Nilight 12 Inch Led Light Bar

[@yamahandaatv5765]

Good thing he adds a whole 5 minutes to show us how to open and close tool boxes. God where would we be without him

[@marcfacunla3549]

Glad you addressed the light on the switch, almost didn’t get this for my zero turn because I was afraid of battery drain. Good video sir.

[@brandonguck2523]

The switch is wired backwards, just change the power wires around on the switch and the red light will only be on when the switch is in the on position

[@qb1099]

I need to try this. My first install attempt ran my battery down overnight without the light bar even being hooked up yet. My switch has a little blue light.

[@Cole-mc2cy]

I always drop a like on 3D machines videos before I watch them because I know I won't regret it

[@CraigArndt]

Hittin' the like bar for the light bar. Nice job.

[@Bengy22]

I have a light bar on my bicycle, lights up the trails real nice.

[@trevorgraham2964]

He is literally so smart with everything! Love ur videos man and keep up the good work!

[@NilightLed]

I think so!

[@riverking4u]

Nice music, clear instructions. I'm down for one. Great job !!!

[@mikestewart7563]

Just wanted to thank you. I followed ur unstructions and it all worked out! If I can do it just about anyone can!!

[@mistersniffer6838]

Wow, they are SO bright! Oh, wait, you didnt even bother to show it.

[@snoopdogie187]

If you wire a relay up to the stator, to have a switching ground, you could have the switch light run only when the engine is running. You could probably use the smallest relay you find also since thats a small led light, so it would be a cheap upgrade.

[@Futurebeefcake]

3D I love your garage setup and how everything is organized

[@jeffwirl]

Hey just a tip cross the chains on your trailer so the chains catch it :).

[@peytonmccosco5712]

Yup

[@crazycooter6241]

I have the same light bar. Bright asf. I love it.

[@NilightLed]

glad to hear this!

[@Derek_00Mustang83]

I run nilight pods on my brute force 750 and for the price they've outdone my expectations. $25 and never failed

[@coybennett98]

You should have hooked up a switch to turn on the light to the switch 😂

[@skulledmonte84]

i got a 20 inch flood an spot beam along with three 4 inchers on my suzuki eiger 400 it turns night into day i love them

[@GaynNovi]

I wish you lived closer, I need one of these installed on my Jeep

[@zanders1282]

Doltan your a legend and a inspiration so keep making amazing content your a absolute legend

[@tommypumilia9421]

Thanks 3D machines i bought my self one

[@MrWiskin]

That should help you look for jilted Prom dates in the dark!

[@DeliberateNRandom]

How's it holding up 4 years later?

[@nicholasgeil6978]

I just added a 6in light bar to my Dirt bike, Yours looks good

[@NilightLed]

thanks.

[@tymullin1644]

Light bars are mint

[@quadrunner1932]

Dalton, that trailer is badass!

[@scottbentley7920]

this looks so good

[@codygardner6949]

You are the best 3D machines

[@kylesydenham8310]

for my light bar on one of my quads i put a splitter in the ground and then a switch so you can switch the light on the switch on/off and also a high and low beam on the existing head lights on the quad so when it use to be on low/high beam high beam at the moment is low beam and the light bar comes on when it on high and another switch to turn high/low off! its complicated but pretty easy to use ;)

[@michaelthompson561]

I have some of there light cubes there good for the price but the mount tend to break to vibrations but they have good customer service and you can gets new mounts free

[@stevenmince9771]

I just ordered my light bar

[@Bailey90702]

3D best on KZbin keep up the excellent work dalton cant wait for the next video

[@machineleo]

I have the exact same light bar. I bought it about 2 years ago

[@loganlock4301]

I like your light bar

[@psycho--maniac9775]

I realized today i love your videos so much because they incorporate the same style that Casey Neistat uses. Love the videos keep up the amazing work.

[@dahlmasen3084]

Wouldnt it be better to mount it in the front of the bar between the headlights?

