Creality CR-10 V2 3D printer review - all you need to know

[@Creality3D]

Thank you for the honest review and we will continue to improve!

[@MrDonXX]

It's a shame the CR10S Pro does not work as well or as advertised

[@MacFly669]

It's also a shame that open source firmware are not shared by Creality, that's why I will do not buy a second one....

[@whc2001]

​@@MacFly669 I think they uploaded source codes on their website? Or for some models?

[@MacFly669]

@@whc2001 The only one you get with source files is 1.60.3 with an old deprecated version of Marlin, with no thermal protection and so on... others are binaries that you could not customize

[@amrfwws]

Yes please improve everything up before I buy one's, heheh.

[@surfnblues729]

Thanks for vids I was thinking of getting into 3d printing and after watching several people’s vids I’m making you my go to guy when it comes to reviews.

[@LWK222]

I just ordered this particular printer last night. Your review has eased any trepidation. Lol thanks friend.

[@MohammedNoureldin]

The best review I have seen about this printer! Thank you a lot!

[@YoursTrulyThe1Pony]

Just bought my cr 10 v2 for only $362 can't wait for it to come in the mail

[@NexiTech]

Awesome!

[@bainkrieg3204]

Absolutely great review! You're the one I go to for 3D printer reviews.

[@NexiTech]

Bain Krieg Thank you very much!

[@Nicole13Adams]

This video is very thorough and informative. I don't feel overwhelmed and I appreciate that. Thank you!

[@beratbaki1681]

This is the best channel for getting information for the printer I am looking for. Thanks Nexi

[@NexiTech]

I'm so glad to hear that. Thank you so much for your comment mate!

[@G8Neu]

Hello, I have buy the CR-10 V2 with BL-Touch. It works well. But if the printer runs in filament out situation the heatbed and the nossle heating stops. After some seconds the model pops up from heatbed. And in the menue is no point to chnage filament. I have installed the newes version of CR-10 v2 firmeware. But if you change the filament during Print prozess all works well. So at this point the filament sensor and the Resume print option after powerfail is useless with the new Glas-heatbed. The other hand the new Glassheet works just perfekt.

[@StevenDoye]

Great video. Just an fyi, your video just sold a CR-10 V3. I just placed my order now. This looks like a nice upgrade from my MP Maker Select Plus.

[@msb46688]

Thank you Nexi. Awesome Review! I am having difficulty deciding which CR series Printer should I go with? Assuming newer model CR10 V2 would be more capable compared to all others which are out there already (considering electronic chip inside those, etc.)! Can you please do some comparison video with others Vs CR-10 V2 so that we know what to expect if we were to buy one of these? I think Amazon has reviews mixed up with Original CR-10 (sucks to rely on reviews by others since many Reviews are messed up and mixed up with other products). And not a lot of information available online as it is comparatively newer model. Can you do a detailed video on various settings, and print quality with this new model as well? Any more information on these would be great as I am and so do many others are out there shopping for a decent 3D printer. Thank you for your work! It helps a lot of newbies out there.

[@NexiTech]

