Simulink Control Systems and PID, Matlab R2020b

[@CésarGuadalupeMartinezChavez]

I found his explanation very clear and didactic, which made PID control easy to understand.

[@fahadbinislam2344]

Thanks man , your video helped me to understand this thing. I wish my teachers were as concise and informative as you.

[@클린룸]

Your lecture was concise and great for a beginner like me to fully understand PID control. I appreciate that very much. I am going to purchase the Simulink software.

[@tahoon2009]

Really useful video, every minute counts; without complex equation, effect of controller levels clearly explained, which enables better understanding of theoretical background , all the best

[@Arsamiei]

Thank you for the clear and direct explanation.

[@whg1504]

As a Simulink beginner Ive been finding PID controller Thank you!!

[@EEBAyanSiddiqui]

Great explanation! Every detail was covered by you. Thanks

[@ergildioantonionhantumbo5959]

Great Explanation Sir. I really appreciated this. Very useful. Thank You.

[@alirifaie9116]

Woow. Very nice way of teaching. Thank you!!!

[@alongkotphoosangad9882]

step by step, one useful video from I had seen many videos before, thank

[@yaghiyahbrenner8902]

really good video I learned alot and did the demo, your pace is good. keep it coming.

[@pongalplayer]

Wow nice explanation. very easy to understand. thanks a lot

[@TheKingSpeaks]

Great Video. Great explanation Thank You !

[@efeerginsoy6718]

So good and easy to understand for me. So nice and thank you so much. I have request some explanation on control algorithm and example.

[@Haniberru]

goddamn bro, your explaination is soooo good

[@ovidiualexandru8534]

Very helpful, I understood better than at the faculty :)

[@wasanadilrukshi4305]

Very good video. I learned lot of important things.Thank you very much.

[@noureddinedjemai5528]

very illustrative video I learned lot of important things thank you

[@omarsalem5832]

Very useful! Thank you!

[@nadiabd6805]

Nice lesson, you are a genius

[@kyawtkyawthtay3449]

Thanks a lot for sharing the good video lectures

[@marianput2407]

Good video and very good explanation 👍

[@redbluescrewyou]

Set the N term to infinity (1e09). This gets rid of the filter implemented in pidblock, as such it will be exactly the same as the block diagram form of the pid.

[@classicwingswheels7749]

Thank you for your very clear video!

[@minaesmat2587]

it's a really very useful video for basic clear idea about PID tuning, so thanks a lot for your effort and do more videos please about more complicated control systems

[@fredymguevara2499]

Thank you very kindly for your help! please be well!

[@shohanranasinghe4403]

One of the best explained video, can u do a video on writing plant equations for induction motor designs?

[@BilgeKaanAtay]

Thank you for the lecture. It was very clear. If I want to compare PID and Neural Network, I have to find a dataset for plant training right?

[@402tm]

very clear, thank you

[@headban1434]

to separate the input from the v(t) line, I think we should hold shift then drag them. not ctrl. at least thats how it worked for me. thank you for the tutorial!

[@bradleykingston551]

Extremely helpful in understanding the PID algorithm. My question is regarding the relation between the step input and the transfer function. Is the step input just a random assumption of what can be feeded into the system while it is going ON?

[@NikolaiK]

Correct. You can send any kind of inputs into the transfer function. The step input is the simplest one. Keep in mind that the more the input changes, the less the controller will be able to follow the required path. The step function is the simplest input, and we generally use a ramp input as the next level. That being said, the input could be literally any wave form. One example I like to give is if the transfer function is a drone and the input is coming from a person on a remote. That input will be quite different from a step

[@ahmedal-adwani2534]

Welcom back Great video

[@wellid2087]

Great video! But, adding Derivative block in PID controller would lead to an incorrect result.

