Mobula 7 - Deep Dive - 2s Fast!!

[@NickBurnsFPV]

I see the 2sec gap in the quick roll. Source checked out. After two uploads I decided to go ahead a publish. What you do you think. Time to buy one...and which one?

[@NickBurnsFPV]

your building a quad garage too? Sound like your fleet is growing rapidly.

[@13aadger]

It seems harder and harder to decide what brushless whoop is the one to get. Most seem very close in performance and parts used :/

[@NickBurnsFPV]

while not in the car racing circle I understand what your saying. I would like to see someone race the x140 against larger quads just to see how it does.

[@Tump2010]

the 1 battery set would be the one for me as I already have lots of batteries and chargers already.

[@dragonflyfpv1679]

I bought an helifar x140 this summer too...best purchase I've ever made...I prefer it over all my other quads. Getting ready to upgrade the cam to either a RC split or caddx turtle....can't decide.

[@midnighttoreo]

you my friend is the fastest housefly ever

[@softstart100]

I concur wow

[@unnamedchannel1237]

Blow flys are faster ....

[@situbes.972]

That is some clean video hardly any static.

[@scootroter4859]

I've watched every video you've made in the last 2 years in Jan. This is without a doubt the fastest, most nimble, and maneuverable indoor quad you've ever reviewed! Incredibly impressive flying around your kitchen island! Damn! You are truly a Ninja BAT OUT OF HELL! heehee! 😜🤘 Very nicely flown and reviewed, my friend! 👍

[@NickBurnsFPV]

Thank you

[@AdnMoko]

this videos helps me push toward Mobula7 rather then others 2s whoop. Thank You Nick, this vid so help full

[@Tump2010]

they made the onboard voltage regulator work better so it can step down instead of step up, I tried the betfpv f4 1s board at 2s and the voltage regulator fried instantly and you couldn't power the board anymore, but you could power it from USB just fine. That is why I like the happy model motors, the ur65 also has the clips on both sides, the other thing I like about happy model motors is that they curve the magnets making that airgap as small and efficient as possible, the racerstar fire and green models also have the curved magnets, there is a new racerstar motor that has the c-clips on both sides with curved magnets but I didn't see any specs.

[@ColtKirwan]

what's the difference between the model that comes with red props vs the one that has black props?

[@NickBurnsFPV]

only the color of the props. Jason from HappyModel has confirmed this.

[@Gosuminer]

Awesome flying, awesome model and incredibly clean FPV feed! Thank you very much for this review. Being somewhat disappointed by my brushed whoop I was looking into brushless and 2S and I have the feeling my search has come to an end.

[@FrequentFlyerRC]

SUPER TIGHT review Nick! It's amazing that they got it to not do yaw washout without even reversing the prop direction! They need to use the hoops that Kingkong use on the ET100! Nice flying as usual 👌🏽

[@NickBurnsFPV]

Yes, I worry I haven't done just the right dive to cause it, I suspect I have between 8-15 dives none showed the washout. It stinks I lost so much footage.

[@frankbarajas]

Hey FF ~ are you considering getting one of these?

[@JeromeDemers]

That for sure beats the beta65 and beta75! Thanks for the review.

[@SteveGergetz]

Fabulous review as usual Nick. And HOLY CRAP what flying! I might be wrong, but I feel like that's the fastest I've ever seen you fly around your house.

[@MCsCreations]

Pretty nice model, Nick! Amazing flying there! 😃

[@maxiemusfpv198]

MC's Creations i sees ur comment

[@MCsCreations]

@@maxiemusfpv198 What's up, dude. 😊 Sorry for taking so long to answer... I'm traveling and here my connection is horrible! 😕

[@wesorama]

I'm liking 1s brushed quads right now for the flight time. Got a UR65 for my son test flew that and liked it. Still waiting to see how it works out for him. I'm glad to see all the constant innovation in the hobby. BTW, my cat jumps higher than I ever saw to attack my quads. I'm guessing yours gave up at some point :)

[@NickBurnsFPV]

I think he has gotten to fat to care. Or maybe he is just jaded.

