NO NITRIC ACID GOLD RECOVERY | GOLD RECOVERY WITHOUT NITRIC ACID | GOLD RECOVERY

[@williamwahlert8414]

not only are your videos educational and inspirational. but the aftermath of your videos in the comments section continues the education from you and other KZbin users. i am glad i have come across your channel and you sir are inspired me to re think my current recycling operation. in that i thank you.

[@PoorMiners321]

Than you very much..

[@QueenSavage1030]

Im not a scientist or a science nerd but this was very educational thank you. To much for me to do by myself with the knowledge i have. Good video i liked.

[@PoorMiners321]

Thank you very much❤

[@igorotigoy2209]

Good job sir at salamat sa binabahagi mong karunongan👍🏽

[@PoorMiners321]

Salamat pod brad..

[@kenreed1467]

Pro tip: First, a hot water and sodium hydroxide mixture (lye) will remove the green paint on the board exposing the copper (and sometimes gold) underneath. Second, adding an aquarium air bubbler to your solution (under your boards) will speed up the process and make it more efficient adding the needed oxygen molecules. The only problem you will have is when there is silver on the boards and your copper chloride turns blue. I actually drop the copper out of the solution afterwards and melt it into ingots.

[@PoorMiners321]

Thanks of your tips..

[@gerryrussell3073]

first timer here, I plan to remove the green mask from all my gold plated boards using lye first, what do i use to remove all the gold masking? and my plan is to save all my gold foils only. Also what is the best for my pins and misc low grade gold? should i use the electrolysis method ? or the vinegar, salt hydrogen peroxide solution?

[@PoorMiners321]

By removing green mask use lye or sodium hydroxide, for extraction of gold foils copper chloride is working better also cheaper than nitric acid, for your low grade pins, copper chloride is work also but taking time, leaching is better if you have knowledge of iodide leaching..

[@broomandmopmop]

i actually found when i did my ap that using 2 buckets helped with drilled holes in bottom so you can let the foils fall to bottom and helps with bubbler thought i was only one doin that lol

[@PoorMiners321]

@broomandmopmop thanks brother

[@TheBlackstag1]

You are very wise thanks for sharing your way of doing it its fantastic thank you

[@PoorMiners321]

Thanks❤

[@nazanintorabi1406]

Thanks and Love you from Iran

[@PoorMiners321]

THANKS

[@franguimfrangoso104]

Show show show Parabéns guerreiro 👏👏👏 Um abraço do Brasil 🇧🇷💎⛏️

[@PoorMiners321]

Thank you..

[@junlee993]

Hello, I'm sorry to keep asking questions. Are there other products that are readily available in ordinary households that can replace hydrochloric acid or sulfite It's very hard to get here.

[@PoorMiners321]

Thats okay bro, hydrochloric acid is a common name muriatic which availble in many places brother, and about sulfite, you can find it on the internet try it

[@junlee993]

@@PoorMiners321 Is it hydrochloric acid that is used to clean the toilet?

[@PoorMiners321]

Yes exactly..

[@junlee993]

@@PoorMiners321 oh my god. thankyou

[@ZERO-th6dd]

​@junlee993 also used to clean concrete floors

[@gaferalip]

How many kilo boards did u have been refining

[@BdbebrDhdhd-dy1tq]

Ban lam ket tua paladium va palatinum minh ung ho ban rat nhieu cam on

[@PoorMiners321]

Brother I can't translate your comment, maybe this is local language you use, can you please use your national language so I can translate it

[@greyson042290]

Salamat Idol sa pagtuturo ng pag extract ng ginto sa mga PCBs! marami na kong na ipong ganito at salamat sa tutorial.... suggest ko lang ay gawin mong madali ang pagtuturo may caption bawat process

[@PoorMiners321]

Okay idol salamat din.. at hanapin monlang yung cc sa screen while nag play ang video click monlang yung cc may caption yun,

[@WINSTONCABALLA]

sir sana po mapasin moko gusto ko din po magaya ang pag process mo😊 p.m. back po sana idol

[@PoorMiners321]

Hanapin ko ko sa ibang sosial media

[@yavuzozturk9655]

Kral su’yunu karbonatla inceltebilirmiyim veya baska bir madde ile?(tesekkurler)

[@PoorMiners321]

Hintçe, hidroklorik asitte nötralize edilmiş nitrik asidi mag'da genç dalawang kimyasallarını çökelterek, hidroklorik asitte nitrik asiti ve salitayı mamamatay ve nitrik asidi buz veya soğuk suyla seyreltin.

