I watched your video on the Crankshaft censor. I was able to do all of it by myself. I am a 62 year old woman. Thank you for walking me thru the process. 😊
@daviswall331910 ай бұрын
My truck is in the shop for this issue right now. Hopefully this will be the fix! Thx for the info!
@joshuaeason34262 ай бұрын
Just used this to locate the sensor on a '17 model. Same setup. ProDemand only gives a very vague description of where it is. Thanks dawg
@definedhemp9642 жыл бұрын
It's crazy how just a little sensor, like the Crankshaft Position Sensor, in the newer cars of today can keep the car from even starting or running! My wife had an '05 Hyundai Sonata, Crankshaft position sensor failed, car wouldn't start, there was 2 areas where it could possibly be, one was the easier of the two but still required the removal of the starter as it was mounted behind it. The other possible location was inside the timing belt cover, fortunately it was behind the starter, much easier than taking the timing chain cover off! I replaced it and it ran fine.
@williamarchibald98262 жыл бұрын
Aswome 😁
@jonathanmiller8977 Жыл бұрын
Is it right around the starter. I’m looking everywhere. This truck is an 04 manual transmission
@mrmonkeynuts1065 Жыл бұрын
Thanks just got back from vacation and this is the first thing I have to deal with
@Mikeywoo8111 ай бұрын
Dude same here just got back from Vegas 2hrs ago and I’m already balls deep 🤘🏽🤘🏽
@pilotdane12 жыл бұрын
Love being a part of the "WILL FIX IT! TEAM" !!!!! Cheers William :-)
@williamarchibald98262 жыл бұрын
Thanks OBI-WAN really appreciate you too ✌️😁
@armysapper12b10 ай бұрын
Glad I found this video, appreciate the help. I was having the same issue with no check engine light. I thought maybe bad fuel, pump or something on that nature.
@valanderson97392 жыл бұрын
Whaaaaats up William!! Love your fix it videos!!
@williamarchibald98262 жыл бұрын
Wassssssssssssssssup Val thanks man ✌️✌️✌️✌️✌️
@renniekennon63032 ай бұрын
Thankyou so much brother! Great help and I really appreciate it. Prayers for you brother
@supabiscuit2 жыл бұрын
Will Fix It Team checking in to show some love
@williamarchibald98262 жыл бұрын
Thanks Lesgo Brandon really, appreciate it ✌️✌️✌️😁😁
@therepairallguyssenderoplu33783 ай бұрын
Awesome video.Thank you for making it and put it in online
@AaronDBeringson Жыл бұрын
Had my crankshaft and camshaft sensors go out. However much I wanted to do it myself, I had to take it in to the shop because I didn’t have the time. Thanks for the video though
@erasamus105710 ай бұрын
can I ask around how much they charged?
@devinwoodson13658 ай бұрын
@@erasamus1057few hundred usually
@6151-k2c2 ай бұрын
@@erasamus1057if you have basic knowledge and don’t get stressed it’s easy The camshaft sensor is kind of a bitch to get out. Crankshaft pretty straight forward
@franciscorivera8152 ай бұрын
Might be a stupid question but I have a 2006 frontier 4.0.. How many camshaft sensors and crankshaft sensors does the truck have? Thanks for the help
@rynolonewolf3 ай бұрын
Don't waste your time taking out plastic inner fender. Jack up the vehicle and take the front passenger tire off. Pull the left inner plastic fender bottom out. Then I used a 13" 2x4 to prop it in between the plastic and the left side of the control A arm. The 2x4 will be pointing down to the front at an angle. There's enough room to access the rubber boot, then unplug and remove 10mm bolt. Replace crankshaft position sensor. Way faster.
@micro963 Жыл бұрын
Thank you for sharing👍👍👍I have change this sensor 3 times already. Could you please share some light about what is causing the problem and how to fix it. Thank you again
@floydherrera88983 ай бұрын
I've got a 04 frontier, is the crankshaft sensor the same side as the 05. I had the same thing happening with mine. I had the motor rebuild and everything is new spark plugs, wires, plugs new cover, but I took it out for a drive and I had to call a friend come get me and can't figure it out.
@forrest1234able6 ай бұрын
Thanks so much. Great video amigo.
@daveginter90305 ай бұрын
Great video but I was told from NAPA they have 2 in our 2012 Frontier.
@brian4816 Жыл бұрын
Thanks for the video. I have a 2016 that the sensor went bad. This, I can fix, thanks!
@nathancalderon60664 ай бұрын
Great video! would this be the same for a 2018 Nissan Frontier S?
@renedelafuente123 Жыл бұрын
Is there is crankshaft position sensor that doesn't need to be programmed for 06 Nissan frontier.
@jameswatt884111 ай бұрын
Watching it now. Having some issues common to this. Will start with the crank sensor first
@josephconnor9848 Жыл бұрын
Great explanation for the info
@karenthegoodkind2 жыл бұрын
Hi Will. So glad I saw this while looking for solutions! How awesomely wonderful you are in your craft; skilled, like an artist constructing a rare painting! I'm getting a PO340 cam sensor code on my 2000, 3.3, V6 Nissian Frontier, and P0325, knock sensor code, yet dealership code says needs transmission - 3rd gear ratio issue. Another video said distributor issue. Had towed 3 times - towing again tomorrow. Any advice, suggestions, please?
