No Paper Reload Paper Then Press Start (FIXED) Feeder Cam Lever Replacement Brother Printer HL2280DW

In this video we fix the no paper reload paper then press start error with a feeder cam lever replacement on a Brother Printer model HL2280DW. Its not a very hard repair and we show two ways that could solve this error for you. As always do all of this at your own risk, this is for entertainment and educational purposes only.
It will work on multiple Brother printer models that have the same design, from my research it should include these models and perhaps others as well:
Brother HL2130 HL2220 HL2240 HL2270 HL2250 HL2280 MFC7360 MFC7362 MFC7365 MFC7460 MFC7470 MFC7860 DCP7055 DCP7057
Actual part# LY2579001
Part I bought - amzn.to/3xbLNVh
Cheaper one - amzn.to/3ho5VNe
Video Index:
0:00 Intro
1:20 No Paper Error
1:44 Why this error occurs
2:40 First Fix (easier, realign the cam lever tab thing)
3:38 Permanent Fix - Full feeder Cam Lever Replacement
3:45 How To Remove Side Cover Brother Printer
4:43 Remove Paper Pickup Motor
5:30 Remove Cam Lever from Printer
5:38 Compare broken lever to new lever
5:54 More Explanation of how it works
6:47 Spring Reinstall (if needed)
7:15 Orient and Install Feeder Cam Lever
8:08 Close up of inside tray view of correct placement of installation
8:32 Reinstall Paper Pickup Motor
8:57 Test Before Reassembly
9:41 Side Panel Reinstallation
The links in this description contain some affiliate links, at no cost to you a small percentage of the sale will be given to me if you buy through these links. These funds help to buy more printers and do more reviews and compatibility tests. Thank you =)
MUSIC------------------------------
chill. by sakura Hz / sakurahertz​​
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/chill-sakuraHz​​
Music promoted by Audio Library • Chill - sakura Hz (No ... ​
Tags
no paper error,no paper error brother printer,printer no paper error,no paper reload paper then press start,brother no paper error fix,brother feeder cam lever,replace feeder cam lever,how to fix no paper,how to fix no paper error on brother printer,how to fix no paper pickup,brother hl-2280dw no paper error,brother feeder cam lever replacement,how to remove side cover brother printer,no paper fed brother,brother printer no paper error

[@user-tx6fc5tx8c]

Was ready to pull the trigger and buy a new printer, then found your video. THANK YOU! Crystal clear directions.

[@webstertiums]

Thank you! Besides helping me to fix my printer (ok, I haven't done it yet, but I am hopeful) this should be required viewing for anyone recording a how-to video. Clear, concise descriptions, a voice that can be understood, no music drowning out the narrative, with a clear view of the parts and pieces throughout. A master class in how to do a "how to do"!

[@mikecrad29]

Excellent video. Very clear, detailed step-by-step instructions. No annoying music, no camera shaking around, and you were very understandable. The way a how-to video should be done. Also, thank you so much for posting this. It kept me from having to buy a new printer.

[@thecollegepicker]

Appreciate you 👍

[@jonathansafir3084]

You've saved another one from the junk yard! MFC-7460DN - One thing to add: before being able to get the "head" seated behind the cam, FIRST I had to get the piece fully seated on the bottom part, where the "foot" had to be flexed a bit in order to articulate with the slot in the machine. Once I got that inserted, it was easy to get the head easily flexed behind them cam (without the "foot" inserted, the "head" kept popping out from the cam). Thank you so much! $8 for the part (and half an hour) saved my printer (and me from having to replace it entirely). CHEERS !!!

[@danielzautis5295]

Crystal clear directions. So much easier than a manual. Thanks. Saved us from getting a new printer.

[@thecollegepicker]

You are welcome. Saved it from the trash is mission complete in my book 🙌

[@bobjohnston4325]

Thank you!!! Clear and concise instructions. I was able to reposition the broken feeder cam, fill my paper tray, carefully put the tray back in and continue printing my documents. Ordered a new cam and will replace the broken one. You saved my day!

