Oh helllll no bruh I melted the shell with my heat gun and threw away my switch bro f this stuff bro not for me

Thanks a lot

Ik this is a dumb question but, does the top screen works fine without the plastic lens?

Great video! I also watched your video on how to repair the B button because my brother's 3DS XL is functional minus that and one of the shoulder buttons, and after watching this I'm pretty confident I can actually fix it instead of taking it to a repair shop.

Please let me know if this process is done in Bangalore or Hyderabad?? I would like to get it done...

my bottom screen is also broken

Nice upgrade and video. For the cost and additional points of failure from a third party product, I just don't think it would be worth doing.

Are they the same injectors for a 5.0?

Watching this after bending my 3ds xl in half because of mariokart porcodio

Thank you so much !!!!

Great Videos! Im a bit confused what diaprams to get and the conversion kid. Think you might have glossed over the switch. Good thing i re watched your video i was going to start today but didnt realize there was a different spindle socket for auto. Im attempting to change the rotors and brakes as well as the Auto to Manual switch

My buddy did this and he broke mine 😫

Hello everyone, I looking into do a leveling kit for my 84 Bronco. Any recommendations? 1.5 or 2 inch. I want a level look from front to back Thanks

My 88 f150 start UP Quick with a little misfire. Then I put it in gear and start misfiring really bad cant keep it running then shuts off does it sound like ignition module or pick UP?

Did you push the hinge in when the 3ds was closed?

What if my truck doesnt have ac I have an 86 f250 with the efi 5.0 but it didnt come with the ac setup would I have to resort to wiring it up to a manual switch?

Thank you! Great video - You saved me so much money!

Think I still have mine original autos. Think driver side is broken though. Forgot the torque spec on the manuals. Thanks for the quick and easy video. The print on the instructions is hard for me to read haha.

I just took mine apart I shouldn't lol

looks good，I hava a same ipod and try to change battery,very helpful video,thanks

Tsssss master 🎉🎉🎉

Thanks a lot!!!!

very easy thanks 😊 while replacing my top shell it appears my vendor made it a couple centimeters too big……. which is. so frustrating. a couple CENTIMETERS!!!!!!

thank you so much for your video

I thought my eve was bad. I inspected it and nothing look me wrong. It even has the newer looking brown capacitors. I assume it’s been gone through since having new capacitors in it. And I was hoping it was bad cause I can’t figure out what’s casing it to run poorly.

Happy Birthday!

Amazon says the EVR Solenoid doesn’t fit my 88 Bronco, are they just wrong?

Hi! How can I sign up for an ipod repair? I’ll purchase the battery and pay for needed tools if necessary. I just found mine from way back when and it won’t hold a charge

I ended up installing KYB gas a lot so far love it. I couldn’t get the coils though mine were so hard to get back into place even dropping the axle and taking off the sway bar bolt. I’ll tackle it some other day when I have more tools.

I have the 1990 XLT Lariat 5.0 4x4 short bed in black; really appreciate your exceptional videos!

I have a question about the washer that goes on the base of the coil spring, where you tighten to nut so the coil sits on the axle. I did a level for my truck and one side tightened all the way; mostly stiff to the truck. The other side is partially lose how on the video shows. The thread to nut ratio was the same on both sides and they both tightened on the thread but one side didn’t pull tight to the coil and the other did. Im just confused if I need to take it back apart and refigure my washer size?

Where do u buy copassuters

Dang looks like I have another thing to add to the shopping list 😅🤣, great build 🤘🤘

You're the best, I sniped a rather good looking DS lite the other day on ebay for 50 bucks incl. shipping and 8 games. The defect was that the L and R triggers wouldn't work and sure enough they didn't. Watched your guide and followed it step by step and could restore both Triggers. There was strange greenish/copper colored corrosion on it, scrapped it off and also cleaned the inside, didn't have this picker but a very thin screwdriver also did the trick. Wonder how this even happens, probably due to high humidity or something? The Unit didn't have a water damage at least, according to the sticker in the battery slot at least.

Les boutons il coûte 2$ sur aliexpress c’est se casser la tête pour rien

8:01 Nope, wrong. Do the R trigger first, otherwise you might break the rubber button for the R.

I got a new digitizer, but it feels really grainy when I run the stylus over it. It has a totally different "feel" to the original. Has anyone here found somewhere that sells digitizers that feel like the original ones? I don't want to attempt to replace my old one until I'm sure the new one I have just bought is the best option...

Next week you will be doing it again! Wheel bearing grease is bad and bearings too .

Very nice upgrade

This was a fun upgrade for my TRX-4 Blazer as mine was top heavy due to the upgraded bumpers. The brass components add unsprung weight. Let me know if you have any questions regarding this process.

I just finished doing my shell swap for my New 3ds XL using this video! Thank you so much! When i pressed the power button it did the thing where there was a blue light before shutting off with a popping sound. My heart dropped thinking I just broke my childhood 3ds but apparently I just didn't reinsert a ribbon cable correctly. Once that was done It was fine

Ummm not all models have the snap ring...1 of my hubs broke...took hubs off a wreck...they have no snap rings...

I mark the bottom of the distributor but not the top ..

Going to do this on my f250 thanks big dawg!!

I know this video is a couple years old so I'm wondering how the Injectors held up over time?

OEM parts don't matter. Everything is made in China. Even your new black fan and different motor aren't OEM. I know you wan't to be a Ford fanboy for social media but it doesn't matter when it cones to parts.

man, these screws are screwed in GOOD

Thank you very much for such a detailed guide! Unfortunately my display stood a little lower than it should. But that's my mistake) My hands are coming out of my ass 👈😄👉

i have an 88 and am thinking of getting dampers, how much did you buy to get the whole truck covered? i know this is an old video but im curious 😭

Where I can get those electric fan