Getting a chest rig for extra mags, was the biggest possible upgrade I could've made to my larp/training abilities at the range. The $ spent on it was absolutely worth the investment! Get yours today bois, before the next lootdrop arrives!
@Dnd-wz9yn Жыл бұрын
So I ‘ve been asking folks can you turn the Pincer placard into a chest rig? I have yet to get a reply. So Eric, do you run this a s a CR?
@ericbergfield6451 Жыл бұрын
@@Dnd-wz9yn I'm using Haley Strategic's "D3CR X" chest rig. I have no experience with the Pincer Placard.
@_Andy7l05 ай бұрын
@@Dnd-wz9ynI’m looking at getting an HRT H harness and removing the top buckles. Doing this would allow you to use the G buckles to loop into the loop that holds the harness buckles. (I know it’s a year late, but I think we’re the only two who have thought of using a Pincer placard set up as a chest rig)
@joshjosh7029 Жыл бұрын
I have 2nd layer admin pouch almost set up the same, the small inner i put band aids with alcohol wipes, the two pouches i put batteries for my lights and such, the pouch next two i have a small range of hex tools, the main opening pouch area i have a rite in the rain with pen, on the rear where the two loops i have a paint can opener and a sharpie. I mostly do flat range stuff. I got mine the mail Saturday and took it for a spin so far i like it!
@ThinLineDefenseCo Жыл бұрын
Awesome! I'd love to see a pic if you'd be okay with that. Want to post it in our discord (link in description)? Or email - Jason
@joshjosh7029 Жыл бұрын
@@ThinLineDefenseCo ill email it
@Croak1 Жыл бұрын
Just like the single Pincer AR mag pouches, I cut off the MOLLE loops on the Pincer Pistol pouches and ran 1" OneWrap to mount them on my belt. Leaving the Admin pouch slick for now.
@ThinLineDefenseCo Жыл бұрын
If you want to get rid of it, let me know! - Jason
@richardharris5819 Жыл бұрын
I've always loved Agilite products. See ya Thursday
@ThinLineDefenseCo Жыл бұрын
Looking forward to it! See you then - Jason
@d1909a Жыл бұрын
❤it been waiting on one
@ThinLineDefenseCo Жыл бұрын
Well, you may be able to win one on our May 18th Livechat. 6:30 PM Pacific - Jason
@d1909a Жыл бұрын
@@ThinLineDefenseCo I'm definitely will be watching thanks bro and good luck 2 me😁
@ilyasvetlov7670 Жыл бұрын
Just wanted to point out mistake, at 7:12 you say the skinny straps go inside the ar15 mouth, but they go inside the the small tabs just under the mags mouth and attach to the velcro on the admin pouch.
@ThinLineDefenseCo Жыл бұрын
Thanks - Jason
@Galildoughty Жыл бұрын
I love Agilite. Easily the most comfortable plate carriers on the market.
@ThinLineDefenseCo Жыл бұрын
Agree...I want to get another K19 for work. - Jason
@Ipo_Ooped_Maself Жыл бұрын
I find the shellback banshee 3.0 more comfortable however with the extra padding comes weight and bulk. Everything is always a trade off there is no perfect gear unfortunately
@zacharyfett2491 Жыл бұрын
Looks like a great admin pouch. Definitely going to pick one up!
@ThinLineDefenseCo Жыл бұрын
Hope you love it - Jason
@JosephPatrickUtanes Жыл бұрын
Love the concept of the second layer, and the top will be clear when indexing your mag. The build is going outwards the body so it could be a challenge to be in the prone position. Liked to have it in 7.62 calibre.
@ThinLineDefenseCo Жыл бұрын
Like the idea of a 7.62 mag pouch. That would be cool - Jason
@witchdoc5075 Жыл бұрын
I'm testing team 9. I have the LE div patch. How did you get the Six Pack pouch patch? Thanks for the video. Pincer admin with esstac mag pouches on the side is doing me well. Thanks for the video.
@robertdole5391 Жыл бұрын
Nice, I like that it is pretty low profile.
@ThinLineDefenseCo Жыл бұрын
With the dangler as an IFAK, having an admin pouch is normally where I'd keep a boo boo kit for operations. This fits the bill nicely. - Jason
@randygarza1415 Жыл бұрын
Agilite products definitely at another level
@GradeATactical Жыл бұрын
looks pretty solid!
@rhino673 ай бұрын
I'm officially starting the "Pincer placard" drinking game
@Micsmit_45 Жыл бұрын
Been eyeing this ever since they announced it. Got two questions you might be able to answer. 1.: how well would this do to keep a phone in for use with ATAK? 2.: how well do the pistol pouches retain single stack mags?
@ThinLineDefenseCo Жыл бұрын
Great comment. 1. This could probably hold a phone okay. I have a Google Pixel 4XL and it has plenty of room in there. Taking it out and opening may be a problem compared to a juggernaut case and PC mount. 2. Not good. I tried a Springfield XDs 9mm and a 1911 mag. Did not hold them well at all. Hope this helps - Jason
@Micsmit_45 Жыл бұрын
@@ThinLineDefenseCo so a dedicated phone pouch would probably be a better choice, ey?
