What's In My VETO Bag 2024 | HVAC Loadout

  Рет қаралды 25,831

Quality HVACR

Quality HVACR

Күн бұрын

Пікірлер: 52
@Nathaniel-dw4kp
@Nathaniel-dw4kp 3 ай бұрын
I love your content man youve helped me through hvac training school and taught me many different paths to find a job and what to do and how to be organized throughout the work day thanks for the help.
@HVACRTECH-83
@HVACRTECH-83 2 ай бұрын
Good for you dude
@tomr3522
@tomr3522 3 ай бұрын
A hollow shaft 11/32 is surprisingly useful with motors. Especially condenser fan motors, those little nuts that hold the studs on residential condenser fan motors are 11/32, its much easier to remove them with the nut driver than a wrench especially when the studs are rusted. Its also useful on the electrical terminals inside larger motors.
@MISTA350
@MISTA350 3 ай бұрын
Put a magnet where the Tape measure could go, and you have a place to hold all of the units screws so they can't "Run" away and disappear...
@KingNidus
@KingNidus 11 күн бұрын
3/8 drill bit with the psychrometers are clutch
@lilalex4194
@lilalex4194 3 ай бұрын
Fire video as always!! We need to see your install bag now
@CMxNovacane
@CMxNovacane 3 ай бұрын
The only recommendation I have is swap the hose out for a small tackle box for wire nuts, 5&3 ampfuses, Zip screws, self tappers, spade connectors, valve cores etc. I was able to find a bass pro shop one that fit perfectly.
@billj4859
@billj4859 3 ай бұрын
I agree. You have to go to the truck for the refrigerant or recovery tank anyway.
@crios333
@crios333 3 ай бұрын
Vero bags, especially the belt clip ons are an essential as a service tech, absolutely recommend this for new techs insted of buying a big ass backpack, especially when you're starting out as a service tech
@frederickdebian370
@frederickdebian370 3 ай бұрын
I found I prefer the MC for service. It's not really any bigger or heavier than these open-style TP series or this one he showed, but it has two sides (for hand tools and meters) that both close with a zipper for a cleaner setup with nothing falling out and no fear of tipping. I had the TP3 but it became too small for a service bag, and I often needed to go grab my big backpack for other tools. Now that I can carry a few more things with the MC, I never need to go for my big backpack besides for big jobs
@HVACRTECH-83
@HVACRTECH-83 2 ай бұрын
​@frederickdebian370 I agree, I started with the mb3 for a service bag, then that got to be too small,went with the tpxd blackout, liked that for a while then turned that into my refrigeration bag with all my probes,ect. Now I use the mct for service and tech pac mc for installs. The old mb3 I store my megger, fp dual port Mano and a fluke psychrometer (dont buy btw) and infrared cam. I gave my first ever veto (mb) to my girl so she could have her own tb to keep in her vehicle, I guess the point is, yes I only like the bags that close up too and you may think you got the perfect size bag rite now, but always end up needing bigger, that is unless the person doesn't do much work😂
@Jayblazey
@Jayblazey 3 ай бұрын
These vids are the best 👌
@thebricklocker9353
@thebricklocker9353 3 ай бұрын
Thanks for showing your bag set up going to make some changes to my set up thanks for the ideas I have the same probes there is no need to label them. There is a colored window that is either red or blue
@OnusBones
@OnusBones 3 ай бұрын
Nice loadout; I really like this one too for computer-related work. You have some outside pockets available; for you I would add a magnetic pickup for dropped screws, a small inspection mirror for looking under boards or into other tight spaces, and a Sofirn IF23 or IF24 flashlight.
@MattHmm-rq6dn
@MattHmm-rq6dn 3 ай бұрын