[@Facewizard13]

I've been thoroughly enjoying watching your videos. You give such good information and most of my questions that pop up in my head are answered in the video. Honestly these mob 7's arent in stock but you provide enough information so I can just order it's parts individually! So thanks man, great job!

[@NickBurnsFPV]

Glad you enjoying the video. Thank you for the compliment.

[@DroneSkinz]

And to think that your back yard would make an awesome sim map. Your crib makes for an even nicer sim map. You're a multiple threat Nick. A complete package. Thanks for sharing. I just picked my Modula up from racedayquads can't wait to try it out.

[@NickBurnsFPV]

Thanks. Have fun, and tell my wife to stop looking at houses. :)

[@markdickson2150]

Thank you for also posting your crash footage. Helps the rest of us not feel so terrible about our flying. :)

[@engizmo]

That is a great flying quad. I think its the best 70 size I've seen flying. I'm with you on the pro version ideas... better camera 25mw is enough. Please post some more outside flying. I was thinking to get the kk 115 but I may go this one. Whats your thoughts on that?

[@NickBurnsFPV]

It really depends on where to plan to fly the most and wallet.

[@engizmo]

Forget wallet issues ;) I prefer to fly my 1s 65mm inside. So the 75 2s would be for outside playgrounds, parks, proximity and tree canopies.

[@zippycfpv3619]

Love your reviews on great new products!!! Don’t worry about the extra footage you can’t find!!!!!!! Plenty of fun times in what you’ve given us to make a choice!!! 👍🏼😎

[@stevedelp4067]

I now have two of these love them one has the v2 frame, and a runcam nano and vtx .Lost my smart audio but don't change channels much anyway,. I wanted something I could fly inside and out, this has been great!

[@TheQuadcopterReview]

I just can seem to get these things in fast enough. Mine is on the way. Looks good though. Thanks as always.

[@theromanempire9236]

You gotta powerloop the table one of these days

[@NickBurnsFPV]

I tried :(, got really close a few times but none where clean. I would prefer the floors get finished so we can get our furniture back.

[@NickBurnsFPV]

yep, still no furniture. Its getting old waiting foe the floors to be ready. We are hopeful work will get started this week.

[@windrider23]

I look forward to the FC to be available. I would use it on a 65mm 2s whoop.

[@NickBurnsFPV]

I wonder if they have a 65mm planned. No comment from happymodel on that topic.

[@waynesrcspin4827]

Wow...just wow, Nick that would have to be close if not the fastest I've ever seen you fly around your house. Great video mate and absolutely epic flying, top job and a very informative review.

[@NickBurnsFPV]

Thank you. I appreciate it.

[@RonaldBrown59]

I like the Mobula 7, it seems like a great option for FPV flying, indoor or out. Thanks for sharing with us.

[@Rich-TeaFPV]

Wow that was some skilful flying 👍😀 great review Nick

[@SteveO4478]

Looks like a winner! I might pull the trigger on this small one and I like the sleek design!

[@davehayes5766]

Great flights and review as always! Mobula7 ordered👍

[@owlzeyesfpv1915]

@Nick Burns, IMO I think you are one of best indoor Micro Flyers! Specially with the higher speeds and cornering you do! Just awesome!

[@NickBurnsFPV]

Thank you

[@adeburnham419]

So I'm assuming as it has an adjustable camera angle it's not too powerful indoors as you can lower the camera angle so you can fly gently around or up the angle to rip around like you....... unlike the beta 65x and 75x which are too powerful as the camera angle it's fixed at quite a high angle so it's difficult to fly slowly ?

[@NickBurnsFPV]

I feel strongly adjustable camera angle makes quads more friendly to a wider audience.

[@adeburnham419]

@@NickBurnsFPV I think this is the one I'm looking for........I build all my own quads I have 2 2inchers and 2 five inchers but the problem is I live in the UK so my Taranis x9d se is EU software which means it's awkward now buying a ready built quad with non EU software which the Eachine UK65 or the beta 65x or the snapper 7 I was looking at all have whereas the Mobula 7 comes with the option of EU software plus it's 2s and has the adjustable camera angle so it's capable of indoor or outdoor flying depending on the camera angle you set........I'm just waiting now for Bangood to get them in stock so thanks for sharing your thoughts on this as it's now made my mind up this is the one !!

