Nintendo Switch | Atmosphere | RCM Jig Boot | Jailbreak/Jailbroken | Not SX OS

[@PeachGoma_Cat]

Make the wrong way... Just press power and volume up for 2 second then hold volume up and release power button will do. Before that you need to copy atmosphere file to you microsd card. Only unpatched device able to use this rcm mode.

[@zack79official60]

How about when put the RCM LOADER, got Red Colour. Nothing happen

[@monkeytrident]

Good video a tip though you should have a microphone and explain what you are doing some people will now know about injecting payloads etc.

[@gametestforreference8279]

Nintendo will report if i do that

[@monkeytrident]

@@gametestforreference8279 aha np well it comes with instructions :)

[@Marmaralone]

Whatever I do, Switch doesn't get in RCM mode. I have RCM JIG, I screwed a joycon and soldered 9. and 10th pins. I use right rail, I press and hold the volume up, and I press power button, Switch turns on everytime. It does not stay in black screen. What possible could I do wrong? Any idea?

[@gametestforreference8279]

Maybe ur device is patched

[@Marmaralone]

@@gametestforreference8279 even if it's patched, it should get in rcm mode. Also serial number says it's not patched.

[@gametestforreference8279]

@@Marmaralone check ur RCM the light must be blue, also make sure ur softwares on sd card are complete

[@Marmaralone]

At the end the rcm jig was useless, I followed a video and used an aluminum foil and a joycon and shortcutted 9th. And 10th. pins, and it worked. Not a homemade one, the fabricated rcm jig comes with RCMLoader didn't work at all and because of it's my first time, took too much time to figure it out that the problem is rcm jig 😄

[@gametestforreference8279]

Its ok, atleast u figured it out now., enjoy gaming

[@aswal50]

What if i enabled auto rcm and i use rcm loader only without using the rcm jig ?

[@gametestforreference8279]

Atmos will not load

[@leesinwei8876]

If you noob and new in jail break, please don't make this kind video, correct way :after release finger only plug in rcm loader. Your wrong method will cause other boot in sysnand

[@gametestforreference8279]

Thank You

[@adam14998]

So would this work on a patched Nintendo switch v2?

[@gametestforreference8279]

Nope

[@JhayLiporada-kt6mn]

Hi my nintendo switch is already jailbreak but I accidentally shut it down.. And it won't turn on... So I need rcm just put it on? . Then it's automatically power on without connecting to pc?

[@gametestforreference8279]

Yes you need RCM Loader for it to turn on

[@Ruzz106]

​@@gametestforreference8279do we really need the rcm loader everytime for it to open again? Or just the rcm jig and computer/android device will do?

[@Kingmationproductionz]

Do you still need to download the atmosphere file or can I just buy this and just pop it in and I have all the modded features?

[@gr3863]

Yeah as long as you buy it from the right person you can just connect it without putting any files in and yes it still works with a Rcm loader that doesn’t connect to your pc

[@JustaGuy18373]

YOU need ams files, if you dont have that and do this right away, then youre cooked 😂😂

[@homersodysseus]

Does this make your switch nodded without you getting to files and doing stuff? Just wanting to know since I want my switch to be modded.

[@gametestforreference8279]

You need to get files online

[@gplock1626]

@@gametestforreference8279 show us how

[@joaomonteirooficcial9036]

you still do need to mod your switch, the thing is that everytime you turn your switch off you would need to inject a payload using a computer or an android phone. the rcm loader is just a more simple and portable option to do so.

[@jofelfernandez483]

Can you atleast explain what you did??? Did you hold that power button? Or what

[@gametestforreference8279]

Hold volume button up

[@sokkheang548]

We need to install the file in the memory first or not

[@gametestforreference8279]

Yes put files on sd card first

[@nebulazz9298]

Does this work with newer models?

[@karlamarianafloressuarez1252]

No

[@Kerko1]

i have a question i have a banned switch and when i use this rcm loader can i unban me? and use online services again?

[@gametestforreference8279]

Impossible to unban

[@Sconechoc]

How did it get banned?

[@lindseyclarke5137]

I've mistaken updated my software To 12 something instead of the 10. Something Can I have it redone

[@gametestforreference8279]

There is a working mod for ver12

[@jillrobertson2520]

After u get payload do you need the rcm loader every time to open the switch

[@gametestforreference8279]

Yes, except from sleepmode

[@blackblack7213]

What about games that has been downloaded ? Will it disappear when u off ya switch?

[@gametestforreference8279]

@@blackblack7213 just hidden

[@retroman--]

Hidden? Is that the case of rebooting without injecting the payload? Do payloads need to be updated with new firmware releases? Thanks for showing this RCM Loader. Found them on Aliexpress. So I'll be buying an unpatched Switch and the RCM Loader/jig thus week.

[@keanjaramillo3851]

hi a question do i need a micro sd card?

[@That1Toast]

Yes

[@gametestforreference8279]

Yes off course

[@dionelcruz4226]

Is it work for none jaikbreak NS?

[@gametestforreference8279]

Unpatched

[@Nixkip]

the homebrew store doesnt load it says no internet but connection is fine

[@gametestforreference8279]

Download the updated one

[@artagle_14]

I'm so dumb at this. My RCM won't recognize my switch to the point where I'm about to give up man. 😩

[@gametestforreference8279]

What is ur serial number

[@gametestforreference8279]

Maybe ur switch is patched

[@artagle_14]

@@gametestforreference8279 My serial number is XAW10057725979

[@artagle_14]

@@gametestforreference8279 I got my switch on January 2019

[@gametestforreference8279]

@@artagle_14 check the serial online

[@edouardlhuisset7146]

need to boot every time you start the switch?

