NIKON D7000 ERROR/INTERMITTENT MIRROR LOCK UP/DISASSEMBLE/ASSEMBLE/FIX

[@jacinto19571]

Parabéns, tens uma competência muito elevada (acima da média).

[@giuliamocristi1021]

How did you repair? Grease/ lubricant? Or replace mecanism?

[@techxian]

there a damage shutter blade in there that cause of error and mirror lock up..if you dont know how to repair the damage blade..i suggest replace the shutter assembly

[@giuliamocristi1021]

@@techxian oh. This video is d7000, i have a d700, and the shutter blades seems to bee fine. I opend the mirror....

[@giuliamocristi1021]

@@techxian apperture mech has a small movment but one i put a lens on the body it would not close the mirro..

[@giuliamocristi1021]

First question was for d700 but i commented on the d7000....sryy

[@techxian]

@@giuliamocristi1021 ah isee there a part that you need to replace in aperture mech assembly

[@Mark-vy6rc]

Any idea what can cause live view not to work, black screen and err? Using view finder instead of live view I can take 1 picture and get flashing err. Black view finder until I have depress shoot button, at this point mirror goes down and focus works great, takes a good photo but flashing err until I half depress shoot button. Replaced entire shutter assy due to bent blade, is replacement assy broke?

[@techxian]

may be the timing of the shutter assembly is not on right position..there an arrow guide in there that need to position

[@Mark-vy6rc]

Thanks, I will give it a try. This would be the arrow on the white gear, I assume this would line up with the small window?

[@techxian]

@@Mark-vy6rc yes sir there a arrow and line from the shutter assembly

[@Mark-vy6rc]

Thank you sir, saved our camera!

[@Gourmondise]

I have a very similar issue with an old D700. It started years ago when the camera would fail to open the mirror and the shutter and would display an Err. The camera was only missing a few shots per hundred then it worsen through a few months. Now when it wants it works, then I have times that it won't even operate not even in 100 shots. The mirror won't move not the shutter. You can see it is trying but fails badly. I'm thinking to replace the whole shutter assembly.

[@maximize752]

Good night, I have my nikon d7200 with little use, so it works at one time it fires the normal aperture and at the other it hangs with an interminttent error, because I have already cleaned all the contacts of both the machine and the lens and it continues like this but when I change the battery with the lowest charge it doesn't show any kind of error, because I'm not understanding when I put the battery with the low charge it doesn't give an error, when I put the battery in full charge it starts to present this error interminttent skipping the photos, one registers and the other not there when the battery reduces the charge to lower it starts to work normally. can you let me know with your experience in this area what can i do? and if you can't help me with a tip, how much do you charge me how much to solve this for me?

[@techxian]

thats problem sir is rare case...but possible mainboard is the problem thats common issue of D7200 .

[@suvobaroi2971]

Where are you from

[@minhdoan5872]

Sir, my camera Nikon D7000, Internal auto focus only works in Live view mode, not work in normal or viewfinder mode. I don't know why. i changed both AF-S and manual lens. Because AF didn't work, I couldn't take any photos in viewfinder mode. Do you have any ideas?

[@techxian]

try to reset the camera first..if nothing happen may be the auto focus sensor in the mirror box is defective...is the lens moving but not locking in the focus area except on live view mode?

[@puneetkashyapphotography653]

Hello Sir i have an issue with my nikon D7100 whenever i repaired my cam(BEACAUSE AN ERROR ISSUE) Than My White Balance Kelvin Setting Not Work Properly Can u Help me

[@techxian]

what parrts you replace or repair sir? check also sir some sensor at the upper part of the mirror box if there a open connection at the connector..

[@VikasKumar-ll3fb]

Sir, I have nikon D7000 The problem is without lens work good I attach the lens on body error show , could you please help this problem,

[@techxian]

the aperture mech is the problem of your camera...when you facing the camera mount ,there a metal at the left that moving the aperture of the lens it should moving up and down when you press the shutter button..

[@jaorodriguez9731]

@@techxian sir where are you located po? And how much for the aperture mech po?

[@techxian]

@@jaorodriguez9731 sta cruz laguna po sir..kapag ganun po problem usually po 3k ang repair

[@Hunu_Creation]

Vyy same prb

[@lalakenggala5166]

Loc.

[@techxian]

sitio 5 kanluran bagumbayan sta cruz laguna..mas mabilis po kung search ninyo ang talyer ni gilbert s google map, andun po ako..