sawing more pine siding for the building , hope you enjoy!
Пікірлер: 322
@alphafarabee94053 жыл бұрын
Mark...would it be possible to have a camera displaying the boards and they to through the edger. It would be entertaining to see crooked boards coming out square (up close where we could see it happen). Great skill. Love to watch.
@markgalicic77883 жыл бұрын
yes sir
@firesurfer3 жыл бұрын
@@markgalicic7788 It would be nice to see some closeups of those bowls from the beginning. 2:25
@halfdohm3 жыл бұрын
I'd like to see that also.
@finnbrody83793 жыл бұрын
Instablaster.
@michaelcoceski54423 жыл бұрын
Hi Mark, is that THE Edie Horvath I've been hearing about all the way here in Australia ? I'm curious - what is the kerf of the blade - approximately ?
@markgalicic77883 жыл бұрын
yes it is THE Eddie Horvath. we run a 9/32" kerf.
@levialexander71773 жыл бұрын
You need a vertical edger. Ever thought about it?
@markgalicic77883 жыл бұрын
we don't have three phase power to run one.
@levialexander71773 жыл бұрын
@@markgalicic7788 I seen a amish mill with a 671 on it and a vertical edger and they had hydraulic pumps running the eletric motors
@Thief4003 жыл бұрын
We loved listening to Mikes stories, he will be missed but the good Lord has plans for him. It was from his channel we found yours. Keep up the great videos.
@markgalicic77883 жыл бұрын
Thanks for coming
@deaddadd3 жыл бұрын
Out of the Woods is a good channel. Nathan knows what he's doing. I sub to both you guys
@OutoftheWoods06233 жыл бұрын
what I like to hear appreciate it, Mark is my fav channel, has be wanting one of those circle mills,
@markgalicic77883 жыл бұрын
yes he does.
@aporter7013 жыл бұрын
...and Mark, thanks for putting me on to FricknJeep..he's pretty cool to watch.Art
@TheWildWestMill29 күн бұрын
Nathan. John and Mark all have awesome KZbin channels
@bluethunder19513 жыл бұрын
Here in New Brunswick along the St, John River on my property I have some giant white pines, some are over 4’ in dia, I have stumps that are over 6/8 feet in dia, that were cut over a hundred years ago, story is they would float them down to the ocean and send them back to England for the Kings ships, they made the sail masts out of them.
@markgalicic77883 жыл бұрын
some huge ones.
@sharpshooter4703 жыл бұрын
Here is info on the "King's Pine" Article from the NH Historical Society On May 10, 1708, the General Court passed an act to preserve all “Mast Trees” or white pine trees within the province of New Hampshire for the Crown’s Royal Navy. This action rubber-stamped an earlier 1691 English law that declared all pines with a diameter of 24 inches or more the property of the Crown and imposed a fine of £50 for each tree illegally cut. Chuck D
@wayneabbott6523 жыл бұрын
one hell of a fine worth about Horses: 9 Cows: 12 Wool: 83 stones Wheat: 25 quarters Wages: 550 days (skilled tradesman)
@markgalicic77883 жыл бұрын
thanks for the info.
@steveking49663 жыл бұрын
thats interesting in Ireland probably up until independence trees above 9" dia were estate or crown owned! Hence a lot of young trees were harvested early, as a woodsman and UK citizen , I am seriously pissed at UK forestry history!
@clarencetrice44422 жыл бұрын
hi Mark do you have any really good stories like Matt Mccoy about sawmilling over the years all good 12 21 2021
@clarencetrice44422 жыл бұрын
HI MARK U ☺😊🙂🤗😀😄 talk about saw guides on the frick sawmills U had a hard piece of white oak wood for a saw guide I,VE seen a many 1 like 👍😀😳😄😉 that OMG 5 14 2O22
@clarencetrice44422 жыл бұрын
HI MARK pretty pine log making pretty wide boards all almost as pretty yellow pine 💛 OMG 6 9 2O22
@eldoradowoodcrafthobbies38883 жыл бұрын
Thank you fir the kind words for Mike McCoy it’s very personal when us old men mill just to feel alive and cherish our last few day. Thank you 🙏 so very much.
@markgalicic77883 жыл бұрын
Well said!
@tennesseesawmillguy15903 жыл бұрын
That was a fat stick. Nice mention of Mike. He sure was good about telling an old mountain story while sawing. Thank goodness for this KZbin stuff, that everyone gets to enjoy the sawing and jawing. I was waiting for you to lay that down and start sawing the 10”... it was rock and roll time. Great stuff. Thanks for sharing.
