Nissan Altima CVT Programming after CVT Replacement (P17F1)

This shows how to reprogram a Nissan Altima CVT/ transmission after replacing it with a used transmission. In my case the TCM was setting the code P17F1.

[@fredericocorrea9814]

Thank you for the video. You were all over the place. It was very difficult to stay on track with you. I appreciate the video but maybe make an outline of the points you want to cover so you don't ramble. Thank you though. Be blessed.

[@GDWS81]

Thanks for watching! Don't forget to hit that subscribe button and ring that bell!!!

[@NelO-n7q]

I've just completely rebuilt a 2015 nissan versa cvt transmission with a remanufactured valve body, all new seals and clutches. Kept the original rom and tcm. I have an Icon t8 scanner that allows me to reset learned values, calibration, g value, cvtf deterioration. Is that good eneough to use the car or do i still need to do more? I havent used the car yet as I'm worried to damage it before its properly set up. Any and all help will be greatly appreciated. The T8 scanner does have a function for new control valve reset, but its faulty and doesnt complete the function, it freezes and hours later nothing has completed.

[@larryyoung7234]

Thanks bro. What is the model launch scan tool are u using

[@GDWS81]

@larryyoung7234 Here I'm using the Luanch X431 Mini

[@hashim_iraq]

Thank you

[@thereckchanic4709]

Did you replace the Cvt yourself ?

[@GDWS81]

Yes, I did.

[@veronicatorrence2775]

what tool or program is that your using , if i may ask

[@GDWS81]

Here I'm using the Launch X-431 mini. From my understanding some of the Autel and Topdon can do it as well.

[@traviskelly7082]

@@GDWS81 xtool d8 or d9 is a great tool as well

[@kennethmartinez9668]

Would the car drive?

[@GDWS81]

I did not do a test drive while the code was set, but I was able to move it in and out of the shop with no problem.

[@tonymawa]

to much b/s

[@janelis156]

Just wanna say thank you. I had the same issue as you and the same launch scanner. It was easy peasy thank you a million brother

[@GDWS81]

Glad it worked out for you!

[@larryyoung7234]

Thanks

[@jashimuddin660]

Boss you hide the juder code procedure

[@bisforbackside]

2017 Nissan Altima 2.5 Replaced transmission Vehicle revs fine, works great in reverse. Put into drive, moves for a second and doesn’t take any throttle. When brake is applied and throttle is given in drive, it picks up on RPM. P17F0 code for transmission CVT judder. Does the transmission need to be reprogrammed?

[@GDWS81]

I'd definitely do the programming first to see if that fixes the problem.

[@amadoudiallo7826]

Thanks so much for the education

[@indrajithkm4540]

Halo i replace torque converter for engine cuttings off while gear selecting D and R mode... After replace problem solved... But it now delay shifting d and r...and switch off again it work properly

[@MrPerrisC]

Thanks for the vid, I have a shifting problem with my cersa CVT, Is this software included with the device? if not, what's the software and hardware cost?

[@lokyblack3379]

sorry but, what model and year you are working? i know is a nissan altima but whats the year? thanks ans regards

[@GDWS81]

2012 Nissan Altima

[@azjackal]

Noted 👍

[@Chuckseese]

Blooodclatt

[@FR4087]

I recently changed my stepper motor &filter on the valve body because I got p1778 code. Now it won't go into gear. Its 2013 Nissan Maxima 3.5l with cvt transmission. I did use Castro CVT universal transmission fluid. But I can't see how the fluid can cause it to not shift into gear. 😐 need help

[@TungNguyen-gs7wq]

my car got the same problem. Did you fix it yet? please let me know how you did it. Thank you