Rotary Engine Teardown. The WORST I've Ever Seen | Mazda FC RX7 13B 6 Port

[@Michael_Michaels]

7:40 that's a proper mechanic right there!!!! 😁

[@TheCanadianBubba]

I might get one apart, but don't think I could get it back together LOL ! Thanks Broomy, best days to you and yours 👍

[@vesperfc3s]

My engine was sitting for 20 years as well, all the parts are still within spec though surprisingly, was decently clean inside too aside from the oil being very dirty.

[@BEYTEK]

im so glad i got rid of the rotary. 12 years a slave.

[@davidhusband5022]

im really glad you were honest about the bearings

[@teavstravel]

Why does there seem to be a few manufacturers who do the aftermarket plates (and have been for years) but only super recently has anyone started making aftermarket housings? Guessing the manufacturing process for the housings is far more difficult/advanced and hard to be profitable?

[@sandervanderkammen9230]

Obsolete technology... not a commercially viable product anymore.

[@richiebarrow9169]

You said it... decades ago looked into rechroming. When the business enquired into the replacement price of housings , the cost was low compared to the low volume of chroming costs

[@teavstravel]

@@richiebarrow9169 cheers - I expected that might be the case.

[@sacrificialrubber779]

Using that penetrant oil like you are sponsored!!😂😂🤣

[@devonswindell9735]

They say 2-1/8 because 54mm is kinda hard to find over here unless you order it online. I was seeing 54mm sockets online for 40-60$ while I can go to a tool store and get a 2-1/8 for 18$

[@Sysiphos]

Not related to this video, but did you nail down putting a Barra to the 929? Skid Factory guys have made some nice conversions with toyota UZ1 V8, A340 automatic and ebay turbos, but I have no idea how expensive they are nowdays. Could be even harder to fit than a barra but would definitely sound better.

[@smithy2]

Good stuff Broomy

[@megakransky7]

Hi, are the housings up for sale ?

[@liboy9844]

I’d take my chances and try to fix it.

[@Deanozdirect]

Was the six port a good engine and could you bridge port it or peripheral port it or even make good power turbochargeing it or is the four port a better option

[@BroomysGarage]

For turbo the 4 port is better. The 6 port as a factory engine is ok in n/a form. Same configuration found in the manual RX8’s as well. A PP doesn’t matter what the irons porting is as you fill them in with devcon or similar and block them off.

[@cemturyan2653]

Awesome video. What a shame the engine was left to rot. Most of the parts are salvageable though. I would really like to see a follow up video on this

[@sandervanderkammen9230]

Garbage, throw it in the scrap metal pile

[@Sedona_FD3S]

Hey Broomy

[@GLxGL]

Aaron Hogan probably has worse ones than this kicking around at the secret warehouse!

[@610SSS]

Just pulled apart my $700 Facebook 13b 6 port (wish it was free), been sitting for donkey's with water in it, worse than yours. Its got pitting in the lower sections of irons and minor flaking in lower section of housings and pitting on one face of one rotor. I'm just gunna clean it, reseal it and send it.

[@mattt83]

Does the oil pickup have a check valve in it?

[@dandewar8403]

Do Mazda still make housings and rotors?

[@BroomysGarage]

Yeah. 10A and 12A stuff is discontinued, but you can still get the rest of it for the most part.

[@RS-sv3bl]

Nothing a major service wouldn't have fixed ..