Testing out a "supposed" defective Nils Ice Auger Cutting head
Пікірлер: 20
@trailbossx22 жыл бұрын
I guarentee, he was drilling the wrong direction,,,rookie!!!!!😎
@jumpninthedarkalley6 жыл бұрын
you shoulda maxed out that auger. Where is that general area? Never seen ice that deep
@jeremiahnichols27294 жыл бұрын
How do you sharpen those blades? Ive tried angle grinder with a polishing type wheel. Whats the best tool to do it with? I cant afford a $70 head.
@ElyresortBlogspot4 жыл бұрын
Go to redrockstore.com and click on ice blade sharpening. Scroll down and find Frank Deluca's contact info. He's who you send the head (red part only) to for sharpening. You can't sharpen on your own. Special jig is used.
@davidadams84163 жыл бұрын
Where can I get an 8 inch blade for a Nils Auger!
@ElyresortBlogspot3 жыл бұрын
Contact Nils USA.
@davidadams84163 жыл бұрын
@@ElyresortBlogspot I did contact Nils USA, but they said the don't have any 8 inch blades
@ElyresortBlogspot3 жыл бұрын
@@davidadams8416 Then, they are out for the season. They usually sell out by mid-January.
@rkayser893 жыл бұрын
I got one last winter, and it takes a massive amount of downpressure to cut, even 10" down the hole. Is this operator error, or should I send the head off to Frank?
@ElyresortBlogspot3 жыл бұрын
Send it to Frank. A sharp Nils pulls the driller down the hole, almost.
@mikebudi43293 жыл бұрын
Who’s frank? My Nils 6in blade is not cutting due to hitting some ground at GE bottom of the ice ..
@matthalischuk11034 жыл бұрын
were can i get one in manitoba 9 inch
@ElyresortBlogspot4 жыл бұрын
They don't nine inch, unfortunately, and I have no idea in Canada.
@changlorderyang6 жыл бұрын
My nils can't drill straight no more keeps wobbling is it because I need to replace the head?
@ElyresortBlogspot6 жыл бұрын
No, you need to have it sharpened by Frank Deluca. It will cut like butter and cost you about $25. He's the best Nils Sharpener in the US. Go to our this link, scroll down and get his contact info: www.redrockstore.com/ice-auger-blade-sharpening-service/ice-auger-blade-sharpening
@jumpninthedarkalley6 жыл бұрын
ya sounds like one blade is sharp one is not. get replacements or get sharpened. Make sure both blades are on the same opposite tilt
@Francois_Dupont3 жыл бұрын
i got a old Finbore Normark. its got removable triangular blade and offset handles. nils isnt the only one with this design.
@ElyresortBlogspot3 жыл бұрын
Well, technically Nils is the ONLY remaining one of this design. You won't be finding a new Finnbor ever, anywhere. They don't exist.
@Francois_Dupont3 жыл бұрын
@@ElyresortBlogspot sadly. i hit some earth in the middle of my lake TWICE. those triangular blade are such a bitch to sharpen its hell. i havent tried a similar size flat blade yet. is there a big difference in cutting?
@ElyresortBlogspot3 жыл бұрын
@@Francois_Dupont I dunno. finnbore has been extinct for so long, I've never used one. Nils are tough to beat. I no longer sell them but if you can find one, get one.