[@thecollegepicker]

Happy to help Bob. Glad you got it going temporarily and going for the future permanent 👍

[@ElaineKim-yj2rs]

Thank you so much for saving me from having to buy a replacement printer!!! I tried everything, including troubleshooting with Brother and looking at other videos, before finding this one. This is the ONLY one that solved the problem. The directions are clear and easy to follow. The trickiest part was getting the piece to sit where it should (such that both the square and the handle are in place). It had to be pushed further down than I initially thought.

[@jonathanplotkin]

Really clear instructions! I had some trouble getting the cam lever seated all the way in but it helped a lot to see how the little bit on the end latched in. Thanks so much!!!

[@thecollegepicker]

You are welcome ☺️

[@eearthman499]

Thanks for the help. I followed the instructions and the printer works again. The biggest problem was getting side off. 2270DW. I never was able to find clear visuals of the clips etc. I did it all from beginning to end. Truly appreciated.

[@thecollegepicker]

Happy to help 🤝

[@davidbwa]

Thank you. AGAIN. This video fixed my problem a couple of years ago. I didn't replace the part - just shoved it back into place. Today, after a couple of years of it working fine, the same problem happened again. I couldn't remember the exact details so looked up this video again - shoved it over again and now I'm printing okay again. This time I've going to purchase the part and replace it.

[@thecollegepicker]

You are welcome again. Happy to help!

[@Graham_Wideman]

Well done on a very clear explanation of "the white lever", and how it slides out of position if the "tooth" gets broken. Probably most people will buy a replacement part in this case. However, on my HL2270DW I found I was able to form a stop on the shaft that holds the lever. I slipped an M4 nut over the end of the shaft, which leaves exposed a small amount of the shaft. I then used a soldering iron to melt the shaft inside the nut to hold it in place.

[@thecollegepicker]

Great solution! Glad I was able to help.

[@Tedlorilane]

Just finished replacing the broken part, and my 2280DW is once again loading paper. Before I came across your video, I was prepared to accept needing a new printer. Your instructions were flawless. Thank you so very much.

[@thecollegepicker]

You are welcome. Kept one out of the trash 👍

[@encinobalboa]

I got a $10 2270DW today with this problem. Followed the video with success. My cam lever was dislodged and not broken. Turns out my drum is near 100% but toner is around 20%. There was a NIB OEM drum and 2 Quill re-man toners for another $20 so I am all set. Saved a small bundle and kept a good printer out of the landfill. Thanks!

[@daveruthi]

Fantastic! I couldn't have done it without your help! Thank you so much for sharing this with the "Brother" world in need of repairs! Thank you printer doctor! Amen!

[@thecollegepicker]

You are very welcome. Happy to help 🤝

[@rayofvictory]

Wow, you are an absolute godsend! Perfect video. I was this close to ditching this but paused about the landfill. A quick search and your video popped on the search. Keep rocking with instructional videos like these. Thanks a bunch!

[@thecollegepicker]

Saved it from the 🗑️. 👍 Happy to help.

[@laurat2749]

Thank you! This video saved us from getting rid of our printer and buying a new one. The $6 part we bought from Amazon was a whole lot cheaper. Your video was very clear and concise. If we ( a couple of seniors) could do this, then anyone can do it. Thank you for your helpful video.

[@thecollegepicker]

Glad I could help! Good work!

[@Michael-rx1ud]

An excellent and very informative video. I followed the instructions (including the Amazon purchase), received the part within 18 hours of ordering, and was able to complete the repair. I am honestly amazed that it went so well and was so successful (with my fat fumble fingers). Thank you, thank you, thank you!

[@natashawright9495]

It worked for a ten year old Brother HL-2275DW, THANK YOU! This saved me money, time and effort in not having to buy a new printer yet and this is also better for the environment. Much appreciated!