@markgalicic77883 жыл бұрын
thank you sir !
@clarencetrice44422 жыл бұрын
hey Mark have you ever sawed any big sugar pine logs 12 21 2021
@johnmudra87852 жыл бұрын
I..❤..YOUR BIG. LOG..&..LONG LOG VIDEO.S..SO EXCITING.. KEEP UP THE GREAT WORK ...ALWAYS. A . FAN...JOHN.M..❤
@davidhensley763 жыл бұрын
When you box the end truss on Horvath Hall it might make enough shade to see the laser better. Eddie won't have to wear a shade hat then. 🤠
@markgalicic77883 жыл бұрын
yes it will.
@oldtireman46653 жыл бұрын
Does Eddie use any particular treatment on his beard? It looked especially luxurious and full, brushed out today. Plans to put the edger under roof? I thought it was to be covered with current addition. Another subscriber thought not. When I was a kid, my Dad laid his ankle open with a double bit ax cutting boards off an oak log that the blade couldn’t clear. He was standing on top and it glanced off a knot. Then, the wound got infected and gave him fits for years.
@markgalicic77883 жыл бұрын
yes we hope to move the edger under roof .
@jamesthompson81338 ай бұрын
I think Eddie wore his boots down on this one. All I can say is WOW!!! Thanks guys that was great fun!!!
@michaelm38813 жыл бұрын
That was a nice stick of pine! Now, did you saw it before or after killing the pumpkin? I miss Mike McCoy also. God probably has him sawing lumber over on the other side, telling stories to the angels! Hope you had a nice Halloween. People have been calling me to perform weddings on Saturdays, so that is the reason I haven't been over. Hope to see you two soon!
@markgalicic77883 жыл бұрын
thanks pastor Michael , we sawed it after to clean off the blade.
@rudycarlson82453 жыл бұрын
I agree Mark pine is the best word for starting fires especially if you’re going to be burning oak Mike will be missed I know I will miss him we miss him telling his stories and will miss the mill Chad said that the new owner once he has it set back up he will put videos out on it I hope he does thanks for the videos
@markgalicic77883 жыл бұрын
yes it burns hot.
@mac-vy1iv3 жыл бұрын
Hi Mark ! Nathan said to stop by and give a shout out so Hello from Eastern Canada enjoying this 60 plus weather.
@markgalicic77883 жыл бұрын
Thanks for coming
@railerz20003 жыл бұрын
Watching a sawmill in action is bloody relaxing. Thanks for the videos Mark!
@markgalicic77883 жыл бұрын
glad you like
@morgansword3 жыл бұрын
I have lived 73 years and today I learn of Kings mast and kings arrows... reminds me that we are lucky that those times are behind us. I was in the army and the thought of going into battle with a sword or arrows or even worse, find a weapon cause not everyone was dispensed with one.... bariatric battle skills.... chilling to the bone!. I do need to check mikes channel as I didn't think that someone was posting so thanks
@markgalicic77883 жыл бұрын
yes sir.
@ChrisSmith-io5vw3 жыл бұрын
I want to thank you but two guys I know you both work hard I enjoy your show I enjoy your commentary I've never worked at a meal as nice as yours I worked at 1 and Old Mill where they was four of us working in the to pulling the leaver they had the easiest job I didn't ever get to look at the wood until I was unloading it off the trailer or the truck and stacking it I hope you all keep continue working and thank you I enjoy your show thank you I'm a shut-in i was the one loading the lumber fast pace thank you
@troytreeguy Жыл бұрын
The kings pine were branded during colonial days for use as mast aboard the kings navy fleet. One of the last standing ones was cut down some time in the 70’s in a neighboring town and was used for a ship reconstruction. Where I live and work we have groves of white pine 36” diameter and some reaching 135’ in height. Sometimes I get to bring the wood home 😊
@clarencetrice44422 жыл бұрын
HI MARK that's some pretty pine that looks good 👍👌😀😊😄😋 almost as pretty as yellow pine good 👍 looking grain color OMG 5 14 2O22
@OutoftheWoods06233 жыл бұрын
appreciate it Mark,
@markgalicic77883 жыл бұрын
hope you make a 100K soon!
