Build These Super Strong Sawhorses

ATTN: Viewers in Canada now have access to tools used in this video through Amazon.ca to get the low online prices you expect WITHOUT extra import duties, etc! Go to: www.amazon.ca/shop/nextlevelc... to find tools and supplies seen used in this video if you can't find them locally. Purchases made through these links are the same low online prices you expect but Amazon.ca pays small ad fees to Next Level Carpentry which I really appreciate... thank you!!
Build these incredibly strong Apprentice Style sawhorses using pro tips from Master Carpenter Matt Jackson of Next Level Carpentry. Learn small but very important differences that make THESE I-Beam type sawhorses the strongest sawhorses you've ever seen with proven strength stats. Watch unbelievable results of a real-world stress test performed at the end of the video that show these ponies actually hold MORE THAN 5 TONS!! The video gets 'deep in the weeds' for design and the build process so anyone can follow along and build a pair of these very useful and nearly indestructible horses.
Snappy bits and other tools used in the video and the Next Level Carpentry shop are available through links on this dedicated sawhorse build Influencer's Page at Amazon:
www.amazon.com/shop/nextlevel...
All items listed are the same low online cost to you but Amazon pays a small portion of their profit to the Channel which helps support production of videos you watch for free on KZbin and I really appreciate it!

[@javiergalvan25]

I must be doing something wrong because I bought 3 1/8" lag screws. The first leg went on fine, but when I began screwing in the opposing leg, the top lag bolt of the 2nd leg hit the bolt of the opposing leg where they embed into the I portion of the beam. I checked the amount of penetration and both are almost penetrating all the way through the I portion of the wood. Not sure if I need 2" lag bolts or if I missed an important part of the instructions here.

[@NextLevelCarpentry]

It doesn't seem to me like you missed any important part of instructions here but the problems you're having aren't too common. They sound more like they're fairly coincidental to me. Wouldn't surprise me if GRK changed product specs since I did this video making the 3" torx lags I talk about using 3 1/8" long instead? Good news is you're doing very accurate work if the screws hit each other in the middle of the I-Beam... kudos for that! To avoid the problem make sure to drive the lags perpendicular to the face of the leg so they go into the web of the I-Beam at an angle. You might intentionally use a slight sideways angle when driving the screws so they're less likely to hit in the middle. If you still have issues or want to solve the current issue of direct hit screws you can grind off 1/4" or so of length but I wouldn't go all the way down to lags just 2" long because that would only give you a weak 1/2" of penetration where it counts.

[@Capn_Codfish]

They did indeed change the spec. All I can find is 3-1/8 on these.

[@Capn_Codfish]

Also can not find #8 in 3" long. Anything over 2" goes to #9.

[@mattjackson3996]

​@@Capn_Codfishuse your best judgement when choosing the Fasteners and you might end up getting something a little bit longer and cutting them short with an angle grinder and cut off wheel to end up with the ideal length.

[@mattjackson3996]

​@@Capn_Codfishit won't be any issue at all to switch to a number 9 size fastener because the length is more important for those

[@bluecobra6294]

I watched, maybe 30 times, I listened intently and I finally constructed these Saw Horses Verbatim. The result was an industrial grade saw horse of unimaginable strength. Thankyou so so much. We are all locked down at home here in London and with this inspirational presentation I have found a whole new world of interest in this amazing art. I Salute you Sir Many thanks Rob

[@NextLevelCarpentry]

Wow Blue Cobra, thanks for undertaking these amidst 'home lockdown' and letting me know... you're quite welcome. Stay well and stay safe over there! Best, Matt

[@rickfakhre2400]

Just finished building these things. They turned out pretty good. I couldn't get the legs to be exactly the same length because I don't have a miter or table saw, but they were close. Not too much wobble. Some tips: After sawing the notches on the bottom beam and chipping some away, I used a wood rasp to flatten it out pretty easily. 2. Instead of drawing the profile of the beam through measuring, I just took an old 2x4 and traced it on the edge to make the I beam side view. Great video, I must have watched it 20 times by now with all the pausing and rewinding and rewatching to figure it all out. Thanks.

[@NextLevelCarpentry]

Way to work it out, Rick... your adaptations to work with tools at hand is excellent! Best, Matt

[@user-ic5tm3ec9u]

A lot of techniques and skills acquired over the years often get lost when someone retires or passes away. Thank you so much Matt for having the foresight to make these videos that will preserve all of this knowledge for generations to come. The extra key details show how much pride, thought, and dedication you have in your vocation.

[@bryanwanek46]

Great build sir. I built a cradle for my table saw that allowed me to make the tapered reliefs in the bottom of the I-beam more easily.

[@oldjim9642]

I happened across your channel and have now spent the last 5+ hours viewing your videos and reading comments. I have subscribed and am looking forward to all additional videos you produce. Not only have you done an outstanding job on the video production efforts, but every project has been of interest. Although not a carpenter, I have been doing wood work ever since my father began to show me his projects over 70 years ago. Your efforts will bring many new converts into the arena. I don't know what ability you have to sequence the comment entries, but "ball boy"('s) discussion several pages into these comments need to be read by every individual who wants to make a living using his personal talents. They describe a lesson that needs to be heard over and over by every young person. Thank you for your enjoyable presentations and take pride in the success of your efforts.

[@SantasWorkshop1964]

Thank you ! Today my 82 year old card carrying master carpenter father sat in his wheelchair and participated in making 4 pairs of these sawhorses. Just awesome and my dad thinks you're awesome . Thanks for a great project!

[@NextLevelCarpentry]

Please give a hearty high 5 to your carpenter father for me C Trucker! His is the generation I learned from and I'll always carry a great deal of respect and appreciation for guys like him. Glad you had fun with the build... those ponies should serve you well and long! Best, Matt BTW I'd be interested in your father's thoughts and impression of the Journeyman's sawhorses shown in this video (sorry if you've already seen it): kzbin.info/www/bejne/fYHXnJ2nmb95sLs

[@chm1701]

The information in this video, is as you say, the bomb! Really fantastic tips and tricks and ones that I know will be invaluable in the near future. Thanks Matt.