[@yavuzozturk9655]

@@PoorMiners321 buz ve soguk su ,kral suyu’nu seyreltir mi?

[@vadermasktruth]

I like this a lot! Cheers from Detroit!

[@PoorMiners321]

Thank you

[@DASMARKUSS]

BLESSES FROM ARGENTINA 😊❤ GOOD VIDEO

[@PoorMiners321]

Thanks❤

[@keiverdejesusblancorodrigu9265]

Excelente amigo cuanta placa usaste

[@PoorMiners321]

obrigado amigo, não contei quantas peças eram, mas eram perto de três quilos

[@Nordic-7]

Great video! Greetings Whats the chemical list I need for this? Thank you so much!

[@PoorMiners321]

visit some of my video

[@Nordic-7]

Yes but im not understand english too much. Can you write me whats chemical I need?

[@PoorMiners321]

1. HNO3 nitric acid, 2. hcl hydrochloric acid know as muriatic acid, 3. sodium meta bisulfite smb, 4. urea fertelizer.

[@kamikazetom9785]

​@@PoorMiners321 i thought this video is without Nitric acid ? I saw only Hcl and bleach and at the end little bit MBS and borax

[@userMarat77-]

​​@@PoorMiners321знаете как делать в домашних условиях азотную и соляную кислоты? Могу научить если вам это интересно

[@YoelFlorian]

Hola amigo.saludos desde peru.yo hago todo el proceso , tal como tu lo haces pero al momento de fundir (son 2 veces) no queda nada de oro y la última vez me quedo una pieza negrita 😢. Puedes decirme tu en que estaria fallando si uso todos los quimicos mencionados. Agradesco tu respuesta porque me fustra invertir algo de dinero pero no encuentro la ganancia aun 😅

[@PoorMiners321]

Perdón por la respuesta tan larga, creo que el proceso de lavado de la precipitación es incorrecto aquí. ¿Lavaste la precipitación una y otra vez con agua destilada? tal vez unas cuatro veces? ¿Y luego lavado con ácido clorhídrico?

[@YoelFlorian]

@@PoorMiners321 la verdad solo lo lave 1 vez .entonces debo lavarlo 3 veces con agua destilada y una cuarta con acido clorhidrico. Gracias voy hacerlo como me indicas y te contaré que sucedió.😉

[@victorcordova1274]

Muy buen video, cuantos kilos de placas de celukar habían?

[@PoorMiners321]

1.5 kilo grams high grade old mobile phone

[@fatimaazahra659]

Wao...Thanks very muts from indinesia 🙏🙏🙏

[@PoorMiners321]

welcome bro..thank you

[@novonovo7544]

Bahan baku batu mas cocok tu byk SMA sya

[@dizzious]

5:30 what liquid is that? Hexane?

[@PoorMiners321]

Copper chloride, dissolved copper in hydrochloric acid.

[@junlee993]

내가 찾던 영상이네요 고민이 많았는데 감사 합니다

[@PoorMiners321]

Thanks..

[@PoorMiners321]

Thank you..

[@harryniedecken5321]

Since all of the gold is on the surface of the boards, I wonder if it could be recovered mechanically or by reverse electroplating?

[@PoorMiners321]

Reverse electro plating is difficult for that type of scrap, Chemical extraction is better, like Acid peroxide or nitric acid,

[@harryniedecken5321]

​@@PoorMiners321 What do you think about using an electric sander to remove the top metal layer of copper, alloys and gold? Dissolve this dust into the copper etch acid. Perhaps electroplated out the copper, etc onto a carbon rod. I might be wrong, but I think the gold would concentrate as precipitation. It has been a long time since I thought about these things so my electro chemistry is weak.

