This is for a ram 1500 but should carry over to other cars.
Пікірлер: 101
@MRPREZ6 жыл бұрын
It’s sad that your video isn’t “professionally done” but your explanation was, by far, one of the BEST!! THANK YOU 🙌🏽
@mattaloo16 жыл бұрын
Dude thanks for the video you made way more sense than sypder video their video had me all nervous and confused
@markusmcschallenburger41513 жыл бұрын
this video is WAY better than the one that came with my SPEC-D halo's I just got. THANK YOU!!
@officialyungtwizted38582 жыл бұрын
Dude I got some halo lights as well for my 2001 Honda Accord and I can’t get the rings to turn on so I just connected harness to harness. All the black cables and white cables are just freely.
@Dan-hv7bh6 жыл бұрын
Jacob, I appreciate your response. Your video got me to a place where I was able figure out the install. I ended up running off the “Parking Light” fuse. Finished it up tonight and they work great! Thanks!
@kenmar543 жыл бұрын
Thank you for this video. All the other videos are just frustrating with lack of important information. You have the nack for explaining things. I subscribed brother, thanks again.
@DeeGSXR6 жыл бұрын
Great video and great tips. I received my new Angel Eyes headlight sets today (with no instructions at all) and I wasn't sure why x3 red and x3 black fine wires are hanging out of the back of each headlight (in addition to the main wiring plug with pins). I've now spliced the fine wires together as two separate groups (all reds, and all blacks), with on red end sticking out and one black end - as per your advice. I plan to continue the project tomorrow, and I believe I just have to source the positive and the negative connections on the parking light connection, by using a multimeter tool. Fingers crossed it all goes well. Thanks for sharing your cool video bud.
@zebstrock9785 жыл бұрын
I also have 3 red and 3 black did u connect all alike colors??
@Troysadventure_s Жыл бұрын
@@zebstrock978 I have the same question did you ever figure it out ??
@VonGotSauceАй бұрын
I have three white and three black did this work
@arlettafreeze80816 жыл бұрын
Thank you! Husband was able to install his Halo lights with no problem after watching your video.
@1JayTheJet4 жыл бұрын
Thanks for the video... Wish you did part 2 but I figured it out. I have one high beam out but I don't give a damn right now about that. I'm happy I pulled this shit off 😂😂😂 my ride look super 🔥
@buffchipz75233 жыл бұрын
2:20 mlk aint die for this 😂😂😂
@tomcole4736 Жыл бұрын
these connectors are made to cut through the wire jacket, they are designed to keep the jacket on so they will self center in the connector. take your pliers and squeeze down on the metal crimp before you close the snap ring. Also a little dielectric grease would not hurt either
@EpicMel0ns3 жыл бұрын
Please man do you have a follow up video?
@sggaruda6 жыл бұрын
Video ended before you got to the car to connect, but I'm guessing from there, it's just connecting to a power source for the DRL halos? My E85 has a large connector with everything coming to one point that plugs in the car. the Spyder headlights show the White and black LED lead wire already connected to the large connector, so I'm guessing that's the power source and i just piggy back the halo's off of that and connect it for the DRL's? Spyder's video is extremely vague and useless and does not help and their tech support isn't much help either.
@itsok8656 жыл бұрын
Where is part 2?
@Repla124812 жыл бұрын
Part 2 never came out? Lol
@jr758482 жыл бұрын
Jacob, so what's the final install look like cuz I'll be doing my Spyder headlights on my truck but not sure where everything will be connected? Could you reply please.... 😭
@dawsonleech84284 жыл бұрын
Thank you this is so much better than the other video 🙏
@normanrexford49495 жыл бұрын
so when you go to connect them to the truck where do i need to connect the rings and LEDs on the bottom
@frehleycomet6 жыл бұрын
I got some halos for my Slingshot. There are 4 headlights and I have 4 halo rings. Can I connect each ring to each headlight or do they have to all get piggy back and then connect all to one headlight.
@Mustangladyme8 ай бұрын
I take electrical tape and wrap it around the those snap on connectors for wires. Why? Because I had some unclick. Some are cheaper quality too. Also you think it cut into the wire to make contact and then you close it. Nope. That happened to mu radio years ago.
