No more iron on edge banding

[@dahut3614]

What, no $81 Festool scraper?

[@AnthonyScolaro1]

Not needed in my opinion

[@juanmallqui9309]

@@debandmike3380 time is money. if you are a cabinet maker and you can edgeband with this tool in a fraction of the time it takes to use an iron, its a no brainer.

[@JV-cu3tx]

if you are a cabinetmaker, you are using actual edge banding machines. @@juanmallqui9309

[@smooth_ops2942]

​@@juanmallqui9309hope the time you save is worth the $6000 for all that edge banding equipment. A hot iron and pre glued edge banding can be done pretty quickly if you have done alot of it 👍🏻.

[@AnthonyScolaro1]

@smooth_ops2942 I do over 5000 feet of edge banding per year, you’re not doing that with an iron and making any money my friend.

[@Pimpmedown]

today i had to edge with 2mm Walnut. That was a big fail. I kept cracking because the outlets direction is too steep for hardwood. 1mm oak is fine but 2mm is getting a big pain. lots of sanding afterwards to get a smooth edge

[@zubersmail8034]

❤

[@isaivlog5272]

3000 $ for this 😮

[@AnthonyScolaro1]

I’ve had it now for about 2 years and ran almost 10,000 linear feet of edge banding and yes it’s worth every penny.

[@crownmoldingbyspectaculart941]

@@AnthonyScolaro1Love mine