Thank you my friend! Well to make this video it took me more then 3 weeks of work and it seems that new KZbin algorithm don't fell like promoting this video at all which is unfortunate, so I will just answer to you here for now. Ok i understand what you meant, there is so many 3D printers in CR Series and in general to chose now and I understand that people can get confused. I have tested pretty much all 3D printers from Creality and let me tell you that this new CR-10 V2 is the most complete and the first 3D printer from Creality that works flawlessly out from the box without need to change/upgrade anything on it and the print quality is awesome. On every 3D printer from Creality so far and in general I need to fix/change/upgrade something to get it right and to make 3D printer to work as it should be out from the box. For example, On CR10 Max I needed to modify heat-bed(crucial fix), on Cr10S PRO I needed to change capacitive to inductive Auto level sensor(crucial fix) on Ender 5 and Ender 3 I needed to add TL-smothers to get rid of salmon skin on prints surface(crucial upgrade + motherboard fan fix on ender 3), on the Cr10S I needed to add AC 720W silicone heated and solid state relay to be able to print ABS as stock heated bed was unable to reach 100-110C even with heat-bed insulation installed and etc... and BTW Creality is the most successful Chinese 3D printer manufacturer on the market today and still I found some flows there and there on their new 3D printers which I always say and point out in my review videos and Creality fix them later on the new units after my feedback which is great for new owners and for the 3D printing community. From all 3D printers that Creality has produced so far, I will say that CR-10 V2 is the best and most complete 3D printer with the highest print quality out from the box. The only thing that I would change/upgrade on the new CR-10 V2 is to replace stock bowden tube with high temperature resistant Capricorn bowden tube, but only if you are planing to print Nylon or similar filament that require nozzle temperatures higher then 240C degrades. If you print PLA, PETG, ABS, WOOD, TPU etc, filaments up to 240C then the stock/generic bowden tube will be good enough. Also if you are really picky about the fan noise or you like to print and sit on the same desk table very close to the printer then I would also suggest to replace the stock cooling fans inside of control box/ power supply to new silent Noctua fans that would make it pretty much completely silent but that's just me :) P.S. If you ever want to change the stock cooling fans on the Cr10v2 check the CR10S PRO upgrade video series that I made(browse the channel) as it's similar procedure. I hope that I helped with your choice. Best Regards Nexi

[@msb46688]

@@NexiTech omg. Thank you so much for your genuine feedback. That's extremely helpful. Your the only Chanel that actually have useful content and non biased reviews. Excellent work Nexi. 1) not planning to use any fancy material other than general stuff so, no upgrade at this point. But good to know. I am going to screenshot your comment as it's very valuable to me. And of course to others. 2) not picky about fan noise. I already saw your video upgrading to 5krpm fan. Great stuff. Possibly will get it done later. One more Question: 3) Australia folks got this CR10 S PRO V2 in hand.... What's up with that? Did you review already? Or received that model? I would like to find out how that compares with CR10 V2? Any feedback on that? It's not currently available in us. But third party website ships it. Again. Can't thank enough for your valuable feedback.

[@Private_Snowball]

Nexi Tech would you recommend this over sidewinder x1? Seems like it’s cr10v2 or swx1 for me.

[@Skott62]

Thanks for posting this video and sharing your opinion. I'm on the hunt for my first printer so doing the research and all that. I found this review informative and very helpful. Thank you very much!

[@iGameOvertv]

Amazing review, as always! Thank you.

[@anthonyjaisingh]

Do you have a video for your DIY camera slider? Looks really nice.

[@ripper9111]

Also, could you please provide a link to the test model you printed shown at 11:41 of the video. Thank you.

[@NexiTech]

Sure here it is: FDM Benchmark test - github.com/kickstarter/kickstarter-autodesk-3d/tree/master/FDM-protocol

[@ripper9111]

@@NexiTech Thank you very much.

[@robertbuckner2353]

Terrific review, much appreciated.

[@NexiTech]

Thanks for watching and for your comment.

[@ripper9111]

Excellent review! Very thorough especially compared to some others I have seen on other channels. Very well done. Was very helpful. Thank you!

[@NexiTech]

Thank you so much for your comment and positive feedback. Wish you all the best.

[@rf253]

Had a ender 3 Pro which failed in the board due to poor quality soldered joints. Watched your extremely well presented review so got the CR-10 v2. Couldn't see any link for the Endless Cube you printed. Have searched just about everywhere for it but were all square profile not diamond profile which does indeed look very good

[@NexiTech]

Hi mate! Thank you for your comment. Here is the link of the cube print: www.thingiverse.com/thing:3496723 Have a great day!

[@rf253]

@@NexiTech thank you - no wonder I couldn't find it, was looking for endless not infinity Cube. Printed it and came out far better than expected. CR-10 v2 print quality is great as I am building a 737 cockpit and now able to do larger parts and so far are printing brilliantly.

[@NexiTech]

No problem mate! That's awesome! I'm glad that you satisfied with your CR10 V2. Share some link when you finish your project I will approve it. Thanks again for your comment I appreciate it. Cheers!

[@Simonkenteriksson]

You are the best reviewer ever. Love your videos!

[@NexiTech]

Simon Eriksson Thank you so much!