@PeterWMeek3 жыл бұрын
Somewhere, either just before or just after WWII, my father acquired a handful of 16" wide, clear, white pine boards. They had all pure vertical grain with hardly any visible curvature, which means they must have come from a tree well in excess of 40" and been sawn with a profligate attitude towards scrap.. There was not a single knot in any of the boards; the grain ran straight as a die from end to end. He used them only for special projects, and reclaimed the wood if the project fell into disuse. Still, they gradually vanished. I now have only a few short pieces - the doors of a small cupboard - and they have many holes from the fasteners of earlier projects. But, they are still completely flat 80 years later. It may seem silly, but I consider them to be family heirlooms (which is a mighty noble title for a couple of 16" by 30" boards).
@markgalicic77883 жыл бұрын
very nice.
@philmorrison68983 жыл бұрын
Nathen sent me! It’s all his fault! LOL!
@markgalicic77883 жыл бұрын
hope you like.
@willieessmann7805 ай бұрын
A plank is a long thick board that is rough-sawn, and that is left "unfinished", that is, unplaned and unjointed. A board can be sold rough-sawn, or it can be sold fully finished, planed and jointed, or finished on two faces only. Boards can be short (say under 2 feet) or long (say 12 feet). Boards can be relatively thin (1/2, 3/4, 1 inch,); above one inch thickness boards are referred to as 6/4, 8/4, and 12/4 boards in the US. Those are the standard nominal thicknesses
@SUROBLEDEKchannel3 жыл бұрын
Present buddy,join listening🙏🙏🤝🤝🤝
@Snowtruckdriver3 жыл бұрын
Thank you for mentioning Mike McCoy. I'll miss him a lot now that he is gone. He is the reason that I came to watch you guys. Have a great day.
@markgalicic77883 жыл бұрын
we all miss good ole Mike.
@loislewis99002 жыл бұрын
Sorry to have missed out onyour name thelog mover. Had some silly ideas: ....creepy crawler, Logan flipper, the octopus, uppity grabber, the hungry arms....lol. I enjoy watching you guys at work, mann glitter and all. Boom, booooom.😁😍
@martyhoyt31173 жыл бұрын
I noticed your carriage swing arm POST close to the blade is narrowed. .could you move it back 4" re-weld it station again without interfering the belt drives from BUS MOTOR... it would give you full cut facingsof 24/26"
@peewee.31383 жыл бұрын
Whatever you and THE Eddie Horvath put out for content, I will watch. I grew up in Northeastern New Brunswick, Canada, in the 80’s and remember my dad taking spruce logs to a friend’s mill to make lumber for a shed for our snowmobiles. When I was in high school, I worked in a sawmill where we did eastern white cedar 6x6’s and then milled them into a log home log. You can’t beat the smell of cedar. Yes, Mike McCoy will he missed every day. I hope that Chad becomes #1 in the #2 business with his septic truck and hopefully he can keep “Mother” for the odd clip! Thank you for the great videos. John from North of Toronto!
@markgalicic77883 жыл бұрын
glad you like.
@martinwyke3 жыл бұрын
This was the next video that was offered up on this subject, milling coconut wood old school by eye on an unguarded blade that was hand sharpened. kzbin.info/www/bejne/ina5p5duZrtqg9U
@janetflecher26833 жыл бұрын
King's Pine refers to the fact the King of England claimed all of the massive pines for building was ships, especially for using the white pines for masts in sailing ships.
@g.m.fallon31353 жыл бұрын
Janet Flecher They also referred to it as, "Kings Arrow Pine". Beautiful tight straight grain and light.
@markgalicic77883 жыл бұрын
thanks for the info.
@kenrusmisel1273 жыл бұрын
Check out Matthew Cremonas channel he has a huge band mill an cuts massive logs. Very entertaining stuff.
@jimcurrier39223 жыл бұрын
I have sawn a King's arrow pine. the Kingsmen went through New England marking straight pine for ship masts, it was illegal to cut a pine that had the King's brand on it. as soon as we saw the King's carrow on the pine we were cutting we took it off the saw. and called the University of Maine and they came and took it.
@markgalicic77883 жыл бұрын
wow a good story.
@vaughnhill34373 жыл бұрын
I would like to have a pile of those thin full width tonlay down for a livingroom floor side by side with a half inch gap in between them then pour polyeurethane over it all about a half inch thick and that would make a kick ass floor if you could lay it wall to wall
@thomream18883 жыл бұрын
You know Mark - that last skinny cut looked like you were making Pine rolling paper for Eddie's smokes! Nice job guys. And Happy Thanksgiving!
@markgalicic77883 жыл бұрын
thanks Thom, Happy thanksgiving !
