How to Wire an LED Light Bar Properly (Project Night Light Episode 3)

[@omerbayrak1808]

This guy is doing his job 100 times better than regular mechanics. He is working clean smart. He deserves every single penny he makes from youtube because he saves us hundreds of dollars in diy projects. We love you Chris

[@sotaboyz78941]

Lmao

[@Timsautosolutions]

Hes online you must....

[@tisaghchase]

Can't believe this video is so old and I'm seeing it for the first time. I absolutely love your videos and they have helped me maintain and diagnose my car. Fantastic work.

[@chrisfix]

Thanks a lot!

[@tisaghchase]

I'm actually considering installing a relay for my amp and crossover. Should they each have their own relay or can they be run to the same one?

[@proxyhx2075]

@@tisaghchase It'd be better if both of them had their own relays.

[@TheSoonToBeTrucker]

@@chrisfix I know this is an old video but you should do a video on the SPOD lighting control system.

[@kland086086]

Dude, I'm a mechanic, and I love your video. I put it in my favorites to use to teach people because your simple presentation is easy to understand and follow, not annoying, superb job bro. Bravo!

[@angeleaterstudios1004]

I'm gonna have to watch this like 7 times to understand the wiring process.

[@TheShonoun]

I'm about to do underglow and I'm seeing all kinds of stuff you never see in any other tutorials. I didn't know there was a fusebox on the steering rack.

[@creativejake7323]

Same about watching it like 7 times

[@petergross135]

Wiring is so easy, it’s just electricity isn’t something we can see so it’s harder to understand. So we mentally make it more difficult than it really is.

[@jackfieldsjack1061]

just buy a wiring kit.

[@Engineer9736]

@@petergross135 Running the wires sure is easy and interesting. Just be sure that you use the right size fuse and wire gauge. If you undersize it then you can set your vehicle on fire.

[@Grady_OBS]

There are some people who ride near me that leave their bright lights on (High Beams) when driving. I installed a light bar on the front of my truck (My preference ) and so far, ive only had to turn it on twice to make the other person turn theirs off. (What I do is I flash them once with my High Beams and if they dont turn theirs off, I turn my light bar on and off real quick) (Its not the proper thing to do, but it works)

[@chrisfix]

+Zipping Basher I do the same thing haha. They shut it off all the time when you use the light bar!

[@impulse9091]

+ChrisFix my buddy has a rear facing light bar for tail gaters. works every time hahha

[@kg7yts187]

Haha, where I live, people drive with their light bars on.

[@BradyPhotgraphy]

Illegal

[@Grady_OBS]

@@BradyPhotgraphy so is driving drunk or high and people still do it.

[@northofnormalofficial]

Hey Chris, just so you know, 9 years later and you’re still helping people with this video! Thanks!!

[@vinnyvidivici]

This probably the most informative and clear/concise tutorial I've seen. I was skeptical about wiring my own light bar myself, but thanks to you, I'll be probably be saving hundreds of dollars by doing it myself. Thank you for the video, Chris.

[@glenniz1]

Nearly five years later, and your video is still helping folks who love to DIY! Thanks Chris!!

[@myy_koneesi]

Just realized that this video is 7 years old, i bought a light bar and reverse lights for my truck and i just followed the steps and it works perfectly. Thank you!

[@chrisfix]

Glad to hear! Thanks!

[@noahpippin3204]

you should do a how to wire subwoofer/amp.its really easy but nobody has made a good video of it yet.

[@possum2023]

Look up Meade916 he has a lot of great videos on that subject.

[@leonpravst7860]

yessss

[@jugulartheninja]

I could do a quick runthrough of my setup that i did myself stereo, subs, 2nd battery, speaker amp and upgraded speaker wires

[@JonathanMartinez-rv9ur]

Can somebody show me to do a fuse tap into my ignition with a toggle switch for amp turn on

[@jugulartheninja]

@@JonathanMartinez-rv9ur There shouldnt be a need for a fused line for the signal wire as it operates on an extremely low current that doesnt power anything The way most would recommend you do this is to tap the signal(ON) wire leading to your stereo deck that way your amp is on when your stereo is

[@soidus]

Watched this because I'm an electrical engineer and had so much fun, despite not being a truck owner!