[@NickBurnsFPV]

There is a EU-LBT Frsky version that can be selected on the banggood page. Not in stock yet. I have a link in the description to the product page.

[@dakzer55]

Hi Nick, great review of the mobula7. I just got this as from a friend, and surprised how good it is. I am a beginner, and trying to fly in my home, but find acro very hard. What type of rates or pids are typically used for small space indoor flying? I suspect it is that I am a noob, but I cannot tell from your many videos if you fly acro or angle mode as you fly extremely fast 😁

[@unnamedchannel1237]

I just came here to say I smashed up my Mobula 7 the canopy still on v1 frame and I have had heaps of crashes. Whipped out my leader 3se after about a month or 2 of not flying it cause i had the mobula. Have to say Mobula way more fun than my leader 3se.

[@gonebdg]

Woooow ... very good whoop, thanks for the vid. Nick! Which you think is better betafpv 7 2s or this?

[@NickBurnsFPV]

this

[@gonebdg]

Roger that ... And i want one! How about fly in level mode with slow movement, is mobula7 can fly smoothly? And how about the motor durability? With 0603 motor (i had Uruav ur 65 and US65), i felt the motor are not durable after several crash, it start producing anoying vibration and oscillation even after changing the frame, propeller and readjust the pid.

[@NickBurnsFPV]

I didn't test angle mode, but I can. I wrecked this a lot, no issues with vibrations or anything.

[@markarch3137]

Great flying! It looks like you spent all of your money on the quads and not anything left for furniture! Love the wide open space thought to rip through.

[@NickBurnsFPV]

the next indoor quad will have to combat the furniture as its all back now.

[@FlyingFun.]

Nice review as always Nick. Should'get mine soon, I can get the washout on the beta65x if I try so know how to make it happen, will get this. Seems a really good deal this one, shame the frame is a bit brittle , maybe that is the main thing they need to look into fixing?

[@dakzer55]

Hi Nick, Great flying as usual 🙌. Very fast. Do you have props idling at a certain rpm when engaged and ready to fly?

[@NickBurnsFPV]

No, the air mode, which on arm without throttle, starts the props at the betaflight default rpm.

[@dakzer55]

@@NickBurnsFPV Thank you that has helped stabilise the firefly 1s nano baby in the wind.

[@leandronascimento6703]

hello friend Well, my name is Leandro and I live here in Brazil, I bought a mobula 7 and I can not connect it to the ev900 glasses. I've already been informed that I will have to change his vtx. Can you tell me what to do and how to do it ?. I'm new to the hobby and I'm totally lost. Thank you very much and big hug.

[@NickBurnsFPV]

with the mobula powered on and goggles on, use the auto scan. I believe we have to hold the far left button down for a bit. If it stops and doesn't find the frequency, press hold and release again.

[@eddyfpv652]

Awesome flying keep up the great work you do for the community

[@NickBurnsFPV]

Will do!

[@Ch1ck3n_L0rd]

so.. in my excitement of this whoop, and seeing it all sold out already.. I found one on amazon and bought it immediately, however.. i think it is a flysky one and i need frsky. can i put my own nano frsky or nano crossfire receiver on it??

[@HDgodfrey]

First time I've seen one of your vids. You have just earned a new subscriber. Very well presented!

[@NickBurnsFPV]

Thank you. And welcome to this little corner of the internet. :)

[@johncarold]

Hay Nick, Great Video, thanks for the information on the Mobula, I just started flying my beta65s and I can't wait to get this one. Looks like a blast to Fly. JohnnyDRC

[@icantflyfpv4835]

The standard version is worth the charger. This is probably going to be quad of the year. What conneter is the vtx antenna? I flew outside with this machine and since winter is here, this is the easiest $100 you could spend.

[@NickBurnsFPV]

the vtx is soldered to the camera via pins. The antenna is soldered to the vtx, is all one unit.

[@bblover4ever1984]

Thats some nice flying buds keep up the wicked work.