[@thecollegepicker]

Love hearing that. You are very welcome

[@nednedford]

You're a freaking genius! I was about to give up on my over 10 year old MFC-7360n and was preparing to purchase a replacement. Then I watched the first part of your video, saw the white tab was dislodged on my printer. I used a hemostat to move it back into position, the error went away and I was able to print. THANK YOU! THANK YOU! THANK YOU!!!

[@domb362]

Excellent video. I've seen others that have no dialog or speed up some of the steps to the point of being useless. This was detailed and to the point.

[@donaldfennell971]

Great instructions. I worked for Xerox for 25 yrs. as a technical rep. I serviced the 914, 813, 4000 series copiers. It was easy for me to follow your instructions. I did notice that the cam may have had some lube on it. I think that a dab of some with lithium grease or vaseline couldn't hurt. Thanks, I can't kill this MFC-7860DW.

[@plyavali]

Thank you for taking the time to make this video. And for providing the link to replacement piece🙏 Mine chipped and that's why it's not staying in place. I was able to print a test paper before it slid back out. But thanks to you, I know the issue, and I should be set once the replacement arrives

[@benjaminkukkee286]

I fixed my mom's MFC-7360N with this video. It took 2 attempts, but it worked. Thanks!

[@PhilipAnderson]

Thank you so much, exactly what I needed to know to fix my Brother HL2270DW printer. The tiny plastic nub was broken and barely hanging on. Bought a replacement part from Amazon for about $7 and fixed it!!! Only detail for the 2270, there is a retainer tab on the bottom of the side panel in exactly the middle that needs to be released by wedging that point downward on the side cover.

[@STAR-bp8zk]

You are truly the best. my hubby fixed this and I am one happy lady!! You are the gift that keeps on giving!! hugs!

[@thecollegepicker]

Wow good on him! This isn't a super easy fix. So happy to hear that 💪

[@soulsurfer4441]

Awesome video. You got me up and running again. I moved recently and had the boxed printer in the uhaul. Guess it got bounced around to much. When taking it apart I found a tiny piece of broken white plastic on the feeder wheel. Put it all back together and now she works. You da man!

[@thecollegepicker]

Good work! Happy to help. Enjoy your new place 🤝

[@luisreynoso1734]

Excellent instructions! This video should be used as an example of what a how-to video should be like. No music, parts visible, and very good explanations with links to where to get the parts.

[@tuneheister1956]

I tried to install my new cam lever 5 time. Viewd 5 or 6 KZbin videos. Yours is the only one that really showed me how to do it. Thanks.

[@thecollegepicker]

You are welcome 🤝

[@mishasta]

I've been so frustrated with my HL2240D for the past few weeks. So hard to find a replacement printer, or it now cost 3 times what I got it for a few years ago. I thought I needed to replace the paper tray, and ebay has them for at least 30 bucks or more with additional shipping cost! Your video was so thorough! I fixed it! Thanks!

[@thecollegepicker]

You are welcome. Happy to save you time money and stress. 💪

[@arudson1]

Thanks very much for your video. I used your video a few times to remember how to fix the little white tab on my HL-2270DW and today to do the full replacement. I ordered my replacement tab from AliExpress - $3.04 Cdn for two with free shipping. Took about 3 weeks for them to arrive but now all is perfect. Thanks

[@GG-pl9jm]

2021.10.24 So clear and direct. No waste of time. Well presented. Thanks, I'm ordering the part as soon as I find it.

[@thecollegepicker]

You are very welcome ☺️

[@jochalli8691]

It worked! I have had this Brother printer for 11 years and love it. Thanks for the clear instructions. Glad the printer did not end up in a junk yard. 😉

[@thecollegepicker]

You're welcome! Merry Christmas

[@caeengineersllc.5444]

Excellent video and instructions. It was that cam that came loose; and when I repositioned it the paper feed mechanism works well and my printer is back in service! Thanks a bunch. Saved me the aggravation of shopping for a new printer and hooking up to WiFi. - Charles 3/3/2022

[@thecollegepicker]

Thanks for watching Charles, happy to help 😃

[@mpaul2012]

Thank you for the detailed instructions 👍 So glad I didn't have to get a new printer.

