Nissan's fuel pump replacement

Thanks you for watching please like comments and subscribe and share the love
help me help you support my channel
via
PayPal - www.paypal.me/Momoboss5
cash app- cash.app/$dullahgosohard
thank you for your love and support
here is where you can get the parts amzn.to/2V8rMig

[@DULLAHGOSOHARD]

here is where you can get the parts amzn.to/2V8rMig

[@Odane_Tahir]

How much did u pay for that pump..? And was it genuine or non genuine?

[@DULLAHGOSOHARD]

It was an aftermarket pump i got the work just as good with no trouble clicking the link and put in your car info and search and you will find them with the price

[@dosal310]

Link not working

[@DULLAHGOSOHARD]

Click the link then search for your car year make and model and trim

[@ContentGamerEdits]

You’re the first one to say in your video to open the tank lid to release any pressure thanks for the information

[@BigAlWillis]

you can also remove the fuel pump relay & crank it over a couple times to relieve the pressure.

[@misterrogersclassroom]

This was a great tutorial. Exactly what I needed. I went ahead and reattached the fuse box after purging the fuel line, then unplugged the battery. Then I took out the old pump and installed the new. The metal seal was a pain to put back on. But when it was done, there was no check engine light! Thanks so much!

[@rlinmil]

great demonstration. i had a difficult time removing the rear seat bottom cushion. probably because i am 64 years old and not as strong as you. on another video the mechanic put a pan under the fuel pump when he pulled it out of the fuel tank to catch any gasoline drips. i recommend brushing off the top of the fuel pump before removing it from the tank. i would also recommend placing rags around the pump hole and on top of the seat bottom to catch any fuel spill. the gasoline fumes will stink for awhile. as an airplane mechanic i would put a baggie with an absorbent rag in it on the fuel hose to catch any drips. great job. thanks

[@jabulanirambwawasvika1683]

Thank you for the step by step tutorial on replacing fuel pump. I felt like vacuum cleaning the debris before removing the pump in case dirty fall in the open tank. Once again thank you so much.

[@gacastillo21]

Great job!! Thank you for sharing this information with us! Greetings from Texas!

[@baskinglory]

Just wanted to let you know that I’ve only ever changed a headlight in my car. I knew the issue was the fuel pump from sending videos to people of the issue. I watched this tutorial, followed your instructions, and you seriously saved me like $400. Car is running great!

[@ruly1037]

Rachael, what was your initial problem? Were you losing acceleration?

[@baskinglory]

Ruly it’s been a while, but from what I remember my car would turn over but wouldn’t start

[@ruly1037]

Rachael, thank you so much! Helps my research.

[@MiguelFlores-jp1ss]

Dulla !!! Just saw your video this morning. Replaced the fuelpump (2012 Altima 2.5s) took me more time to go to the store and get the pump than it did to put it on. THANK YOU, THANK YOU, THANK YOU!!!!

[@josephp7541]

Thank You! This explained it all. Followed the steps and was done quicker than expected.

[@paulking814]

Good job showing us how take a fuel pump stop by step

[@ronniem3592]

Excellent video ---Straight to the point . Thank you

[@TheWESTSIDE35]

Man thank you for explaining this straight to the point. You the best I will follow now for help. Most people talk for 30 min about they hair instead of the car much respect

[@dgomez409]

Heaven sent video. Awesome. Thank you!!

[@4nmusic758]

Subbed. Very good tutorial. Very well explained and good job with the camera angles. I look forward to watching more of your vids. Keep up the good work! Many thanks from NYC.

[@brandondawson8828]

Awesome video man. Helped a lot! Keep makin em

[@localgoat4176]

Thanks. Waited for a long time to see this.

[@sipwhitemocha]

When working to get out the pump metal ring thing (8:58), have your friend or sibling do the hammering on the opposite way. The metal thing we are supposed to rotate is mostly crooked so this will save tons of time. This is really the perfect and only video you need to place the fuel pump.

[@jonathanblomont9572]

Yes lets create sparks by clanking on the metal right above the fuel tank

[@LuisOrtiz-ye7sp]

Good looking out on this video. It worked on my 2011 Nissan Pathfinder. I just had to cut out a square on the metal panel with electric blade saw. Eazy and simple. No experience needed. Access is behind the driver seat. Back left passenger seat. Lift seat up.Time it took was 25 min. Thanks again for this video.

[@danlee5163]

Is this the same for a 2009 pathfinder? How did you know where to cut metal panel at to line up with fuel pump?

[@kjconstruction5816]

Getting ready to do 2005 pathfinder. How do you know how deep to cut and where the location of the pump is?