[@SMV1972]

Спасибо огромное. Отличный урок

[@Elmaxsivu]

Wow you are a good teacher

[@marmeh6083]

this might be a beginners question but how do I implement this on my line follower... I dont understand where do I get that function you have or if it is always the same(i suppose it differs from different motors) but still there are so many questions ...i would love to see u implementing it on a line follower... very helpfull video thank you

[@alperyasin710]

Sir, thank you so much for the video!

[@husseinshutari5209]

Could you please help me to solve the following error. Error using fun (line 16) Derivative of state '1' in block 'model4/PMSM /Integrator' at time 1.09996 is not finite. The simulation will be stopped. There may be a singularity in the solution. If not, try reducing the step size (either by reducing the fixed step size or by tightening the error tolerances)

[@chrisapanagiotopoulou4435]

join the club....

[@trungthangnguyen723]

Thank you for the video , good job

[@alyssasepcic4555]

Is there any way to have a multi step step function w/ PID?

[@tylerdurden4121]

great explanation...

[@viodel8032]

Thanks a lot for this useful video. Did you face zero cross detection error by using saturation block?

[@Garuda_Vigyan]

can you help me with pid pid controller simulink, its your great supervision in matlab.

[@kapitanbaobao9222]

Great video bro

[@hadialihadi7287]

i thank you ... good video and good explain

[@rozahemin9819]

Can't thank you enough!

[@lorenzobottoni7032]

hi nikolai so useful thanks

[@김현우-j8k]

sir, you set the upper, lower limit by 2, -2. is this number reprensent a voltage? like 2voltage or -2 voltatge

[@angelsantanagarcia9664]

Good video, thanks 👍

[@ORNIB95]

Thank you for the video Can you make a video about how to control position and speed of a dc motor using pid and absolute encoder

[@malikjavadov366]

extremely good

[@aathivilla]

How to find peak time and rise time from the simulation ?

[@LukTzeChing]

I am also want to know the answer, how to use the tool to measure those time

[@kifahzaidan4505]

THANKS A LOT CAN YOU PLEASE POST VIDEO FOR THE (CONTROLLING OF DC MOTOR 'ACTUATOR ' PROGRAMABLE POSITION WITH MEMORY BUTTONS USING ARDUINO. BEST WISHES

[@gildardomendozaachee331]

Thank you very much!

[@jonsnow3513]

Wonderful waawwaaaweewaaaa thank you sir

[@pawandev1673]

Please upload more vrep videos or tutorial videos because vrep has been updated do much

[@dilshanchrishantha6548]

well explained. thanks

[@adityamisra7702]

thank you sir thank you very much.

[@nyahhbinghi]

difference between discrete and continuous PID controller?

[@hamelillah7545]

Hey , nice to meet you I have a program for a day just how do I make it throughout the number of hours of the year thanks

[@kaduhisgervizaelle]

thank you brother.

[@habtishasres7867]

appreciate keep going bra

[@hopethefuture2136]

thank you verry much

[@vigneshak6456]

Can we use this for Quadcopter anyone explain me please!

[@GhaithAlMasri-cv3dg]

Is the transfer function for a real system ? If yes please tell me for what system

[@黃淳俊]

why two model step response ande bode is different

[@gamerboii0566]

You are the definition of God!!

[@rudrakhandekar1545]

Which software is required,plz tell us

[@NikolaiK]

That is Matlab/Simulink

[@ApplyChemicalEngineering]

Perfect

[@NhatAnh9697]

wow thanks

[@TechSouls-wn6jc]

Sir need more lectures on simulink related to controller topics

[@alikemalguness]

Great

[@ZhangirAkhmet]

thx

[@efeerginsoy6718]

really!

[@techzila5379]

prof sir can u implement this paper DOI: 10.1109/TII.2019.2959658

[@efeerginsoy6718]

I found his explanation very clear and didactic, which made PID control easy to understand.

[@efeerginsoy6718]

Really useful video, every minute counts; without complex equation, effect of controller levels clearly explained, which enables better understanding of theoretical background , all the best

[@omargmartinezzepeda3375]

very illustrative video I learned lot of important things thank you

[@efeerginsoy6718]

Thank u very much