[@PoorMiners321]

Yeah thats also good Idea, but the problem you encounter here is the fiber, the fiber you can grind it too because gold plated and copper clad is very thin I'm sure you grind the fiber also at the same size to gold plated and also copper clad, and the result the current doesn't flow correctly.

[@harryniedecken5321]

@@PoorMiners321 Thank you for that very practical experience. The only ways that I can think of to remove glass fibers are HF, NaOH, and very fine filters or maybe a centrifuge

[@andalucianarts8666]

Hi Bro, whats the quemical you use before peroxide?

[@PoorMiners321]

That is my old acid peroxide solution, then I add fresh muriatic acid to dilute saturated solution then I add small amount of hydrogen peroxide

[@andalucianarts8666]

@@PoorMiners321 Thanks Brother and great vids very addictive to watch 👍👌👌

[@xbidb]

Very good job my friend. Warm greetings from Germany👌👍🤝

[@chh1318]

Und machen wir morgen nach ? 🙂

[@PoorMiners321]

Thank you sir..

[@xbidb]

@@chh1318 kennen wir uns?? 🤔 Ne, morgen noch nicht 😅 obwohl.... Vieleicht doch 🤣

[@kamikazetom9785]

​@@xbidb hat der Salzsäure erhitz und mit Bleiche das Gold zersetzt oder bin ich doof 😅

[@HainahImam]

Boss alin ang masmagandang gamitin sa pag tunaw ng gold foil hydrogen peroxide o zonrox para mabilis matunaw ang gold foil

[@PoorMiners321]

Yung dalawang procedure boss maganda pero yung dalawang yan mahirap e precipitate ang gold boss may process na kailangan malaman

[@HainahImam]

@@PoorMiners321 ano yun boss para maka recover din ako ng gold sa mga board ng celphone at mga pins....

[@MotorhomeDIY]

Hello my first time going to try with 1kg gold ram fingers Which way would you recommend I do this being the easy and cheapest method? I was thinking of getting gold flakes off green card with solder gun Then onto some solution to melt copper nickel? Opinions please Thanks

[@PoorMiners321]

Yes I recommend you this method, don't use heat gun to extract gold flake, then I recommend you also to precpitate using Iron sulfate it is very effective as precipitant

[@MotorhomeDIY]

@@PoorMiners321 thank you I will try duplicate every step you took here then I’m from the uk and wanted to ask your thoughts on ram fingers being sold at £70 for 650 gram I think this very high considering the total gold amount pulled from 650 gram

[@rickywashburn4858]

What are you putting after the copper chloride I can't understand what you're saying

[@PoorMiners321]

I well review our video then I get you back

[@laurisValmiera]

I put vinegar and hydrogen peroxyd and salt In, first hours it was get getting blue after 12hours all my liquid is BROWN? ITS COOPER FAULT ? BECAUSE IN PHONE DETAILS WAS COPPER TO. What i done wrong ? 2 days and no gold is seperate ? WHY

[@PoorMiners321]

Maybe you are dissolving your gold, base metal, also a little bit of fiber.. filter your solution, the remaining resedue keep it, then the solution you filtered add smb to precipitate gold on it,

[@PoorMiners321]

And your remaining resedue have gold in it precipitate through copper base metal, so you need to dissolve it in aqua regia then precipitate gold using smb

[@userMarat77-]

​@@PoorMiners321 осадить можно и железным купоросом осадить, лучше будет кагулироваться осадок, и не будет мелкой пыли при осаждении...

[@dalencar1016]

how do you make this copper solution for extraction friend give me a tip I have a lot of electric ic chips semi jewelry pinning

[@PoorMiners321]

muito obrigado por assistir meu video mano, para fazer uma solução de cloreto de cobre, você fará isso passo 1. obter 1/4 kg de fio de cobre passo 2. preparar 1 litro de ácido muriático ou ácido clorídrico, passo 3. mergulhe o fio de cobre em ácido muriático ou ácido clorídrico 29% ou mais concentração, por uma semana ou mais até que todo o cobre derreta e é quando todo o cobre derreter primeiro você pode usá-lo

[@Khusringoldminers]

Mantap kreeen banget bosqu

[@PoorMiners321]

Terima kasih bos

[@keiverdejesusblancorodrigu9265]