[@toyinola67]

Thanks for the info, you are super!

[@thomaswhiles1335]

VIDEO WENT HARD AF THANK U BRO

[@allenmack6468]

I liked the video it was straight to the point not like a lot of others, now some would say to disconnect ur battery before connecting the pump but that was a great video brother

[@muhamadkoschnau8545]

Thank you for this video , it's really helpful for me

[@AbdelAziz0205]

That was the best tutorial ever on youtube.

[@luigo61]

Thank you very well explained

[@chriscousinsali3740]

Very helpful video. Thank you so much.

[@aramtaha482]

Thanks a lot mate it was really help

[@mrizononi9243]

thanx for the illustration, it really helped me, much appreciated

[@metaldisturbed5880]

A perfect video, thanks so much!

[@josephbonilla5910]

Thanks brosky my car back to the road again

[@smackomackmoore1409]

Thanx for showing how two take the steps in disconnecting fuel line and plug looked at alot of videos you my man the only one that took the time two show important disconnecting the fuel line and plug

[@223twan5]

Facts

[@hhhmotorsports9550]

Great job, looks like a 10 th grader could exchange the pump. Either oem or aftermarket... great job

[@mrizononi9243]

much respect from motherland.... South Africa

[@veehall99]

Headed now to fix my 2012 Sentra. Don't know the results yet, but your video gives me hope.

[@alan4sure]

Still trying???😅

[@grilledchickenwrap]

very good and informative video. step by step instructions. awesome bud.!!

[@johnny_mo]

Thank you for this video. Doing it now, hope it helps. Fingers crossed. You def got a thumbs up from me.

[@MyTerryb]

life is really not complicated.Good Job.

[@JustRockRC]

Respect mi G, subscribed !

[@bobg6715]

Thanks for sharing, been running my 2018 Nissan Rogue with the CEL on for months now because of bad fuel temp sensor which is part of the fuel pump. Car has 161K miles and although the fuel pump still works, I think its time to get it replaced before it fails catastrophically. Your vides gives me everything I need to know to get the job done myself instead of having my shop do it. I will be buying the OEM fuel pump which will hopefully last as long as the one I am replacing.

[@gottosahani7571]

Get delfi from Rock Auto also buy the opening tool don't use metal on metal is very dangerous any spark....also put fire extinguisher handy in case of fire good luck

[@alan4sure]

The tool for Murano lock ring is $400 US.

[@bilalm4106]

thank you sooo much for the Effort

[@MoreInformation1923]

Thank you You help me allot

[@midoe.2024]

Good job, bro. Thanks ❤❤❤

[@502greenurb]

Thanks a ton!

[@hillbilly_bikerbush5684]

Great video. Very helpful. If yo spray the ring with a little WD40 before tapping on it it will come off alot easyer.

[@lclaw4233]

Great video brotha

[@BelungKak85]

Good tutorial mr....nice

[@noerodriguez5845]

Thanks so that's a great video

[@user-ky3qm2oo1d]

great video!

[@Lemon_Pilgrim]

Subbed. Thank you .

[@JamJahangeir]

I love this works ❤

[@JamJahangeir]

Good work

[@GriefPB]

Great tutorial!....and nice hammer 🤣

[@zarron221]

Great job nakama friend Shalum!

[@_spacegoat_]

Awesome, thanks. I thought I was going to have to drop the tank.

[@alickcampbell1605]

Respect!

[@ChicoDeon]

AWESOME VIDEO

[@peterodushkin8434]

Thanks man

[@ntamichael9343]

Great job

[@Sinisterspin]

To remove the 1st metal plate, some plastic oval (screws) are under a metal bracket. I used an open end 10mm box wrench to turn them. Way easier.

[@bobsteel2654]

Been trying that shit for 2 hrs useless I'm going crow bar

[@danymagana42]

Thank you👍👍

[@mansa55]

Good job yardy

[@mrdee8158]

The hardest part is putting the seat belts through the hole.. hehe. Great video!

[@praying5701]

THANK YOU VERY MUCH

[@boogstubbie1]

Very good video

[@jBurn801]

Thanks dude

[@DjTuncay19]

Thank you very much ❤❤😊

[@francescosettembre5091]

Great video and explanation. Does it works with a Nissan Qashqai J10 Diesel? I've been told that my car model has no access to the fuel pump from the back seat, and I should remove the tank growing up the car. They were not sure, I'd like to avoid to dismount the back seat :) as a side note, my car is working, but the sensor for the diesel level is not working.

[@chefrolle2865]

Thanks my brother

[@WaylonSimpson]

Thank you. Rogue is running again!