[@antoniadelgado8677]

Reading this made me think of a Toyota prius with a strobe light that was taped on It made me laugh harder then I should have

[@gaminggonzalez8830]

@@antoniadelgado8677 9kkkkkkkko9kk9

[@DiscoveringJapan1]

Outstanding video! So clear and easy to follow. I learned what I was looking for in the first few minutes, but the step-by-step narration was so interesting that I watched the whole thing!

[@greenhead333]

I love how detailed this video is. You explain the simplest things that probably should seem obvious. but its perfect for a guy like me that forgets everything 15 seconds after I heard it.

[@olechuga2]

Sir, for your three (3) videos in the construction of your truck's bedrails, headache rack and mounting system for your light-bar, paint job and electrical setup ... a most excellent set of informative videos. You did your major projects so simply constructed, explained so well as you were constructing them, overall paint job and electrical setup, that you made me feel I was there helping you all the way. You Sir, made it look so simple to construct this time-consuming project, yet produced such an "elegant" home-made job. Your construct ended rivaling a professional job, and yet you made it happen "your" way all-around. Your truck's lights, plus the light-bar's, makes for sone scary sunlight. You are no doubt scaring the bejesus out of all those crazy furry friends, wondering just what has happened to their world at night, and reaching for their "Kaopectate". I congratulate you Sir, for a job simply very well made, and thank you for your hard work, as published.

[@richarddannov5784]

Youre the best! I just spent the last 2 nights losing sleep because every other video I watched on the subject they said “you’ll have to get power to the switch from SOMEWHERE in the cab”. No further explanation. But you, sir, you showed exactly how to het power from the fusebox. I cannot thank you enough!

[@zachgeorge7738]

"We don't want to have spaghetti, save that for dinner." -Mr. Fix 2018

[@itsdimitriymedvedyev]

*2015

[@justabrokeredneck]

Buster McCluckle 2015*

[@echo5939]

Lol

[@angelicaamora11]

2015**

[@DuskBlazeYT]

Lol

[@3n3ly7m9]

Wow. Way to feel old, this was only from 2015............ 7 years already :( Your videos are timeless.

[@abdulelkhatib2674]

Great job as always, and I always love watching these tutorials. I highly recommend installing a switch panel and relay box in your truck instead of individual switches. I did that for my truck, and I think it looks so much better than many loose switches.

[@chrisfix]

Thanks a lot

[@JariMustafa]

Great video Chris :) no one on KZbin actually goes to such small details as you do :)

[@chrisfix]

+Mustafa Jari Thanks a lot!

[@ozgultekin6100]

+ChrisFix agreed. Keep it up, Chris! and those LEDs are crazy bright!!!!

[@mtnguy]

+Mustafa Jari completely agree. Great job on the video man

[@syd8699]

My god what an incredibly thorough and clear explanation. Thank you!!

[@chrisfix]

No problem!

[@trevorhaines954]

Chris is always good about getting to the point and explaining everything.

[@tristan_g9508]

Someone blinds you with their brights you can just obliterate their eyes in return

[@chrisfix]

I give them a warning flash first to be nice.

[@johncao8344]

Officer: "I wonder what's this red button do?" Dumb ways to die...

[@codealtf4logn779]

@@johncao8344 😭 😂

[@trevorhaines954]

@@johncao8344 Lmfao!

[@W0mpa]

Thats a small sun you put on your car ;)

[@marunio1]

:D

[@gijs.22]

Thomas Wallblom one he turned it on i sad to myself jesus christ thats some light

[@RealLifeOORA]

I am happy I found this channel. Not only is your voice clear, and camera steady, but you do an amazing job at explaining EVERY step. Really good job doing these videos

[@chrisfix]

RealLifeOORA Thanks a lot bud! Comments like this mean a lot to me!

[@nathanh.809]

Just recently acquired my dream “truck”. 1994 ford ranger XL Splash, and your truck DIY videos have given me a new passion. I hope to be able to show you how cherry she will look with a light kit on it like this! Thank you!

[@chrisfix]

That's awesome! Let me know how it goes!

