CaddySwampAss Airboat Part 3 - NNKH

0:00 Intro / Carport
03:13 Working On Boat
08:39 Start Up / More Prep
10:59 Install Prop / Rudders
13:08 Water Test Day
22:36 Stuck In Muck
29:00 Address More Items
32:06 Oil / Oil Pan
39:08 Test Ride 2
44:54 Spare Tire / Shallow Rocky River Ride
46:57 Wrap Up
49:02 Trip
Finally got CaddySwampAss out on the water with the help of Alex from @downstateradv(Check him out here: / @downstateradv
Also a massive thank you to Darrin @sensenichpropeller6690 for setting us up with an awesome MADE IN USA composite Prop. Drop them a follow on Instagram here: / sensenichprop or on KZbin here: / @sensenichpropeller6690
`
Thanks so much for watching and I hugely appreciate any channel support. Thank you!
Channel Sponsors:
@BlasterProducts (www.Blasterproducts.com)
@optimabatteries (www.OptimaBatteries.com)
~Merch and More NNKH @ linktr.ee/NoNonsenseKnowHow
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Awesome Channels I Watch and You Should Check Out:
~Project Farm: / @projectfarm
~Vice Grip Garage: / vicegripgarage
~Trail Mater: / @trailmater
~Junkyard Digs: / @junkyarddigs
~Car Wizard: / omegaautoservice
~MotorCity Mechanic: / motorcitymechanic
~Chris Fix: / @chrisfix
~Andrew Camarata: / @andrewcamarata
~Humble Mechanic: / humblemechanic
~Fab Rats: / @fabrats
~Essential Craftsman: / @essentialcraftsman
~Mustie 1: / mustie1
~EricTheCarGuy: / ericthecarguy
~Puddins Fab Shop: • I found another ABANDO...
~Mortske Repair: / mortskerepair
~South Main Auto Repair LLC: / @southmainauto

[@Kingsoupturbo]

Really appreciate the respect for the Beetle, thats how you earn a lifetime viewer right there.

[@ggmmiillff]

What an amazing series build glad i found this channel

[@larrycarr6545]

Newbie poster here. My compliments on the show but more so I am absolutely awed by your ability and resourcefulness. You, my friend, are one cool dude. And Jenn has to be a saint to put up with all your projects. WELL DONE YOUNG MAN!

[@Dmhlcmb]

The wife is a legend. Willing to stand knee deep in mud, epic.

[@raprap1071]

You need a grass rake on the front to lay the lily's down so they dont fold over the front of the boat and stop you. I've grown up.with air boats all my life and I've owned several and a 1976 500 caddy is bullet proof. I've ran those for years. