no drilling required Grab Bar installation - How to Install

[@weenerdoggs]

Sehr gut!!!!

[@HAIRHOLIC_1]

This guy sounds exactly like klaus the fish from American dad 😂😭

[@drpat22]

I neglected to put the bar exactly as I held it while putting the pads in place (must have turned the bar around). Now, all the screws fit the top shield, but 2 won't screw into the bottom. I have to remove the pads now? Will try reversing the bar first & then call a strong relative bc you say I must use Channel locks to remove the pads. Yes, you sent a new set of pads and glue.

[@nodrillingrequired]

You can purchase the full range at www.nodrillingrequired.com. The costs vary depending on size and finish. We offer 6 sizes 12" - 42" and 6 finishes well as two different bar diameters (1-1/4" and 1-1/2")

[@timbasil5264]

How can it support weight but be easily removed?

[@nodrillingrequired]

The adhesive used is a German silicone based adhesive used in auto and airline assembly. It is unique as it maintains the original properties and nevers hardens or cracks for a lifetime. It is designeed to fracture under torsion which is how you are able to remove this without damage.

[@cherylguzman2411]

It works!!!! I've bought the towel bar kit and I used 2 heavy towels and it's still solid after 6 years. I've jerked on it and it doesn't budge.

[@Mm-jo3cm]

Will it work on wood surfaces like doorway frames?

[@nodrillingrequired]

You can mount on wood but it must be unpainted as otherwise the bond is only made to the paint and not the wood.

[@nodrillingrequired]

The system does work on wood provided it is unpainted/stained.

[@michaelharrison4102]

The adapter appears to be MDF ( medium density fibreboard). Would this not decay and fall apart in a shower environment?

[@nodrillingrequired]

Michael - The adapters are actually made of solid brass material which is specially prepared to provide strength and ability to cure the special adhesive we use.

[@michaelharrison4102]

Ken D Thanks Ken. That’s good news

[@richardshultz8512]

where to get more adhesive where can I get this?

[@nodrillingrequired]

www.nodrillingrequired.com/product-p/gluetube-bl.htm

[@KeeKeeNice]

come thru Germany!!

[@bobbydewitt5085]

How much weight do they support?

[@nodrillingrequired]

The nie wieder bohren grab bars are ADA compliant and rateed at 250lbs.

[@marsbarsgarcia6869]

Our shower has a hard plastic like wall and was wondering if this would work? It's an old mobile home and the shower wall kit sounds hollow in the back. Don't know if it has wood beams or dry wall to support a grab bar. I need a grab bar to pull myself up from a shower seat to get out of the shower. I need strong support. Pls. advise. Also, where can I buy this product?

[@nodrillingrequired]

The nie wieder bohren adhesive does work on most plastics, fiberglass and acrylic surfaces. For use with Grab Bars however we do not recommend or warranty due to ADA requirements. These surfaces are varied in thickness, construction and condition and ADA requires that the surface be able to hold a minimum of 250lbs. Fiberglass surfaces are often molded with a slow radius for strength and our system must have a flat surface to ensure there is no long term surface tension on the adhesive. There are several options for your application and would be happy to discuss if you call us through our site. Thanks!

[@disguntled]

How can I get this in the UK?

[@nodrillingrequired]

I think there is a distributor in the UK called Redhat. You can call or email nie wieder bohren to confirm

[@ThreePhaseHigh]

Does it work on fiberglass showers?

[@nodrillingrequired]

The nie wieder bohren adhesive does work on most plastics, fiberglass and acrylic surfaces but is not recommended or warrantied for use with grab bars on these surfaces. We have not tested all materials and they also vary in installation type (wall sheets, surrounds), flatness of material, rigidity and condition. These surfaces are also difficult to properly clean well enough to get a proper bond need for ADA requirements.

[@terrancewilson4873]

Where do I get this product? What are the costs?

[@nodrillingrequired]

terrance wilson You can view all our products at www.nodrillingrequired.com/

[@terrancewilson4873]

Dont need yet. When i do. Will get! Great product. Should be in big box stores. I could be your rep in the States! Ready to sell it!

[@nodrillingrequired]

You can purchase at www.nodrillingrequired.com or at various Tile & Bath Showrooms across the US