[@Gridlivin]

Nexi I’m having a really mysterious issue with my cr10 v2. Support channels have been unsuccessful as well as my own attempts to solve. How can I enlist your help?

[@XinuyashaX1]

Thanks for the review my friend I can’t wait to order this.

[@nathanharshbarger9222]

Great Review! Information that matters. Not just techno music lol. Thank you. I will be buying one in a few weeks..

[@jejemas]

Wow. Very good! You convinced me to upgrade from my ender 3 to this cr-10 v2. Which slicer did you use? Would you mind sharing your profiles for the different types of material? Thanks again for this review!

[@dunna321]

great video. very good descriptions and use of different filaments and prints. i think i might buy this printer soon

[@As-eq4qe]

شكرا شرح جميل ولكن لدي سوال ما هو البرنامج الخاص بالتصميم للاشكال المختلفة والاحفض باي استطالة وشكرا مرة اخرى

[@Senbonzakura776]

Great vid. I was considering buying another printer since I have the regular CR10. This makes my decision way easier. Thanks

[@neilostler8415]

Hi. Can you tell me please if if the CR10S heated plate fits the CR10 V2? Thanks

[@jonhuss6783]

Hello, I have a Creality CR-10S Printer that I can't get to print. The z Axis goes up and down when homing but won't When Printing. It just stays on the first layer. Is this a printer problem or am i doing something wrong in Cura ?

[@MacFly669]

Excellent video as usual with Nexi Tech ! Thanks Nex ;)

[@NexiTech]

Mac Fly You welcome my dear friend! Thanks for your comment :)

[@zackmoore1351]

when i am in the slicer it says Firmware cannot be updated because there is no connection with the printer. i hear the beep indicating that windows 10 reads the connection, but nothing shows up

[@lyddiacheah3152]

The retraction distance you mentioned is for the Cura software? What is the retraction speed for this model in Cura?

[@zombiestuta]

Hello, couple of questions. Recently I bought the same printer, but still can't print a complete object. Having problems with Y axis, when calibrate the band move out of the rail and have to fix it. And when already print, after 2 or 3 layers everything moves out and screws the work, besides sometimes the material is not coming out of the extruder, any advices or experience to share? Thanks.

[@HarisAliOnline]

I bought the printer a couple of weeks ago....overall performance is great but having slight issue with minor layer shifting which are most directed towards the front of the printer. I am assuming an issue with Y-Axis maybe tightening of the wheels underneath the build-plate might resolve the issue.

[@ukr4ever]

Thank you for the excellent in-depth review. I was hoping you could make a video on what upgrades you think it might need. Thank you.

[@_jovian]

would you recommend the V2 over the PRO?

[@adambrowning9629]

Hi, Great review 👍 I'm considering either a CR10 V2 or a CR10 S Pro V2, which one would you recommend? I heard a few harsh reviews on the S Pro

[@HakanOnurDerici]

Those 2 are exactly what I'm considering to buy. I can't make my final decision and pull the trigger. Pro v2 tempts me with compact design and ordinary v2 has the new special coated glass bed.

[@dylancronin7710]

Oh my god I am in the same boat. I have decided though, and its going to be the CR-10 v2. Its much more reliable, and auto bed leveling works much better. The fancy features on the pro doesn't justify its bad reliability and problems. Thats just my idea after a week of research :).

[@valent_t]

I'll go with V2 because it has all metal hotend while Pro V2 doesn't

[@HakanOnurDerici]

@@valent_t I believe Pro V2 also has all metal hotend. I have pulled the trigger for V2 too as pro v2 was not available here in Turkey. Today I've seen an official creality video about Titan direct extruder upgrade for V2 and sadly it doesn't fit perfectly and they're trying to find a fix to this problem. It sucks to know one of the key features are not designed well and probably we cannot use titan direct drive on these machines. If you haven't made your final decision yet I suggest giving a look at Sidewinder X1 v4 as well.

[@hakangenc9175]

@Hakan Onur Derici Hakan bey V2 tecrubeniz nasil gidiyor? Öneriyor musunuz?