[@jmasonrcingabout273]

Bloody hell! you make everything look and sound so easy. When I even try anything like this like getting power to the sub in the back of my (Ehem, micra) it ends up being a herculean battle against bulkheads and stubborn interior panels (that change their shape after removal) resulting in bloody knuckles and foul language. You should teach courses in auto maintenance and modification. Keep up the top notch vids.

[@Aviation101]

Wow. Insane intensity.

[@chrisfix]

+MrAviation101 Yea it is 40,000 lumens!

[@Beeyouarekayee8]

Intense insanity

[@Payzme13]

@muaddab world gcfccffhfjtfjfdheijohhhehfffuyvtcreih Sedgddfcd DYBUDHVCFJFFXJGCRDTUDTIVGFUCCU 🤗😃😀😗😙😚😘😍🤩🤗🙃🙂🤣😂😅😆😁😄😃😀😂

[@Payzme13]

Hyggyvtestdygvgdfzsrrfgfdsttdxdrdxruy fhffgyc

[@Payzme13]

😆😍😄😁😆😚♥️♥️♥️♥️♥️♥️♥️♥️♥️♥️💚😹👥👤👥👥💦💫💋🤦🌹🌈🐞

[@gwolf7716]

Once again, the best explanations in the business😎. I’ve been tearing my hair out trying to wire up a pair of off road lights with two relays and an unneeded switch to factory aux switches and your method of diagraming and laying out the harness produced professional results. Thank you sincerely!

[@wesselbakker936]

You know it's a ChrisFix video when it helps you even though the video is almost 6 years old. Thank you, Chris! I now have some nice Hella comet 500's mounted to my front bumper. :)

[@chrisfix]

I'm glad the video helped you! I'm sure they look awesome!

[@theiareproduction]

Nearly 3,5 years later and here I am still waiting... "How to Wire Bed Lights: COMING SOON".

[@fadelf.294]

Still no (2019)

[@WEMFTai]

2020

[@codygonither]

he did it 2020 !

[@chrisfix]

Here you go: kzbin.info/www/bejne/bWjXYoiNabaWbck

[@aksk8629]

@@chrisfix of course we can trust Chris to deliver!

[@Pelletputter]

Just wanted to say what a great video - I consider myself 'Exceedingly average' when it comes to mechanics and fixing my car, but electrics have always been a big fat "nope" as I just struggled to understand it. So much so that when I got my lightbar I paid a bloke to fit it for me, but he's used undersized wire and as it's stop working now I'll replace all the wiring so it's properly safe. Haven't done it yet, but I know when I do I'll come straight to this video as it works as a step-by-step perfectly. Thanks!

[@robertlinva9503]

Great job on this video, Chris! It was definitely the best video that I've seen showing every single step in this process. You also did a great job not only talking about how to do things, but you showed technique and the appropriate tools. Really great job.

[@TuddecBMW]

"That isn't a light, it's a collapsed sun!"

[@ozgultekin6100]

+Tuddec hahahahahahahahahah

[@pancho1684]

says Clarkson

[@rinofagerlund2371]

Top gear XD

[@syedzaynuddin9639]

Zayn

[@syedzaynuddin9639]

122222

[@apolloplanb5209]

Chris you represent old school east coast American ingenuity and integrity. Whether you're fabricating, fixing or restoring you never take shortcuts and do the job as it should be done! I also appreciate your attention to detail / OCD as it's definitely needed to complete all your videos to that level of completion. Too many lazy hater trolls on KZbin.

[@spencerhutchison3667]

When the video started I thought this would be a difficult task but you explained it so well I'm pretty sure I could do it myself! Thanks for the great video!

[@chrisfix]

Thanks

[@paulgerard6675]

I've watched since episode one! This was a great video! Lightbar came out great and as always the editing is awesome! A job well done!

[@caidencoleman9503]

I'm in college for auto (specifically electrical this quarter), and this video helped me nail which pins on the relays do what. Chris is absolutely goated. 💯

[@poldalp]

I swear to god, u are genius, keep up the good work!! (y) :)

[@chrisfix]

Thanks!