@jasonenglish43544 жыл бұрын
Soldier and industrial shrink tube with the heat activated glue is a far better connection than the piggy back connectors. Your wire is going to corrode using those connectors
@coltonwalker96165 жыл бұрын
Thank you I was struggling
@paulsawka60026 жыл бұрын
Great video, just a question though how would I wire my halo rings in my fog light to my parking lights. Any info would be greatly appreciated thank you
@evanodder69485 жыл бұрын
Seal those with silicone goop or don't count on it lasting more than a few years once rain and salt gets in
@rolandorodriguez2235 ай бұрын
Where's the other half of the video? How to connect to the headlights wire.
@mountaineer5217 ай бұрын
What if you do put the white and red together 😳
@rodrigodejesus65193 жыл бұрын
I bought new head lights for my 1990 bronco and it just has white and black wire. My question is , where do I connect this wire to?
@srthooligan6 жыл бұрын
Is a part 2 ...
@NRB_75Ай бұрын
What if you don't have a white wire
@Dan-hv7bh6 жыл бұрын
Hey Jacob, in the video you said you were going to show how to install the headlights in the truck. Is there another video for that?
@GambisRestorations6 жыл бұрын
Dan Johnson it got flagged not sure why
@fruitp1443 жыл бұрын
Do u have to order the quick connectors separately
@JamesRazorbacks Жыл бұрын
Buy em at any parts store
@diegonavarro13095 жыл бұрын
Awesome!! It makes sense now. Could you show how to connect it to the truck? I meant the wires...
@michaelrodgers56544 жыл бұрын
How would you connect Halo Fog lights to the parking light? just two wires coming out the back (red and black).
@mohamadervin83133 жыл бұрын
That is how mine is im putting halos on my 07 dodge nitro & they have a red & blk wire poking out of both were in da hell do I hook them up to? He had a whole bunch of $hit going on...
@johnduzan84993 жыл бұрын
Good vid. Tip for you; use linemans pliers to secure the piggy backs. They're stronger and have a larger surface.
@chiptaylor26134 жыл бұрын
How about a video on how to hot wire the halo on a 2014 st glide.
@TommieGun713 жыл бұрын
where do the red wires connect to?
@rodriguez6576 жыл бұрын
nice i got some halos for my o4 ram today i got 2black wires. 1red. 1white but my question is can they be wire as daytime lights and how can you do that thanks in advance
@craigardel39353 жыл бұрын
Using the "guillotine" connectors is a cheap, sloppy way to make said connections. Stripping the common wires and twisting them together, then using a spade male/female connector to mount 1 main wire to the main connection is a much more solid way to accomplish the goal. Many connections create several weak spots vice one connection being stronger and more stable.
@stevenmoore33813 жыл бұрын
If you're using those crimp terminals how do you connect them to the park light from the bulb harness? I feel like you wouldn't want to cut the wire from the bulb harness to use the other end of the terminal. I honestly don't know, but I just got my lights delivered and want to do a good job on the install.
@michaeldoneghy6 жыл бұрын
Hey buddy great video, but I got a quick question! Other video's keep talking about a CCFL connecter which I don't think I need for my Spyder headlights. Is it necessary for me to have it? I have hooked up my LEDs to my running lights but need to hook up my halos is that what the ccfl would be for? P.S., I don't really know shit about wiring I just learn on the fly.
@GambisRestorations6 жыл бұрын
CCFL as I know is a type of light. Such as LED. On this application my halos are are CCFL. Not sure what kind of connector they are talk about but if you use the piggy back method you won’t need anything else. If this doesn’t answer your question let me know. Thanks!!
@joepadilla7871 Жыл бұрын
How do you call those blue connectors and where do I can find them?
@mckinleysmith074 жыл бұрын
Is this the same set up for the headlights from my car. I have a 2004 mercedes e500 and the harness for my headlights are 4 pin plugs. The headlights that ordered have a 5 pin plug and won't fit with the harness from my car. Any suggestions
@ctc-ml2ry2 жыл бұрын
Is there anyway that u can send me the second part of the vid possibly?
@isaactormenta2 жыл бұрын
Where did u plug in the white and red wires??
@monvalleytruth51113 жыл бұрын
Do I need a step down transformer or anything like that
@nathanharshbarger92224 жыл бұрын
Thank You!
@rickybritish Жыл бұрын
Can I connect 2 halo to one driver??
@officialyungtwizted38582 жыл бұрын
Can you video chat me and show me 😭😭I just got some for my Honda Accord 2001 and it’s such a pain so many cords. 6 cords total
@chrisfebonio75534 ай бұрын
yeah wheere do we wire those into nowe on the veehicle?