[@scottjgillishere]

Which would you recommend for a beginner ( first printer) The cr10 v2 ( this one your reviewing) Or the cr10 s pro v2??

[@sherrimaltby3598]

The SV01 looks similar to cr v2, will you test it??

[@0XAN]

hi and thanks for your nice reviews; can the cr10 v2 print the gum? for a generic use, it's better the cr10 S or the cr10 v2?

[@bryceturnbow9441]

I notice when you tighten the eccentric bearing nuts, they're on the same side. If I got one shipped to me but has 2 eccentric bearing nuts on one side and one on the other side, how can I get them to all have the same tightness? Was it built wrong?

[@terrysimkins1526]

Thanks for the review. Helped me alot

[@jeffreyhernandez3457]

So I’m using Cura Slicer. They haven’t implemented the CR-10 V2 yet. Should I just use the original CR-10 profile?

[@GeoDelGonzo]

Thanks for that heat bed tip with the wheels.

[@NexiTech]

No problem man, I'm glad that you found my video useful. Take care

[@zigomatic]

Thank you for the review. I appreciated details given. About the nozzle, it's a MK8 or MK6 ? Thank you

[@bals9588]

Wong

[@perfodemo]

Hi Nexi Tech - What are the basic menu steps for a successful BLTouch installation? Do we ever need to repeat this procedure after a certain time or usage? I thought your input would be better for other viewers. Thanks again for your hands-on experience and all best practices.

[@NexiTech]

Hi friend! Nope, once you install Autolevel sensor and set it up you do don't need to do it again. Basically Autolevel sensor will take new measurements automatically right before each print and you will have perfect first layer every time. Here are 5 steps, how to install the BL- touch on the CR10 V2: 1. Install the BL-touch - drive.google.com/open?id=1zCIQgfzIJUoN8wIjjxb4DI5j8pBJlwRp 2. Download BL- touch firmware - drive.google.com/drive/folders/1N_RVXtakOYS0uQJso0YY8yp2j1aFmoik 3. Connect Cr10 V2 to the CURA via USB cable and install new firmware. 4. Adjust BL- touch Z distance and run auto-level from the printer. drive.google.com/drive/folders/1N_RVXtakOYS0uQJso0YY8yp2j1aFmoik 5. Disconnect and remove mechanical Z stop switch from the printer. Done I hope I helped :)

[@perfodemo]

Nexi Tech - Thanks, these are perfect instructions! Certainly helps for future reference.

[@technnc]

For some reason my resume print does not work. It starts to by moving to the correct axis, but then stops moving

[@TheRealSkeetman]

Are you able to print with nylon with this being stock or do you have to upgrade the hot end?

[@logmathe]

which slicer do you use? i get very different results depending on which slicer i use, and none of the print is without issue? the issues are of course not the same..

[@enescamur5883]

How did you make the cura settings?

[@Hustlerswealthquarter]

do you recommend this over the anycubic mega x?

[@theantattor6003]

I 've a doubt that if I want to print Flex Tpu PLA. Is it necessary to change bowden extruder to titan direct drive(spare modular one )

[@NexiTech]

I have printed with TPU filament for years on bowden 3D printers. Just lower your print speed and you will be fine as look you are printing with low speeds. If you looking to print TPU faster then you could add Titan direct drive extruder, or if you want to print TPU much faster maybe you can modify the X carriage and add E3D Hemera extruder.

[@Birdman_Animation_Studio]

excellent review, I'm sold!

[@NexiTech]

I'm glad you like it. Have a great day!

[@victorclarke4128]

Did you use factor firmware

[@TheUpwardSpiral]

Do you have a link for the FDM test you printer? That's perfect for what I need

[@NexiTech]

Sure! Here it is: FDM Benchmark test - github.com/kickstarter/kickstarter-autodesk-3d/tree/master/FDM-protocol

[@TheUpwardSpiral]

@@NexiTech thank you!

[@caroltan8257]

My friend recommended me the Creality Ender 5 plus pro for lifesize head print but not available at our local shop whom I trusted. I think this printer can also do the job but CR-10 V3 is what is available at the moment. Is this fine? What's the difference? Thanks! 😊

[@SolanaChris]

Yo please please please link the url for that vase.