[@firechiefsampolitano1541]

Poldalp, common sense goes a long way if you have any. But considering most American males have lost that connection from learning things from their fathers.. Chris is closer to being a genius, compared to young men of the up and coming generations. Thanks for the video, Chris. Someone need to teach people basic auto care. I doubt if my kids know how to change their oil or replace a blown out tire. Not because I haven't taught them, because their cheating mother wouldn't allow it and said her PW husband could teach them... yeah that really worked.

[@therealb888]

Sam Politano lol 😂, that sure got personal!

[@TheOddest1]

I smell a r/wooooooosh here somewhere

[@josephtempleton4930]

@ChrisFix great vid. Any chance you'll be doing a dual battery setup on that Mazda, for running all that auxiliary lighting? I'd like to go that way on my F-150 and I know your step-by-step approach will be the easiest to follow.

[@ats6136]

I love the look of the mount! Great video man.

[@chrisfix]

SharperAdam Thanks a lot!

[@Vboystatus]

best straightforward wiring video on youtube for a 12v light and switch system thank you!

[@danielpindell1267]

Really impressed with your work 👍👍👍

[@Aron-ru5zk]

I’ve wired mine with a relay into my high beams with a switch in my dash wired into the light bar circuit so I can use my high beams regularly for on road driving and then with the switch on the light bar comes on with the highs

[@deaddad6310]

That's pretty big brain chief. I'm stealing it lol

[@福-g5v]

Thanks for the detailed explanation. I really want to DIY a light bar to my car and still confuse after watching others tutorial, but your vlog makes it easy for me. Thanks. Really appreciate it. Now your channel has become one of my favorite channel.

[@Trd2020]

clean work, i wish your where my mechanic

[@6RGyan]

Quite an Illuminating 😇 project. Fine job.

[@WhoKnws]

I’ve been watching his videos for at least 8 years always professional and easy to follow his instructions..and I can’t wait to get a light bar on my grand marquis

[@sarcasm2k]

Hey Chris. Your content is amazing. Your attention to detail in terms of content, filming and audio is amazing. Thanks for all the tips!

[@Tcostello]

you literally blew my mind putting that switch in the door.......

[@chrisfix]

Good idea right?

[@MachitoLFC]

Me too! Never seen that and can’t understand why, aside from being very different

[@craigsters08]

ChrisFix can u do a video on your Mazda smoke test vacuum check?

[@ASPthespeedyboy]

Toby Costello kaaboom

[@CyanRogue759]

Why not connect the fuse tape to the wire after you ran it through the door harness 🤔

[@mytexaslife3584]

Insanely helpful video. And I can't believe I'm watching it 7 years later. Thanks👍

[@mjc0961]

"We don't want to have spaghetti, save that for dinner" No idea why, but that cracked me up. 🤣

[@zebracherub]

Now, put a sticker above the switch reading "ejecting seat". You know, when you give people a ride and stuff :p And now the hardest thing is going to resist using this bar on the road at night lol. It makes things so bright, you don't want to go back to normal beams :/

[@YeetxBoi]

just turn it off when passing people, or do one like i plan on doing into the front of the truck rather than on top(this keeps it from hitting in eyes.)

[@benjaminmasters5375]

i am so doing that now, im going to get an big red button and stick it to my console that says "seat ejector" or i could do "self destruct"

[@zebracherub]

Ejecto seato, cuz!

[@bagawathytruckinginc]

zebracherub hahahahaha

[@mikushionhatsune4261]

yeaaa bud channeling that inner james bond status i see XD

[@hectorlopez1344]

I’m glad your channel exists... it’s like my very own how to be crafty dude manual... thank you for sharing your knowledge

[@davidsmalldridge870]

The off-road light bar on the roof of my dream car needs to be wired! How to do this? (CLICK) Here goes nothing! (CLICK) Hey guys ChrisFix here!

[@salvadorchh6466]

how can you make everything so perfect!

[@chrisfix]

Take your time and plan it out!

[@gagemarshall7936]

I wouldn't say I have a learning difficulty 😂 but let's just say I'm more of a hands on person you show me how it's done I'll try my best to replicate it. This bloke, really breaks it down it's great leaves no room for erra, I appreciate the videos 💯👍 makes life easy for the home (DIYS) keep up the good work mate.