@NM-tl6pe6 жыл бұрын
Thank You!
@dylanboldt13684 жыл бұрын
Can the red and white wires be wired together
@jaydiaz61737 жыл бұрын
2010 jeep jk . I'm trying to connect a halo led to the side lights. They have a red and yellow coming out of the halo led. Which colors do I attach this to on side market which I believe is black and white
@GambisRestorations7 жыл бұрын
Jay Diaz I'm going to guess the yellow is the ground but I would check with a voltmeter or a wire diagram for your vehicle.
@kencoulter87944 жыл бұрын
But will when engine off
@rajgill75764 жыл бұрын
Thanks dude I thought I was fucked
@mohamadervin83133 жыл бұрын
Is it the same for dodge nitros?
@RobPGamerVaper6 жыл бұрын
Hey I got a pair of these for my Chrysler 300m and my cars Blinkers are on the bumper side markers which is obviously where my DRL is so I'll be connecting the Halos to that but the New lights have 3 little LEDs Can I connect them to the blinker ? So to have a Blinker in the Headlights?
@GambisRestorations6 жыл бұрын
In theory yes. I have never done it that way but as far as I know it should work..
@jayde49824 жыл бұрын
Mine are wired so if I turn my light switch to the middle the halo lights and fog lights turn on and when i turn switch all the way all lights turn on.. how can I make it only halo lights without fog lights turn on when switching to middle light on switch.. by the way its the same truck 04 dodge ram 1500
@wileycoyote31894 жыл бұрын
You would have to wire it to the middle wire on your headlights ASSUMING from your turn signal light, the middle one is your parking lights
@mickeydavenport2064 жыл бұрын
Where’d you go? Did you get locked 🔒 up :c
@donaldmitchell77383 жыл бұрын
I did all of this and my LED and Halo’s still don’t work what did I do wrong please help
@joinnn23443 жыл бұрын
Wtf do I connect the last wires to 😂
@1512dep4 жыл бұрын
what do you do with the white wire?!
@lyricderbin11696 жыл бұрын
I only have one black wire which is three spliced into one for the lower LEDs and in another separate spot there is two spots where only a red and white wire comes out but no black?
@GambisRestorations6 жыл бұрын
Lyric Derbin Your set may be different than mine. Just remember you need ground and power. You will need to figure out which is which.
@lyricderbin11696 жыл бұрын
Jacob Gambrel I got it figured out, thanks!
@kurtisallen18516 жыл бұрын
What if your light just came with the red and black wire? Mine doesn't have the thick white or black wire.
@GambisRestorations6 жыл бұрын
Then all you have is power and a ground.
@turbobeast31412 жыл бұрын
Where is the car video?
@kencoulter87944 жыл бұрын
Hey my head light wont come on when engine running help
@JoseRamirez-pf1cj Жыл бұрын
Mine doesnt have red wires
@williamhaskins13654 жыл бұрын
Where's part 2 ???
@keeweesincemcmxc76296 жыл бұрын
can I put the red and white wire on the parking light line?
@GambisRestorations6 жыл бұрын
You can just in different spots. You don't want to piggy back the reds with the whites.
@corbinw38835 жыл бұрын
@@GambisRestorations why though
@jascam12 жыл бұрын
So basically you showed how to crimp wires.
@Subzero07533 жыл бұрын
So what happen now 🤔
@dragonslayer95473 жыл бұрын
So this is halo where's the mods elites Spartans grunts 😂😂😂😂😂😂
@bohannon51673 жыл бұрын
THANK YOU SO MUCH!! 800$ headlights and the directions are junk.
@kencoulter87944 жыл бұрын
Help
@80sbaybii6 жыл бұрын
acob Gambrel bro you make no sence. Yes you can connect red and white wires it's okay its power/ positive wires. Black with black ground wires. So on your headlights you have your turning signal. Pick what style you want your halo lights to show, like have the L.E.DS stay on with ur halo lights or they can come on when you turn your signal on. Easy to set up. Message me if anyone needs help. This dude has no clue
@teeboy55835 жыл бұрын
How do i wire them to stay on when driving
@bigkevdaboss87945 жыл бұрын
Email me bro... gotta 95 accord
@samjones48125 жыл бұрын
Do you have a video on how to setup the led lights, I have a 2010 Ford fusion and my lights came with the black and white wire Thanks, Sam