[@gametestforreference8279]

If your NS came from sleep no need

[@gametestforreference8279]

But if your NS came from power off you must boot from RCM first

[@edouardlhuisset7146]

@@gametestforreference8279 ok thank you

[@butiooo]

How to auto boot and skip the hekate ?

[@gametestforreference8279]

Make it auto rcm

[@shekiba.646]

If can cheat codes (amo, healthy, etc) for switch Nintendo?

[@gametestforreference8279]

Yes via homebrew

[@shekiba.646]

@@gametestforreference8279 Thanks

[@countrylyricist]

What is the link to buy this? It should be in the description but it's not

[@gametestforreference8279]

Shoppee

[@gabrielesuper0898]

sorry but can i do it even if my nintendo is patched?

[@gametestforreference8279]

Nope

[@allenalmonte3558]

What if my Nswitch jailbreak is accidentally off what should i do? Do i need to download a newpayload?

[@gametestforreference8279]

Just repeat everything to load the payload

[@allenalmonte3558]

Thank you very much sir. Last question. Is it okay to load a new update of pay load? Thanks and hod bless sir

[@gametestforreference8279]

@@allenalmonte3558 yes offcourse

[@estacioWIn]

My Nintendo switch it's not turning on with RCM.

[@gametestforreference8279]

Check the 12 sec boot tutorials here on youtube

[@BartonSebastiane-p8p]

Walker Carol Garcia Nancy Perez Kenneth

[@BartonSebastiane-p8p]

Thomas Richard Harris Brenda Rodriguez Charles

[@ryujin6680]

Can i know the function of doing this

[@gametestforreference8279]

Play games for free

[@lightspeed2357]

Is there anyway to reset it. My one is stuck with the blue light still on.

[@gametestforreference8279]

When it becomes low on battery it will be fixed on its own after recharging

[@lightspeed2357]

@@gametestforreference8279 Already figured it. Thanks for the reply though.

[@gametestforreference8279]

@@lightspeed2357 ok,sorry for the late reply, i am working on a ship. Internet is a burden here

[@fabioresnik6421]

Hello in all my Games i Need a update what should i do? Als what happen if i do Not Open the switch with a jig?

[@gametestforreference8279]

If there is a start software/game option just ignore... If theres none you must upd8 the game..

[@fabioresnik6421]

@@gametestforreference8279 Ah okey Thank you!! Als for what do i get the jig in what happens when i start without nix?

[@fabioresnik6421]

*Without jig

[@gametestforreference8279]

@@fabioresnik6421 if auto rcm no jig is ok,

[@jeffersonalmazan5255]

Will this work on the monster hunter rise limited edition version? Of the switch

[@gametestforreference8279]

Yes

[@VicParkerOfficial]

No it definitely will not work because this method of CFW got patched on the v2 meriko devices To be able to run CFW on v2 meriko devices you have to use and solder a mod chip onto the mainboard

[@darkchaoz04]

Hi,it is safe to use in Nintendo switch?

[@gametestforreference8279]

Yes as long as it is an unpatched unit

[@joeylawell3590]

@@gametestforreference8279 how do you know

[@gametestforreference8279]

@@joeylawell3590 i am using it

[@kdelosreyes9880]

@@gametestforreference8279 i can't use this in patched versions or v2?

[@gametestforreference8279]

@@kdelosreyes9880 unpatched only

[@seb6256]

Es que saï bon oussi pour la switch patché ?

[@gametestforreference8279]

Nope

[@SweetTodd]

What's the kid cryin' about? 💀

[@gametestforreference8279]

Not crying man, thats my son laughing when he is 6mos old..

[@nfsdaily7720]

Can you help me can I remove it or no pls respond thx

[@gametestforreference8279]

Remove it when done booting

[@realswordyt]

do you need an sd card?

[@gametestforreference8279]

Yes

[@DavidCrystal-v4s]

Audra Point

[@lucasfrommother3116]

I wish there was a way to mod a patched switch without a mod chip 🧐😧

[@gametestforreference8279]

Maybe in few yrs, just like the vita

[@NasifIstiak]

Does this work on v2 patched switch?

[@alexcooper689]

No.

[@Glit6h.1]

@@alexcooper689 why ??????

[@alexcooper689]

@@Glit6h.1 Because the v2 Switch was patched by Nintendo and doesn't support the RCM jig.

[@Glit6h.1]

@@alexcooper689 well and how to moderate the console ????

[@alexcooper689]

​@@Glit6h.1 You cannot mod the v2 switch at this time.

[@JenkinsRudolf-c6k]

Thomas Scott White Kimberly Brown Carol

[@clemmalo7]

Its legal?

[@gametestforreference8279]

Nope

[@PatrickPerez-o1b]

Clark Donald Young Karen Martinez Michelle

[@fuzzygemini2675]

all i have to do is plug in the rcm loader and that it my ns is hacked

[@gametestforreference8279]

You need to put something on you memory card

[@fuzzygemini2675]

@@gametestforreference8279 what do i need to add

[@gametestforreference8279]

@@fuzzygemini2675 atmosphere

[@christinatremble1754]

What if I bought it back and it powered off and I just bought a rcm do I need to do anythh jh in gor just follow along with video

[@LennyQUMFIF]

Does this work on latest switch firmware? (2017 MODEL, SO ITS NOT PATCHED)

[@gametestforreference8279]

Check the serial number for assurance