[@bradklaatu]

Just enough silliness to make the video educational and entertaining.

[@johnhamilton1098]

Absolutely love your channel. This has become my favorite you tube offering. Thanks for sharing your incredible knowledge. I learn a great deal from each and every video.

[@NextLevelCarpentry]

Glad to hear you're finding Next Level Carpentry helpful. I anticipate being able to devote more time to the channel to get more, better videos uploaded more often once this crazy summer's activities wane as winter rolls in. Look forward to your comments anytime, John! Best, Matt

[@carpenterone3]

I too have a masters degree from MIT (mistakes I’ve tried) lol You sir are awesome and I’m glad I found your channel several months back. Keep doing what your doing and never let the idiots that give you a thumbs down or arm chair Quarterbacks stop you from showing us the years of knowledge your willing to pass down. 👍

[@NextLevelCarpentry]

MIT is a popular school in our circles for sure Carpenter One! I'm glad you found Next Level Carpentry too, despite my shortcomings for promotion with social media, etc. From the beginning I realized that the only tool I have for growth in the world of KZbin is content and, with support from viewers like you, it seems to be working. I do believe the best is yet to come and am glad to know you're 'out there' in the audience! Best, Matt

[@jimsullivan9850]

Carpenter One3 1

[@prjndigo]

Hey, he knows his shit well.

[@zabihtoosky658]

Well, he is a PHD (Post Hole Digger) from MIT

[@stuartcooper7457]

This so-called master carpenter should know that a sawhorse is for sharpening saws, which is held in a vice and what he has made is a saw stool. PLEASE COULD SOMEBODY GET IT RIGHT FFS!

[@ElectricIguana]

Between the tiny saw horses and the giant pencil, I'm starting to question what was in that brownie I ate earlier.

[@NextLevelCarpentry]

Not to mention seeing double with two of the same guy in the shop... truly a potent brownie! Best, Matt

[@michael-si9xs]

same here, I'm 6 foot and the tiny saw horses would be a pain in the back. and in the knees.....lol

[@pablosancheztarrago4238]

man, on quarantine this comment made my day

[@armandosingca9422]

michael nu

[@DieCastoms]

@Dom Mck You should see the one he has made out of a whole 2x4 and a huge block of graphite.

[@whomadethatsaltysoup]

Thanks for taking the time to share your knowledge. Excellent tut' showing the simplicity and strength of your sawhorse design. I'll definitely give them a go, albeit in 3x2 as I won't be stacking anything like 16 tonnes on those puppies!

[@SmallWorkshopGuy]

Once again, the mixture of real world education and humor is refreshing!

[@NextLevelCarpentry]

Thanks SWG, glad to see your comment on this one! Best, Matt

[@fermp3690]

As long as the information is good, and yours is very good, I don't care how long the video is. I don't like quick videos that leave important information out. I'd rather have more info than I need than less than I need! I'm finding that each video I watch from you is enjoyable and very informative.

[@NextLevelCarpentry]

Really appreciate your comment fermp since I tend to over-inform than under leaving NLC videos longer than the typical KZbin recommendation of 10 minutes or less. Best, Matt

[@Revenant759]

I just want to say thank you for what you're sharing on KZbin. I know this is a lot of work to share all your knowledge. My father was master woodworker, mostly focused with building premium furniture. I didn't learn as much as I wanted before he passed away, but I'm filling in any gaps I can from other masters like you. This has been one of few very educational channels that explains both basics and advanced theories and concepts. Once I find a need for some real stellar sawhorses I will be building these!

[@reyunoen5748]

I really like that you guys put it on the real test and giving me an overview on the amount of weight it can carry. And the actual making on the video is great, especially that you have tested it outside.

[@tracybrislin]

Appreciate all the time you and your friends took to construct and demo the strength!

[@orcasea59]

Finally! Saw horses I can put my car on to change the oil! :) Matt, you've outdone yourself; this is a really excellent video in so many ways - great job! I really need a good set of horses and was leaning towards Paul Sellers' but these are clearly a notch (or three) above!

[@NextLevelCarpentry]

Thanks Orcasea, glad you like the video and the horses! If you're just building one set of ponies you might want to consider the Journeyman Style... I've never had a pair of them fail from normal loading requirements and much prefer them for overall useability. Glad to see your comment... hope you're having a good summer. Best, Matt

[@CarlCravens]

This is the first of your videos I've seen, and man, is it so refreshing: No click-bait title... says exactly what the video is about. Master carpenter demonstrating practical skills! Useful project. This is what woodworking youtube should be aspiring to.

[@NextLevelCarpentry]

Plenty more at Next Level Carpentry where this one came from 😉😎

[@edverbic7103]

Matt, That literally brought a tear to my eye.... seeing those two little poney's hold that much weight.. Matt, the things you do are AMAZING...! THANKS and stay safe... Best Ed😉

[@tubelife70]

Now that's what I call an exciting and befitting "Next Level" demonstration! Very well done Matt. Great Video!

[@NextLevelCarpentry]

Thanks Cameron... I really tried to get that kind of impact with this video and appreciate you saying so! The Journeyman Sawhorse video should be similar in build detail but, for the sake of practicality, be scaled back on the entertainment/stress test stuff. Hope you'll comment when I get around to getting it done! Best, Matt

[@michaelpeavey3264]

Just made a pair of these today. Love 'em. Easy to make, wicked strong and stackable. Thanks Matt. Love the channel.

[@NextLevelCarpentry]

Thanks for letting me know in your comment Michael... those ponies should serve you well for many years. Do me a favor and if anyone asks about them send them to the video and the channel? Every little bit of sharing helps make Next Level carpentry a little better and I really appreciate it. Best, Matt

[@michaelpeavey3264]

Will do.

[@vegandew]

Mind blown. Such an incredible weight carrying capacity from those simple sawhorses. Next Level Carpentry never ceases to amaze. Incredible video from beginning to end. Bravo!