[@hambone4779]

I hope the canopy is available soon, I've been using the boldclash canopy but it's heavy and has no camera adjustment

[@NickBurnsFPV]

I am with you. They sent me spare parts but no canopy :(

[@pixxel8637]

Thanks for your reviews, and awesome flying :o Phew, so I want to buy my first quad/whoop, I could buy the Mobula7 or Tinyhawk 2, both used. They are both good and have roughly the same use cases right? What's the differences? Also I could get the Mobula7 with a lot of extra props, motor, housing,13 1s/4 2s batteries, chargers, a stronger vtx for 150€ or the Tinyhawk 2 with basically the original extras (a few batteries, charger, case, extra canopy) for 120€. What's the better deal? Can't decide😅

[@NickBurnsFPV]

The mobula7 was very good at the time. Since its launch the camera, vtx and aio board have all gotten much better. If those are the choices I suggest the tinyhawk

[@pixxel8637]

@@NickBurnsFPV aww that's too late, my Mobula7 is arriving today.

[@toddspeck9415]

Awesome flying! Super impressive.

[@fpv10]

Mobula 7 beta75x gt7.... Which will best? I heard beta75x has many wash out. Is there washout on mobula?

[@NickBurnsFPV]

I suggest this video kzbin.info/www/bejne/j2iQl4OHg5qqsJI contains much more than I could type here.

[@laughingwar3063]

Nick. With the way you race around the house makes me wonder if you created a throttle curve. Did you?

[@NickBurnsFPV]

No. I have tried throttle curve, lower rates and expo. They all make me fly worse. I also use a frsky xlite radio which has smaller "throws" on the sticks.

[@bongofury3176]

Man that is some serious ripping. I have motion sickness from watching. Best of all is your un-fussed cat. Happy flying

[@NickBurnsFPV]

Thanks.

[@asian_raisin]

Not sure if this works or not but try turning off and on air braking in blheli suite for that yaw washout. I'm curious to see what it does on the tiny whoops.

[@NickBurnsFPV]

I don't find the mobula7 has washout? I have found other frames with mobula7 components do have washout.

[@jandomingo9806]

Convert to xt30 and use a real 2s lipo?

[@icantflyfpv4835]

Or reuse existing 1s 250-300

[@fpvlive]

That's one hell of a little machine. I assume the FrSky version comes with FCC firmware. Is it possible to flash eu lbt firmware ?

[@NickBurnsFPV]

I can't say for certain, but I will ask.

[@Itzzmariah6]

They sell a eu lbt version

[@fpvlive]

Just checked it and you are right about it. Thanks !

[@FlyingFun.]

I think the EU version comes with a xm reciever.

[@thomastt3805]

Hi Nick, is it possible to do a thrust test? I would have to know how much weight the quad can lift for a camera project. greetings!

[@NickBurnsFPV]

Sorry, I don't have thrust stand to test on. :(

[@HeathNielsen]

Would love to buy a Nick Burns quad or kit with all of your favorite parts. Do worry about the price. I just want something great and reliable. Thanks as always.

[@Mushroom-Motivation]

Nice house 👍 your very good at flying that thing, I’ve got one on the way 😀 if I’m half as good as you at half the speed it’s going to be lots of fun. Thanks for awesome demo.

[@NickBurnsFPV]

Thanks. Have fun is the main point of this hobby.

[@ChrisM-yr5tt]

How windy was it when you were flying? Finally got mine, Cant wait to fly it. 15-20 mph winds going to wait a couple of days grrr.

[@NickBurnsFPV]

I can't say how windy it was but in general we need it to be pretty calm, less than 10mph, higher wind increases the challenge if that is something we are looking for :)

[@Spideystrat]

Does it have real brushless motors with BALL BEARINGS in like the Tiny hawk or just bushings ?

[@NickBurnsFPV]

no bushings in these. The tiny hawk is the only one with bearings in the motors.

[@Spideystrat]

well 99% of todays cars have bushings in the crank shafts so i imagine they'll be fine @@NickBurnsFPV

[@thijss1272]

not sure what whoop to get right now. i have a brushed whoop but i'am not sure if i should get a 1s brushless whoop or a 2s whoop, would like to fly outdoors aswell. 1s brushless whoops are way cheap so haha

[@NickBurnsFPV]

I think this is more versatile than 1s brushless whoops.