@jamesthompson81338 ай бұрын
Yea, that would be one hell of a smoke! That was fun!!
@almarr19859 ай бұрын
Why don’t you want to put up the boards 20 inches wide? Thanks just curious
@robintaylor-mockingeemill82233 жыл бұрын
Nice pine Mark . Not much blue stain there .
@markgalicic77883 жыл бұрын
yes it was fresh cut.
@deernutOO3 жыл бұрын
Agree with you, sure miss Mike McCoy. One of a kind for sure. His videos should last forever.
@markgalicic77883 жыл бұрын
yes sir.
@donmunro75682 жыл бұрын
Kings pine refers to the need for large pine needed for ship building. Had a suspension but had to Google it.
@loizostheochari15093 жыл бұрын
Mark running a saw mill is back breaking. Eddie liifts those planks of wood like tissue paper. Eddie must getting sore by end of the day. A nice hot bath with empson salt should take the pain away. Live Long and Prosper Mark and Eddie.
@markgalicic77883 жыл бұрын
very hard work.
@mifsanta3 жыл бұрын
Mark I did tune in to john mill He works Single handed and it’s dangerous
@davedonnell13933 жыл бұрын
Would have been Mikes birthday today. True gentleman will be missed
@markgalicic77883 жыл бұрын
yes I did see that.
@DewJohnson13 жыл бұрын
I can't get enough of this saw! I have a 30" bandsaw, slow but fun, I only do live edge slabs. Keep up the good work!
@markgalicic77883 жыл бұрын
thanks Dewey.
@annewelford30163 жыл бұрын
Was wondering if yall have a tag from Mississippi?
@JohnWhite-si4xc3 жыл бұрын
Yes that was a class act to mentioning Mike McCoy he was a great one for sawing that big old pine and tell them story sure miss that thank you so much and by the way nice looking pine you sawed
@markgalicic77883 жыл бұрын
thanks John.
@joemc1113 жыл бұрын
Great video Mark And Eddie, nice touch on the burn barrel with Eddies name cut in the top side, Mark your auto is working great when the edger was running. I think anything you do on the mill like maintenance you should have the video running. I think I will share your channel with some Russia guys.
@markgalicic77883 жыл бұрын
thanks.
@minbannister36252 жыл бұрын
Can we see the edger closer to the blades to understand how it works?
@denisjl1002 ай бұрын
i love these old videos, it shows how far the boys have come.
@robertarmitage87092 жыл бұрын
yes, show us how you edge and why u do what you do on that machine, Thank you.
@stevenlucas3302 Жыл бұрын
I enjoy your videos alot would like to see you saw some osage orange
@jagdishprasadkhaitan4815 Жыл бұрын
Lovely superb Nice sawing of pine
@mrpatrickwilson13 жыл бұрын
That was a nice bunch of boards from that one log. I have watched Out of the Woods for a while now, interesting but becoming a bit commercial,of late. Any plans to cover in the edging machine? Would also be interesting to see what your neighbours do on your little industrial area.
@markgalicic77883 жыл бұрын
thanks Patrick , yes we hope to move the edger under roof .
@art1muz133 жыл бұрын
GreenLeaf TV Extremely Dangerous Sawing Logs Into Lumber In Water Mill | Oak Tree. I WENT TO FRIKNJEEP, ENJOYED IT MUCH. I SUBED....... HERE'S ONE FOR YOU "GreenLeafTV". LET US KNOW WHAT YOU THINK.
@markgalicic77883 жыл бұрын
I will look it up.
@jagdishprasadkhaitan4815 Жыл бұрын
Lovely superb Nice sawing
@mopacrailfan3 жыл бұрын
Thanks for giving the Shout Out to Nathan @ OTW... He is Unique ;-)
@markgalicic77883 жыл бұрын
yes sir.
@deaddadd3 жыл бұрын
Mark, check out BOCAH MBLAKRAK CHANNEL if you haven't already... These guys work way too hard with manual equipment.
@markgalicic77883 жыл бұрын
I will.
@henryknight7876 Жыл бұрын
John can out work 2 men any day working fool
@marfbarf13 жыл бұрын
Can y'all show how the edger is set up?
@Kmecha843 жыл бұрын
Out of curiosity if you wanted 22" why not add an inch plus blade thickness for each pass and start there after you turn it? Say blade was 1/4" and you wanted final 22", 23 1/4, 24 1/2" and you'd never have a thick slab that way. I dunno maybe my thinking is wrong here?