[@swordsmanGFX]

i cant believe it look that good ! nice work

[@chrisfix]

Thanks a lot!

[@AntrikshNashier]

Chris bro u r seriously awsum U r tooo good at work and ur so damn technical plus inteligent and tricky U have all tricks and tips for best and all best and grt tools for alll... U r simply d best wwith funny conversation I seriously loved ur work and how u make video so damn goood... That we can all learn so easily I salute and respect u... Seriously

[@marianoespinoza4663]

I had a family member buy me a light bar for christmas and i was a little nervous going into this but man i got it all done in 2hrs thanks to this video.

[@chrisfix]

I'm glad the video helped you get it installed!

[@semdelijster4459]

Woah that makes a huge difference!! Nice job on that

[@benjaminkoll9179]

You should do a cb install no one shows vids as detailed as you do

[@Adaml_306]

This is treasure!!! Thank goodness for Chrisfix!!! I’m just starting this project on my truck!! Thanks Chris!!

[@forcefieldgaming3831]

I think Chris burnt my eye with that damn welder.....

[@ozgultekin6100]

+Forcefield Gaming ikr..... :D I was wondering if that was bad to look right into or not lol

[@mosesm.3431]

@@ozgultekin6100 naw, your screen can only get so bright.

[@Recovering_Californian]

Instead of zip ties use a few cushion clamps. They'll last longer. Looks cleaner too.

[@Tcw2019]

I’m mechanically inclined but not electrically inclined. Been watching tons of videos and yours is by far the best and simple. Thanks Chris!!

[@rolandoflores4948]

Im glad I came across this vid bro it’s gonna help me a lot plus save me some bucks I need to wire some light pods and light bars on my Polaris Ranger

[@ابداعات-ق3ظ]

Excellent job I loved it

[@BigBoyMemer]

By far the easiest to follow light bar installation tutorial out there. ILY chris fix.

[@TowMan127]

Makes me wanna do that to my truck

[@hugo-cd4rh]

TowMan127 ahh yes please

[@yuridaman]

Do it

[@KILLAFORD41]

TowMan127 same here

[@leizhang5462]

l

[@vdoxsamp7283]

JUST DO IT!

[@OlympicGaming]

well worth it, props on the project bro

[@chrisfix]

Thank you!

[@Immashift]

I am eventually going to shamelessly copy this and add other lights. Gonna do those alley ligts and a set of rear facing lights as bed lights. Planning on a CB antenna mounted on it, and if you wanna get clever with the wiring, instead of tying it to the beams you could drill and run wires inside for an ultra clean look. This setup is gonna work really well for hauling my canoe when I go camping. Just some bolt-removable posts at the back and a crossbeam and I'm set. Who needs a Thule and a Backrack? Make this yourself over a weekend. Whelp, now I have yet another reason to teach myself to weld.

[@tom69rust]

13:32, 8 wires are actually enough for 7 switches, since you only need one 12v wire from the fuse box

[@dgtlionbarger]

So multiple switches can come from the one fused power?

[@thadb9684]

dgtlionbarger yes because the wire coming out is the only thing needed to differentiate the switches

[@daltoncox3957]

Im pretty sure he put 8 wires for 4 switches to make the switches light up

[@alfredoheredia1888]

Only if he uses relays in all of the new lights

[@harryl7946]

Use star washers under your ground points. Better grounds. And match the fuse rating for what draws the energy. Get that fuse box fuse down to a 2 amp since the relay only draws millie amps.

[@planethedgehog2427]

Incorrect. Although the relay draws very little power, the fuse is for the power feed from the battery, through the relay and to the light bar.

[@gwlane5509]

Its 2018 and I’m going to use this method for my subie light bar! Thanks Chris...top notch channel!

[@ItsIdaho]

Officer: *"I wonder what's this red button do?"* *Dumb ways to die...*

[@alexhidalgo9709]

Hey Chris, any chance of doing a wiring tutorial on an audio system? Like subwoofers and amps

[@alexanderthompson1753]

Chris, I absolutely LOVE watching your vids!! They're super informative, and you cover every detail of what you're doing and why you're doing it, which, in turn, answers ALL of the questions that come along the way. Thank you for taking the time to teach us!! Keep doing what you're doing, man.