[@FPVrare]

hi #Nick Burn does the motor connector on FC is jst 1.25mm? am i correct thank you.

[@NickBurnsFPV]

I believe so 3pin connector

[@Danegerous45]

you da man Mr Burns! thanks for sharing the PIDs, i can tweak mine a little. Are you having any black spots in your camera? motors coming down a little warmer than they should in stock BF 4.0?

[@NickBurnsFPV]

No my motors have been cool to warmish. Do the motors spin pretty free? Any hairs or debris? Also check to ensure the connector, does it get hot as well? If so I would switch it out for another solid pin connector like from tinywhoop.com

[@Danegerous45]

@@NickBurnsFPV negative on both counts. Free of debris or anything around motors or shaft. Connector is nice and cool, no heat from it. The motors aren't crazy hit, but a lot warmer than I'm used to. Your PIDs in the video, are they stock BF 4.0?

[@NickBurnsFPV]

No stock 3.5.

[@Danegerous45]

@@NickBurnsFPV any reason you haven't upgraded to BF 4.0? I'm curious if yours get warmer on 4.0

[@NickBurnsFPV]

I have three, my original from oct is 3.5. Newer ones on BF4. When I have a quad running like I want it to run I don't flash it, I don't want to go back and re-tune.

[@valentinguz]

Great video! I wonder if someone knows where I could buy that camera cover canopy, the snapper 7 one always breaks

[@NickBurnsFPV]

Thanks. I am not sure we can get the canopy yet.

[@BrigzyFPV]

Sorry, I see, you use 2x 1S, missed that 1st time. Amazon seem to have the Whoop and the Batts now.

[@grahamjw75]

This almost seemed a little quicker than the BetaFPV 75x maybe? Kinda wish I would have known about this one before I ordered the 75x

[@NickBurnsFPV]

I suspect outside the beta75x has the edge in straight line speed, and a bit more low end torque as well, but not by much.

[@singerfpv9044]

Stop ! Your keep making me wanna buy things 😂

[@NickBurnsFPV]

ha, choice is good though!

[@pedropittagroz8747]

Me too!

[@zippycfpv3619]

Lol just spend it and send it!!! We all think we’re on a budget for our fpv addiction, but fpv is FREEDOM!!!!

[@im_ricebowl]

can you try bigger batteries? maybe like a 300-350? im just itching on how great this whoop is but just like every whoop is...flight time is relatively short.

[@NickBurnsFPV]

4mins is short? Compared to what other quad/drone?

[@im_ricebowl]

wait 4 mins at dead battery (like under 3v) or 4 mins around the 3.2-3-4?

[@NickBurnsFPV]

unloaded the batteries come in at 3.5. I cover this in the video as well.

[@Jacob-ds7vp]

When are you going to review the eachine trashcan!? i hope you can compare the two

[@NickBurnsFPV]

its coming. My weather has been terrible. I have some outside flights to finish up that to prep for review.

[@TheEtorres0146]

Hello nick i was wondering which camera would you suggest for the mobula7? Love your videos

[@NickBurnsFPV]

We need to stay light. Also possibly a mod to fit the caddx eos2. But as for a straight replacement they don't get all that much better.

[@paulterl4563]

Nick, are you sure that you go faster (inside home) with this one that with the Uruav Ur65?????????????...😕

[@NickBurnsFPV]

It felt like it. I would have to look at the flight video side by side to be more certain. I do think its close.

[@jeremychotto2688]

My friend have u heard about anyone getting a lot of jello from there fpv feed in the mobula7? Seems I am getting jello are vibrations in my DVR what could be causing this have u heard about this with the mobula7? No crashes and I have tightened the Camera down a good bit.

[@NickBurnsFPV]

No. Have you changed the pids, or flying with a big batteries.