[@DJe1957]

As a decendant of a ”Fine Carpenter” (my translation from Finnish) I like your approach. Practicality and simplicity first, and a bit of attention to fine details makes a lot of sense. I’ve watched several videos where some of the aspects are somewhat missing. Very refreshing and informative video, thank you!

[@shanehartley484]

One of the best overall woodworking video's I've seen. I wish I would have seen this before buying premade brackets.Thanks.

[@NextLevelCarpentry]

Hey Shane, I really appreciate your comment and thank you for it. The good thing about those sawhorse brackets you have is that they're likely to fail in short order and then that will give you excuse to build a set of these, right?!😆Best, Matt

[@guyrivard8613]

Matt Jackson is using a great design of these much used sawhorses. I use that design but have modified them only in that I have shorted both ends of the middle of that I-Beam on each end by 2.5 inches which enables a "grabbing ledge" which has helped in many situations. Thankew Matt.

[@NextLevelCarpentry]

I love that idea Guy... absolutely intuitive but I never thought of it😯 Thanks for adding it so tactfully here! Best, Matt

[@WhiteFox011]

@@NextLevelCarpentry We only stop learning when we die.

[@fredbosch5392]

Same here. Great for clamping big sheets.

[@Mytyweav]

THANK YOU!!! Love those sawhorses! I needed to see how to notch the lower parts of the I-beam to build a set that I've wanted for quite some time. Really enjoy the way you laid out the full size planform to arrive at ways to accurately measure/cut/notch. Hoping to have a couple built over the weekend. Thanks! AND I'm really looking forward to building Revision Two with the legs pushed out towards the ends... I really like your channel!

[@garfieldgurl]

Thank you for such a detailed video. I really enjoyed it! The stress test was amazing! I was in awe at how much these sawhorses can hold.

[@MyChrisfish]

Thank you Mr Jackson. This project was a real learning experience. And resulted in a SOLID feed out table for our saw. Thanks again for taking the time to teach all these techniques and the attention to detail.

[@NextLevelCarpentry]

You're quite welcome and I'm glad to hear it worked out😁😎👍Best, Matt

[@raymae60]

I have done carpentry for 50 years and built all kinds of horses, stools and benches, yet for some reason I found this vid downright entertaining. Thanks!

[@NextLevelCarpentry]

So cool raymae. Your track record and approval make your comment particularly gratifying... you're most certainly welcome! If you get a chance and are up for a bit more potential 'entertainment' take a few minutes to check out the 'Board Stretcher' video here on Next Level Carpentry... I'd welcome your reaction to that one as well. 😁😎 Best, Matt

[@billwilson6096]

raymae60 same here and I’ve been doing wood work for over 60 years. I’m always open to learning from great videos like this.

[@cogpastorc]

Hey, I've been making these saw horses for the past 40+ years. They really are this good. I have a set of them in my back yard right now. I have made some with shorter legs and a 2x6 for the top of the beam to stand on to reach ceilings and such. Thanks for a great video.

[@NextLevelCarpentry]

They've stood the test of time and use in the real world as long as I can remember too cogpastorc... thanks for adding your confirmation here! Best, Matt

[@DustyFixes]

I just like watching you work. You remind me of me back when dad and I were first starting out as finish carpenters. That being said, I think about 20 minutes is the perfect video length.

[@GetMeThere1]

Really excellent -- great job! I love seeing the combination of real woodworking and real-world, practical carpentry (i.e., precision techniques, with quick and easy, practical building methods). There's a tremendous amount to learn here for those of us weekend warriors trying to improve our skills.

[@NextLevelCarpentry]

Thanks GetMeThere... really appreciate your comment. Hope you find the 'precision techniques' useful and adaptable for whatever project you're working on. You sound like the sort of person who's capable of 'extrapolating' various marking, measuring and cutting things from this video to similar but different projects. Best, Matt

[@TempleThomas]

Some of the best saw horses I've ever seen I'm going to have to make these for sure. Subscribed.

[@NextLevelCarpentry]

Thanks for the sub Temple... enjoy the build... that is unless you like these Journeyman's Sawhorses better😀😎: kzbin.info/www/bejne/fYHXnJ2nmb95sLs Best, Matt

[@LitoGeorge]

I dont think I've ever commented twice on a video before. This video, revisited, is absolutely top shelf for so many good reasons. Thanks again Matt, you truly are a Master Carpenter.

[@NextLevelCarpentry]

Thanks... and thanks LitoGeorge... I really appreciate your high rating! Have you had a chance to watch the Professional Carpenter's Sawhorse build yet? kzbin.info/www/bejne/fYHXnJ2nmb95sLs I'm curious how you'd rate it too? Best, Matt

[@mattberg6816]

Hey Matt I’ve always used these for my finish set up and I travel with a customized mdo/hardwood bench set up with the mitre saw. I also keep some carpet tiles with me to protect floors

[@MJ-qt4dm]

Enjoyed seeing your "twin" and the light-hearted touch. Nice to see your channel growing, too!

[@NextLevelCarpentry]

Hey Mike; Chip, my 'twin', shows up in the video I just uploaded to Next Level Carpentry too: kzbin.info/www/bejne/oImchpechJqIjqM Just wish I could get HIM to work do the work so I can go goof off! Best, Matt

[@cindylucas3145]

This was next level entertaining and showed some very important skills for the aspiring carpenters out there. Thank you for this tutorial.

[@NextLevelCarpentry]

You're sure welcome Cindy... As your aspirations build your skillset you might find these sawhorses' advanced design another step on your journey: kzbin.info/www/bejne/fYHXnJ2nmb95sLs

[@michaelpack1198]

Hello Matt, thank you so much for sharing your knowledge and not being put off by the trolls. I just finished a "pony" sized pair of these at 19" high (my kneecap) and 24" wide for the purpose of lifting work off the ground to a manageable height AND using up excess 2x cut offs in the way in my shop. Another alteration I made was to use a T-beam with a 6" top and 4" bottom just for variety and to potentially gain a bit more working surface, clamping area, etc. I watched and researched DOZENS of articles and videos on Japanese sawhorses, Sawyer's benches, painter's benches, etc. before settling on yours. Obviously there are many, many I-beam sawhorses out there but I appreciate your attention to detail and the quality of instruction. As promised those notches gave me fits! In my case, because of milling the low edge ended precisely on the low corner. Just as I finished up it dawned on me that I could have simply ripped a 12* bevel along the two edges. I can't imagine that I would lose that much lateral strength and if so a fastener on both sides of each leg should get it back. I can't dispute the "skill builder" aspect of this part of the build. Thanks again.