[@kirillrebkovets4958]

Best video out there thank you so much for your time!

[@whitebelt2905]

Keep up the great work! What printer do you recommend that is under $600?

[@samspeaks2016]

Just ordered this myself and seems not one this has gone right with this yet :( My prints are not centered. I don't think this is an issue with my slicer because the default gcode files print the same way. When it's trying to print it will jutter/skip on the x/y axis. Also, I cannot level my printer with the paper method because my adjusting screws below the heated bed are actually screwing off all together.. Anyone else had any of these problems or know a fix?

[@kylelambert7360]

Thank you for the great video. I have had my CR-10 v2 for several months now and printing very good with PLA. I just received my first roll of PTEG (the Overture brand in your link- silver color) and cannot get any acceptable results. I used your settings of 220C hot end, 70C build plate, 0.2 layer height, 50 mm/s speed, 4.4mm retraction distance and still could not get anything to print without failing. I have the BL touch so bed leveling is no issue. Were the test samples in your video the Overture filament brand or something different?

[@slevinshafel9395]

i like the naration and the video quality. Would be nice have a tutorial for beginer like me what i have to do when i got it. After mount it what next? Download 3D parts from 3rd website or use any 3D digital modeling. When got it use any slicer and ther explain about nozzel, layers, fill... etc.

[@Kyuaire]

Hi did you apply anything on the glass plate with PETG? I am very confuse because I am gonna try to print with PETG and dont want to risk to damage the glass plate (I have creality cr-10 v2 printer) thanks for the video by the way, this is what made me took the decision to purchase this printer.

[@Purk871]

Hi can you do a tutorial on how to Update the firmware on this machine to make it more safe?

[@partscience]

Which one I buy??? I need smooth and clean prints and size is also requirement... but may be somewhat enough and may be adjusted... so which is better among this and Original Prusa i3 MK3S??

[@scottjgillishere]

Which is the latest release? Cr10 v2 or the cr10s pro v2? Have you reviewed the cr10s pro v2?

[@Justin-yc3eb]

Just got this printer. I’m excited to see mods for this printer, specifically fan mods.

[@NexiTech]

Nice, Well the power-supply inside control box could really use one Noctua fan, maybe even others fans inside control box you could change to Noctua as well if you really want to make it silent. Check this video that I made for CR10S PRO it might help as it's similar procedure. kzbin.info/www/bejne/opXIXoaJjpmpqtk

[@murattosundan]

Can you share what profile or printer did you use for Cura? Should we use CR10 as base and rename to CR10 V2 and go from there?

[@NexiTech]

Yes you can use CR10 or CR10S print profile.

[@aaronthahustla]

Help - My Ender 3 Pro is getting the MAXTEMP ERROR whenever I start heating either the hotend or the bed.Whenever I turn on my printer the nozzel reads at 298 and the bed at 147. I Tried replacing the thermisters on both the hotend and the bed. I replaced the hotend. I also reflashed the firmware. The motherboard I'm using is the stock Creality V1.1.4. I also have the BL Touch attachment. What else could be giving me this error and what other options do I have other than replacing the motherboard?

[@chenbrian2073]

Awesome Review! Is it convenient to briefly introduce your shooting equipment and shooting environment? Thank you for letting me know.

[@ansys_cfd]

Thank you very much! awesome

[@MohammedNoureldin]

Would it make any difference if I upgraded this motherboard to a 32-bit motherboard?

[@NexiTech]

Not really, the print quality is already on spot. No need for that, layers are straight, nice and smooth. For that money better to get some more filament :)

[@DJPositron]

Hi Nexi, what nozzle size did you use on the V2 with the 0.15 layer height?

[@NexiTech]

Rowan Wilding I did not change the nozzle on CR10 v2 it's the standard 0.4mm. On the 0.4mm nozzle you can use typical 0.1 up to 0.3mm layer height.

[@DJPositron]

@@NexiTech Thanks for clearing that up.

