Nintendo 3DS XL Charge Port Repair | Fix Not Charging Issue | Nintendo Restoration

[@eriknomdeplume6866]

I'm glad you made this video. It convinced me not to bother trying to fix my 3DS!

[@redpalmtree7]

Ha 👌🏻

[@RoseBaby]

Congratulations on 10,000 subscribers! We all appreciate your hard work! 👍🏻

[@TheFixTech]

Thank you for all your support!

[@snorlaxium__z6671]

Thanks for the best tutorial ever, now I feel confident enough to replace my bad charge port, it’s been out for 8 years

[@HBQV]

I’m going to try and redo my 3ds xl, it has a bad charge port and I’m replacing the shell while I’m at it. This video and your one replacing the shells will be very helpful. Thank you for the useful and easy to follow videos!

[@TheFixTech]

This model has a charge port that requires a hot air heat source to remove. Let me know if you have any questions regarding this repair.

[@xt3100]

that is why i can't get it removed. what if we only have dry flux and a dessoddering suction pump?

[@kgsxr750]

Hey what kind of board holder is that?

[@Dud_kidd]

I just learned something new thank you. Can you replace a gameboy advance sp charging port next? Im struggling a lot with my friends here and dont wanna ruin the motherboard 😅 thanks👍

[@evgenivasileuski559]

Well, it is absolutely helpful, but for guys without some equipment: u can solder without removing motherboard, just flux every point with solder and using copper wire and solder gun remove solder. Im not saying it to say this, I repaired charging port on my 3DS, and even replaced it with USB C

[@andrewvaughn1256]

Do you put it in the same place as the old one?

[@reesmundin5619]

What usb c board did you use?

[@Jacobtgoat]

Can you do one for new nintendo 2ds xl?

[@abdelatifpalestine7190]

la classe,bien filmé

[@kalenburns4190]

seems impossible to find charge port replacements. any ideas? tons of options for new 3ds but no 3ds(2011) or 3dsXL

[@TheFixTech]

You can use the new 3ds xl port, just carefully bend the solder pins up

[@jarkorino7090]

Can you help me measuring resistance r9 and r10? or someone knows the value?

[@rotebeete1267]

Use tin with a low melting point or you'll regret it.