Ninja Tank Pro V2 Regulator Rebuild Kit (Pro V2 Only) - Review

[@LoveLikeaHurricane]

When do you have to rebuild the regulator?

[@Willsvrtv]

Bois i need some help i had like 11 in my v2 the correct orientation is like this correct : )()()()()( right? because it came out of box like this : ))()()()()( no i have none shp or slp it is a v2.. i always wondered why my v2 is harder to engange as my ul and all the others.. i put out all the extra blue shims down below .. i left the blue ones that where on the upper half cause they should stay there.. tell me if i can rock it like that

[@tropicthunderbolt]

Can it be adjusted wen it has air still. The rotation

[@ANSgearPaintball]

no, it has to be empty.

[@avoiding.pebbles]

why would you want to reapply grease to the regulator internals?

[@johnc8209]

Wheres a video uninstalling an old reg and installing this one?

[@BORNEO-SEMAR-DHEMIT]

Great vidio

[@maxfernandez8424]

My etek 1 reg needs to be rebuilt do u guys have any kits for that?

[@itsyaboipatrick5218]

I hear that you can use a 3000 psi reg on a 4500 bottle and convert the reg to 4500 by switching the 5k bust disc to a 7.5k is this true

[@ANSgearPaintball]

I would not recommend this for safety reasons.

[@itsyaboipatrick5218]

ANSgearPaintball ok thanks just wounding aren’t the regs built the same

[@ANSgearPaintball]

yes, but do to liability issues, I have to go on record as letting you know that it's dangerous and I don't recommend it.

[@itsyaboipatrick5218]

Ok thank you

[@Hc4697]

PB Central don’t ever try that unless you’re trying to blow your tank up lmao that’s dangerous

[@que_cocoloco3197]

What size is the dual oring s by the threads?

[@TheWetCanadian]

Just so people know removing all three shims from the prov2 regulator will bring the output pressure to 1100 to 950. Not 400 or 600

[@ANSgearPaintball]

This is the case for the SHP Pro V2 : www.ansgear.com/Ninja_Pro_V2_SHP_Series_Tank_Regulator_4500_PSI_p/ninjatank-prov2reg45shp.htm However the Standard Pro V2 Would be dropped to around 450 PSI with the shims being removed: www.ansgear.com/Ninja_Pro_V2_Series_Tank_Regulator_4500_PSI_p/ninjatank-prov2reg45.htm

[@ClipCongong]

Ship cod VietNam😍