I'm following you.... kidding you love your flashlights and I defently see that hole in that bag that's begging for a flashlight.
@rguevara83
@rguevara83 3 ай бұрын
Veto TP-LD for the win 👍🏽😎
@bruce5406
@bruce5406 3 ай бұрын
Love the quality of the channel. My veto tech pack weights a shit ton. I might downsize to the layout you got
@Seedavis397
@Seedavis397 3 ай бұрын
Ways a shit ton?
@daeroc
@daeroc 3 ай бұрын
Wheys a shit ton
@frederickdebian370
@frederickdebian370 3 ай бұрын
Try the MC, it holds all the service tools I need but I can still comfortably carry it everywhere. Very clean package since both sides zip up
@Seedavis397
@Seedavis397 3 ай бұрын
@@frederickdebian370 wayze
@aestheticgarage2403
@aestheticgarage2403 3 ай бұрын
Nice! Makes me want to get back into residential hvac just to buy that bag
@SpeedyA0704
@SpeedyA0704 3 ай бұрын
Ive been waiting for this video, but not with 4 months left in the year.😅
@thesilentonevictor
@thesilentonevictor 3 ай бұрын
Good video Zack
@HVACRTECH-83
@HVACRTECH-83 2 ай бұрын
The 11/32 is for power venters and some exhaust fan motors use 11/32 as well, why? Who the heck knows, but those are the only things I've come across with that size,even comercial exhaust fans. Maybe electricians see that size more than us but I'm glad they included it I've used it many times already in the couple years I've had that multi nut driver. The days of carrying 8 nut drivers are long gone
@TaRgEt0ZeRo
@TaRgEt0ZeRo 3 ай бұрын
i use the tp lc , prolly will get the mc tech black out. yours is very similar to the tp lc, which i find a little bit to small, just a little bit. but it's ok but limit.
@IZBONE
@IZBONE 3 ай бұрын
Been waiting for an update
@AaronPowellvox
@AaronPowellvox 3 ай бұрын
I wish there was a short tool bag. All the bags I see are so tall. I know that sounds weird but in my work truck a shorter tool bag would work great. I could modify the shelf where I keep my bag but that’s just too extreme, I’d rather find one that fits my needs. Ole Veto doesn’t have one nor any of the other manufacturers. I think I’ll make my own with leather.
@codestools1528
@codestools1528 3 ай бұрын
What about the clc elections bag?
@AaronPowellvox
@AaronPowellvox 2 ай бұрын
@@codestools1528 checking their website and one of them might work. Thanks for the suggestion.
@Balticblue93
@Balticblue93 3 ай бұрын
Right on, another commercial! Just what we wanted. This is still an HVAC channel, right?
@jackveale4072
@jackveale4072 3 ай бұрын
This is hvac related, a lot of us enjoy seeing what other tradesman carry and inspiration for new tools to improve our every day.
@borshardsd
@borshardsd 3 ай бұрын
​@jackveale4072 yeah I do enjoy it but that bag needs some more dirt on it
@shellz5437
@shellz5437 3 ай бұрын
First and luv ya content
@HVACRTECH-83
@HVACRTECH-83 2 ай бұрын
Man zac youre lucky to have got your fp crt's back when you did. I ordered 2 of the dual valve ones back in early march of this year, no word on if they will even ever come in. Pretty nuts as like you im a huge fp guy,been using them for close to 20 years and this has never happened with any product release. Im a bit takin back about it because fp wont even give any info to anyone about what happened. How do you like yours? Are they as good as the appions? I have 6 of those,the best ive ever used,but really want the 2 valve ones
@mynamesdoom
@mynamesdoom 3 ай бұрын
What shelving system do you have in the back there?
@Toptech92186
@Toptech92186 2 ай бұрын
Make one for gloves
@FLY_GUY_JZ
@FLY_GUY_JZ 3 ай бұрын
I will be entering the trade in a few months and was wondering how important it is to have metric socket sizes? I know Klein makes a metric version of the 7in1 nut driver and was wondering if it’s worth picking up?