[@NextLevelCarpentry]

Very cool, Michael... I always like to hear when someone 'gets it' on a video. The fact that you've extrapolated the info in this one to suit your purpose and needs tells me a lot! I like the idea of a lower set... and the wide top? Nice! The common sense observation about ripping the whole bottom piece at 12 degrees is just... great. Congrats! Best, Matt

[@casterman2]

Union Carpenter for 25 years. This was the first thing I was asked to do from my first employer. They got a good chuckle. Build mine now exactly the same way. Sometimes I’ll splay the legs at 15 degrees and make a slightly bigger gusset. The bottom lip of the I beam at the leg is a great place to store you framing square. You’re right these babies can hold the weight!

[@NextLevelCarpentry]

You KNOW it, casterman! Thanks for commenting... Best, Matt

[@brucemcnally3924]

Great work and really enjoyable editing, all too often these are irritating gimmicks but you make it work nicely. Thank you sir.

[@NextLevelCarpentry]

You're welcome Bruce... as a video production novice I often fear alienating viewers if I try to pull off some video editing magic and it falls flat so your comment is quite encouraging! Best, Matt

[@chandlerpiggs1006]

I will definitely build myself the exact same horses this weekend. Thanks for the video

[@NextLevelCarpentry]

Write the date on them when you get 'em done Chandler, because they're bound to last for a long, long time! You're welcome for the video... have fun building them! Best, Matt

[@vksubra1953]

I love that dry humour and the craftsmanship that goes with it. I devour wood working videos on KZbin and your channel was recommended by YT. And it was love at first sight. I like the way you do things and the clarity of your process. I am looking forward to seeing you set up your new workshop. Thanks for sharing

[@NextLevelCarpentry]

You're welcome Subra... I count on YT recommendation to 'spread the word' about Next Level Carpentry and am thankful they found you! The best is yet to come! Matt

[@MrFlynnytwo]

Just re watched this again! Entertaining, informative, a high standard of presentation, a useful and easy to make product, and it is clear that you know your stuff. Thanks for taking the time to show your 🎿 skills. You have forgot more than the haters will ever know! 👍

[@OffRoad-jh1do]

You know you're watching a true craftsman when they carry a handmade wooden toolbox! Great job!

[@NextLevelCarpentry]

Thanks for noticing and mentioning the toolbox ball boy... you've seen the main part of my marketing effort for doing custom design/build remodeling and custom cabinet work. That box, and a few other handmade carpenter's necessities, are the best advertisment a guy can carry! Best, Matt

[@OffRoad-jh1do]

@@NextLevelCarpentry I've been in the high-end Custom Construction in South Florida for over 25 years. We do high-end custom new construction homes, commercial Office Spaces, Remodel and we also have a custom cabinet shop. We're a full turn key service from the dirt all the way to handing over the Keys. The toughest part of his business is finding solid Craftsman employees. I cannot believe this new generation does not want to work with their hands. I've never made less than SIX figures in income from 19 years old on to my current age of 44. I pretty much been self employed as a licensed contractor since I was 22. So I can appreciate a fellow Crosman!

[@NextLevelCarpentry]

Sounds like pay scale is a bit higher in south Florida than here but, as you describe, a conscientious craftsman can always demand and get top-tier income if they apply themselves. It's great that you've built a business, career and livelihood in construction ball boy... we've both seen and heard those who's approach is not sustainable go down in flames when they don't build their company or their houses with fundamentals and good foundations. BTW Have you ever run across Steve Ogier down there? Does a lot of big development work... I've 'met' him through a mutual appreciation for applying cutting edge anything to optimize building. Anyways... thanks for your comments, I really appreciate the engaging dialog! Best, Matt

[@OffRoad-jh1do]

@@NextLevelCarpentryThank for you the kind words! I have been very fortunate in my career by building great relationships with high end clients. I always went above and beyond and left no detail unfinished. I have never advertised for my company from day one. It was all word of mouth. The friends of my clients have always kept my company in the high end circle. Because people with money keep close friends with people with money and I was their go to guy for custom cabinets and construction. I truly am blessed. All of my clients still call me to this day for any and all work. The wives love to update every few years or building their next dream home. Integrity, honestly, attention to detail and hard work were and are still the key to me success. I am so glad I found your channel it really inspires me to push myself even more. Thanks

[@OffRoad-jh1do]

@@NextLevelCarpentry The pay scale is not that high for employees I pay $15-$45 but as a self employed persons you can make $65.00 to over several hundred per hour by bidding jobs and being on top of your game.

[@ATeamCoach]

I've made several sets of these...my best pair went to my father (a life-long carpenter/contractor) as a gift...each time I learned more and more...can't over-emphasize , the need for STRAIGHT , non-rounded lumber...spent hours trying to get the first, couple of pairs to sit flat on the ground without wobbling....I still don't trust myself to guesstimate the center line on 2x4s....The blueprint on the scrap sheet is genius...!!

[@pilotdog68]

its this reason that I just went with some plastic horses. There's no such thing as a straight 2x4 around here, and now I don't have to worry about them in my musty garage either.

[@drewpickard554]

First one of your videos I've seen and it was a great video. I really appreciate how clear and concise you explain things. I see alot of youtube videos that are more showoff and less educational. I doubt I will be building these sawhorses, but I picked up quite a few good tricks I will be trying to incorporate into my building processes. Great Job!!!