[@NexiTech]

@@DJPositron No problem :)

[@Nicholas-rm2gp]

Awesome review, thank you for taking the time to review this printer! I'm looking at this printer (CR-10 v2) and the Ender 5 Plus which seems to get great prints (in reviews), which would you recommend out of the two and current specs? I'm leaning towards the CR-10v2 because of the updated mainboard and mean well PSU, I just wonder if the Ender 5 Plus frame is a better design for print quality. What do you think? I realise you havent reviewed any Ender printers, but thought I'd ask. :-)

[@Pvt.Joker64]

how about the CR-10S V2 ?

[@techlabs9385]

And one more thing... They say on their site it needs that Titan Drive for printing PETG/TPU/ABS... on this video you printed them with the standard drive? I'm about to order this printer and I can't find that Titan Drive or someone that actually uses that in practice... Any tips on this would be very appreciated!

[@NexiTech]

You don't need Titan drive to print PETG/TPU/ABS, standard drive works great. Titan drive is more for flexible filaments such as TPU.

[@SuperPks1]

would u recommend this for a first printer without much experience?

[@NexiTech]

Yes. This 3D printer is very beginner friendly.

[@scottjgillishere]

Have you looked at the cr 10s 5 ??? Wondering your opinion

[@NexiTech]

Too big and hard to level because heated bed is 99% bowl in center. I can't recommend Cr10 S5.

[@MaxPlass]

Would you recommend this over the cr10s? I am thinking of getting the 10s but am open to other options

[@NexiTech]

Max Yes definitely.

[@ibrahimyildizlife]

Hello Nexi Tech, I want to by a 3d printer that would worth it’s value. Instead of just getting an Ender 3, I would like to increase the cost in order to have a greater quality and build space. I am thinking between three models, Creality CR-10 V2, Anycubic predator and Anycubic Chiron. What matters the most for me is the quality, ease of use, and as less noise possible. I am quite new to 3d printer community. I don’t know the tricks and I have so much to learn. Thanks to your videos, I can sustain my neads. Please help me decide

[@DennisMurphey]

You provide a very useful review Nexi i appreciate your work, I have the CR 10S Pro and i sure like the wide bed rails and metal extruder, But i want those z Axis support Struts for my Pro very much, any ideas how to attachment to that sheet metal base? I thought the V2 was dual extruder. Can the Pro get a second extruder?

[@LCSRacing]

Amazing review, well done!

[@NexiTech]

Lucky C Thank you so much for your comment.

[@perfodemo]

Hi Nexi Tech - After watching your video, I just purchased one along with the original BLTouch kit. Everything working perfect and the print quality is outstanding. One quick question: Am I supposed to keep the Z switch mounted and plugged in, or can this be removed? Thanks for your great help!

[@NexiTech]

perfodemo Thanks for the trust and for updated info. I'm glad that you are satisfied with your CR10 V2. If you have BL-touch upgrade and BL-touch firmware you do not need Z axis stop switch at all. You can disconnect it and remove from machine.

[@perfodemo]

Hi Nexi Tech - Thanks for your quick reply. I have removed the Z switch and it is printing just incredible, the same exact results as your original video demonstration. I am so glad with my purchase of CR-10 V2. Thanks again for your outstanding product review. This is an epic 3D printer! I highly recommend it to everyone!

[@ovaderobuild7559]

Where did you get the Spider-Man print file?

[@NexiTech]

Here it is my friend: www.myminifactory.com/object/3d-print-spider-man-bust-76334

[@RonnieLaugen]

That all in one test looked nice - got a link for it?

[@NexiTech]

Sure here it is: github.com/kickstarter/kickstarter-autodesk-3d/tree/master/FDM-protocol

[@AndrewAHayes]

The bridging on the front window of the Benchy has some sagging which is quite surprising for such a short bridging run

[@Private_Snowball]

Andrew Hayes lol no. Every benchy has that slight dip. If you want please link a youtube benchy video that has zero sag. I’ll wait....

[@YoursTrulyThe1Pony]

Update mine should be delivered soon gotta re-watch this video again

[@C-M-E]

So if you had to choose between the CR-10 V2 or the TronXY X5SA... ?

[@NexiTech]

CR- 10 V2 wins!

