For those who make tutorial content, it would be good to be clearer, and more patient when explaining ... the structure is incredible ... but it explains half and it is not understood ... but what you design is very good.
@exory_4 жыл бұрын
I agree with this!
@vpbimchannel90143 жыл бұрын
I agree too :/ my old videos were not so clear... hopefully I'm improving on that now. thanks for the feedback
@exory_3 жыл бұрын
@@vpbimchannel9014 if its not too much too ask is it possible to remake this video but improved in terms of recording and explaining ? Thankyou
@K3MU3L2 жыл бұрын
@@vpbimchannel9014 Can you redo this video please? I am trying to create this structure for my Thesis Project
@adegokekeshinro43155 жыл бұрын
Thanks for this video but this is not entirely clear, can you please expatiate on the last step of frame that works? The last stage where you explained that the frame should be hosted on adaptive points throughout is not explained to a satisfactory completion. You just created one frame and don't show how the rest of the frames will be created. I can see that this will only work by hosting the profile for each reference on each adaptive point, but how does that impact the end conditions of the whole frame when inserted into the project? Besides not all the points in this diagram are adaptive points, and the reference lines are too many? Please forgive my bluntness, I have tried this many times and I am really frustrated of the result that I get.
@pierdoro19834 жыл бұрын
you are very good. but there are toooo many passages that are not described...thanks for sharing your knowledge ....but still to complicated for me.
@dr.sudhirpatil80924 жыл бұрын
Very nice software for quickly modelling for innovative structure
@evelinam70016 жыл бұрын
I think You could plkace Your reference points on hexagonal or octagonal grid instead of square. It would made shapes get much closer to the circle shape You are after. Also placing the reference lines diagonally instead of vertically could make a big diffrence. Great skills though, I will learn from You. Thank You for this movie
@vpbimchannel90146 жыл бұрын
I will respond when I have a bit more time, but thank you for your comments!!
@rickmcgillivray61546 жыл бұрын
Hi, could you please tell me how I can intersect the revel and the top surface together? It says that I cannot do it, because it is a mesh, thanks.
@gb62126 жыл бұрын
Great video, thanks
@Klu-na6 жыл бұрын
Hello! Great, I just can't understand when you create the adaptive generic model at 20:57 when you add the profile. What kind of profile is that?
@Klu-na6 жыл бұрын
I mean did you create that profile and loaded it in or how? I can't seem to do the same.. The "Place on Face" and "Place on Work Plane" options are not available to me.
@vpbimchannel90146 жыл бұрын
That profile I'm adding is another adaptive component family with on adaptive point only and the rectangle drawn with the with and height instance parameters... let me know if this answers your question
@jeanboyable5 жыл бұрын
@@vpbimchannel9014 the adaptive point is killing me; so simple. i created a rectangular shape and assigned instances parameters but thing is when i go to place it a doesn't snap in the center of the chosen plane and i can't move it. what the deal????hlp
@jeanboyable5 жыл бұрын
Natalia nat did you figure out the profile situation; thats the only thing im missing.
@aseelad49884 жыл бұрын
please if u know how to move these adaptive points when we load it tell me cause it doesnt move and its long i dont know why
@jiangtao29904 жыл бұрын
hi why not just use spline to draw a section profile of the thing? make the spline tangent to the horizontal plane. then revolve it. then array it 3X3, and then build a flat top surface to connect to the 9 curved cone-shapes. Am I missing something here?
@sneffetsd6 жыл бұрын
But how would the constructor build this? How you pass information?
@phihungvo992 Жыл бұрын
Great!!! Thank U!!!
@serhatcetinkaplan7994 жыл бұрын
you felt me like in air bus captain .... 5 min later we will get down
@MartinMarguila4 жыл бұрын
23:00 If I pressed ESC how can I place de component again?
@bathaole11986 жыл бұрын
CẢM ƠN RẤT NHIỀU.
@liyiyelyy5 жыл бұрын
awesome, can u teach more about adaptive components? always stack for it
hi! i tried finding the metric generic model adaptive in my library but it doesn't show anything so do u know where can i download it from? any useful sites? because ive tried many and i just can't seem to download it
@@arenotalice i cant find the metric structural trusses family....any link for that? please
@arsridharsadana77346 жыл бұрын
V useful video man
@quangnguyentri65485 жыл бұрын
hey, it's very awesome tutorial, but i'm wondering that how to do with the third system of grid in this video you just did two systems of grid that rotate 90 degrees, but the original design has 3 systems of grid it's very difficult to do the third system :
@lownow8376 жыл бұрын
thanks you so much
@manalalamri13985 жыл бұрын
Which units are you using?
@manalalamri13985 жыл бұрын
And how did you set the plane?
@1362ROMULO6 жыл бұрын
Excelente, Que plugins usas ?'''''''''''''''''''''''''
@vpbimchannel90146 жыл бұрын
Eu não usei plugins - só exportei para Fusion 360 para ver a curvatura. ou estas a falar de outra coisa?
@valentinasanchez36884 жыл бұрын
que hermoso, me pregunto si estará en español en alguna parte :')
@bimtunes50703 жыл бұрын
Prometo hacerles un Tutorial de esta estructura, me gusto tambien bastante
@kritikonrazon3253 жыл бұрын
Por Mientras aqui hice otro en mi otro canal es de Revit mi otro canal kzbin.info/www/bejne/hKXFoWaditaCjq8
@damian43 жыл бұрын
Intentá activando los subtítulos y después traducir automáticamente, lo básico se va entender!
@doniaibraheem99136 жыл бұрын
after i exported to revit i couldn't devide the surface why is that
@vpbimchannel90146 жыл бұрын
Did you try selecting tab before you select the import surface? sometimes you can select a surface from the import but not the correct one (sorry for the late reply)
@ALEK_Corp3 жыл бұрын
clic on the surface if the divide button don't appear clic on tab , to select the same surface but the one that can be divide, that should work
@canweng55466 жыл бұрын
great
@thashriftippu2 жыл бұрын
Can I get the file?
@borakin6 жыл бұрын
Thank u
@حسينعلي-ث6ظ2ع10 ай бұрын
منعول الوالدين ما لكيت شكل غير نجمة سليمان علمود رأسا تركع الصفارة من الدكاترة
@pascarupang57186 жыл бұрын
thanks
@yianShineThrone5 жыл бұрын
nice
@justinmike84942 ай бұрын
your 4.00 minute is not clear.Please properly teach how the form is created on the beam line.
@MA-gx4yh6 ай бұрын
don't fall asleep
@huykhac34993 жыл бұрын
Not sure if this worked, and the most important part in the end you cut off??? the previous part you did inefficiently and was almost wasting the viewers' time