[@ianschamehorn3450]

That's where I mounted mine. That way the rack is still usable and so is the light bar.

[@eastrockaway11518]

I was thinking the same thing, RUN THAT TRAIL AT NITE TIME BUT LEAVE THE COOLER

[@MrSeththompson1]

Would it impede air flow to the radiator?

[@frankyalvarez7160]

Hotdogsandbuns not at all, I bolted it to the front of the rack. I have pictures if you want a guide

[@huntersS197]

@@frankyalvarez7160 yes pls

[@Cthulhu621]

You know he's professional when he owns a centre punch

[@Motonion]

That is one bright bar.

[@caseysimon6357]

I, too, have a new 4 wheeler and would welcome a new light bar ! 🤞🏼🤞🏼.. it’s a 2021 Kodiak 700EPS 😬

[@backyardrebuild7481]

I have to admit I went on ebay and found the exact same light bar by coping the name and this is actually a pretty good light bar

[@benkalis6147]

Great video

[@lowcountrylivin5744]

Love the set up

[@simpsonbeeffarmsoldaccount2832]

Your videos always make my day and make me smile thankyou

[@KoolMada]

Those lights are Jizzzzzzzzzzzunk!

[@bradleyhermes7071]

machine freaks where are yall??

[@urmommaahugehoe]

idk

[@astroplays_yt1144]

on my computer drunk

[@horacesawyer2487]

Like the video. Wondering what gauge wire would be an improvement over these wiring harnesses commonly offered.

[@iGotTheJuice3]

How do you not show driving it at night?

[@BenBroPlays]

@@DylanClements98 driving*

[@joeygunzilla6878]

Wtf RIGHT?!?!

[@zack3812]

thanis 3dmachines im ganna go buy one of the light bars for my 4 wheeler and keep up the good vids

[@NilightLed]

I believe he will show the Nilight's links in the description section.

[@atvrepairsandmore2482]

check the wiring on the switch. it might be wired wrong. it should be to where when the light bar is on then the switch is on. the middle should be load then one of the outsides will be negative and the other positive. might be worth double checking

[@lowcountrylivin5744]

Hey here's a sugestion if you want to light up the underside of your atv buy the LED GLOW brand. I use it on my atv. It changes colors and has a wireless remote to control the settings.

[@alonsomireles2012]

wow really nice video! nice garage to with everything you need to do anything haha

[@mr.lamerz9934]

3d you are my favorite youtuber keep going and good luck!!!!!!!

[@ryanoxley3065]

Wow another interesting video😛😛

[@hauntedgun]

Awesome Job buddy. Thank You

[@thestringshark]

I understand that it needs to be connected to a grounding spot in order for the light switch to be on, but do you need to leave it disconnected at all times if you do not want it draining power unless the switch is flipped

[@matthewmosser6180]

Braydon price has a light bar too its sick

[@domward5726]

Your awesome keep It up. I watch your videos everyday. I'm from the uk.

[@thatboostedguy566]

3D if u had 1 color wat would u paint your truck

[@3DMachines]

Purple

[@thatboostedguy566]

Also when didn't u say u recorded the video of u making your trailer

[@alexgrant3329]

3D I love you

[@brotherhoodproductions3614]

1st 100

[@nholman6023]

Yeah 100

[@spackelquack9252]

Very smart trailer

[@Jake36183]

3d you can wire it so that the light only comes on when you turn the switch on :)

[@justaguy427]

Get some unibits. They drill nice holes in plastic. If you used a relay, the light will only illuminate when you power the light on.

[@MW-dot]

Dalton I've been watching for a while and I've gotta say I always love your videos always quality content

[@cole2000henry]

I like how you took the gas cap off even though you didn't need to

[@rickygilbert9793]

This video would have been rely helpful when I was installing my 20 inch nilight bar haha

[@Carmelldansen4eva2]

I was dripping determination in one of my classes that I use my hands in that class with machines.

[@billybull7419]

Wat

[@zanebutler6579]

U should make blogs they would be great 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏻👍🏻

[@wildtrophyhunts300]

Great Video!