[@NextLevelCarpentry]

Thanks for commenting on this, the first NLC video you've seen Drew... much appreciated. If I was recommending 'the best' pair of horses to build I'd actually not put these at the top of the list. Glad to know you picked up a few good tricks and think you'll find a few more in the Journeyman Style sawhorse video when I (eventually) get it produced and uploaded... plus maybe you'll decide to actually build that style! 😁😎 Best, Matt

[@thecrownedjester]

I finally got around to building these today and they’re great. Thanks for the detailed instructions.

[@bruceknapp2709]

Great video as usual. I loved the Ian Anderson stance at the miter saw.

[@NextLevelCarpentry]

Glad you like it Bruce... thanks for sayin'. I did not know that Ian Anderson used that stance too ( hope I have the right Ian Anderson?) . You can bet I wouldn't be able to play a flute and stand like that though... I can't play a flute no matter HOW I stand 😂 Best, Matt

[@williamsmith9026]

I just discovered your channel. Interesting concept you have going. A carpentry channel that actually teaches carpentry!!! In detail too. You'd be surprised how many channels do not do this well. Ive gotta go back through your videos now. Thanks for your efforts Do you take requests?

[@NextLevelCarpentry]

Really appreciate your comment William... it's been my goal to 'get into the weeds' with this carpentry stuff and intend to keep at it despite the difficulty of channel building without a constant flood of click bait and heavy social media activity. Not that I'm above using promotional tactics it's just that I'm barely capable of learning and keeping up with video production, much less instagoogletwitface. Viewers like you encourage me to continue trying to pack as much real, useful content into each video regardless of length and high octane video production. I may be able to take requests at some point but as it is my video production throughput is SO slow I have a hard time getting ideas published that have been in the pipeline for months and years. With any luck one of the already planned videos will coincidentally line up with random requests and make it seem like I can actually respond🙄😏😁 Best, Matt

[@jan48janice]

Corolos anti rust product

[@alanpayne1442]

Just discovered this channel and I rate it superb...will be watching more. I'm retired now and wish us oldie's had access to this sort of stuff when we were younger.

[@NextLevelCarpentry]

Thanks for the high rating Alan... much appreciated. 'Us oldies' used to rely on Fine Homebuilding Magazine for anything close to what's available online and on KZbin, right? It's a changing world, one I scramble to keep up with in producing these videos. Glad you'll be watching more and thankful you're able to put up with my low-level video production as I strive to present Next Level Carpentry. Best, Matt

[@tallyman15]

Just finished building these. Turned out great. Thanks for the tutorial.

[@MikeSydor]

Great video. Thanks for making that extra effort and nice to see you experimenting with some editing magic!

[@NextLevelCarpentry]

Thanks Mike... and thanks for referring to it as 'editing magic' instead of video production amateur hacks which is less kind but more accurate 🙄😁😎 Best, Matt

[@CordCrenshaw]

I agree. Matt’s channel is great and I’m enjoying watching how his style evolves.

[@NextLevelCarpentry]

Thanks Cord... slowly but surely evolving and thankful if you're enjoying how it unfolds. Best, Matt

[@michaelkulman7095]

At first I thought you were a giant! And yet the sawhorses held you! Then I thought you were tiny and yet able to use a normal carpenter's pencil, I was impressed. But how are both possible? I was confused... I'm thinking you may be normal sized and this is some kind of trickery! In any event a little more care makes the I beam style horse even stronger steeds than they already are. I like the length and detail of the video because sawhorses may very well be the first thing a lot of people make. Same with workbenches, you want a good one but your first one may not have the fanciest joinery and it might be the first or second thing a lot of people build. Many videos don't address this. I like the simple build that is super strong so you don't need to redo them or upgrade later... a lifetime tool, especially with a sacrifical top. Good job! Fun video!

[@NextLevelCarpentry]

Thanks for such a nice comment Michael! Thought you might like this video from Next Level Carpentry that shows a more advanced sawhorse design: kzbin.info/www/bejne/fYHXnJ2nmb95sLs Best, Matt

[@phillipjohnson7583]

Nicely done...video, sawhorse, and instructions. Excellent content!

[@namelesswarrior4760]

Such a privilege to be taught by a Master such as yourself! Thank you again for sharing

[@toddspeck9415]

Awesome testing! Amazing work.

[@NextLevelCarpentry]

Thanks Todd... it's great when things exceed expectations! Best, Matt

[@AlexLaw_Qld]

Bravo Sir, a pleasure to watch a craftsman at work.

[@NextLevelCarpentry]

Thanks for letting me know Alex... much appreciated! Best, Matt

[@deadliestcatch_toddstanley]

Great video! I built these today. I will say I eye balled all the screws and aligning of the top and bottom of the ibeam boards as well as all the chiseling. I couldn’t be bothered with all the work that went into the layout he did. I built mine out of pressure treat 2x4 and plan to use them strictly to support my cabover camper when storing off my truck. Reall great design! I built mine in about two hours total. Thanks for the great plans!!!

[@derekbeaumia8780]

Great in-depth instructions and explanation! Beautiful workmanship as well!

[@marcbatchelder6891]

Tons of fun. Thanks!

[@NextLevelCarpentry]

Indeed it was tons-o-fun, Marc... I confess I was getting a bit giddy by the end with that 3rd bunk of 16'ers! A fun part that didn't make it into the video was putting that bunk of 16's on top of the MINI sawhorses and, believe it or not, they actually supported it... for a second or so before they collapsed into a sad little pile of splinters! 😢 Best, Matt

[@jackpinnell3973]

awesome video! Building a set this weekend! Like your design on the "first gen" saw horses. Looking to seeing the video on the "second gen" saw horses!

[@NextLevelCarpentry]

Have fun with the build Jack! BTW here's the 'second gen' build video for you in case you want to start with the sequel: kzbin.info/www/bejne/fYHXnJ2nmb95sLs Best, Matt

[@MichaelBeirneVettedCapital]

really amazing content, composition and delivery! tip of the hat and looking forward to learning from you and teaching my son carpentry with your help! thank you!

[@brucemartens2418]

GREAT video. Very clear and through. Thank you so much!!!