[@jayyee5216]

ALRIGHT 👍🏽 👌🏼

[@jameskagai7649]

It's good job

[@WV591]

Good points. TU

[@blackonepac]

Gd channel gd info new sub

[@tatefontenot2592]

Thanks for the video...for all those ding this...may not want to use a metal bar to loosen it. Spark + gas are no bueno...

[@abodordor3423]

Thanks

[@mrdrivermechanictv4213]

Support channel..good job

[@bahe2010utube]

Your killing me trying to take of the retaining ring 😂

[@OkazakiFragment]

So if you come across the problem with the fuel tank/pump metal locking ring not fitting flush or some metal slots are overlapping/misaligned then just use the original Green rubber O ring instead of the new one or get one similar in size to the OEM Green Rubber O ring. I came across the same problem with the new black Rubber O ring not fitting but used the original Green rubber O ring which is bigger than the new Black Rubber O ring in size and I was able to insert the metal locking ring back with no problems. (Took me 2 hours of struggling and finally comparing both Rubber O rings to release my mistake). -2010 Rogue SL AWD-

[@veroniqueh6614]

Hello, what is the name of the iron like tool you used to open the lid of the fuel pump?

[@joeprego1954]

Some good points you show in this video, but no way would I'd use a steel crowbar and steel hammer to remove the lock ring. One spark and you, the car and the building are gone. ⚡💥🔥

[@annapizza6298]

Thank you Dullah...do we need to remove any screws/bolts before taking off the back seat? Seems very difficult to take it off the way you demonstrated. I have the exact 2009 Nissan Cube

[@DULLAHGOSOHARD]

For that car yes

[@kiaamores1701]

Serias tan amable de decirme cual es la corriente de los cables y la tierra del conector ?

[@alga176]

Do I need to disconnect the battery and or other components ( electrical or not ) before replacing pump ?

[@BIGGS5699]

which year pathfinder is this? i have a 2011 is it the same location?

[@mariuspopov8680]

hi,is it the same for nissan terrano 3.0l 2004?in iceland they charge me around 2300 euros for the fuel pump and labour,is crazy really

[@alan4sure]

I think the lock ring would rotate back on easier if you put a thin film of it under the lock ring.

[@kennethwilkes5500]

What are some indicators that the fuel pump needs replacement? 2016 Nissan Altima

[@john1240able]

On my rouge fuel gauge not reading do have change fuel pump or fuel sending unit

[@bypinto3789]

Hello friend, very good video,., I have a problem with my Nissan Sentra 2016, it started throwing gas when it filled the tank, when it goes down a little it stops bouncing, it seems to me that it is from the top of the tank, do you have an idea what the problem will be with this? Thank you for your help.

[@fanaticforager6610]

🏄‍♂️ SurfiŃ thrÚ 4️⃣ knowledge, ✌🏼

[@jamrise]

I have Nissan Bluebird Sylphy 2009 G11 will the pump in your link work with my car?

[@cassidyhollis3878]

I have a question what if the car doesn't crank to let pressure off tank

[@prealpha2]

Mine has a hose, a blue wire, and a black wire going into the bottom of the assembly. Any idea what they do?

[@haybales44]

Hi I followed the instructions as you said, but when I removed the fuel line it started spraying everywhere. Please assist.

[@DULLAHGOSOHARD]

Unplug the fuel pump then crank the car when it shut off open the gas tank and then turn the key off the car make sure no lights on on the dash they remove the fuel line from the pump it will spray alittle but it will stop

[@doctorsakar]

Great job, but you shouldn't change the direction of the tubing and wires.. Because the tube will kink and also the floater will not work properly

[@DULLAHGOSOHARD]

You can only put it in one way or else the tube wont fit right

[@kalphanavong5784]

Would this be the same process for a 2016 Nissan NV 200 cargo van? My engine cranks but wont' start and it happened right after filled up my tank with gas. I had to get the vehicle towed home from the gas station.

[@chirho777]

God bless you my friend, hope you googled or found your answer someway.. my car's tank is filled also and I also had to get it towed back from my docs appt. Engine cranks but won't start.

[@leonardmedina5260]

Perfect Step by Step to remove fuel pump assembly Thank you for your support

[@johnmack85730]

What year is the Sentra? I need info on a 2018. Thanks

[@SamuRRAiGaming10]

I got a 2013 Nissan Sentra, i took it to get it checked and Car Service told me that the fuel pump needs to be change and the total cost was going to be 1.8k is that right?

[@apb38]

Great vid but it does not hurt one bit to say the model you were working on.

[@miracncografyas4690]

Adana'dan selamlar bro. I mean hi