[@jeremychotto2688]

@@NickBurnsFPV nope have not changed anything but I got one of the new batches and the pids have changed from your pictures everything is the same in the pids but now for yaw I was set to 100 . I use gnb 260mah. The two screws on the side are supposed to be pretty snug once u get your desired angle?

[@NickBurnsFPV]

it should be snug but its plastic, so not terribly snug. Is the canopy also fitting well? Does it wiggle or feel loose? I suggest taking the canopy off to see if any of the posts are broken or loose. It would also help to see dvr of the issue.

[@jeremychotto2688]

@@NickBurnsFPV thank you for your valuable time!

[@Turban01]

Hi man, I have two questions as beginner. In the house flying are using some repeater, because the video feed is almost without any errors? And the second question is about usual flight times with the Mobula7? I know that it depends on the flying style but what flying times are with your aggressive style? Cheers and thanks for your review :)

[@NickBurnsFPV]

No repeater. I sit in a general central location and use laforge v4 receiver. My average flight time is near or at 4mins.

[@engizmo]

Rango loves that spot when you fly. Has he ever swiped one of your quads out of the air?

[@NickBurnsFPV]

not in a long time, and then it was a brushed quad.

[@Matyanson]

Hello, does the remote controll come with the mobula 7 module in the package, or do i have to buy some? How do i choose and connect it with the drone (if needed). please answer ASAP, TY.

[@NickBurnsFPV]

the radio does not come with the mobula 7. The mobula 7 does come with a receiver. You need to match the receiver choice to the radio you have/buy.

[@Matyanson]

@@NickBurnsFPV ok, thanks a lot😊. Can you recomend me some budget radio controller? Also if i want to build a 2s (whoop) do i buy fpv camera that has about 3.3V-5.5V Input voltage? If yes, how do i connect it to the drone battery source? Or do i have to connect it to a seperate 1s battery? I am still a noob to this and advices like this really help me. Ty for your time, i hope i font bother you too much 🙂.

[@NickBurnsFPV]

The frsky xlite is pretty inexpensive. I have a video on it. With a fpv camera I mainly ensure the low voltage spec is under 5v or right at 5v. We wire the fpv camera to the flight controller the flight controller has a 5v regulator. No extra battery is needed.

[@A1n3dr5e1234567890]

with 1 s, the drone keeps beeping . Is there a way to set it up ( do not know if it is for voltage warning ) Thanks

[@NickBurnsFPV]

I suspect it is voltage warning. In betaflight on the power tab decrease the minimum and low voltage values.

[@BrigzyFPV]

Hi, do you run 2x 1S batts or do people buy the 2S batt? Confused! I also see Banggood have it on Pre-Order but on EBay every man and his dog are selling it. Seems odd but I guess EBay ones are going to be fine. My problem is sourcing the batts, these days getting any Lipos shipped is a massive problem for all my models. I'm in New Zealand and just bought some 4S for my Quad, they shipped them from Australia, literally, on a ship, 7 weeks!! Any idea what batts I should be looking for and where to get them? Your vid has made up my mind, been looking for a decent whoop, thanks heaps, great flying.

[@NickBurnsFPV]

I do run the 2 1s batts, I think it flies really well just like it is. I like the tinywhoop batteries and also the GNB 260mah. These can be bought from Australia would that be faster?

[@BrigzyFPV]

Yes, where in OZ can I get them? That would be ideal thx, do you need the batts with the leads or just the plug?

[@NickBurnsFPV]

I can say in OZ. I would google search GNB 260mah, or 1s 255mah and see what shops turn up local. You don't need the ones with leads, standard will be just fine.

[@matthew04101]

I appreiciate you put a link to your dump files. i might need them. and great review. i always enjoy your videos.

[@Shauny_D]

I'm struggling to get mine to drop when I cut throttle. If I cut throttle after accelerating it will climb rather than drop. Not sure why...

[@NickBurnsFPV]

Are you on the stock tune with stock props and original version of betaflight?