[@danhartman9087]

I've been watching DIY, carpentry and woodworking videos for years on KZbin. Just came across your channel as a "recommended" video. Where have you been?!?!? YT works in weird ways sometimes. I come from a mechanical background but have given that up as "well to do" folks have driven me out of hot rodding and drag racing - I simply cant afford it anymore. So about 5 years ago - I switched to woodworking. AT first, I made more firewood than useable items, but less and less goes into the fireplace these days as skills and tools improve. So who says you cant teach an old dog (60 y/o) new tricks? I learn every day, largely due to folks like you. Thank you for these. "Like" and "Subscribe".

[@NextLevelCarpentry]

Thanks Dan... good to 'meet' you. I've been here 'priming the YT pump' for over three years, just trying to figure it out. Starting to get a bit of a trickle out of that pump recently and, with enthusiastic engagement from viewers like you have high hopes for the future... thanks for the Like and Sub! Glad to hear you're enjoying and improving in your woodworking endeavors... it can be very rewarding, as you know. There's a contingent of 'well to do' folks in this field too (Fine Woodworking et al) but there's enough latitude that their activity and influence don't hamper the success or determination of the rest of us. BTW Next Level Carpentry Channel isn't set up all that well so I hope you'll find your way to the Videos tab to browse through some of the more obscure videos there. I put a lot of effort into some of those but they don't seem to come up much with the 'weird ways' of YT. Best, Matt

[@deliman7203]

Yes I too am a new sub and similar to Dan I got introduced to your channel by the 'Recommended' feed. So next time you sit down with the You Tube Brass, tell them their process for giving exposure to lesser known (subs) channels like yours is unfair. I've been subscribed to many DIY's channels for years, but have never seen any recommendation for your channel. It's usually channels with mega subs but are of no interest to me. Anyways I'm glad I've found your channel.

[@NextLevelCarpentry]

Glad to hear it deliman.. thanks for that sub! How I WISH I had a chance to sit down with the KZbin brass but that just doesn't happen. It's good to know you found NLC from the Recommended feed because it means I must be starting to do something right in view of the all-powerful 'algorithm'. There's SO much to learn about being a content producer that I don't have time or ambition to learn so I pretty much go with a 'ready, fire, aim' approach, which seems like is starting to get some traction. Believe me when I say this sort of interaction from appreciate viewers like you provides the mental energy and motivation to keep at it... Next Level Carpentry and I go nowhere without you so thank YOU! The best is yet to come... Regards, Matt

[@JohnSmith-yl9en]

If I´m not wrong, KZbin rewards frequency of uploads rather than the quality of content. I am sure that users that care about quality will thank you.

[@NextLevelCarpentry]

There's a lot I don't know about KZbin, John, but there's certainly a link between upload frequency and channel popularity that I'll doubt I'll ever be able to achieve. It seems there's enough viewers like you who care about content quality to build a solid presence in a YT channel so I plan to keep going the direction that has brought me this far. I do plan to transition from working to support Next Level Carpentry to having NLC BE my work... all in good time. I see what Scott Wadsworth of Essential Craftsman has done and is doing and aspire to at least a fraction of that; better to reach for a star and only make it to a streetlamp than to aim for the streetlamp and never get off the ground, right? Best, Matt

[@adriantrain2037]

Your videos are outstanding........

[@NextLevelCarpentry]

Why thanks you, Adrian! I really try but am always a bit disappointed by my videos because the final cut falls far short of the spectacular cinematic experience I envision when I start. Makes me thankful for viewers like you who see more in them than amateur video productions. Best, Matt

[@martyjosephson4937]

Thanks Matt, that was very enjoying!! and informative as always.

[@johntripp8093]

Great job, I inherited my Dad's saw horses so this has inspired me to make a set for my grandson, thanks. I will be using your design.

[@NextLevelCarpentry]

This design will definitely survive as an heirloom John... have fun making a legacy pair for your grandson. Best, Matt

[@ericfay5531]

2:36 Materials 6 8' good quality 2*4 Scrap plywood for gussets (2*4)' scrap sheet material 2:53 Fasteners 20 #8 3" torque drive construction screws 24 3" GRK torque lags 16 #8 (1+3/4)" torque drive construction screws 3:33 Tools Tape measure, carpenters pencil, papermate twist lead pencil, hammer, wood chisel, speed square, sharp hand saw (pull saw), t30 and t25 torque drive bits, snappy counter sinking pilot hole bit, 3/16" twist driblet, and good cordless driver drill Circular or miter saw Access to table preferable

[@APWoodworking]

Thanks buddy!

[@dougywales]

That would be Torx not Torque

[@brianmoore3988]

Thank you for that!

[@arlinsteffanson8286]

I made mine a year ago, with a 2x6 on top of i beam. it was so good l built another with a 2x12 on top, then added 2 shelves under it. it is much more than a saw horse, it is a work horse.

[@NextLevelCarpentry]

Sounds like a Clydesdale more than a quarterhorse, Arlin! No matter as long as its doing the job for you! Thanks for sharing your variations in a comment... Best, Matt

[@danielalamo2075]

When we built our dream home, a log house with wrap around porch, the construction crew that stacked the logs (and framed the inside of the house ) built two sets of those saw horses but without the 12 degree beveled section. It's be over 13 years and they have twisted over the years but I still use them occasionally. The crew said they build this style at every job site because they are very strong and sturdy. And once the top 2x4 gets too tore up, you just replace it and it's as good as new. One set is four feet and one is six or eight. I just stumbled upon your channel. Nice video. I definitely will be watching more.

[@ajienolasco]

I'm getting started into woodworking and been watching videos on YT. Your channel is the first one I subscribed to. Awesome videos, great skills and and equally great humor in the mix!