[@austinsullivan7891]

8 people are mad they have no vehicle.

[@alluserbd9359]

এক্স

[@yuriportes2606]

How can someone give the thumbs down on this?!

[@antijake4122]

austin sullivan ,olyitututyrttttttt

[@bekiro28]

plain simple assholeeesss

[@nazGONZ79]

austin sullivan stfu

[@countrylover9712]

Put a 6 inch lift kit on project night light and 35 inch tires

[@RJ-pw9ij]

austin bob calm down its only a Mazda...

[@mbdrives3541]

and a ford you know...

[@znovosad555]

+WHOS YO DADDY 8 it's the exact same thing as a ford ranger

[@RJ-pw9ij]

Zach Novosad true but how often do you see a lift kit on a Ranger? And they're already slow enough and I'm pretty sure a 6" lift and 35s wouldn't even allow it to get up to legal speed... Just sayin'

[@znovosad555]

+WHOS YO DADDY 8 a 6 inch lift maybe yeah. But a 3 inch lift and 31s would look good.

[@andrews9715]

Thank you so much! this was a great very instructive video. I have looked at loads of wiring related vids and yours is the only one that meets my Virgo standards for detail and professionalism. Hubby and I are the proud parents of a new tractor and she needs better lighting so wiring up some auxiliary LED'S will be a priority. Thank again.... warmly, Gillian

[@immortal_morty1347]

id buy a busted car just to fix it the chris fix way

[@MarseliusHelmikstøl]

Where can I buy the olastic tube?

[@brianleabo6295]

When I took class to get my electrical degree in after HVAC. The most repeated thing would be able to draw a wiring diagram and understand. Good job you doing it more than most people

[@Nick6Michael]

Was I the only one smiling throughout the video at the end?

[@chrisfix]

+Nick6Michael Haha, that is awesome and no you werent! I was smiling too! It was awesome!

[@ericstodgel2621]

+ChrisFix Awesome job very good video

[@KastaRules]

So bright it's ridiculous !!!

[@chrisfix]

+KastaRules Turns night time, into daytime!

[@KastaRules]

+ChrisFix It really is impressive! Nice video as always, master.

[@camarokurt]

He said on the first video, " This is not a cheap ebay light. "

[@nsbyband5239]

Thanks so much i was looking around so much videos about car wiring and I'm saying to my self why don't cris fix have a video on that until I searched again and found this video u made my life so much easier no other KZbin videos come close to yours

[@KeystoneProdsPA]

Hey Chris, when you wired the additional 3 switches, are you going to jump them into the same fuse box slot 17, or does each switch need it's own fuse slot?

[@JoshRJameson]

Also do they get their own relay

[@ubreakitirepairit3569]

It's better to use a different slot. The slot he is using provides 12V even when the vehicle is off, but you may want to use a different slot for something that doesn't need 12V when the vehicle is off or even more, requires a fuse of a different rating.

[@sheachopper6416]

this light bar costs $1000... damn

[@jean9910]

Yeah, I'm sure you get what you paid for but its not the right price for my project. They have cheaper led bars out there.

[@hellhound9081]

+No Name Rigid industries puts a screw every 10"

[@ozgultekin6100]

+Chris Maroney knockoff or real, thats bright as a welding machine lol

[@hellhound9081]

Ozan Gültekin I wasn't questioning the quality. I have a cheap 50$ 24" for a reverse bar that is really bright, eventually the LEDs will go out a lot quicker than Rigid.. Only reason why I know a screw over 10" is because I read that somewhere recently.

[@ozgultekin6100]

+Chris Maroney i know u werent questioning it. oh and also, all LEDs will last about the same i think.

[@karlwarnes6062]

Wish i had watched this video first,would of saved hours of head scratching watching others attempt but failing.Great explanation,thanks for making it so clear.

[@TheRealXesc]

Awesome work you are doing, I'm getting all envious, and want to do the same to my car. One question; wouldn't it have been nice to have run the wiring inside the metal bars / roof rail, rather than in a plastic tube zip-tied to the rail?

[@robbie1994frbw]

I thought that too lol

[@theking94hm]

No because then you wouldn't be able to replace the wiring easily and it would also be easier for water to get into the bars.