[@user-dx9jc1kl9j]

Excellent video and very easy to follow!! My husband was able to do the repair, from start to finish, in under 30 minutes. We also opted for the more expensive one-piece part that was delivered in one day. Thanks again!!

[@thecollegepicker]

You are welcome. Good work hubby! 👏

[@jeffdunakey3835]

Thanks for taking the time to do this video. I pulled the side cover off and found the clip was out of place so I reseated it and it is working great.

[@williamcrosby4354]

This was a great video, that spawned a fix at my end. One suggestion; between 7:30 and 8:00 of the video, perhaps mention that the tag ('tooth') needs to be inserted through the crescent-shaped guide in order to be fully seated properly. As soon as I saw that, everything was 'singing & dancing'. Thanks again!

[@Chrislee-we3hk]

As a KZbinr myself I needed this printer to work for my scripts. You made a video and it was amazing thank you. Bought the part on Amazon per your link for commission

[@thecollegepicker]

Glad it helped!

[@lubradoon]

آپ نے بہت ہی عمدہ طریقے سے پرنٹر کو ٹھیک کرنے کا طریقہ بتایا ہے میرا پرنٹر ایچ ایل ٹو ون ٹو تھری زیرو ہے میں نے بڑی آسانی کے ساتھ اپنا مسئلہ حل کر لیا یا آپ کا بہت بہت شکریہ

[@jurgenwittmann2905]

Many thanks for this repair tutorial. Now I was able to repair the printer for 9 euros. You saved me buying a new printer again. This is now the second printer with the same problem. Luckily I still have the first one (slightly different type but same parts), which I will now also repair.

[@billschardt6432]

Great video. I fixed my printer for less than £5, and I was thinking of buying a new one. Mind you it wasn't as easy as the video made it look but I got there in the end!

[@chuckysmom4142]

Followed the instructions and now my print works!! 🙏🏾 🎉

[@CurtisJemand]

That cam did it for me, overnighted a replacement and was back on track, thanks so much!

[@thecollegepicker]

Good deal!

[@GoldmanAssociatesI]

This is a better video with clearer instructions than the other videos I have seen. Well done sir! Thank you.

[@thecollegepicker]

Thank you 🙏

[@Nevyn42]

Thanks for this repair guide! This repair was very easy with your clear video instructions. I was able to fix my MFC 7460DN. I ordered two replacement parts from Amazon in case it fails again in the future.

[@melindarimmermusic]

Thank you so much for going through the effort of making this video, and making it so detailed. I was about to give up on my old printer that would have been more expensive to fix than it is worth. But I really didn't like the idea of having to get rid of a printer that up to a certain point served me without ever having any issues. That point was a house move as well, so I was pretty sure, something mechanical must have been going on. I just needed to nudge that little white plastic thing back into place and now it's working again! And if it ever breaks off completely, I know where to turn to to fix it again. Thank you for allowing me to not only save our wallet but also reduce waste that would have been completely unnecessary!

[@cptcarot]

Thank you very much, you have saved a printer from landfill. I watched your video after a friend had a printer with the same fault. Checked the printer & the plastic tab was not in the right place, once removed I noticed it was broken. Ordered a part straight away. Thanks again.

[@thecollegepicker]

You are welcome. Printer thanks you as well as mother Gaia 🤝

[@peggysun3595]

Thank you so much! Exactly what I needed. Clear and concise instructions.

[@thecollegepicker]

Happy to help Peggy ☺️

[@hifza9413]

Clear and easy instruction and especially for the exact replacement part link. Thank you for helping share how to repair, rather than discard large devices.

[@damariswebb7499]

Thank you!!! Easy to follow instructions. I too, was able to reposition the broken feeder cam, fill my paper tray, put the tray back in, and can print documents! I have ordered the new cam and will replace the broken one. Huzzah!!