Hola amigo saludos tengo un problema a la hora de precipitar el oro le hecho metalbisufito pero no cambia de color como tiene que ser.y eso que caliento la solución

[@PoorMiners321]

lo que hay que hacer aquí es forzarlo a precipitar poniendo polvo de zinc metálico. luego filtre todo lo que precipitó y disuélvalo nuevamente en agua regia, consejos para hacer agua regia no mezcle directamente una proporción de 3: 1, siga este ... cubra todo lo que capturó precipitado con ácido clorhídrico, luego póngalo en calor y luego agregue nítrico lentamente ácido si ves que todos se disuelven entonces deja de agregar.

[@PoorMiners321]

si no tiene ácido nítrico, agregue hidróxido de sodio, siga agregando hasta que no haya reacción en la solución, luego deje que se asiente toda la precipitación, luego filtre, seque y cubra con ácido clorhídrico, luego agregue lentamente hidrógeno peróxido al 3% o 6% hasta que se disuelva nuevamente, luego filtrar nuevamente,

[@PoorMiners321]

solo después de filtrar, calentar la solución y agregar lentamente metabisulfito de sodio o bisulfito de sodio.

[@keiverdejesusblancorodrigu9265]

Ok amigo gracias lo voy hacer así a ver

[@yitnopawangepk1079]

Mantap dari Indonesia mengikuti Vidio anda

[@PoorMiners321]

Thanks brother

[@keiverdejesusblancorodrigu9265]

Excelente amigo cuantos teléfono uso

[@PoorMiners321]

Thank you❤

[@JuanofakindTV]

sir paano po mag create ng copper chloride?

[@PoorMiners321]

madali lang brod, maglagay kalang ng copper sa isang bakanting beaker or baldi, ilagay ang pure copper, buhusan ng muriatic yung mataas ang concentration nya maganda 29 to 35 % pero mahirap hanapin yung 35 to 36% yung 29% nalang nansool sa mga grocery store yun, tapos lanyan ng kaunting hydrogen peroxide 3 to 6%, hayaang matunaw ang copper siguro mga isang linggo hanggang dalawang linggo, galawin mo lang araw araw pag wala kang bubler, pero kung meron wag na galawin, tapos filter mo, ayan na pwedi mo na magamit yun

[@burriedhistory]

Nice recovery.

[@PoorMiners321]

Thank you

[@gold_turkey]

Güzel video teşekkürler.bakır dioksiti satınmı aldın, yoksa nitriği bakırla mı doyurdun

[@PoorMiners321]

I dissolve the copper wire, thin copper plate, into hydrochloric acid 36% by soaking them in 3 weeks..

[@payelsheakh9156]

good good gooooooooooooooooooooooooood job mmy friend

[@PoorMiners321]

Thanks you friend..

[@christophelovni4828]

Bonjours ce procédé m interesse beaucoup pourriez vous donner la liste et les quantités de produits à utiliser pour cette opération ? Merci beaucoup pour cette nouvelle vidéo . à bientôt 👍 Je m abonne ce soir ☝😊

[@PoorMiners321]

Merci beaucoup pour votre soutien mon monsieur, cette procédure est bon marché, nous n'avons pas besoin de dépenser beaucoup d'argent. mais cela prend plus de temps, la première chose que nous préparerons est de préparer une solution de chlorure de cuivre, de préparer le cuivre même à partir de fils de ferraille, seulement environ 1/4 kilogramme, puis de verser de l'acide chlorhydrique avec une concentration élevée d'environ 35%, de le laisser tremper jusqu'à ce que tout le cuivre se dissout, environ deux semaines pour que tout cela se dissolve, préparez-vous simplement à recouvrir le matériau dont vous souhaitez récupérer l'or, puis suivez simplement l'étape suivante comme dans la vidéo.

[@chrisdelaere]

Please how many phone panel did you use to make up that 2.75 gram of gold?