[@Shauny_D]

Nick Burns not stock, beta 4.1, gemfan 1635 props, v3 frame, and xt30 connector with real 2s lipos, and the v2 f4 board. I've really struggled to get it to fly without TONS of shakes and Jello on stock props. The gemfan props fixed that without any change in tune. I've tried 5-6 different tunes from other's KZbin vids without much success. I think maybe pids are close but filtering is a bit weird with the dynamic filters. (Stock tune had all static)

[@Shauny_D]

Nick Burns oh and a did try the tune and pids from your dump file. Just Shakes like crazy

[@thijsschadevanwestrum1697]

Nick, which do you prefer: this Mobula7 or the Beta75X (or even the Pro, although that is 1S)? The Beta75X is more expensive, but the Mobula7 and Beta75 Pro are pretty much the same. 1S is slightly cheaper and weighs less... I am interested in your thoughts..

[@NickBurnsFPV]

I think this is best for my thoughts.kzbin.info/www/bejne/p4aahJiFaaqthq8

[@milanteubel8389]

Hi there! Does the standard charger (6in1) cut the voltage automatically when the battery is full? Mine seems to keep going past 4.35v...

[@NickBurnsFPV]

On mine the flashing switches when done, it can be tricky to tell, not great for sure.

[@marjorieumali775]

hello im a beginner and only flied e010s.. can i still get this to learn acro mode ill be practicing on grassy areas to learn... do think i can use mobula 7 to learn'?

[@NickBurnsFPV]

you sure can, but now I would suggest the eachine trashcan. My review isn't up yet, but the frame is more durable on the trashcan.

[@BrigzyFPV]

Do you have to buy the 1S Batts that have "The Smal Lead" on them? Or can you you buy 1S with just the plug, will they work?

[@cottonfootage]

how difficult is acro mode, I'm new and never try acro

[@NickBurnsFPV]

Compared to angle mode it does take a fair bit of skill. The difference is in acro we have to make constant corrections, and not over corrections. If you have a whoop sample acro 2ft off the ground to get a feel for it.

[@Faith_Family_Firearms_Freedom]

If you clipped the battery leads and soldered on an xt30, then what 2s battery would work well with size and weight in mind?

[@NickBurnsFPV]

I would continue to stay light, like the hobby king nanotech 300mah 2s packs. We would need to mod the battery tray too.

[@allennickles3970]

Looks to be a very nice model ...I love to test this one myself..lol...but it's hard to beat the BetaFPV 75x 1103 motors....but this looks to be doing dives really well? As always Nick stellar review!

[@NickBurnsFPV]

Thank you. I had thought about delaying after finding some footage lost, weather is going to be rainy for 3-4 more days :(

[@imperialreptiles1]

Hi, I recently bought a mobula7 and was wondering if it would be possible for you to share your beta flight settings? This is my first fpv quad.

[@AdamFlyer113]

How’d you get RSSI on OSD? Awesome flying. Just got mine yesterday

[@NickBurnsFPV]

click the slider on for telemetry on the configuration page I think it was

[@DimplePoji]

Whats your goggle and receiver setup? Your video feed are clear even though u went down to the basement

[@NickBurnsFPV]

fatshark hd3 with la forge v4 receiver.

[@Tetra84]

What's the run time on 2s batteries? or the larger single 1s battery compared to the UR65?

[@pacospete4299]

forgive me if i missed it but does this whoop have any type of lost drone alarm or beeper ???

[@NickBurnsFPV]

No it does not. At most with a quad of this size we could add a buzzer.

[@masterbaitfishing4947]

For a transmitter I already own a spectrum dx6i and a 3dr robotics iris+ (which states fs th9x on the front and with a frsky telemetry modal on the back....which receiver version should I get. Or should i buy a new one like a flysky one so it will have the safety feature in it and if so which remote....thanks in advance.

[@NickBurnsFPV]

I am not familiar with iris+. I would expect the dx6i to work well with the dsmx versioni of the mobual7.

[@masterbaitfishing4947]

I just read up and seen that the spektrum controllers/receiver do not have the safety feature in case of loosing transmission like most of the other ones...was just wondering how often this comes in handy.

[@NickBurnsFPV]

@@masterbaitfishing4947 Yes this is true, but betaflight also has failsafe built in. Test it inside on low throttle then turn off your radio, should stop props within a moment or two.

