How to Connect two Fire Alarm Systems Together as One

[@62773_lifts]

WHAT A COINCIDENCE!! I was wondering how to connect a two fire alarm systems together! Perfect timing Nic! Good job!

[@firealarm421]

Alarm relays

[@GrifsProductions]

You do the best "How To's" Seriously!

[@leoschneider3570]

Back in elementary (and middle) school we had two buildings (one with preschool, kindergarten, cafeteria, and gym, and a second with 1st-8th grade) half the first building had an old Edwards system, the second half had an addressable firelite system. The second building had an addressable notifier system. They were linked together in a loop

[@ShayBlez]

Always gently wondered this in the back of my mind. Thank you for sharing with us! :D

[@Blixt1000]

I've seen a panel link with a vintage AC panel and a communicator panel that had a retrofitted relay that was wired in series with the bell circuit on the old panel.

[@TheMcGeeTwins]

Spawn camping the notifications🔥🔥🔥

[@That_9838_dude]

I was just about to ask you to do a video like this... i have a ms5ud, and i wanna get a notifier nfw 100x and have them linked together... so, thanks for making this video it will be helpful in the future

[@DanTDMJace]

The NFW-100x is addressable, so you'll need a monitor module on that panel

[@That_9838_dude]

@DanTDMJace ik

[@GentexGuy1997]

ESTis trash notifier is pretty good. Simplex is pretty good in someways. firelite is all right.

[@All_ConsumingBandu]

Hey everyone, would it be funny if Nic had his german shepherd pull a pull station for a video? That would be funny.

[@wibwabz]

it would be cool if there was a tracking alarm feature, where similar to a tracking supervisory, it is only in alarm while a condition is met, otherwise it's normal.

[@The_FireAlarmGuy]

Nice and helpful video Nic 😊

[@the_1drummajor]

this setup still can work...however both panels will also need their companion panels annunciators at both locations ex: Location A: Main Panel A + Annunciator B Location B: Main Panel B + Annunciator A or you can also do: Common Location: Annunciator A + Annunciator B Point is, you need to have a common point of physical control of both systems regardless of where the CPUs are located

[@nics-systems-electric]

Not always. I've seen systems where one panel will just give you the general location the other system is activated and that the other panel is in alarm and you would then have to go to that panel for specific information.

[@Charlieyt-b6e]

First🎉🎉 can’t wait to finish the video thanks for all the vids nic

[@Am8gaming-z1r]

Is December you gotta make it?

[@kashtonklein4608]

Hey Nic, when do you think the Fire shield was made?

[@EMMag-v4k]

I live along the Mississippi River in United States and In an area with Tornados and trying to Wire a light switch to active Tornado alert and trigger a Supervisory and Supervisory relay . NiC my question is will the supervisory relay power a NAC i have a Firelite Ms10 UD. I know that the Regular Nac s wont go off on a supervisory only a fire alarm. The NAC is a chime strobe L series by system sensor

[@nics-systems-electric]

If the nac can't be set to a supervisor then yes you can use a relay and take power from the non-resettable or resettable power

[@EMMag-v4k]

Oh ok

[@alfonsgamingtornadosirenfan]

the issue with resseting the both systems if i had this as an connected system from my room to my outdoor building i would disable the zone on one panel so when i reset one the other system dosent need to go into alarm again. and in the end i can reset both and when both are resetted just enable the zone again.

[@GentexGuy1997]

Nice

[@EMMag-v4k]

I got two separate fire lite ms10uds in separate buildings I was wondering how to wiring them together so that if one building goes into fire alarm I get a supervisory on the other panel

[@nics-systems-electric]

Same thing other than you would program the zone as supervisory or supervisory AR which is what I have shown in my house system I have videos on it.

[@crazyboy72375]

i am gonna imagine you could not hear for a bit after that holy crap

[@nics-systems-electric]

All good. Not all that loud.

[@Dawezil]

Hey nic, I have a kiddie FX-10 and the ribbon cable isn't making contact with the pins in the connector, do you know a way to make it work as I spent a lot on it and I don't want to break it.

[@hotbytesB]

What are you going to do for your fire alarm new year four 2025

[@ZoltanFranko-Doro]

1 HOUR AGO, AND THIS MANY COMMENTS?? Wow, Nic is Extremely famous

[@nics-systems-electric]

I'm most definitely not lol

[@robertbeyers1308]

@@nics-systems-electric 😂

[@ZoltanFranko-Doro]

​@@nics-systems-electricxD

[@robertbeyers1308]

Nic is it possible to make either system reset button reset both systems at the same time?

[@nics-systems-electric]

Not that I know of

[@robertbeyers1308]

@nics-systems-electric it sounds like to me someone needs to start making a way to do that.

[@Maddoxblixtpreppy14]

You need a EST genesis horn strobe

[@nics-systems-electric]

It's in the video

[@hulktheman23]

I have been in a building with 4 systems tied in together for alarm. It goes off multiple times just to get it reset.

[@thecomputech3353]

I thought you were selling the notifier panel???!!!

[@nics-systems-electric]

I have it listed

[@thecomputech3353]

@@nics-systems-electric Is this like a last farewell experiment/tutorial with it then?

[@thecomputech3353]

@@nics-systems-electric Still grate video anyway! :)

[@elevatorfan19_roblox]

hi nic

[@wunderbox.offiziel]

Hello

[@Real_Hydrox]

%

[@noahkahoot3510]

10:49 Fire alarm fall down

[@joeycaridi3030]

I'm surprised it still worked, definitely some unintentional durability testing from a drop from a fire alarm panel

[@drum-corps-fan]

Would be great if I could do this but my fireshield died. I have an SFP 5 UD now

[@Big_Noob-ROBLOX]

👍👍

[@ASAPMEXICANBOI117]

ok but how to connect and disconnect to call the fire department

[@FireAlarm.Dude2011]

Letsss gooo

[@joeycaridi3030]

Now get rid of your Fire-Lite MS-9200UDLS panel and use the devices in the garage tied into into your home's Notifier NFS-320 system while replacing all Fire-Lite pull stations, modules, and detectors to all Notifier

[@Defianthuman]

if he did this then the garage would set off both(well not both since it would be only one system) Also, the generator powers the garage so no worries about battery.

[@West_Kootenay_railfan]

1:05 talk tuah??

[@VOLTRONDEFENDER4440]

I work on my store on Roblox and connecting panels together is simpler their

[@TheMcGeeTwins]

How do you do that

[@VOLTRONDEFENDER4440]

@ I use a simplex one and you just duplicate the transponder which is the panel and rename it from transponder1 to transponder2 and vise versa

[@TheMcGeeTwins]

Ok

[@Firebash9]

I have not watched yet I am seeing if I can guess I think it will me relay to zone

[@wunderbox.offiziel]

Hi

[@Forest_vr_ofc]

Nic can you give me one board, I got scammed and now I'm broke they scammed me for 400 dollars

[@systech911]

You lost me at systems lol lol sounds like my phone from ma bell telephone co. Lol

[@keithpierce8458]

Nice