[@HainahImam]

Boss yung clorine puwedi pala irecover ng gold foil.kasu sinubukan ko nayan hindi ko narecover ang ginto sa gold foil napagud lang ako sa kakaipon ng mga gold plated pins nasayang lang parang humalo lang ata sa muriatic acid

[@PoorMiners321]

Baka naramihan mo sa pag lagay ng chlorine boss, wag mo itapon ang solutions mo e babad mo sa init ng araw, hayaang nakabus mga dalawang araw tapos e filter mo tapos precipitate mo gamit ang iron sulfate

[@HainahImam]

​@@PoorMiners321boss nasayang yung nirecover ko na gold foil....wala pang 1gram ang lumabas na ginto 14k.pa

[@PoorMiners321]

@user-fl9ih9dy9y wala man yun nawawala nasa solution mo lang yun

[@insultas87]

Can you write to coments what ingridients need? :) thank you

[@PoorMiners321]

i make it sir if i have vacant time soon

[@jepoypilyo8721]

@@PoorMiners321 can i have your fb account

[@ermondestrada1392]

Where can I buy those solutions that you used?

[@MidoFouda-kw6nb]

What is the active ingredient in the bleech I think I add colorox

[@PoorMiners321]

No need to buy brother make your own, that is copper chloride solution which is dissolved copper in muriatic acid

[@fatihguzel9839]

1.Nitric asit yerine ne kulandin ? 2.Ve nitric asit yerine ne kulana bilirim ? Seni aylardir takip ediyorum ve cok iyi isler yapiyorsun dostum 🤝👍

[@PoorMiners321]

Thank you my friend I used bleach instead of nitric to dissolution of gold.

[@fatihguzel9839]

@@PoorMiners321 sence Zonrox yerine Domestos & DanKlorix markalari kulana bilirmiyim . ? Cevap verirsen sevinirim dostum , bu isi yapmak istiyorum ve senin yardimina ihtiyacim var 🫵🏼 Izlemeye devam edicegim seni 🤝

[@Zeeshanqureshi9999-yj7nx]

Assalmalukum sir filter paper kis shop sy milta hai

[@PoorMiners321]

From lab supply store in our country sir..

[@Khusringoldminers]

Amazing, good lucky sir

[@PoorMiners321]

Thanks brother..❤

[@chrisdelaere]

Please how many phone panel did you used because I want to try this at home

[@PoorMiners321]

If remember that was 90 pieces, try to take on scale good amount start at 1 kilograms of cell phone circuit board.

[@chrisdelaere]

@@PoorMiners321 thanks for this, atleast it will help with my calculations. And again, how many tv or computer panels can make up to may be 100 to 300 gram of Gold.

[@OnsloVest]

Nice one

[@PoorMiners321]

thanks

[@keiverdejesusblancorodrigu9265]

Amigo la urea de que poncetaje % tiene que ser.y digame que pasa si no neutraliza bien la solución yo uso ácido clorhídrico y ácido nítrico así es como hago el agua Regia

[@PoorMiners321]

if you add too much nitric then you need to neutralize your aqua regia solution, by adding urea until no bubble your solution, for better result add ice cube to your aqua regia solutionto dilute excess nitric

[@Qinoy8238]

Sepertinya anda orang Indonesia , kalau boleh tanya saya sering mendapatkan endapan coklat dari basa atau asam tapi seperti pada vidio anda tapi saya belum bisa merubah menjadi kuning ,apakah perebusan endapan pada akhir vidio anda berlaku pada sistem asam dan basa ,terimakasih

[@PoorMiners321]

kalau warnanya coklat berarti emas, bisa dicairkan dan dimurnikan jika kemurniannya rendah

[@trkanktt4944]

Hello many thanks for the detailed informations. 1) what should be the bleach Hcl raito? 2) what would you advice instead of Smb ? I can not bear the smell of Smb? Many thanks

[@PoorMiners321]

About hcl and bleach Add the 35-percent hydrochloric acid to the sodium hypochlorite bleach into a flask or beaker, in a two-to-one ratio of acid to bleach. Ensure that the liquid mixture is at least six times the volume of the ore grains. Wear a face mask and avoid breathing the chlorine fumes the reaction produces

[@PoorMiners321]

In my style i dont follow that ratio, for me example, i add 100ml hcl then slowly add hypochlorite or chlorine then stir, if you see that all gold foils are diasolve then stop adding chlorine, then in the final add hcl again because the hcl has almost neutralize by chlorine you need the power of hcl to perfect precipitation.