[@BeffJlock]

Nice trailer

[@Haderg33]

For the light up switch I would have rigged it up to the key on switch

[@mattsantoro7816]

tatum mcclemts

[@DeliberateNRandom]

That's what I did with my air horn. You don't want someone accidentally hitting the horn button.

[@saunder1233]

Hey 3D been watchin for a while. Quality vids. Keep it up man. Best vlogger out there. 👍🏻👍🏻

[@carsonmcnamer5321]

Btw that ending music is the best

[@dylandossantos2997]

3D I am probably going to get a mini light bar and I will most likely put it never the grill on my ATV

[@cjmarcel2971]

Neighbors: what's wrong honey he is up to something again:( 3Dmachines: I am going to play around with four wheeler Dear 3Dmachines not trying to be rude ur me fav

[@tjwatson1384]

Nice vid keep up the fantastic work.

[@bestblazed9077]

nice lights

[@NilightLed]

thank you

[@jaredhalvorson3532]

Very nice I have a 2011 Yamaha grizzly 450 as well but it's blue what year is yours ?

[@_joe_green_]

Yeahhhhh been waiting all day 😎

[@blackbird1234100]

I love nilight. good quality good price. have one on my atv, I have the 7 inch

[@blackbird1234100]

and I had bought my dad the 12 inch combo beam for his yamaha wolverine r spec

[@NilightLed]

thanks for support friend.

[@bigsur3057]

What size bits did you use to drill the mounting bar holes and the on/off switch hole?

[@barryreed5158]

Terrific video. What size hole did you drill to mount the light switch?

[@Robert08010]

I miss my Kodiak!!! I had an 04 Kodiak 450 which was just about identical to this except the old Kodiak didn't have independent rear suspension. I think that's why they replaced that model with this. This has got to be an 06 or later.

[@kevinward580]

you should do more trail rides

[@EccentricEllis]

Question, why did you mount the light on the back of the rack? You can't put anything on it now and unless you run it angled up, it'll shadow on the rack! Why didn't you mount it underneath the front bar?

[@jamesc5993]

3D Machines why did you go for a utility Quad rather than something like a rapter 700R?

[@codyfurey4890]

Hi 3Dmachines

[@atvaddiction2117]

bro thanks so much i am trying to see how to in stall this light bar and you just helped so muck bro thanks agin.

[@renevakencia1237]

How do you keep the switch bar light off???.. Run a negative wire ??? Where to light bar????..

[@rykerinthewild1155]

My son got one of these for his mini ATV for Christmas..only problem is I have no clue how to do electrical stuff ...guess I gotta learn

[@Freestylematt139]

How big of a hole did you have to drill for the toggle switch? Did you need to secure it in any other way?

[@malcolmclarke4709]

Why didn't u hook up the light bar to your key to let the colour of the button come on and a back up light for night while having your headlight switch to turn on n off the light bar and the switch to turn only the light bar on

[@foxracer6198]

love your videos been watching scence the beginging

[@britneyrichardson1729]

dude love thst truck

[@amitor1234]

How did you connect it? I have red and black on led bar and yellow, blue and black on my quad lights. I want to connect it to the high beam.

[@jacobstheoutlaw9066]

3D when is the light bar gonna be back on the duramax

[@15hessn]

whens the light bar for the truck going back on?

[@thecasualatvguy617]

Can those brackets be mounted anywhere on the light?? I ask because my atv has holes in the bracket 12 in use apart for a really expensive factory light bar, I can use a bigger one this way.

[@limpshady1113]

cool a new ending pic :)

[@cheesepuff8603]

Get a Polaris 450, they are the ultimate beast!

[@mathewvanbavel4041]

Literally just installed this today😂😂

[@austincavalier776]

3D what is you next four wheeler going to be

[@thagamer200]

i love the vids!!! could you please please straighten the rack on the left side of your led bar if you're facing the quad lol its bothering me xD