[@thecollegepicker]

You are welcome. Good work!

[@stevefromjustimagine161]

I normally don't leave comments, but the instructions were clear and I feel, very thought out to make this an easy fix, thanks.

[@thecollegepicker]

Happy to help and happy to hear the feedback 🙏

[@eshaansharma280]

Damn I didn't even knew a printer could be this complicated. Thanks for this tutorial otherwise this could be a big loss on fixing it personally. Thanks Eric !!

[@thecollegepicker]

Small part to keep it out of the trash 🙌

[@lawrencejosephmayer]

So easy when you see what's needed Downloading the manuals were useless. Than you so much.

[@leonardedgarsr2014]

The hack on the paper tray worked and saved my bacon..Thanks!!!! I thought my printer had gone belly-up!!

[@thecollegepicker]

You are welcome. Happy to help

[@yuriz7364]

Thanks, your tutorial works perfectly! The plastic part had the retainer lip broken off but I didn't feel like buying a new one. So I found a plastic collar in my parts bin and I pressure fit it over the black plastic peg that holds the faulty part in place. Maybe you can find a nut that would fit on the black peg so the fix is permanent. Great work!

[@pspatil2302]

Eric, You have explained it well, so methodical Thank you

[@thecollegepicker]

You are welcome. I strive to do it as such 🙏🙏

[@crnaik321]

You are a genius, my brother printer had the same issue, your video helped me in fixing the issue, your explaination was so easy to understand, I followed your instruction & my printer got fixed, thank you so much.

[@thecollegepicker]

You are welcome. But I am not a genius 🙂 😂 🙏🙏

[@Longhiver]

OMG! IT FRACKING WORKED! I've been using my printer with the manual feeder for the last 2 years. hahahaha! Just had to put the white plastic piece in place. Thank you soooo much.

[@lubradoon]

I have HL-2130 and after your instruction video, I was able to fix it ver easily and to the point. I even used the old part ... :) Thank you so much

[@cathycotton9635]

Thank you!!! This takes the fear out of trying to get ths fixed. It's clear, it's concise, and hopefully will work out for me.

[@thegreatfixer]

finally you win there must be 20 or more and after 8 or more yours is the clearest most concise thank you

[@thecollegepicker]

Appreciate the win 🙏

[@rikikellogg1596]

THANK YOU!!!! My Brother was giving me fits!!! Just moved and the printer worked before the move! Looks like that little plastic piece that you were describing at about 6:21 was the culprit finally got it seated correctly and Boom Printing Worked again! You Rock/1

[@thecollegepicker]

You are welcome. Good work and diagnostic 🤝

[@sumit84ky]

Thank you so much! Your video helped me found the broken feeder issue. For now it is working after re-position, not sure till when. Thank you again for the part number, ordered a new one. You are amazing...

[@thecollegepicker]

You are welcome. Happy to help

[@ChakaStarkes]

Thank you so much! Perfectly detailed and informative. You saved me from buying a new printer

[@andymiller54]

I would have given this printer to goodwill if I hadn't found this. Exactly my problem. Thanks for the clear instructions!

[@thecollegepicker]

You are welcome 🤠

[@Mikidy303]

Great tutorial. I'm really glad to be able to fix this. I really don't want to buy a new printer now that they've put DRM into a lot of the cartridges.

[@SatisfiedCustomer-oj7nr]

Great job! Clear, concise and good visuals.

[@eugeneshia4937]

Totally worked! Loved the concise detailed explanation. Thanks!

[@israelkuller3373]

Thanks!! Best Tutorial video I ever saw, Simple, detailed, 4 tumbs up!!!

[@coppcar]

Well done TCP. For all the reasons others have stated. Thank you.

[@edikap]

Thank you for the clear explanations. You saved the day for us!

[@jasonbrussmn]

Thank you for this video! just had to replace the cam lever and back to printing.

[@stephennyarko5203]

I don’t usually comment on videos, but I had to for this one. Excellent Tutorial!!!!!!!!