@markgalicic77883 жыл бұрын
22 inches is the maximum height that the saw will cut.
@davidmackenzie5403 Жыл бұрын
The old guy would say now we are in the money cut
@MrPossumeyes3 жыл бұрын
Mark, I hope you feed Eddie plenty of red meat sammidges! And they need to be bear meat! Eddie should be fed bears. You sit on your bum. Eddie needs to be fed bears! Thanks for posting, you two guys ..love this channel ...make no mistake!.... But! Eddie! Needs To! Be! Eating! And bears would be good for him! .
@markgalicic77883 жыл бұрын
thanks.
@alphahr3 жыл бұрын
So sad to hear about Mr McCoy. What a story teller
@kevintreadway59633 жыл бұрын
Nice cutting Mark. I have some 30” pine I’m working on now.
@markgalicic77883 жыл бұрын
thanks Kevin , a 30" is a nice log.
@oldtruckguy25633 жыл бұрын
Great video. I love watching you saw the big pine!!
@markgalicic77883 жыл бұрын
thanks.
@georgeschautard46923 жыл бұрын
BLABLABLABLA ..... il est bavard ce scieur !.........
@Carl09of093 жыл бұрын
That was a huge log sounded like the ole bus motor bogged down a little, OTW Is a great sawyer love his videos!
@markgalicic77883 жыл бұрын
yes it boggs down.
@douglaslemeresr19843 жыл бұрын
If you ever need to measure something , you can use the license plate off your car/truck ! The plate is 12 inches long and 6 inches wide , so you always have a way to measure things !Might not hang on Eddies belt that well though !!
@markgalicic77883 жыл бұрын
thanks!
@jamesshanks26143 жыл бұрын
If I recall correctly the Kings inspectors would ride around and when they found a kings pine tree they would mark it with three marks * * * In the shape above the inspectors would mark the tree whether it was public land or private property mattered not it was Kings property. This was another reason that led to the American Revolution as when the British High Command heard about the American Revolution they laughed and thought it would be good training for their troops. Of course they never expected us to last and actually form an Army. One item the British officers complained mightily about was the targeting of British Officers. It wasn't considered good form to shoot them, the British Officers forgot one thing. We were at war.
@markgalicic77883 жыл бұрын
thanks for the info.
@danielebrparish42713 жыл бұрын
There would be less work for you if you turned your rip saw 180 degrees and kept the useable wood off of the ground because it has to be lifted off the ground to be fed into a rip saw after which it is put back on the ground to be stacked. Hopefully the forklift is used to move the stack onto the customer's or a delivery truck. Instead, the scrap pieces should move forward on the rollers where they can drop into a container that could be handled by a forklift. The useable boards should slide off of the mill rollers and onto a table to reduce the amount of bending down motions. Ed has to lift the board off of the mill rollers, turn around and bend down to put them on the ground where later, you have to bend down to lift them up again to put them on the rollers for the rip saw, after which they are once again carried back towards the front of the mill to be stacked. It would save a lot of back strain if the boards came off the mill then are fed back towards the front of the mill as they go through the rip saw. With just a little change in your setup the boards could fall onto the stack without having to be carried at all. Raw materials and finished products should always travel in one direction only. Just like a car factory or fast food restaurant. Next time you get a burger at a fast food place look at their setup. The delivery truck unloads in the back of the building where the freezer is located. The food then moves forward to the grill. After grilling it moves forward to the prep/assembly area. After all the ingredients are assembled it moves forward to where the wrappers are. After they are wrapped they are put on a slide where they slide forward to where the bags are. After being bagged they move forward to the service counter where the customers are. Wasted motion increases the chances of damaged goods and injured people because all that walking back and forth and bending up and down greatly increases the chances of injury because anytime one of you takes a step or has to step over something while carrying a board brings you closer to a possible trip and fall. Working smart is always more profitable than working hard. Thank you for the video and thank you for wearing hearing protection and gloves.
@markgalicic77883 жыл бұрын
yes in a large operation.
@arkansasshelli3 жыл бұрын
The Pooles are my parents! 😀 I don't have a favorite saw like them. 🤷♀️
@markgalicic77883 жыл бұрын
Hi Shelli , great parents!
@michaelyoung35253 жыл бұрын
That was a nice white pine. You got some very nice boards out of it.
@markgalicic77883 жыл бұрын
thanks.