[@masterbaitfishing4947]

Good to hear. Looking forward to this little bird as my first fun quad....we use cinematic drones so no fast or fun flying them :) Looking to eventually get the eachine wizzard x220 for a gopro next spring. Learning and practicing on this toy first.

[@imagebyu]

wondering if they'll have just canopies for sale?

[@NickBurnsFPV]

oh, sure, just not yet.

[@robertdean712]

I'm just starting and want this modula7 whoop I was wondering does it come with controller or do I have to buy separately would appreciate an answer because when they show on babyhood no controller sorry just a starter please help

[@NickBurnsFPV]

Yes, this is quad only, you will need a radio, goggles and a battery charger if you want to charge fairly quickly. The included battery charger charges really slow.

[@jorvji7222]

Ive been waiting for this vid ! C clip up and down are common on 0703 0603 motors, i complained w 1102 which doesnt have this c clip it made the shaft pushed down when you push the props 😅 I always love how u fly so good indoors zigzaging your furnitures and so on, and also I am pretty surprised it could fly near 4m with 250 batt, how long will it go w/ 300mah Betafpvs ? Or even 550 😱 So for conclusion, Mobula75 or Beta75X (i personally love them both in terms of looks, performancewise) ?? And reasons ! I trust your reviews Nick !

[@NickBurnsFPV]

I would go mobula7, due to longer flight times and adjustable camera. Bonus its less expensive, we can buy several tubes of welder or spare frames and still save money.

[@XEXTRiZ]

How would you compare this to the 75x with battery life and flight performance? Can you feel a difference between the F3 and F4?

[@NickBurnsFPV]

I have a comparison video coming this week.

[@atlanticwoodsman8347]

I'm curious on what you do for a living your house is HUGE great vid!

[@NickBurnsFPV]

I have been in IT for 22yrs. I am currently an IT manager. We live in the midwest where homes are pretty inexpensive. I suspect most see the valuation of our home far above its actual value.

[@atlanticwoodsman8347]

@@NickBurnsFPV I knew I was in the wrong bizz lol.. Love your vids so keep up the good work.. I live in east coast Canada so just for this whoop will cost me a 160bucks once all is said and done.. Its hard for us knew pilots to get going.. Oh well.

[@NickBurnsFPV]

I have gotten a bit of an education on other countries/customs costs. Most in the US don't appreciate how good we have it. Getting started is challenging in many ways. Enjoy the ride its worth it.

[@dougdigeronimo9551]

Wow, just wow. Incredible flying. You sir, have skills

[@NickBurnsFPV]

Thank you.

[@FRY_FPV]

Yaw washouts comes from the ducts as NotFastEnuf explained it to me one day. If you manage to get the same build without ducts, you wouldn't experience it. It's something to do with air not coming to the propellers and suddenly coming into them which causes yaw wash outa

[@RevO-One]

Omg you are ripping that house so easily fast thats insane! Nice review thanks

[@NickBurnsFPV]

Thank you

[@Hellmuthsilva]

On your dump file you have dynamic and airmode on but on the picture you have it off. Should I have that on or off? Thanks

[@NickBurnsFPV]

It really doesn't have much of an impact if any. I would say try it one way then the other and see what you think. It won't be the difference between be able to fly well and not.

[@Hellmuthsilva]

@@NickBurnsFPV thank you. Merry Christmas to you.

[@onclefly8450]

Hi Nick, fastest whoop. it's a killer of betaFPV 75s whoop. The Mobula7 it's the best 2S whoop. 😉 Thank you for the pictures Betaflight Dump files link. I wait him. 😉

[@mr.slater4577]

How can the quality be THAT good throughout the WHOLE house? Awesome

[@NickBurnsFPV]

Some say the house is made of straw. I do find the fpv goes down if I am upstairs or when I am downstairs in the quad cave. Location is important. Open floor plan helps.

[@scootroter4859]

Nick, if you were going to mod it to an XT30 with larger gauge wire, what 2S batteries would you recommend? I'd want the weight to still be very low... Thanks!

[@NickBurnsFPV]

Personally I would stay light. The hobbyking nanotech 300mah 2s is the lightest I am aware of.