@willfixit5346 Жыл бұрын
Sorry for the late reply, have you ever gotten your problem solved. I just saw this today.
@karenthegoodkind Жыл бұрын
Hi Will. Thank you for replying. Had work done. Grateful it's running well. Been following you = oth chn a long while and this one since launched. Hope all's well with you and your family, and you all are enjoying a wonderful holiday weekend while honoring those who fell for our freedom. I'm a friend of Davenotncali. Sending all good to you and yours from here.
@micro963 Жыл бұрын
Thank you for sharing great video👍👍👍
@micro963 Жыл бұрын
Thank you for sharing I have replaced the crank shaft position sensor 3 times already. Do you know what could be causing the problem?
@charlesterrizzi8311Ай бұрын
You need to replace it at least four more times. Unleash the parts cannon, don’t be shy
@Catfishbill66 Жыл бұрын
Thanks man mine just went
@thepatriot8081 Жыл бұрын
Thank you VERY MUCH SIR !!!!!!!! Very helpful!!!!!😎🍻
@franciscorivera8152 ай бұрын
Might be a stupid question but I have a 2006 frontier 4.0.. How many camshaft sensors and crankshaft sensors does the truck have? Thanks for the help
@willfixit53462 ай бұрын
It has a cam sensor for the left and right head. It has one sensor for the crankshaft
@willfixit53462 ай бұрын
Big thanks for watching ✌️ ♥️
@franciscorivera8152 ай бұрын
@@willfixit5346 thank you for your help
@cico39462 жыл бұрын
Hello from Miami
@TimPhillips-d2p5 ай бұрын
Enjoy the info I just bought a 2006 that has an intermittent won't start some times turn the key off and then back on and it starts any ideas
@willfixit53465 ай бұрын
The IPDM gave a lot of trouble for several years. It will intermittently not power up the ecm. The check engine light in the gauge cluster not illuminating when the switch is turned on could be a sign of this. Thank you very much for watching✌️😁
@TimPhillips-d2p5 ай бұрын
@@willfixit5346 I have let the truck sit. I go out and start it once a day and it starts right up, no problems? But now the oil pressure is maxed out and the engine light is on. What do you suggest I do first. Thanks for your help.
@jcharboneau4 ай бұрын
Thanks bro!
@pandachat1483 Жыл бұрын
Thank you so much!
@xmzyno1474 Жыл бұрын
Thanks!
@tpaw69082 жыл бұрын
I saw a video that the Kentucky Speedway has 40,000 Ford new trucks parked needs the chips etc.
@haters2882 Жыл бұрын
Was that sensor 1 or no# 2 sensor on passenger side
@psanchez0528 Жыл бұрын
You are confusing two different sensor types. Camshaft (2) and crankshaft (1) in this video.
@jeffreyburnshiking11 ай бұрын
I wish you had actually showed the removal of the old sensor and the installation of the new
@lawrencebaradell Жыл бұрын
Thank you
@JakeBor Жыл бұрын
About how much is this part?
@Themarine2u2 ай бұрын
Love your channel "Thanks man carry on 🫡💪
@willfixit5346Ай бұрын
Thanks dude!!!!♥️♥️♥️✌️😁
@specialk0825998 ай бұрын
I really hope someone sees this comment - I replaced my crankshaft position sensor, but my Frontier engine is still stalling and losing power. Now it’s just doing so without throwing the P0340 code. If it wasn’t the sensor itself, what is the next logical place to look for the problem?
@warrenlindner78309 ай бұрын
My Frontier is doing the same thing except no check engine light. No stored codes.
@huntermadison69009 ай бұрын
Mine is too… no codes. Did you fix yours? Was it the crankshaft position sensor
@ac43828 ай бұрын
It’s possible for no code to show and still be the sensor. It was happening to me until it finally came on. Gonna change my sensor out today. My car started stalling when I had the ac on but not without it. Then yesterday it stalled on me a couple times even without ac. Hopefully that fixes it.
@mackmane65296 ай бұрын
Mine showed this code would take forever to start would turn over for least 10 sec before it would start up
@cotynorcross18223 ай бұрын
+1 for queso
@kevinbentley829 Жыл бұрын
so much talking. half the video just talking. get to the point man.
@davepnola5322 Жыл бұрын
How about this :
@gregorysorce1898 Жыл бұрын
God loves us. But the engine designers at Nissan do not.
@phillipskaggs7309 Жыл бұрын
my bolt broke 💀
@dwainfleming96682 жыл бұрын
I used to be a shade tree mechanic,too much electronics now. Be safe. Reeeeeeeeeee
@williamarchibald98262 жыл бұрын
Thanks Dwain will do and you be safe tooooooo ReeeeeEeEeEeEee ✌️✌️✌️✌️✌️✌️✌️