[@justanotherjessica]

Thanks for this! The little tab on mine just broke today, thankfully I can still print things by feeding manually until my replacement part comes in. I feel confident that I can follow these instructions and get the part replaced.

[@justanotherjessica]

Update: I did it! It was a bit more difficult than I thought to get the piece seated on the black peg (sorry can't remember what you called it) but I managed to get it on. I've printed several things and everything is working as expected! :D

[@thecollegepicker]

Excellent work! This was no easy task 👏👏👏

[@dragoncoffee2949]

Thank you! I fixed my printer thanks to your video! Good explanation.

[@antoniogiamberardino602]

I had to pull the tab back in! Thanks for the help!! Today was a stressful enough day.

[@thecollegepicker]

Glad it helped!

[@ramanan86]

Thank you so much for this! Saved my printer and my sanity! truly appreciate the time and effort put into this incredible how to video!!

[@amitpaulsgill]

I am glad I stumbled on this video. You saved me money with this quick fix. I really appreciate your help. 😊

[@dismentei]

Good job, man, your video worked perfectly for a DCP-7065dn and so I saved 200 euros of a new printer, thanx a lot!

[@thecollegepicker]

You are welcome 🤠 happy to help you save them euros

[@kevinfu5362]

Thank you! Helped fix my printer!

[@roxyrvas]

Holy crap dude you saved my printer. Thank you

[@acm-3001]

Excellent instructions. Works like a champ. Many Thanks!

[@Necator]

Thanks! You saved my printer! The cam lever tab was hidden after transport and storage.

[@haatajadesigns535]

Thanks so much! $12 part saved us. Your video was very clear and helpful!

[@thecollegepicker]

Good work! Happy to help 😃

[@user-yc9bl7vw2j]

Perfect, worked like a charm. Thank you!

[@Ali-qt8en]

amazing video, helped save my printer 5 stars! followed your directions to the T

[@nancym1430]

Thank you so much! I had this exact problem and Fix #1 worked -- we'll see if the problem occurs again, but then I'll go to Fix #2. I love this printer, so thank you for sharing how to keep it running!

[@thecollegepicker]

You are welcome. Another one saved from a landfill ✅

[@NickRoeder]

Absolutely excellent video. This worked perfect on my 2270DW.

[@thecollegepicker]

Happy to help Nick =) glad it helped you fix your 2270.

[@billcostagliola4548]

Great tutorial! Fixed the problem. My part just jumped off and had to be put back into place

[@sameerswar4056]

Eric, Thanks. Fixed my issue.

[@thecollegepicker]

You are very welcome.

[@korbindallas-os1vi]

Great instructions! Easy to follow. I was able to fix my printer just by following steps from this video. Thank you!

[@javariasajjad6499]

Thank you so much for this video; I was able to fix my printer and get it working. Very clear and understanding instructions. Truly appreciated.

[@hinatazama3103]

Thank you so much for a step by step instruction!! So helpful!

[@thecollegepicker]

You are welcome 🤗

[@tazb88]

Thank you! Helped me fix my printer within 5 minutes!

[@thecollegepicker]

Your are welcome 🤠

[@fjbrady]

Thank you thank you thank you. I've fixed this before bur didn't know about removing the motor. MUCH easier.

[@user-gj7pv4dn5l]

Thank you! Easy fix thanks to these instructions.

[@jschwertner1022]

Thank you for the very informative video! I successfully tried the first fix before but this time I pushed the tab back by accident. Opening up the side and pushing it back into place solved my issue. Good to know how to replace the cam lever feeder in the future. Thanks again!

[@thecollegepicker]

Happy to help 🤝

[@bonniecrowe1531]

Thank you so much. Fixing it myself... with your help.

[@slimjim8865]

Thanks! This made it super easy!

[@ruggemiu8654]

Perfect video! I fixed my Brother printer paper pickup problem as well. Thanks a lot.

[@thecollegepicker]

You are very welcome 🙂