Removing My Sheds Entire Roof And Installing a New One.

[@stampynate0007]

Typicaly a video like this would be more serious but when Haden comes in it’s a completely different story

[@ebelray6890]

I hope your friends will all be programmers or something eventually.. you seem to be the only one in this group who knows how to do a project like this and has a clue

[@gamingwithmr.fregles8802]

I can officially say you are a certified PROFESSIONAL roofer.

[@JacksonRogneby]

Lol

[@DragonworksAnimators]

As someone with the building experience, it’s best to use nails for building the shed or any houses because screws break if they bend too much and nails, don’t which means hurricanes nails can allow the wood to move freely

[@mutedelevatorsofficial]

another video with hayden!!

[@stampynate0007]

YYYYYYYYEEEEEEEEEEAAAAAAAAAA

[@wibwabz]

3:11 the kids next door are watching what you are doing. haha. at one point, they are looking through your gate between the fence and your house.

[@everettelectronicsandmechanics]

Reminds me of the old durability testing videos

[@The_FireAlarmGuy]

Nice video Nic 😊 Sad to see the old roof tiles go 😭

[@Sparky-joystick.1308]

You guys have the best time

[@Aron_B10]

Yea, new shed roof looks great, i didn't notice da upload notification

[@JessieMHadaller]

For sealing shingles together, you'd want some type of tar sealant.

[@allisonmiller170]

The plane saw your shenanigans 😂

[@gamerboy12970]

Great video good installation keep up the awesome work 😊

[@keithpierce8458]

good work Nic

[@wibwabz]

Hayden is back! Will he be in more videos in the future?

[@nics-systems-electric]

Eh maybe maybe not

[@FredPie-z3f]

I love ur channel I have learned so much about the stuff that I’m interested in thank you sooooo much❤️(second)

[@overkillgaming9793]

You should varnish them with a wood preservative so they won't rot

[@robertbeyers1308]

Nice video. But I did see one main problem with the metal flashing. The bottom (lowest point) should always be under the roof paper. But the rest of it should have been above the paper. Due to water still can flow under the paper when the metal flashing isn't install correctly. Second this is which I've done is hit the plywood with primer. Iincluding all the cut edges and underneath to help seal the wood. Painting wood seals it really good. But that option is optional. There might be a way for you to correct your mistake. But I would recommend talk to a roofer. Before you attempt to make any corrections. By the way I am also not a roofer but I have done a whole house with an actual roofer. So I did learn a few things here and there.

[@nics-systems-electric]

I will be leaving it the way it is I don't see any risk of water making its way under there when it was never a problem on the front or sides before without the flashing

[@robertbeyers1308]

@@nics-systems-electric actually it was a problem and it is a problem. After all that is how water is get to the bottom. Water doesn't rise. It always finds a way to get to the bottom and without the flashing install correctly that how water is. It always goes to the bottom. It go under the paper and slowly work it way down. So u suggest next time pit the flashing above the paper at the tip and sides. This time silicone between the paper and the flashing on the side and the top to stop water penetration.

[@nics-systems-electric]

@@robertbeyers1308 Yes as you said water doesn't rise so it won't go up upwards and under the roof. The previous problem was caused by water ingress and absorption at the low edge of the roof due to not enough overhang the front of the plywood had zero water damage. Therefore I'm not concerned and certainly not about to rip apart a brand new roof.

[@NotFKC_RobloxGaming]

Yo, DIY your house roof and ask ur mates if its a good idea for a video lol

[@tronicsterspeaker9946]

0:56 be careful you might fall through

[@vacuumboy6.0]

"How much does your brother weigh?" 3000. 😂😂😂😂 lol typical brothers 😂

[@FI-TECH-250]

Damn. Im not speechless, im roofles about this one.

[@whistlingtomb3299]

What Millwaukee blower is that?

[@marksmith-ew7ir]

Not bad for a reroof.

[@ChrisTopher284765490]

OSHA Approved !

[@Dilsonalarmsandelectric]

Nick, what grade is Hayden in?

[@crimsonrainbow4344]

Just three dudes building a roof! What could go wrong? "roof collapses after installation"

[@pg69yt]

20:39 nic got to act like a father of six lol

[@majesticcrane9962]

Moldy roof holy sh!t

[@bloxyanimates3680]

My grandad today installed a new electric stove

[@robertmailhos8159]

Roof repair job with nics systems and electrical 😊

[@an_official_scratcher_alt]

Past videos: NOT SATISFYING (AS IN ASMR TYPE STUFF). This video: SATISFYING.

[@Siren_StrObE]

The roof on the garage is holding up well, right?

[@nics-systems-electric]

Probably

[@numatic12stan]

So were you doing an apprenticeships course?

[@nics-systems-electric]

At a college

[@ASAPMEXICANBOI117]

i was watch this video then a fire alarm going off

[@erikmorozov1740]

#whatafirealarmfail

[@B9L3_Official]

Yo Hayden is back

[@rolandmcphail5060]

Another ''fun'' home project lol. Kind of surprised you work with fractions of a inch, is the metric system more common in Canada?

[@nics-systems-electric]

The trades are different as materials are still sold in imperial units often but codes are done trade size or metric

[@vitaldelicious6340]

I was expecting a galvanized square steel and eco-friendly wood veneers expansion

[@JacksonRogneby]

Lol😂😂😂

[@JakeOfficial2002]

First Comment Nic

[@cutepaws3859]

Hanging out with the bois ™️

[@Firealarmfanboy]

L love you

[@All_ConsumingBandu]

Are you doing a video on this because you ran out of ideas?

[@nics-systems-electric]

I have in the past shown non-electrical and fire alarm work. As said in the video due to me being in school I do not have time to be doing many of the videos I would have been. To try and maintain an upload schedule I may have to switch out videos. If you do not like them can choose to skip them.

[@All_ConsumingBandu]

@@nics-systems-electric This video is actually pretty funny and I like how you did this as a group. I also heard in the video you're taking an electrical course which is cool. Just before the video, I thought you ran out of ideas.