Nitro RC Traxxas Revvo 3.3 Will It Run? Part 1

Will this traxxas run?
Please check out my Wish list and anything you may send me will leave me eternally grateful ;)
Rusty's Amazon Wish List: amzn.eu/3TJm7Rf
You can help me make better content by donating Via PayPal as a gift to [e-mail]!
Or you can use this link: paypal.me/Rust...
Every penny that is donated will go into making good quality videos for all my loyal subscribers!
Many thanks to you all :)
#Nitro #RCCar #NitroRC

[@aaronm7085]

These will it start videos are so interesting

[@HaggardRC]

Thanks :)

[@DoRC]

The main advantage to starving the engine from fuel rather than blocking the exhaust is that you don't end up with a bunch of unburned fuel sitting in the engine. If the engine sits for a while like that the unburned fuel can be corrosive.

[@markgault01]

Sounded like the one way bearing was slipping.

[@HaggardRC]

Yeah, very common... wait until you see tomorrow’s part 2 lol 😂

[@logangrilliotvlogs3538]

I LITERALLY THOUGHT THE SAME THING lol

[@tibyesss1126]

Your engine has a bad noise, its your main bearring, and your lsn is leann try to reach it 1.5turn, I.fixed this problem with this, and same fuel.

[@HaggardRC]

Nah I gave it back to him, the cod rod was bent.

[@peterrogers1616]

You do have some dodgy slang buddy, then backed up by the finest blowing job ever witnessed on KZbin. Cheers

[@HaggardRC]

Dodgy slang haha what did I say?

[@dazspurs9899]

I just bought a used kyosho neo inferno 3.0 for £80 it's looks in good condition haven't run it yet hopefully it's not a basket case 😂

[@logangrilliotvlogs3538]

It's a 3.3 they are very not well made engines imo I have a 3.3 tmaxx but it's modded with a os 21tm small block in it

[@Ben-dj1bu]

Let it run 😆 WOW

[@richcarrier1947]

Maybe she was a bit lean

[@kylesimpson-kpjrcracing2834]

One way bearing is going. People use the pincher because when you stick you're finger over the exhaust the fuel returns to engine. The pincher stops that from happening. With the blue wire as long as the light comes on on the wand for it it's working. Also take the glow plug out attach it to the blue wire and turn over the engine with ez start. Also with the tuning on this 3.3 engine the hsn is 4 and a half turns out (stock) and the lsn is flush with the carb :) I had a Revo with starting problems but once I took apart the engine and carb cleaned them both out and replaced parts it worked!! Hope this helps!! :)

[@RC-BashersE3]

lol... just saw my name aaron in the comments and thought someone was talking to me ffs

[@jeffmaddox5108]

Bad move always pull down eng if it has not run now it has no compression

[@samsonight2721]

U always want a glow ignitor that ez start wire garbage ez start my ass hard start

[@RC-BashersE3]

those traxxas ezstart system look so appealing

[@adamkeene6371]

I'd say thats possibly not the nitro car you want if your gonna to get into the hobby. Although they are good kits, there's just too much going on there for a beginner.

[@DYLLY0456]

Agreed

[@Ben-dj1bu]

See that smoke 😆 it's done

[@bigknoxy4210]

Can you do a tour of your workshop? I am moving house soon and I will be building a workshop in the garden. I just need some ideas

[@HaggardRC]

Well, I haven't really got much just a bench with some mess on it lol.

[@atkracing]

Does your have reverse?

[@charlesmcgehee3227]

One of my favorite engines. The car looks like it has run very little. Don't like that smoke seeping out of the exhaust while trying to start. Good attempt. They really run once everything is set right. I personally make smaller adjustments when I have a fuel flow issue.

[@HaggardRC]

Well this one had terminal engine failure lol.

[@ontariodoublex2713]

Runs horrible lol

[@jesantospotter2737]

Sounds like the ezstart seized

[@sam97eck]

Great video 👍👍

[@rc_teo_nade_216]

You have a prob with the ez start gears

[@GiantsFan1734]

That smoke out of the back looks bad😬

[@HaggardRC]

Haha!

[@LawrenceTimme]

This will be interesting 👍

[@anthonycrompton1980]

Neada a block of wood to sit it on with wheels off the ground , get it running for a fair while before playing with the throttle ,might just nead a good warm up and clear out

[@HaggardRC]

You’ll change your mind after you see tomorrow’s part 2 lol

[@anthonycrompton1980]

@@HaggardRC part 2 was unexpected ...

[@tibyesss1126]

He just need new bearring(s).

[@Ben-dj1bu]

Hey ulaw 😆

[@DYLLY0456]

He says hello you lot lol

[@ryanpitt4633]

Very informative keep em coming mate 👍

[@richcarrier1947]

A spanner-_- lol