[@NextLevelCarpentry]

Welcome to the world of woodworking Aaron... with so many channels devoted to the art it's a compliment that you chose Next Level Carpentry to subscribe to first. You'll see many channels with more advanced video production but I hope the content you find here will keep you watching. Best, Matt

[@EdugeBDroN]

I'd be lying if I said, I got it all the first time, but delightful to watch. I always knew true masters of their craft are also humble about it. I think if I watch another 50 times, I'll get that I beam profile thing with the nail, I hope

[@NextLevelCarpentry]

Eduge; I think you underestimate yourself. Give that concept time to process a little bit and take another run at it and I bet you'll have it down in no time. Keep in mind that you can just use the angle measurements I give in the video along with the length of the leg and everything should come out fine but understanding and being able to go through those angle finding steps is useful for this as well as unlimited other applications so it's worth taking the time to learn it. Also keep in mind that there's any number of different ways of figuring those things out the nail is just one that I like and happened to use for this example. Thanks for watching... Best, Matt

[@StevenPG72]

I made a pair of these exactly to your specs and they work great for me. I'm old school and don't like using those 2lb plastic crap horses they sell nowadays. Thank you for the video was great!

[@NextLevelCarpentry]

Good on you SSgt Steven! They'll serve you well for as long as you need 'em to! Best, Matt

[@WhiteFox011]

I have only watched a few of your many videos, and I like your approach. You obviously know your stuff, but you don't lord it over your audience.

[@dandugan824]

I had just a little difficulty building these, but after re-watching several segments I was able to complete this project with no real issues. Thanks for the great video! The project was really inexpensive - right up to those GRK torx head lag screws- but the saw horses are solid and will last for many years. Thank you for sharing.

[@NextLevelCarpentry]

Glad you made it through to 'victory' Dan... in my experience the investment for fasteners amortizes out as a sensible part of project cost. Best, Matt

[@yzmoto80]

Nice video, great editing ! I have 30 years in the trade, my back and hands hurt just saying that. Just rip a bevel on both edges of the bottom web of the I-beam, (since your using the table saw), rather than making a notch, there isn’t enough “meat” on the sides of the notch to be of any significant lateral strength with soft wood. And while your cutting your bevel on the ends of your legs, mitre them also (5 degrees), keeps the foot print wider than the beam in all directions...trapeze.

[@michaelmcclellan9422]

I agree, not worth the investment of time for the slight increase of strength they provide, (the open mortises). In my union apprenticeship, ( which was well over 30 years ago), I was taught the 15 degree rule. It makes a easy and quickly built, strong, sawhorse. Every single angle is 15 degrees. Use glue and screws. 2×6" top stretcher and 1×6" legs with (4)-3/4 plywood gussets. Use quality, knot free lumber.

[@samwoo7935]

Awesome job!! Can't wait for the next version of your sawhorse. Totally dig your zen stance while using your chop saw 6:28 .

[@NextLevelCarpentry]

Thanks Sam... I'm excited about doing the Journeyman's Style sawhorse build video too... although it's going to be a while before I get to it... thanks for your patience. From now on I shall adopt your 'zen stance' term for what I need to do because I'm too lazy to pull a support stand over by the miter box like I should 🙄😁😎 Best, Matt

[@natephillips1696]

Next Level Carpentry maybe that's a new video, yoga for carpenter's, or a stand build for the saw.

[@NextLevelCarpentry]

Possibilities are endless, right Nate?! 😎

[@CCCfeinman55]

I truly enjoy learning from and laughing with you! Masterful work. Thank you for sharing.

[@NextLevelCarpentry]

Fantastic Chuck thanks for letting me know your thoughts in this comment! Best, Matt

[@arlindkrasniqi3315]

I just build a couple of these saw horses, truly amazing. Thanks Matt and keep them coming please. Igor one appreciate it greatly.

[@NextLevelCarpentry]

Always glad to hear when some builds a pair of these Arlind... thanks for lettin' me know. Best, Matt

[@rickjohnson4956]

Hah!...I found your video by chance, very good! I made a set of sawhorses like these at least 40 or 45 years ago and still using them today. I had seen the style in my friend's Dad's shop. He was a very intelligent man and a craftsman and I presumed it was his design. His and my pair are the only ones that I had seen of this style until this video. A few years ago I made a half size pair, they are very handy too. One detail that I made on mine was to make the tops of the legs flush with the edge of the top rail.

[@NextLevelCarpentry]

It's a tried and true design with a heavy dose of practicality tossed in for good measure! Best, Matt

[@FinishCarpentryTV]

You had me fooled at 0:20 !!!!

[@NextLevelCarpentry]

SAWHEET! wasn't sure how that little stunt would play but sounds like it worked... at least a little bit 😉 Thanks for adding a comment here!! Best, Matt

[@mranderson4194]

Lol.... that was funny. ...they looked real. ... love the pencil

[@NextLevelCarpentry]

Thanks Shawn... glad the little 'video magic' worked as I'd hoped! More to come about the pencil... stay tuned! Best, Matt

[@myRefuge3710]

I was like WHOA!!! Then I was like... WhOA!

[@isaacrobinson7050]

I’d fire someone for fooling around with sawhorses like that!

[@itsElsgoo]

What a thorough and insightful demonstration... I stumbled onto this looking for method of how to calculate height, angle and leg length measurements ... The beam profile with the nail pivot is genius. Solved my issue, as well as compelled me to practice the craft (love how notching out the beam really locked it up) and build a set of sawhorses I didn’t really need but am glad I have now!

[@NextLevelCarpentry]

Thanks for watching and commenting here Tim... congrats on the sawhorse build. I think you'll find yourself needing them more often that you thought... Best, Matt

[@gsford3264]

Very much appreciated. The details you provided helped greatly.

[@bigjohn606]

Hi Matt... great minds hey. I've had a set of these for the last 20 years and I've only had to replace the I beams and legs twice. It always makes me laugh when I see how much money people are prepared to spend on ready made equipment and jigs when they have the necessary skill and mind set to produce their own solutions, and as you said, I think it creates a good impression for the customer when you turn up with handmade tool boxes etc. The other thing with sawhorses is that you can make them to fit your own height dimensions, and being 6 foot 7 inches, nothing shop bought fits me.Very interested to see your journeyman design in comparison to mine, but lets face it, those plastic ones are about as good as a box of matches in a wind tunnel. All the best Big John.

