Nissan CVT JF011E Test drive after repairs were done. Using Pressure gauge and Autel scanner

  Рет қаралды 4,908

Sunbelt Valve Body Builders

Sunbelt Valve Body Builders

Күн бұрын

Пікірлер: 15
@byuiautomotivevideos2254
@byuiautomotivevideos2254 5 ай бұрын
Just want to thank Sunbelt Transmissions for the help, guidance and parts we revieved from them in repairing a 2013 Mitsubishi Lancer. We purchase their rebuilt variators, valve body and pump. Things went together nicely. Thanks again for all the help, you are the BEST!
@northerner1374
@northerner1374 5 жыл бұрын
I had fault code p0846 and p0848 and diagnosed the fault to a bad tcm. I checked the multi plug connector on the tcm and trans and wiring continuity which were all done. I even changed the valve body with a refurbished unit which did not solve the problem. Process of elimination. It would have been nice to have to your expertise but I did use your other video to examine the original valve body for faults. I’m glad your gauge and hosing is decent as you don’t want it bursting at over 800psi 😜👍🏻
@markmangnao947
@markmangnao947 4 жыл бұрын
derek is a great person very good people at sunbelt
@qaysalshwaiyat905
@qaysalshwaiyat905 Жыл бұрын
Where did you add the pressure gauge?? Where is the test port? And what year is the car
@alextrujillo3774
@alextrujillo3774 3 жыл бұрын
Good video.thank you very good information
@ericmartell816
@ericmartell816 2 жыл бұрын
My stepper motor is maxed out at 192 at all times, just replaced it with a rostra brand unit from rock auto. What would that indicate?
@patabernathy1003
@patabernathy1003 Жыл бұрын
Hello, can I ask what kind of Guage do you have? I can only find low pressure guagues
@carstars1181
@carstars1181 Жыл бұрын
Which Model Autel scanner is that. I see it says Maxisys but, which model specifically? Thanks!!!
@mauricioparodi84
@mauricioparodi84 4 жыл бұрын
What is causing that loud whine on acceleration? is that coming from transmission?
@Sunbeltvalvebodies
@Sunbeltvalvebodies 4 жыл бұрын
Its because we have the pressure gauge on. Its normal when doing a pressure test.
@WebsterGroves09
@WebsterGroves09 3 жыл бұрын
Where'd u get that gauge?
@edwinalexander1170
@edwinalexander1170 Жыл бұрын
Why my Nissan car doesn't exceed over 100mph ????
@edwinalexander1170
@edwinalexander1170 Жыл бұрын
Why is it making a whinning noise???? And seems the car doesn't exceed 60mph .
@brianbrian3971
@brianbrian3971 2 жыл бұрын
That thing is a screamer I don't know who's going to want to drive it around town when it's going super loud wine like that
Nissan CVT FAIL @107k miles! (P1778)
15:07
Pine Hollow Auto Diagnostics
Рет қаралды 269 М.
Nissan CVT JF011E  valve body identification, tear down, and Vacuum  test.
33:20
Sunbelt Valve Body Builders
Рет қаралды 95 М.
Арыстанның айқасы, Тәуіржанның шайқасы!
25:51
QosLike / ҚосЛайк / Косылайық
Рет қаралды 699 М.
How Strong Is Tape?
00:24
Stokes Twins
Рет қаралды 86 МЛН
VIP ACCESS
00:47
Natan por Aí
Рет қаралды 30 МЛН
Jatco CVT Overhaul JF011E RE0F10a/b
1:11:36
siu automotive
Рет қаралды 428 М.
2013 Nissan Sentra CVT  disassembling a RE0F11A (JF015E)  transmission
33:48
Sunbelt Valve Body Builders
Рет қаралды 506 М.
CVT- Jatco JF011E Valve Body Inspection
12:48
Kennedy Transmission, CVT & Auto
Рет қаралды 100 М.
A DAY AS A PROGRAMMER! NISSAN CODES P17F0 & P0101 CLEAR ERASE
31:41
ADVANCED LEVEL AUTO
Рет қаралды 50 М.
Why Nissan CVTs FAIL
19:16
speedkar99
Рет қаралды 5 МЛН
Nissan CVT p0845 repair. See description for where buy parts.
15:26
Your Car Guy DR
Рет қаралды 319 М.
CVT- JF010E Disassembly and Inspection
19:00
Kennedy Transmission, CVT & Auto
Рет қаралды 268 М.
Nissan CVT7 Hghlights
25:12
Gary Ferraro
Рет қаралды 32 М.
2008 Nissan Altima  CVT JF011E Transmission tear-down and inspection (Part 3)
11:54
Sunbelt Valve Body Builders
Рет қаралды 12 М.
Арыстанның айқасы, Тәуіржанның шайқасы!
25:51
QosLike / ҚосЛайк / Косылайық
Рет қаралды 699 М.