me more of the TP6B that was free in the promo last year but with a cover… They do look so much better in black though! Something you might be interested in checking out if you can get hold of it in the US… Hultafors have a bucket they sell an insert/liner for to create tool pockets. I find it really useful if I don’t want to take all my gear into a site. I leave it empty in my truck then I can just grab exactly what I need and it’s all nicely organised rather than dumping it all in a big open bucket

[@MORGANSMaintenance]

I think it might be a lot like the 6B… I didn’t get that one, or seen it. I will look up the Hultafors 👍

[@OnusBones]

Home Depot had (has?) a bucket-wrap with tool pockets in it; I think we got one, that Sonia uses for garden tools. I suspect the TP-LD will be just about perfect for me, likely with the front pockets removed for some bulk space.

[@MORGANSMaintenance]

@OnusBones I may end up doing the same depending how stuff fits in the sides

[@Soulkking]

Ah three months late, I’ve been iffy about the sb ld, been using it for a month/ originally purchased the ot-lc, but dam bags too heavy for most jobs, so now it only gets used for big jobs, sb-ld gets 90% of the work I do done, but I kinda find it annoying having to open the back zipper to get my meter, might buy this bag.

[@MORGANSMaintenance]

@@Soulkking yeah it’s nice to have things protected, but there is a point where access is nice.

[@gpraceman]

Think I'll stick with my SB-LD. I rather like the rear compartment for my lesser used tools and pouch of bits and bobs.

[@MORGANSMaintenance]

I like that myself too. Hopefully they come out with a similar with a cover

[@coburn_karma]

Get two TP LDs and hook them up like saddle bags.

[@MORGANSMaintenance]

Would look nice on a bike… or a horse I guess 😂 👍👍

[@danyeurgt]

Omg just show us

[@MORGANSMaintenance]

👍

[@Milkym0o]

Not a fan of the Blackout line. I think the original look is more distinct and on site Blackout looks rubbish once it gets a bit of concrete dust sprinkled on it. I also have no desire to be using V-Swap! SB-LD with a cover would make it a perfect tester/2nd fix bag for me!

[@MORGANSMaintenance]

I like the idea of VSwap just because it gives you options, but I don’t typically use it. I like both color options, but I’m like you.. I may actually prefer the OG.. but the blackout bags I have MCT, etc have extra features I prefer.

[@VRCM_Skywarn_XUSA]

I have to use ... A plastic box, in a backpack is good enough. It's just gonna get stolen, by cigarette smoking cartoon characters with daddy/drug problems. ❌🚬 🤡🤞 🎒🪛🛠️❌

[@MORGANSMaintenance]

That can happen depending on where you live… stinks

[@MattHmm-rq6dn]

You haven't seen how I and my other workers keep an eye on there tool bags like there livelihood depends on it. Everything goes back into the bag when I leave in its place. Turns out I don't loose tools it's our version of rhe corvette in the driveway for a retired person.

[@MORGANSMaintenance]

@@MattHmm-rq6dn I have to do that occasionally on job sites where I’m a sub. And working around others I don’t know yet. It’s always hard to tell if they are curious about tools they haven’t seen.. or if they are scoping me out 😂