@user-uo3yu4sj9n
@user-uo3yu4sj9n 3 ай бұрын
It’s not that common at all. But if you want Home Depot sells a silicone makita socket set in both metic and standard and it’s An amazing set for what we do that will fit in a lot of tool bags
@MattHmm-rq6dn
@MattHmm-rq6dn 3 ай бұрын
Your preaching to the crowd that uses sblds Here. I use mine as a quick bag as well and it's much more crowded than yours. I applaud you you keeping it so light. You know you can combine both of thoes multi bit screwdrivers to make a super screwdriver? Thr surge is long in the tooth but thru haven't made a replacement for it yet and mine is just out of warranty at 5+ years. I'm also surprised to not see a magnetic bowl holstery magnet on the clip for holding your screws. They even make magnetic hooks that are super strong too you can put on the side of a air handler then hang the bags from that. I fit a surge plus a simple small milwaukee auto ranging meter in the back pocket of mine with a coil brush and other goodies as well there's more room than you think. Over at Morgan's maintenance we are experimenting with ways to add magnetic mats and parts trays to our sblds through the fabric or on the outside. That channel is a great resource for sbld loadouts and ideas. Thanks for the video good stuff!
@charlesleake930
@charlesleake930 3 ай бұрын
Great vid !!...how to get in touch ? maybe your company name ( even if you put it out in code ) would be cool ...
@WayneDolan-tl1xu
@WayneDolan-tl1xu 2 ай бұрын
Idk for me the bag just to awkward may be good for a ground level tech it’s definitely not suitable for caring on to roofs
@FredBen-p7h
@FredBen-p7h 3 ай бұрын
Davis Gary Young Kenneth Lee Laura
@user-uo8cd6de8d
@user-uo8cd6de8d 3 ай бұрын
Are you hiring?
@WallaceAubrey-b2m
@WallaceAubrey-b2m 2 ай бұрын
Jackson William Harris Ronald Lee Maria
@MorganJill-r9b
@MorganJill-r9b 2 ай бұрын
Johnson Jennifer Moore Patricia Wilson Mary
@HenriettaDennis-z1f
@HenriettaDennis-z1f 3 ай бұрын
Martin Dorothy Gonzalez Edward Lewis Helen
@HarryTabitha-g2b
@HarryTabitha-g2b 3 ай бұрын
Hall Lisa Hall Jeffrey Jackson Eric
@LockeIda
@LockeIda 3 ай бұрын
Gonzalez Donald Moore Patricia Gonzalez Betty
@ΗλιαςΜπελος-σ1ψ
@ΗλιαςΜπελος-σ1ψ 3 ай бұрын
Facom are better
@AaronPowellvox
@AaronPowellvox 3 ай бұрын
Fagcom has their bag measurements in metric. Automatic fail.
@CecilliaChapman
@CecilliaChapman 3 ай бұрын
45954 Dessie Cape
What's In My VETO Bag 2023 | HVAC Loadout
28:04
Quality HVACR
Рет қаралды 150 М.
Typical HVAC unit LEAKING refrigerant & How I Fixed it.
17:37
Quality HVACR
Рет қаралды 52 М.
Enceinte et en Bazard: Les Chroniques du Nettoyage ! 🚽✨
00:21
Two More French
Рет қаралды 42 МЛН
BAYGUYSTAN | 1 СЕРИЯ | bayGUYS
36:55
bayGUYS
Рет қаралды 1,9 МЛН
Veto tool bag loadout - Basic household repairs. Tech-MCT
32:07
Tyler Lorenz
Рет қаралды 85 М.
Digital HVAC Gauges or Wireless Probes | Which should YOU buy??
17:00
Comparing & Testing Several Valve Core Removal Tools
29:01
Reliable HVACR
Рет қаралды 23 М.
Ultimate HVAC Service/Install Van Tour!!
28:36
Quality HVACR
Рет қаралды 113 М.
THE OTHER COMPANY COULDN'T FIGURE THIS ONE OUT
34:23
HVACR VIDEOS
Рет қаралды 77 М.
Veto Pro Pac MB5B - HVAC Loadout
23:03
Sylok, The Defiled
Рет қаралды 13 М.
Sometimes it just DOESN’T go your way…HVAC Repairs
9:39
Quality HVACR
Рет қаралды 14 М.
TOOL BAG SETUP EDC | Veto Pro Pac TP-XXL Loadout
20:00
Everyday American Patriot Co.
Рет қаралды 6 М.
Tool Bag Setup DIY EDC Beginners | Veto Pro Pac TECH-MCT Loadout
21:35
Project Pine Hills
Рет қаралды 74 М.
Enceinte et en Bazard: Les Chroniques du Nettoyage ! 🚽✨
00:21
Two More French
Рет қаралды 42 МЛН