@ThinLineDefenseCo Жыл бұрын
Depends what your mission is. I like the Juggernaut case and chest mount. If you are running ATAK, it's as simple as a flip down and check the screen. If in the pouch, you're unzipping the pouch, digging the phone out, opening ATAK, etc. Me personally, go with dedicated phone mount. BUT, I think the admin pouch COULD be used for what you want. - Jason
@sethblanton911 Жыл бұрын
I can't wait for blk camo
@ThinLineDefenseCo Жыл бұрын
I am heavily invested in Agilite and Defense Mechanisms...but some MCB from someone else would be nice! - Jason
@erichill5328 Жыл бұрын
Howdy, What rifle is that in your intro that has the AR style hand-guard with the bolt action rifle but stock? Many thanks
@ThinLineDefenseCo Жыл бұрын
I forgot the specific model, but brand is Tikka - Jason
@ThinLineDefenseCo Жыл бұрын
Tikka tac a1... Amazing rifle -Walsh
@erichill5328 Жыл бұрын
@@ThinLineDefenseCo awesome thank you very much. It looks really handy.
@erichill5328 Жыл бұрын
@@ThinLineDefenseCo So the Tac A1 is a bolt action rifle yours is a semi auto in your video. What caliber are you running? I can’t locate your rifle anywhere. I didn’t know that Tikka made a semi auto loader. Thanks 👍🏻👍🏻👍🏻
@erichill5328 Жыл бұрын
Ah looks like a 22LR.
@AustinCameron9 ай бұрын
Have you had any luck with the Agilite Zero combined with a chest holster?
@ThinLineDefenseCo9 ай бұрын
I haven't tried a chest holster on the Agilite K-Zero. Any brands you'd recommend?
@AustinCameron9 ай бұрын
@@ThinLineDefenseCo I'm hoping to get by with just the K-Zero and their EDC Organizer Panel to hold the holster, since my environment is mostly just Florida wild life unless I find a more legitimate placard.
@Ironsight_Army Жыл бұрын
Must be pleasant to win!
@ThinLineDefenseCo Жыл бұрын
That too...lol - Jason
@JSmiley39 Жыл бұрын
Hey quick question will it take the 45 ACP mags I saw on the website it said 9 mm only but did you try a 45 ACP to see will it fit??
@ThinLineDefenseCo Жыл бұрын
Thanks, it DID fit a Glock 21 ETS mag and OEM mag. Picture in our Discord - Jason
@JSmiley39 Жыл бұрын
I was about to order it until I saw that I have everything else I’m trying to see if it will fit my FNX 45 mags
@ThinLineDefenseCo Жыл бұрын
They're sold out now I believe - Jason
@crackaopen3684 Жыл бұрын
any recommend organizer for velcro section of sixpack or admin pouch?
@ThinLineDefenseCo Жыл бұрын
I've used the 3X5 Velcro organizer from Maxpedition - Jason
@Spinach_Dip933 ай бұрын
I know this is an older video. But I just bout this for my jpc 2.0 will this be compatible without the g hooks?
@ThinLineDefenseCo2 ай бұрын
Would you be using the QASM buckles? They should be swappable. - Jason
@ramenisbombman Жыл бұрын
How are your lancer mags not hanging up? Mines gotta be made bad
@ThinLineDefenseCo Жыл бұрын
No idea. I've only ever had issues with Gen3 PMAGS - Jason
@Tiagopa23 Жыл бұрын
Do you think it's possible to fit a Glock 43x MOS with streamlight tlr-7 sub inside the adm pouch (with kydex holster)?
@ThinLineDefenseCo Жыл бұрын
Probably not. However, you may be able to fit it in the Agilite six pack hanger pouch. We have a video on that one as well. I have a Glock 26 with a RMRcc in a Velcro holster inside the six pack. - Jason
@Tiagopa23 Жыл бұрын
@@ThinLineDefenseCo Tks
@Fischer56 Жыл бұрын
does it work on other placards?
@ThinLineDefenseCo Жыл бұрын
Probably not - Jason
@Fischer56 Жыл бұрын
ok thanks jason!@@ThinLineDefenseCo
@michaelwhite9199 Жыл бұрын
I really don’t see a need for an admin pouch on a non-military plate carrier. Given the realities of CCW or police work I also don’t see the need for more than one extra rifle magazine. Non-military personnel can’t use covering fire so 56 rounds of 5.56 is a lot. But… why the hell not carry what makes you happy. I’m not standing in the way of people getting their freak on.
@ThinLineDefenseCo Жыл бұрын
Very fair point. The NEED for this is very subjective. For me, having a place to keep a admin items is essential. But like we always say, Mission Dictates Gear. Do what you need. - Jason