Newcastle Sewing Centre. Bob Shows how to set up and use an overlocker

  Рет қаралды 33,317

WorldWalker23

WorldWalker23

Күн бұрын

Bob, the owner of Newcastle Sewing Centre showed us how to set up and use an overlocker. I filmed it so that we could recall his great tuition and I have shared it here so that others can have the benefit of his experience.

Пікірлер: 31
@gefelice
@gefelice Жыл бұрын
Thank you so much for this! I got my machine secondhand without a manual and I wouldn't have figured it out without this video
@lesleylanglands3875
@lesleylanglands3875 7 жыл бұрын
I bought a second hand machine and struggled for ages with it. This video makes it so clear and solved my problems straight away. Fantastic! Thank you so much.
@kaytily8623
@kaytily8623 7 жыл бұрын
I think we all need a Bob
@camilleimogen
@camilleimogen 4 жыл бұрын
Good demo. I keep coming back to this because I keep forgetting one of the steps each time I re-thread so, thank you all.
@WorldWalker23
@WorldWalker23 4 жыл бұрын
Your welcome. So do I. It has the correct tensions for my machine and when they get out of place I come back to this video... I also dont sew much so I do forget certain aspects of threading it. I am glad that others are getting use out of it x
@elleagbonson5281
@elleagbonson5281 6 жыл бұрын
I want to say thank you for sharing this video on youtube. It is alife saver indeed. I bought my overlocker machine since 1996. I only learnt how to thread it properly only last year.
@carlkrause7903
@carlkrause7903 8 жыл бұрын
THANK YOU I JUST BOUGHT A PRE OWNED TOYOTA 6600 3-4 THREAD ,THIS VIDIO WAS WONDERFUL AND AS REAL AS IT GETS MY BEST TO YOU
@janetcozens4623
@janetcozens4623 8 жыл бұрын
Thanks for sharing Bob never knew about holding the threads with thumb Cheers
@magdalena909
@magdalena909 11 жыл бұрын
great video
@Anuksonamun
@Anuksonamun 5 жыл бұрын
I have exactly the same overlocker as shown in the video. Tried as per all the instructions and demonstration and the overlocker is still not overlocking properly. Is there any chance of Bob coming to London to repair this "*%>+ machine?
@gemthomson6730
@gemthomson6730 9 жыл бұрын
Great demo, Have you any more demo on thread tension regarding the SL1/SL1T model.Every time i change material i spend ages doing tests on strips of cloths is there any tips?
@sharronparker5502
@sharronparker5502 3 жыл бұрын
Oh Bob ! Where are you ? My lovely mum just gave me her Toyota sl 3404D differential I’ve threaded it but the tension is wrong 🤦‍♀️I’ve tried setting the dials as in this video but it’s not right 🙁help please?
@gladysadeleye2448
@gladysadeleye2448 7 жыл бұрын
thanks
@nanihgnfgdjkj6069
@nanihgnfgdjkj6069 2 жыл бұрын
podría enseñarme en español? y enbrarla?... muchas gracias.
@beatrizsoto7195
@beatrizsoto7195 2 жыл бұрын
En español gracias
@mirellaaguilera3236
@mirellaaguilera3236 2 жыл бұрын
Estoy viendo al mecanico como arregla la oberlok pero nose entiende por no estar en español
@lisasharp4456
@lisasharp4456 3 жыл бұрын
I see you thread the machine from right to left 4321 but some ppl thread it right to left but do it 3421 does it make a different
@annwhite3019
@annwhite3019 7 жыл бұрын
i have got a Janome 9102d overlocker, and i have had terrible trouble threading the looper, i just dint know what i am doing wrong. I have watched the utube videos, but still no luck.Any tips thanks.
@AnaMaria-fm1rc
@AnaMaria-fm1rc 3 жыл бұрын
Ele explica em português
@ruthpryce7032
@ruthpryce7032 4 жыл бұрын
Bought a used Toyota SL3404D but have no manual. Can you help?
@gabrielenarburgh543
@gabrielenarburgh543 6 жыл бұрын
Can you tell me why my stitches are wider than my cutting width
@marieclaudevelle1320
@marieclaudevelle1320 3 жыл бұрын
j'ai le fil vert de la machine qui coud parallèlement au fil jaune puis il casse pourquoi?
@robertahunter9329
@robertahunter9329 7 жыл бұрын
how do i sharpen my blade on toyota SL3404D overlocker
@carolwhittingham4693
@carolwhittingham4693 5 жыл бұрын
Hi I've just seen the above on how to thread an overlocker. My Mam gave just gave me hers. It's a Toyota SL3477 Been sitting doing nothing for years in her spare room. Thought I'd have a go but it's got tangled and right needles just snapped. Can't see how to thread the last two stages. Can you help? Also I think it'll need a service and could do with a contact number if you have one.
@WorldWalker23
@WorldWalker23 5 жыл бұрын
Hello. I was filming. Its my x who was taught how to use it
@darlenefowler6225
@darlenefowler6225 6 жыл бұрын
i have a 3404 toyota differential serger looking for the manual. where do i get one. having troubles threading
@helendavis46
@helendavis46 3 жыл бұрын
Ah well done Bob! My serger has been put back into a cupboard so many times. My sticking point was not putting the thread through tension bars and waiting to get that ‘click’. I’ve been trying to sort this for years!
@iarose23
@iarose23 8 жыл бұрын
what model is your toyota
@tulipakiwi8722
@tulipakiwi8722 5 жыл бұрын
I think its SL3404 cause i hv one
@Maritotten
@Maritotten 4 жыл бұрын
@@tulipakiwi8722 hii, is that the same as Toyota 3404d?
@carolinapaloma1111
@carolinapaloma1111 Жыл бұрын
Cómo las pelotas la cámara
Toyota SRL 4D lockmachine handleiding in beeld - deel 2
10:28
Hobby Channel Craftminded
Рет қаралды 1,9 М.
Como ajustar la overlock familiar singer
13:46
Mecanica Confeccion
Рет қаралды 220 М.
Now it’s my turn ! 😂🥹 @danilisboom  #tiktok #elsarca
00:20
Elsa Arca
Рет қаралды 12 МЛН
How To Set The Tension On Any Overlocker
9:19
La Romi
Рет қаралды 139 М.
Toyota SRL 4D lockmachine handleiding in beeld - deel 1
11:22
Hobby Channel Craftminded
Рет қаралды 6 М.
Jak wykonać mereżkę na kilka sposobów
19:10
Domowa Krawcowa
Рет қаралды 14 М.
como coser con 2 , 3 y 4 hilos en la maquina overlock familiar
7:28
El mundo de la costura
Рет қаралды 23 М.
Easy hem sewn by overlocker
2:24
Iconic Patterns
Рет қаралды 358 М.
Toyota SLR 4 D.wmv
7:20
wwwmesinpl
Рет қаралды 89 М.
Toyota #Overlook# SLR_4D
10:02
Lamanina Nähen
Рет қаралды 14 М.
😮 How to adjust the OVERLOCK TENSION 🔥 Very Easy! ENG SUBS
7:49
Nocturno Design Blog
Рет қаралды 10 М.