[@PoorMiners321]

if you don't use smb the use coperas or copper sulfate to precipitate gold

[@trkanktt4944]

Hello many thanks. İ am trying to Recover gold from bga chips. İ burnt them and got a powder which contains metals but also plastic dirt. İ can not get any gold with hcl +bleach solution. 1) Was ıt because the solution cant go deep and reach the metals in the Bottom? 2) ı will do exactly the procedure which you have explained detailly in the next Batch. 3) is there any other easy method to Recover gold from Dirty and powdered materials ? Many thanks

[@PoorMiners321]

1, you need to stir the solution every single minute if you use chlorine, din if you think that you add too much chlorine, heat the solution again then add more hydrochloric acid to increase the acidity of you solution before you proceed to precipitation. 2, There is convenience chemicals very easy to use for that stuff, which is nitric acid and hydrochloric acid Aqua regia.

[@ramanthappa3474]

In our country nitric acid & HCL acid not available pls give solutation

[@PoorMiners321]

Hcl that is house hold chemicals that is available in super market common name muriatic acid bro hcl that is a chemical fomula

[@ramanthappa3474]

@@PoorMiners321 can v use hydrogen oxide?

[@PoorMiners321]

Hudrogen peroxide alone can't dissolve gold bro..

[@Road_Rash]

You can get more off the boards by removing the green layer from the boards with caustic soda...

[@PoorMiners321]

We will try that soon, thank you

[@Jeff-lk7df]

I'm sorry but what was it that you added after the copper caloried.

[@PoorMiners321]

That was only water to clean up remaining gold foils in my bucket to get out.

[@Jeff-lk7df]

@@PoorMiners321 okay so the very second step was only distilled water then if that's correct thank you very much for

[@gilbertogrimm5843]

Metabisulfito grado alimenticio or metabisulfito grado Reactivo?.

[@PoorMiners321]

Yes sir

[@elizandrosimioni7528]

Quantos kilos de placa de celulares foi utilizado. Meus parabéns pelo canal

[@PoorMiners321]

That was nearly 3kilogram

[@大哥劉-k2y]

Hi elder no Ap、CUCl² process. Will it be feasible?

[@PoorMiners321]

Muriatic acid 29% and hydrogen peroxide 3% to 6% are working good to extract gold, after one week collect gold foil by filter paper din dissolve it into muriatic acid and chlorine, then precipitate gold using smb or Iron sulfate.

[@大哥劉-k2y]

No HNO³ It's because Others Metal？Speed ​​selection？

[@PoorMiners321]

Okay brother write your origanal language so I translate it for you.

[@大哥劉-k2y]

我想理解的是，不添加硝酸的原因是因為避免混合板子裡的其他金屬嗎

[@PoorMiners321]

硝酸单独与水溶解 所有其他金属都会溶解 金属

[@Lâmlê-h3v]

How much kilo board?--2.75 g gold ,Thanks you.

[@PoorMiners321]

I forgot the exact weight of this material brother, but not less than 2kg.

[@worstboo]

Does this method work with any e-waste?

[@PoorMiners321]

Yes brother it works 100%

[@serbaserbitutorial-c4t]

is it the same cellphone that is here and the one there if there is gold in the process?

[@PoorMiners321]

🤝

[@ИванИванов-ш2т9р]

Дэй три !! )) так говорят вроде только брахмины в индии)) Вы родной от куда?

[@PoorMiners321]

Ako po ay taga bundok dito sa pilipinas..

[@ИванИванов-ш2т9р]

Звучит как по русски)) Филипины там тепло ))@@PoorMiners321

[@PoorMiners321]

Opo sir, maraming salamat..

[@ИванИванов-ш2т9р]

Товарищ!!!)) Сэров господ у нас еще в 1917 истрибили)) Щас правда новые нарождаются вот Украину и колбасит))@@PoorMiners321

[@antingerohunterphvlogs]

Shout out bro watching from aklan philippines

[@PoorMiners321]

Thanks bro..

[@PoorMiners321]

@antingerohunterphvlog thanks bro..