[@C-M-E]

@@NexiTech Thanks for the input. Ended up with an Anycubic Predator. =D I was going for the Chiron but with the Corona Virus knocking out production, apparently printer machine supplies are drying up and it was available. Got it for a good deal though with room for upgrades!

[@RexQwert]

Could you put a e3d v6 on it?

[@mixedflix9147]

Hello, just ordered Ender 3X 3D Printer. What filament is preferred and where can I order, your site was out of the filament at the present time. Thx!

[@photonspark]

Thanks for the review! What are the pros and cons when comparing CR10S Pro and CR-10 V2? Why were 2 similar models released this year?

[@murattosundan]

cr-10s pro also have v2 at the moment.

[@HakanOnurDerici]

@@murattosundan And I'm confused if I should go with the new V2 or Pro V2

[@techlabs9385]

Hi! Do you know where can I get the Titan Drive advertised for TPU for CR-10 V2?

[@NexiTech]

Yes, you can get it here - Titan extruder for CR10 V2 - bit.ly/2woMEYk

[@memogles5763]

What did you do to print petg to 220 degrees?

[@NexiTech]

Memo Gles AprintaPRO PETG prints just fine with 220C, only problem is that they seems to stop to produce any filament sense end of 2019 which makes me very sad. I'm not sure if they went bankrupted or what happened, Aprinta pro was producting outstanding filament for 3D printers for years.

[@memogles5763]

Nexi Tech thanks for your reply, I was gonna buy aprintaPRO but it isn’t available anywhere, it’s a shame if they went bankrupt. I bought the CR-10 V2 specifically to print petg, so do you have another filament brand recommendation ? Some of them print up to 250C which is quite toxic for pets and humans, also the Bowden tube would have to be replaced sooner.

[@aliemresozkesen6994]

can nozzle be changed to 0.25 or 0.6?

[@NexiTech]

Yes it can.

[@antennasbc]

Nice review very thorough. Settings for TPU please...

[@NexiTech]

Thank you! Setting for TPU? Just lower your print speed(lower the better) and use higher layer height like 0.2 or 0.25mm.

[@SteinerSE]

Between this and a 10s if the price is very close, which would you chose?

[@NexiTech]

Thomas Andersson CR10 V2 is better 3D printer then CR10S in every segment.

[@Moqqot]

so would you get this or the cr-10s pro v2?

[@NexiTech]

Tickles It depend where you want to place this 3D printer and how you want to use it. Cr10S PR0 v2 takes less space and it's looking nicer so it's more home/apartment friendly while CR10 V2 is more bulk in size with that control box so it takes more space. People who prints alot of ABS they perfer CR10 V2 because they can place the printer in enclosure while control box is outside. Both printers have pretty much identical print quality and print size so it's just your preference.

[@Moqqot]

@@NexiTech Ok, ill be printing some stormtrooper parts for cosplay, create minifigs for boardgames and parts for collectible action figures so i can modify them myself. So i guess ill be an "allrounder" both printing large and small and different fillaments. Im also quite new at 3d printing but i dont want to buy and "feel" my way to the right one. Alot of ppl rekommend this so i thought ill start with this one or the 10s pro one. Are there differences in printed object's details?

[@duncanduncan3064]

Nice review. I hesitate to buy it. I have many qustions. can you tell me if it's marlin 1.1.9 or 2.0 and what is the motherboard? can you give the links of the objects that you printed? Can we add a bltouch?

[@NexiTech]

Thanks man! 1. It's older marlin 1.1.9 version, 2. 6:23 Version 2.5.2 2. Yes, i will add links of the models as soon as i can if that is important to you. 3. Yes, 1:53 Can you please ''actually'' watch the video before you ask these questions.

[@duncanduncan3064]

@@NexiTech thanks for your answer. i ask because it's not easy for me

[@sr-de5nz]

Hope that the new CR10 is a direct drive one...

[@andrewbeaton3302]

Incredible prints!

[@NexiTech]

Thank you!

[@AlwaysAstral]

Would you be willing to share that spiderman and deadpool model?

[@NexiTech]

www.myminifactory.com/object/3d-print-spider-man-bust-76334 www.myminifactory.com/prints/3d-print-deadpool-bust-remastered-supportless-edition-14005