[@sharonjoseph5903]

S

[@ВладимирСаратов-б7к]

You're going to have a hell of a time changing your battery

[@estonianperson1112]

True

[@aaaabbbb4528]

my exact thought

[@sharkamov]

Well, there actually *_is_* only _one_ Pos. & _one_ Neg. on a car battery, so I don't really see any 'problem' . . . . .

[@lstatefarmjakel]

I know

[@yellowboy5467]

Nah, the alternator is always feeding power to the battery. So the battery will last as long as usual.

[@InterstellarFrequency]

Even though I’ve almost watched your videos, I’m back watching a older video to remind myself how to do something again. Way cool thanks for the content.

[@nycfcistrash2097]

Drink every time he says crimp

[@nycfcistrash2097]

+Brennan Callan you seem very interested in Chris

[@nycfcistrash2097]

+Brennan Callan you spend too much time writing your replies

[@cupofdiarrhea]

+Brennan Callan As someone who holds 27 college degrees and 3 WWE titles, it's cute to see someone throwing out their degree count in a KZbin conversation. If getting a degree teaches you nothing else, it's that being clear and concise in your communications with others is of paramount importance, as knowing how to communicate lets you translate that giant warehouse of knowledge into something you can relate to others (hopefully without coming across as condescending!). Being needlessly wordy or skilled in nitpicking the works of others is not the same thing as being intelligent.

[@Treehouse1230]

I'm a little late to the party here, but take a shot every time +Brennan Callan uses quotations...

[@benjaminmasters5375]

lol when i put light bars in my grille we just grounded it and took the other wire into the cab and it plugs into the cigarette lighter, simple but it works out great, especially because i hate wiring and electronics

[@alldayedcers9454]

So you just wired it to the cigarette lighter wiring or you used a plug?

[@benjaminmasters5375]

Plug, i insert a plug into the cigarette lighter which is attached right to the light bars via a long wire

[@alldayedcers9454]

Cool, and it works like a charm?

[@benjaminmasters5375]

All Day EDCers works out nicely, for a person who doesnt understand wiring and electronics well its perfect, no worrys about fuses and other stuff, just the positive wire plugging in works great

[@ZombieCakeHD]

Benjamin Masters so you just wire the positive to a plug that goes into the cigarette lighter, then grounded the light bar to your frame?

[@SteveH-TN]

While I probably won’t be installing a lightbar. I found that the information in your videos should be useful for other purposes. Thanks again for sharing your experience & thoughts.

[@chrisfix]

Glad ithelpful

[@chofyam3466]

@@chrisfix8 years later, still commenting

[@hesokayegar8259]

26:50 Look like a scene from the walking dead series 😅

[@aurelius6156]

Don’t be upsetti Have some spaghetti XD

[@MKlukowski]

8 years later, still relevant. Thank you.

[@FireCrowsWorkshop]

It's not a light bar... It's a collapsed sun!

[@chrisfix]

Fire Crow's Workshop Hahaha, I have actually found a way to harness the energy from the sun and created a light bar!

[@ahmedonal-dahbali8770]

Really really amazing videos.,the way you lay out the tools you're going to use and explaining each step slowly, the camera work and lighting in dark places under the car simply put you are the best KZbinr I really appreciate your work and you inspired me to learn more about cars as a young man from Yemen Thank you very much

[@arblineltd]

brilliant video mate, just ordered 4 for my works vans and this has simplified a massive task for myself, thanks a million brother.

[@FOREVERaPILOT]

Hey Chris, I just started watching your videos last week and i'm HOOKED! You put so much detail and thought into every project it just inspires me to do so much more work for my truck when i get back to her. Also the video editing and sound quality is better than most for sure! I installed an LED bar on my grille guard, two minis on the headache rack for full coverage and a reverse light a couple years ago with a buddy who knew a little more than me on electrical wiring. (94' F-250 with a 7.5 460 FYI) IT WAS TERRIBLE lol, before i left last year only the front LED worked and I didn't secure the wires at all. Watching your videos is great because i love to do very detail and quality work so thank you for providing amazing detailed videos to help me through the process. I am excited for all your future videos and success in the future, Good luck and thank you.