[@RahmanSitompul-x9t]

Pemutih itu mengandung apa master.. Saya dari Indonesia

[@PoorMiners321]

sodium hypochlorite (NaOCl)

[@RahmanSitompul-x9t]

Terima kasih master. Salam emas master...

[@angelooldman7201]

THANK YOU FOR ANOTHER GREAT VIDEO

[@PoorMiners321]

❤

[@me.bangladeshi]

Is this original gold?

[@PoorMiners321]

Yes

[@me.bangladeshi]

@@PoorMiners321 how can I learn it. I have no idea about it

[@phillipward4934]

Amazing videos. Thank you!😊👍🪙

[@PoorMiners321]

Welcome sir..

[@uyu7238]

Boss paano mo tinatapon ang mga chemical solutions na ginamit mo??

[@PoorMiners321]

May video ako boss kung paano ko ginawan ng paraan ang mga waste ko..

[@uyu7238]

@@PoorMiners321 boss anong tittle ng video?? Gusto kong mapanood

[@PoorMiners321]

Scroll mo pailalim yung mga video ko medjo matagal tagal na ata yun

[@darganx]

Good yield!

[@PoorMiners321]

Thank you brother

[@hoseindorani-dl1ty]

Is this real gold? How pure is it. Thank

[@PoorMiners321]

Yeah, thats real gold? Maybe not less than 22k, you don't believe that your old mobile phone have gold? Do a research all over the the internet..

[@hoseindorani-dl1ty]

Very good thank you@@PoorMiners321

[@amateurboxing4806]

wooow great video, Thanks a lot..

[@PoorMiners321]

Thanks..

[@ЮрийФинадеев-ь3з]

Красиво.

[@arnoldabergos134]

Bos may plated cola aq saan nka bili patangal sa gold

[@PoorMiners321]

pwedi yan e babad mo sa muriatic, at lagyan mo ng kunting hydrogen peroxide, at hintaying matanggal, mabibili yan sa parmasya yung hydrogen peroxide at sa grocery store yung muriatic

[@stuffshop4883]

You helped me. Thank you! 👍👍🙏

[@PoorMiners321]

Thank you❤

[@bahtiyor3215]

Сначала заливаешь соляной кислотой?

[@PoorMiners321]

Yes hydrochloric acid is always first added.

[@bahtiyor3215]

Спасибо.

[@MagdaleneHenricus]

Great 👍

[@PoorMiners321]

Thanks❤

[@shockingshorts8043]

Isn't copper chloride just as hard as nitric acid to get?

[@PoorMiners321]

It's very easy bro, it's just muriatic acid and pure copper

[@kenreed1467]

muratic acid and hydrogen peroxide

[@PoorMiners321]

that's possible too

[@matthewgilmore5307]

what are you using ?

[@PoorMiners321]

Hydrogen peroxide 6%

[@williebrinson4699]

16:25 what's the value?

[@PoorMiners321]

Its almost 166.9 US $

[@cynthiabarruga8982]

Magkano ang halaga ng aabutin nyan kapag ibininta na...

[@PoorMiners321]

yung ibang gold smith bibilhin nila 3.3 per grams.

[@TimSchneider-hi8dv]

What you get $$ for a gram a dat

[@PoorMiners321]

That was 8,220 philippine pesos equivatent to 149 dollar.

[@mraa7653]

I'll try it if it's working I'll give your feedback 😊

[@PoorMiners321]

yes its working 100%

[@knowldedge5012]

did you first removed all solder? Or did you get rid of it after

[@PoorMiners321]

the solder tin on the mobile phone board is only thin and it was removed immediately, removing its ic chips, by heating the charcoal wood if there is even a little left and it does not disturb the process

[@knowldedge5012]

@@PoorMiners321 Thank you, I want to apply the same process to plastic contacts but some plastics melt in solution. If I incinerate all the contacts and then process do I loose any gold?

[@PoorMiners321]

Yeah plastic are melted during heating the solution, does not affect the gold and you never loose that. but if you incinerate, the gold are alloyed with other metal then acid peroxide or chlorine is not work well because the metal are forming thicker, you need nitric acid to complete.

