Skipped over the thing I was waiting for... pulling out the extension shaft
@KyleHallwoodworker2 жыл бұрын
Sorry man
@IkanKarv4 жыл бұрын
Thanks Kyle, enjoying your videos, keep up the great work. Cheers Bap
@MyLifeThai371 Жыл бұрын
I just got done using mine to cut some screw driver slots in bolts. Worked great! Only paid $26 new on ebay with the flex shaft.
@KyleHallwoodworker Жыл бұрын
Awesome!!
@jasmineparra88763 жыл бұрын
I just bought a rotary tool kit and have been so excited to begin. (: Hopefully I do well!!!
@KyleHallwoodworker3 жыл бұрын
You got this !
@xzavierandre293 жыл бұрын
i realize Im pretty off topic but does anyone know of a good place to stream new tv shows online ?
@jaxtonjerry66853 жыл бұрын
@Xzavier Andre I use Flixzone. Just google for it :)
@zekeashton29993 жыл бұрын
@Jaxton Jerry definitely, been watching on Flixzone for years myself =)
@xzavierandre293 жыл бұрын
@Jaxton Jerry Thanks, signed up and it seems like they got a lot of movies there =) I appreciate it !!
@alexandermorrison23774 жыл бұрын
Not bad Kyle
@felixf52114 жыл бұрын
You mentioned having a Foredom. I do, as well. Haven't used my Dremel-like rotary tools since buying it.
@KyleHallwoodworker4 жыл бұрын
I like my Foredom allot ! I have to admit sometimes I need something more mobile so the Dremel or similar come in handy.
@janawest71863 жыл бұрын
I got one at hobby lobby. It’s same price as yours. Missing a lot of what yours has. No book, I don’t know how to do anything!.. I’m taking it back. Yours is better.
@silentvoiceinthedark56652 жыл бұрын
Enjoyed the video, has it kicked the bucket yet? I just ordered on from Amazon after seeing your video.
@KyleHallwoodworker2 жыл бұрын
Thanks for watching . Ummmm not sure I gave it away to a subscriber here on KZbin last year .
@silentvoiceinthedark56652 жыл бұрын
@@KyleHallwoodworker I was actually thinking about buying this for my ex wife, she practicing dentistry on her self.
@KyleHallwoodworker2 жыл бұрын
@@silentvoiceinthedark5665 🤣😂 perfect !
@judymccart30793 жыл бұрын
How do I lubricate the flex shaft? The instruction manual says use multi purpose grease? What is multipurpose grease. Thank you. I enjoyed the video.
@knowitallproductions1178 Жыл бұрын
I just put a “splash” (5-7 drops) of KY lube either directly onto the shaft, and then make sure to work it up & down the entire length of the shaft, as well as fully around as well. More is far better than less Esp when it comes to the tip of the shaft, and I’ll often deliberately apply the lube to the shaft while it’s in close proximity to the work piece, in this way a bit will fall into the workpiece and that will smooth out any hard or rough penetration moves that otherwise take precious time to build up to. A generous slathering of such a light lube on your shaft and your work-piece, be it a hook,slot,w-horie (wood(based)-hole opened (by) ramming inside energetically), or even a pipe lay into a dark recess yields better insertion, penetration, performance and productivity with your shaft. When, out of necessity (budget, time = money, last min job, competition attempting to poach your work, client having repeated dissatisfactory with current contractor, etc etc) the situation calls for rapid, high speed, high torque, immediate complete shaft insertion to bottom out, using the alternative back door for exceedingly worn primary cutout, or even the dreaded low battery remaining and no backups on hand, as well as when the client is in need of the job to be completed and doesn’t care about any damages or deformations caused by rough tool usage that commonly leads to,sacrificing on the details in favor of ensuring that the hole is fully filled, and with sufficient force that even if a smaller tool is used hard on the working piece, the client will only summon you from then on out. A handyman generates leads & cultivates them by providing quality materials quickly (same day delivery of hard wood), by becoming an expert on how to wield their flexi-shaft to fit every customer’s individual needs well, and knowing when to really hammer the customer’s gaping opening with a special “fleXXX shaft”, and by simply incorporating these foundational practices into YOUR workflow, you’ll find that you barely have time to practice working your shaft on your own due to how frequently your services are being booked. While that is a magical & exciting time, it’s important to remember how easily one can badly damage their shaft if they aren’t careful, as well as how quickly you can go from blowing up to bankrupt if you become so rushed, stressed, and/or overworked that you repeatedly have to leave a job unfinished due to battery drain, or when you overdo it on the rapid penetration technique, leading to a very common phenomenon where you finish quite wuickly, but the client isn’t satisfied. Just remember, the longer the shaft….. the more lube and additional tool maintenance that will be required…
@daveholte76587 ай бұрын
Bought a Wen Amazon $18 put flex shaft on unit Installed the sand band just try. Would not turn. The sander. Seems like the cable shaft/ tool is slipping…Hmmm I have had numerous rotary tools that lasted 20 years. Maybe less quality these days
@tammygurl644 жыл бұрын
This looks pretty good especially with the light and shield attachments. That's clever how you used it as a router! 👍 I like the hard plastic case with the older ones but the case isn't the most important thing. ....❓Is 1.4 amps better than the ones with less amps?❓ I'm considering this purchase because I'm starting to learn metalsmithing and need an affordable (and good) option... one with a flex shaft for sanding and polishing jewelry. It looks like I could find many uses for this. Thanks for sharing! 🙂
@angelajammer4759 Жыл бұрын
Does this burn wood??
@KyleHallwoodworker Жыл бұрын
No this is a rotary tool it carves and sands
@markrhine51164 жыл бұрын
i received my dust stoper and rx mask off your channel awesome . can you do torio on the foot bench ?
@KyleHallwoodworker4 жыл бұрын
Awesome Mark thanks for the support! The jawhores? The bench I use to clamp my chainsaw carvings in ?
@markrhine51164 жыл бұрын
@@KyleHallwoodworker yep that,s the one .
@kenroix49634 жыл бұрын
Great video, exactly what I was looking for. Does the light collar connect to the flex shaft as well?
@KyleHallwoodworker4 жыл бұрын
I don’t believe it does .
@kenroix49634 жыл бұрын
@@KyleHallwoodworker it does not. I finally got it after 3 weeks of waiting, my wife loves it for her nails & I love it for my woodworking.
@teneciahuggins46053 жыл бұрын
How well has it held up since you've had it?
@KyleHallwoodworker3 жыл бұрын
I haven’t had any issues but Honestly have only done light use with it .
@abstractfate61043 жыл бұрын
New to the channel here, I just bought this dremel, being a year old, how has it stood up against father time?
@KyleHallwoodworker3 жыл бұрын
Awesome thank you for the Sub . I will be honest I have only done light use with it . So far so good .
@abstractfate61043 жыл бұрын
@@KyleHallwoodworker that's all I needed to hear. Mine should be in this week, thank ya
@KyleHallwoodworker3 жыл бұрын
@@abstractfate6104 you’re welcome
@timmysharrock57124 жыл бұрын
Keep it on high speed it won't bog down lol
@KyleHallwoodworker4 жыл бұрын
Yea true lol
@keylupveintisiete75523 жыл бұрын
Any updates? (:
@KyleHallwoodworker3 жыл бұрын
Nope don’t really use it . Plan to give it away when I hit 10,000 subscribers
@hosocat14104 жыл бұрын
Has anyone homeowner ever used a tool enough to have to replace the brushes? I havent.
@KyleHallwoodworker4 жыл бұрын
I have not with tools that get light use. I did have to replace them in My die grinder from harbor freight