@BigJoethib3 жыл бұрын
hey mark i dont know if this question has ever been asked your way, but here goes... what is eddies purpose at the mill is he just labor? does he own any part of the mill an any business you both do?, are you both equals or is he a subordnant? just curious!... love your channel an the fun stuff you guys do
@markgalicic77883 жыл бұрын
That's a great question Eddie and I have been sawing for 28 years together and we are 50/50 partners in this business.
@dannyfoshee22923 жыл бұрын
i just love all the different sounds.the bus engine,the saws and the sawmen.
@markgalicic77883 жыл бұрын
glad you like.
@jamesallen7123 жыл бұрын
Sorry Mark, but you are going to have to put a roof and sides around the edger to keep 'T.H.E' dry! Nice sawing the pine.
@markgalicic77883 жыл бұрын
we hope to.
@gregmercer80322 жыл бұрын
I know you don't smell nice
@rickeyburke25963 жыл бұрын
out of the woods is a good channel.
@williamconway12873 жыл бұрын
What is wrong with using the center of the log ? I have heard you mention this before and I would like to know what’s wrong with the center ? It’s for siding and it should be good enough for that .
@markgalicic77883 жыл бұрын
the center has cracks & stress in it.
@mikefournier26013 жыл бұрын
I work in mills for 30 years all thing I can run last was a head saw an a band mill also love it
@markgalicic77883 жыл бұрын
that's great.
@user-kf5re7uq2z7 ай бұрын
maKNOTenous LOL! 😁
@johnthomsen88023 жыл бұрын
Quality video. I love this very relaxing to watch. Introduced my dad to these videos.
@markgalicic77883 жыл бұрын
thanks , glad you like.
@ralphnorman46363 жыл бұрын
Love watching your chanel. Dont understand why not more subscribers
@michaelohalloran73813 жыл бұрын
Perhaps some clickbait? The occasional girl in a bikini helping offbear would increase viewership. Nothing too skimpy-don’t want Eddie losing his concentration.
@ralphnorman46363 жыл бұрын
@@michaelohalloran7381 HORRIBLE image of eddie in a bakini. SHUDDER. i know that is not what you ment but SHUDDER
@thewiremanbig3 жыл бұрын
@@ralphnorman4636 Bahahahahahahahahahaha
@billmorris26133 жыл бұрын
Good morning from St John Parish, Louisiana 07 Nov 20.
@markgalicic77883 жыл бұрын
Morning!
@fricknjeep3 жыл бұрын
hi there thanks for the shout out . Got a few more boards up today after the wind passed .Those logs to boards are 15 feet long . Like the coffee next to the burn barrel . This care john
@markgalicic77883 жыл бұрын
hope more people watch your videos , they show how a manual mill runs . "great work" hope to see the #1 mill up & running soon.
@geraldstahlman70365 ай бұрын
mo KNOT inous!
@James-vd8kp6 ай бұрын
Love your videos. I sawed in a mill in Maine brings back memories thanks
@engkuskusnadi1827 Жыл бұрын
I like to see the sawmill even when I was a child and you have a very good teamwork. Keep it up Mark. Bravo👍🏻
@davidgordy12 жыл бұрын
Being From Florida I Love the White Pine! Beautiful!😉
@jimp.45313 жыл бұрын
great looking ol' pine
@markgalicic77883 жыл бұрын
thanks.
@larrycounce45093 жыл бұрын
I saw the other day a video that Chad put out of him figuring the mill controls and mother was right there with him, R.I.P Mike
@grazynazambeanie59632 жыл бұрын
I've never understood this 3/4 of a turn anti clockwise vs 1/4of a turn clockwise. 45years in mills and have always seen the Sawyer take the 1/4 clockwise unless there was some defect in the log . It's faster and no damage to the log faces
@markgalicic77882 жыл бұрын
my log turner dose not turn clockwise.
@grazynazambeanie59632 жыл бұрын
@@markgalicic7788 that's why they put kickers on the carriage that flip the log 1/4 turn clockwise then reload the log with the push arms . Love the pine , it just feels good to the touch when freshly sawn
@prestonmiller95522 жыл бұрын
You could save Eddie a lot of steps by adding some more roller racks in several key locations. We were amazed at how much we streamlined our operations with these roller racks.
@johneverley60973 жыл бұрын
yes more edgger
@rodkirt92732 жыл бұрын
Edger good !
@wazzazone2 жыл бұрын
Watching these videos from the start again. Thanks Mark and Eddie.
@dennislutz84973 жыл бұрын
I see 3 license plates up on your all that appear to be ham radio call sign plates, wd4dc , ka4pub and ka2mpy