[@yavuzozturk9655]

Kullandigin urunleri yazarmisin guzel vidéo 👍

[@PoorMiners321]

Yes, 1. Hydrochloric acid common name muriatic acid 2. Hydrogen peroxide 20 volume 3. Sodium meta bisulfite

[@yavuzozturk9655]

@@PoorMiners321 ben bir turk’um ve Paris ´de yasiyorum vidéolarin hayatimi duzeltti❤️👍Merci pour le réponds ✋

[@PoorMiners321]

Thank you and your always welcome

[@junlee993]

But what exactly is it when SMB comes out during the explanation?

[@PoorMiners321]

smb는 나트륨 메타비 아황산염, kung sakaling hindi gagana ang smb, pwedi mo palitan ng iron ll 또는 mura의 madali mung hanapin인 황산철을 의미합니다.

[@junlee993]

@@PoorMiners321 thanks

[@ivsongold322]

Very Nice 👍🏾👍🏾🇧🇷

[@PoorMiners321]

Thanks bro

[@jeanbastien8690]

Pourquoi ne pas faire évaporer l’eau ? Au lieu de le filtrer. Merci

[@PoorMiners321]

Il peut s'évaporer, mais comme nous n'avons qu'une petite quantité de matière, je ne l'évapore pas

[@jdidinajwa1651]

Trés bien

[@PoorMiners321]

❤

[@charliecastillo6504]

I dol anung hcl ang ginagamit mo po pa send pic naman i dol

[@PoorMiners321]

ok idol visitaha akung page.

[@uyu7238]

Filipino ka pala boss, pero nakapag comment ka tunog kastila. Paano mo ginawa un boss?

[@PoorMiners321]

Oh madali lang yan boss

[@userMarat77-]

Очень долгий процесс снова получается, и зачем растворять медь в соляной кислоте? Можно же просто взять лимонную кислоту из магазина, соль пищевую, перекись водорода 3% из аптеки, и снять всю позолоту с плат за два дня...

[@PoorMiners321]

yes that will work too, but in this video, we will use this method first, but next time we will do it the way you say

[@amigoblog4929]

Sir bka gusto mo tunawin marami ako topboard at mga nokia mga 50kg

[@PoorMiners321]

Dami nyan bro maganda yun

[@abdulmalikbangcaring7002]

Sent me to step or name of use how to get to gold ol scrap cp plss

[@PoorMiners321]

okay follow this steps

[@THVLog-zp5em]

Bro pano mag recover ng gold ng tae ng kanding

[@PoorMiners321]

Ah madali lang yan bro kainin mu na agad pag labas sa puwit ng kanding mo

[@ignacio3048]

Thanks for sharing 😊

[@salihakdag6371]

Harika mantıklı 👍❤

[@PoorMiners321]

thanks

[@ramanthappa3474]

Silver refining❤

[@mpartv.5047]

Boss pede mag OJT senyo ?my ewase din me

[@PoorMiners321]

nasa malayo ho ako bro, saka na sigurog maka uwi na.. si HAWK EYE PARADISE BAKA MALAPOT LANG SAYO YUN

[@TheBlackstag1]

You are a legend

[@PoorMiners321]

Thanks ❤

[@soraida8076]

Bossing pabili ako ng nitric acid mo kung mayron ka...

[@PoorMiners321]

soo sorry bossing wala po tayong binibintang acid bossing.

[@asparouhcvetkov7526]

This is much much much much MORE expensive!!!! Why would someone use this method in my country 10 litters of nitric asid is 5 dolars and 500 grams of copper chloride is 35 dolars.

[@PoorMiners321]

👍

[@kamikazetom9785]

In germany we cant buy Nitirc Acid !!! So its a good Video

[@The0171588]

All these steps for 2 gram. I guess that the effort u put in was the same price as the 2 gram gold. Should only be nice if it is hobby or u need to deposit more to earn some.

[@PoorMiners321]

Yeah but need to upload, thats why I process even in small quantities

[@piyapongeiamlaor4234]

สวัสดีครับ

[@PoorMiners321]

Hello too bro

[@dalencar1016]

You my Brasil broder quero ser fera one day

[@PoorMiners321]

see portuguese translation