Nissan Turbo Hardbody Update March 2019

[@jollyaustin]

These vids of the Hardbody makes me miss my 95 so much. I'd do anything to get it back. Great vids, awesome work on the truck.

[@cliftonrich697]

Very clean and nice..I'm going to go back and try to find if this is a single or dual cam ka

[@joshuacruz4046]

Clifton Rich single cam

[@claytonziemba5644]

Its a KA24 if you wanted to look into them

[@albertanosantacruzmontalvo8067]

Exelente nissan manual como debe de ser

[@benruether8294]

Sounds like a torquey little beast

[@69Bazan]

Beautiful bay

[@lh1678]

So where did you get the wheels?

[@fate300m]

What size rims are those? What did they come off of? Very clean truck!!!

[@felixzambergs3085]

I just got a 96 and it’s not quite running correctly the turbo doesn’t spool up until high rpm’s, and even then barely. Do you know how to adjust it?

[@terrancefowler755]

What kind of rims on the truck? I have 1995 Nissan hardbody

[@martinthehoghead9454]

What size wheels and tires? suspension setup?

[@CatchMeOffroad]

Check out the latest video I posted, we answer your questions.

[@thisislargemouth5566]

Junkyard cummins turbo? Or did you buy it new?

[@djgarin1]

How much does a nissan already cost with turbo?

[@drewlawlor248]

What kinda turbo an intercooler setup are you using? An how did you work the blow off valve an old return line?

[@F00MEISTER777]

Nice!! Hopefully you make more hardbody videos in the future👍🏽

[@CatchMeOffroad]

Will do my best! I'm honestly shocked they are drawing so much interest, the previous hardbody videos we made have more views than any of my other content! 😃 Thanks for the support buddy 🙏🏼

[@F00MEISTER777]

bkhaja89 That’s great to hear!! There honestly isn’t enough turbo Nissan hardbody content on KZbin considering they are very common trucks and they are cool vehicles to modify.

[@chefkarie]

Is there a build thread any where on what parts you guys used and any tip on how to do certain things. I’m looking at doing something similar myself

[@CatchMeOffroad]

Yup check out other videos on my channel. I have a few with details

[@brycebarr2838]

What's going on man what size tires and rims you have on??

[@captainburble86]

Those are wheels from a Nissan Titan/armada . It’s more than likely on a 235/45R18

[@JoseMorales-ep7id]

Where did you buy this turbo

[@willismaldonado4406]

Stock truck engine harness?

[@devonerickson2390]

Very nice lookin truck almost looks factory

[@ka.powered8328]

What turbo and turbo manifold? Also, those are some impressive torque numbers man...congrats!

[@CatchMeOffroad]

HY35 turbo and custom made exhaust manifold

[@themagnificentdork1985]

Hey, I was wondering if I should turbo my hardbody? My brother seems convinced that the ka won’t handle it, and that it’s a bad idea. While I am set on wanting to do it.

[@CatchMeOffroad]

Go for it!

[@mracidman2536]

mastov gaming that’s what most 240s run are Ka24e or de

[@brianmills8589]

KA engines have an iron block and can handle a ton of boost

[@adriancazz82]

What ECU need for you setup????

[@Thinker669]

Any mods to the rear axle?

[@matthewchandler1712]

I'm having a hard time finding wheels for my 95. But sure like the ones on urs. What kind are them and size? Thanks.

[@captainburble86]

18 inch Nissan Titan wheels

[@jameswestii454]

Any links for: Front bumper; Chrome windshield trim; Gaskets around door windows.

[@captainburble86]

eBay .

[@92Ricardordz]

How much cost a ECCS? And where you buy? Thanks

[@CatchMeOffroad]

It's a intake from 89-90 240sx

[@normanwassmaniv2593]

Did you use the d21 harness or the 240?

[@ltbravo1984]

This is the exact setup I want, is there a more extensive parts list, I'm currently working out the kinks on my trucks body but will be done by winter. I have a 95 but same color, same model. Please hit me up it would help tons. I see the 240 intake, really like this build.

[@CatchMeOffroad]

Check out my channel for other videos, we made some detailed videos and a dyno pull

[@39Woodhead]

How can I get in contact with Shane? I have questions with how he tuned with his apexi. I’m having trouble with mine. Tia

[@CatchMeOffroad]

If you tell me your question I can see if he knows the answer. He is not on KZbin much...

[@jonathan1932]

Did the truck get repainted or is that tge original paint

[@CatchMeOffroad]

That's the original paint. The clear coat is gone in some spots, looks better on camera than in person. But decent overall

[@jonathan1932]

bkhaja89 nice

[@sotheamam1244]

Well that turbo fit 1994 Nissan xe truck

[@angelx7615]

Hey I got a question what kind of computer system you got cause I'm in the process on working on a similar engine I'm just doin something basic thanks

[@CatchMeOffroad]

SAFC

[@carnellmeredith953]

What size wheels are those

[@sugarsl7551]

Is that that original motor or is that the 240xs engine

[@jesusleon8735]

It’s the OG motor the KA24E , the valve covers on the KA24E and KA24DE aren’t the same

[@internetvide0]

Can someone 6ft 3 ride in one of those? I really like that truck btw!

[@evanstrawhorn6540]

The bench seat moves all the way back and my friend is 6ft 2 and he can fit and drive it comfortably

[@josephschmier1671]

I'm 6 foot 4 270 I drive one everyday for pool cleening.

