nick_danger's Guide to Installing LED Halos in 300C v.1.0

[@DragonKnight_YT]

What is the halo light measurements for the headlights on this 2006 300c I'm trying to custom make my own set

[@k.a.d.msrt8326]

@nick danger so using the yellow wire only runs when ur running the interior lights? What if I want them to work with the day time running lights or amber lights?

[@famoso1418]

How do I get sizes of rings so I can buy before project they have diffrent sizes on ebay

[@arturo123G]

Where you bought them led halo rings ?

[@khorrocks4]

hey am doing this to mine...i saw you drill hole for wires but how did you get the rings to stay where you want them???

[@dpenguin8r]

wow that is nice. better looking and cheaper im assuming than buying angle eye headlights online. couple of questions though? will hid installed in the headlight melt or cause problems for the rings? and not so sure how u did the wiring? how do they turn on and off? keep up the good work very impressive. three thumbs up lol

[@titan371]

nice job man but if i have HID on the fogs do u think it will get melted do to the heat of the lights????

[@MrMeSoMAD]

What's the yellow wire with the white stripe?

[@LaXa555]

I opened my headlights today, Im about to paint my housing black, would you recommand to install the halos before painting and masking the halos like you did ?

[@upstreammiami]

hey i just ordered mines.. do u have to drill those holes for the cables cuz on aac video they dont drill nothing ????

[@dejuan71]

Did you sand the headlights at all when you painted them and what paint did you use?

[@mitruxx]

have you had any problems over time with the lights fading out, or getting water in them, or anything like that?

[@chrisabbott5670]

i have 140 mm for high beams ...are the low beams 160mm?

[@gudmagik]

where did you get the led rings from?

[@shaunzatloukal741]

what type and size of halo rings did you use for the headlights/fog lights?? NICE WORK!

[@SuperiorRBX]

If I may ask where did you get that black grille from?

[@LatinJoker718]

Wat did you use to seal the headlight and the fog lights????

[@norbertgierasimiuk832]

Hi Nick you can give me sizes of the LED rings for lights and halos ( fog lights ) and where I can buy them. Thanks

[@ashleyf.1661]

There is a website called Oracle halos that you can just look up, type in the year, make, and model of the car and it tells you if they have those halos for your particular car. You pick your color and everything, add fog lights, etc. It costed about $300 for my headlight and fog light halogens kit. good luck.

[@therealnickdanger]

I wish I could, but I sold this car about 4 years ago. At the time, there was only one size available through AAC Style - link in the description.

[@SuperBossboy]

wow bro u did i good job i like it very much . but question how do i get the lights to work after installing them that ma only pro rite now

[@kk4299]

man i dont know how to do mine. i dont know how to back the lights? should i use my home oven? i know it sounds stupid but i have no idea.. where you from?

[@daspidermc]

what type of silicone did you use?

[@kk4299]

did you get yours done?

[@3DEMENTES]

hey bro how much did you paid for the rings?

[@wafflestomper5206]

most states it is illegal to have red lights on the front of your vehicle

[@jeffunderwood4393]

Bruce T: thats why they're not for road use, they're all for show and accenting areas

[@therealnickdanger]

It's illegal here as well, but only while driving on public roads.

[@nuggblazer]

This vid kicks ass -- I'm not even into modding cars and I liked it!

[@upstreammiami]

on mines you have to drill the holes where the ring ends on top...; you didn't do that you drilled the holes in the ring

[@TimR.VetGolf]

Sure did...came out awesome.

[@rakkasan611]

get plasmaglow night eye and it will go much faster and easier no bakeing or takeing the head lights out

[@is300soon]

take wd40 on a rag and wipe the leds only, paint over it and let it dry. Then take blue painters tape and just dab the leds, the paint will pop right off. Also if your doing a DIY make sure the info you provide is right. OEM glue is great and should be left on the light, taking it off and using silicone is WRONG.

[@Hodgson316]

very nice writeup! i don't even have a 300 and i watched the whole thing, lol

[@evil1640evil]

Looking Great My Friend !!

[@dmoua08]

instead of baking...you could use a heat gun...

[@sox300c]

awesome work......awesome video.....awesome halos......great!!!!

[@minimainiac1969]

Nice to see such tidy wiring. I hope you fitted a fuse in it. lmao

[@wiseguyrahul007]

nice vid man

[@ayrtonlegalize]

good work

[@TimR.VetGolf]

Thanks,...I figured it out 3 weeks ago. ;)

[@stevenw354]

you put in some work

[@tiooinana]

DANGER. L'émission de lumière rouge vers l'avant est interdite. Risque de confusion sur le sens de circulation du véhicule. modification de la voiture donc plus homologuée et problème d'assurance et de justice.

[@wiseguyrahul007]

@therealnickdanger .......lol

[@SuperBossboy]

wow bro u did i good job i like it very much . but question how do i get the lights to work after installing them that ma only prob rite now