[@NextLevelCarpentry]

Thanks for your comment Big John... no surprise to me we've similar taste and reasons for this sort of thing. Funny you mention horse height being an issue for you. Some years ago I worked with a very capable carpenter who was height challenged. He had his very own set of saw ponies... they were a good 6" shorter than my preferred height. Good thing he had such a great sense of humor because he got razzed on a daily basis about his 'minnie-whinnies'! BTW I'll always remember and appreciate this guy as the one who showed ME how to use the slide hammer nail puller featured in another NLC video. 'box of matches in a wind tunnel'... LOL!! Best, Matt

[@dodgeme1986truck]

I don't care for the flimsy cheaply made expensively purchased store bought ones either... I picked up 2 sets of them (that looked like the best design they had) for a weekend project out of town from China freight (aka harbor freight)not expecting them to last more than the weekend but they didn't even last the 2 days including problems with stability as the plastic feet on the metal legs kept splitting under the weight of 16 sheets of 3/4 4x8 marine plywood and all 4 frames finally buckled by the end of the weekend. I had one set setup as a cutting/routing table via screwed on plywood top the other set was to keep the material off the ground and clean while it rained over night as the ground was level rock hard packed barren dirt. That would've splashed surface mud onto the clean plywood.

[@NextLevelCarpentry]

Sometimes you gotta go with less than ideal like on your out of town project when other options just aren't practical, right DL? Makes you appreciate a better setup for things like horses when it fits into your program... hope you get a chance to put a similar stack on a pair of these ponies someday! Just for grins maybe you can put a full bunk on just to say you did? 😁😂😎 Best, Matt

[@Honu425]

instagoogletwitface!!! I love it!

[@NextLevelCarpentry]

It's good for a laugh for sure Honu! I only wish I could claim to have thought it up my self but I just borrowed it from someone much funnier than me... Best, Matt

[@user-kl6ej9zh2i]

That was the best part.

[@simonfuller8940]

Im no computer geek, that comment had me busting a gut in laughter

[@juancarlosverdugosanchez4296]

i dont understand why people would give you the negative hand. you are very professional, funny and know the job. Thank you my friend from Mexico.

[@NextLevelCarpentry]

Gracias Juan... thanks for posting such a nice comment here... much appreciated! Best, Matt

[@dwokie1]

Gotta say, I’m new to this channel but his videos are top-rate and fun to watch. I’ve learned at least 5 new shortcuts that’ll help in building almost anything. Thanks!

[@cheewurz]

Matt...didn't see a Link in your Video on Sharpening Carpenters Pencils? ;)

[@NextLevelCarpentry]

I need you for a channel manager cheewurz... totally missed that opportunity, but I'm adding it right now at your suggestion! Thanks! Matt

[@joefoley1480]

ha ha ha ha

[@USMCMCG]

That’s some fancy triangle brace on the left side of your miter saw😂

[@NextLevelCarpentry]

Like that eh Chris? I've had it since I was born and find it useful for all manner of things, not the least of which is that extension table you see in the video 😁 Best, Matt

[@lisabrown8094]

I am so impressed. Thank you. Just starting in this field and this helps me so much.

[@enriquelagunes8695]

Thanks a lot for this video I’m learning something new you’re really smart and nice sense of humor!! From North Carolina we said thank you!!

[@NextLevelCarpentry]

I appreciate your comment Enrique, especially since you're able to tolerate my 'nice sense of humor' 😂 I'm glad you're learning stuff from Next Level Carpentry videos and I hope you find others helpful. Best, Matt

[@AndrewBrowner]

if you have solid ground have your lumber delivered onto a set of these and itll save you bending over to grab a board about 200 times a day if youre framing

[@NextLevelCarpentry]

That's the main idea Andrew for sure! I'm always amazed when I see someone working with lumber on the ground for want of a simple pair of ponies! Best, Matt

[@2010pinmaster]

I know a lot of people who use saw horses for cutting 4X8 sheets of plywood. You have to mark on side then go around the sheet to mark the other side, hook your chalk line then walk back on the other side to snap it, cut half the sheet, walk back around the other side to finish cutting the rest. It's totally inefficient. I'd rather cut from the pile right on the ground, it's faster, more efficient and makes for straighter cuts. As for putting lumber on these, you would need 5 or 6 pairs as we use 2X4's, 2X6's, long 2X4's, long 2X6's, 2X10's and LVL's of different lengths. You also risk injuries by having the pile of lumber topple over you.

[@NextLevelCarpentry]

What happens when you don't have 'a pile on the ground', 2010? Or when you're 1/2 way down through that pile and have to crawl around to make cuts? Everyone adapts their own methods but personally I've never had the difficulties you describe as problematic. For instance, why don't you just pile lumber of different types, sizes and lengths on one pair of horses as you cut and work on it? It doesn't take a prohibitive amount of mindfulness to keep lumber from toppling on your either. If you don't like these (or any) sawhorses for your particular workflow it's no big deal but it does seem a bit odd to imply that other people using them must be 'totally inefficient'. Best, Matt

[@keithforbes2326]

16k pounds of 2x4s puts Matthias Wandels' "jump test" to shame! 😂

[@craftyshed]

Great video. After watching your video I did a similar project just with few modifications. It turned out extremely strong as well (I wish I can test them the same way). Thank you very much.

[@nileshkavate5269]

Amazing display of strength and more than that loved watching your presentation..awesome and keep up the good work

[@oby-1607]

One brother sure talks a lot and the other does all the work. Would be quicker if they worked together. I subscribed as I enjoyed this.

[@NextLevelCarpentry]

Good thing both brothers aren't talkers, right Oby-1... we'd never get ANYTHING done! Thanks for subscribing! Best, Matt

[@ericfay5531]

5:03 "We best get to work"

[@normnicholson]

I'm a steel fabricator that wood works too, and the way you layed out the centers and hole positions was great to see. Fast and accurate!

[@NextLevelCarpentry]

Thanks for your comment Norm... anytime someone from the construction trades sends a compliment it's very rewarding... hope you can put a tip or two from the video to use... Best, Matt