[@cliftonrich697]

6' 1" and I've been cramming myself in for 15 years.

[@ant4l-224]

What turbo should I put on a d21

[@tylerlowery6722]

I really wanna know what manifold he’s running cause I’ve looked all over and can’t find anything like it

[@CatchMeOffroad]

Did you watch our other videos? He discussed it in s couple of them

[@3E37]

I am looking into the rev9 manifold for the hardbody Look up local losers they have tons if videos on it

[@youngrunna3332]

What tires and rims

[@x3sadx3boyx3]

So how did you guys wire the Intake manifold in

[@backintogear9071]

Previous vid they said it is a ka-e from an s13 240sx..which those are stronger than the hardbody ka-e

[@ElGhostPresents]

What wheels are those?

[@triniboy3659]

Does it have a/c

[@marklsx9826]

No i have one and the ac compressor is gone so no ac

[@nickhinze9198]

Where did he get that cap to cover the antenna hole on the passenger fender?

[@CatchMeOffroad]

He ordered it from the dealer. It's a radio delete intended for trucks that don't come with a factory radio. Hope that helps

[@ka.powered8328]

What are u using for tuning? (Ecu, safc etc.)

[@CatchMeOffroad]

Check out my other older video, it shows all those details 👍🏼

[@Sidewayzzzz]

KA.Powered 1j

[@enriquelopez8500]

what is the value of a truck like this, stock?

[@CatchMeOffroad]

A few thousand dollars, maybe 1500-3500 depending on the condition

[@ant4l-224]

What kind of turbo did you put or did u put one for a 240sx

[@CatchMeOffroad]

HY35 turbo from a cummins diesel. Please watch my other hardbody videos for all of the build details.

[@ant4l-224]

bkhaja89 thx

[@ant4l-224]

bkhaja89 did you have to put new fuel pumps and injectors

[@CatchMeOffroad]

@@ant4l-224 check out my other hardbody videos, I give all the details on the build 👍🏼

[@dannycaminero1630]

Great video, i was wondering if maybe you guys can make a video of all the stuff you removed from the engine and if it made a difference

[@CatchMeOffroad]

Thanks for the feedback! What are you referring to specifically? We have a video discussing all the mods done to the truck, have you seen it? It's from a couple years ago I believe.

[@dannycaminero1630]

@@CatchMeOffroad it kinda looks like your only using one belt from what I can see and your ac looks like its missing

[@CatchMeOffroad]

@@dannycaminero1630 the engine only came with 1 belt. And A/C was deleted because the lines were interfering with the turbo manifold

[@julianpena5984]

Esta bien chingona

[@Abraham-mz1cb]

what are the seats he has in the truck from ?

[@CatchMeOffroad]

Newer pathfinder

[@ka.powered8328]

How much psi? And is it ALL stock internals? (Pistons, rods etc.)

[@benruether8294]

I really want to know too. I got some major inspiration for a build :)

[@benruether8294]

He said he's running 18 to 20 psi

[@huckinhaakon]

Is that a 240 intake ?

[@CatchMeOffroad]

Yes it is 89-90

[@hudboys8120]

Any fabrications made to fit?

[@huckinhaakon]

What kinda fuel management

[@CatchMeOffroad]

Check out this video, it will answer all of your questions kzbin.info/www/bejne/fZzdmKqarMmhpqM

[@sipmeister3611]

very nice

[@larryiniguez3307]

What zize of rims and tires you have on it

[@jackweeder2638]

18x8 OE Part Number: 40300ZH59A

[@CatchMeOffroad]

Answered this question in the latest hardbody video 👍🏼 sorry for the delay

[@eddysandoval2068]

Nice truck how can i get the number to ur mechanic because im very interested in doing the same on mine and around how much is the cost for doing something like that to my truck

[@CatchMeOffroad]

Hi, the truck is owned by my friend Shane who is in the video. He did all the work himself. Please check out our other videos for more information on the build.

[@TheGdspruill]

Love my 95

[@georgeanderson4979]

Why not just sr20 it?

[@MrMrWife]

Because an Sr swap would cost more also to be clear srs are cool and all but a turbo ka will always win

[@jesusleon8735]

Probably just trying to keep it simple not crazy on power , plus reliablity a KA motor is far more reliable

[@georgeanderson4979]

Sr's bolt in with silvia cross member. KA is far less common where we live. SR is superior

[@ronnyh7233]

Beautiful stance. 3" or 4" blocks?

[@CatchMeOffroad]

Check out the latest hardbody video, your question was answered 👍🏼

[@BronkStang]

i dig it alot, check out my turbo hb when you get a sec

[@michaelsanchez5607]

👍👍👍👍👍👍👍👊👊👊👊👊👊👊

[@CommodeToad]

I wish I knew how to work on vehicles....

[@ProjectMiniTruck]

Thing is really clean , you should check out mine 😘

[@weekendhomeprojects]

Us common folk don't stand a chance.

[@scottybarnett3957]

Water/ meth bro

[@ИванЯкутск-е1ь]

Я такую же недомашину тут в якутии купил только из-за дешевизны. Не понимаю я вас🤦‍♂️зачем вам в USA! нужна такая машина хоть и тюнинговая! ? Был бы я у вас купил бы DODGE, Ford F150 или Toyota hilux накрайняк 🤔

[@willismaldonado4406]

What size are the tires ??

[@andrewvancil6193]

What wheels are these?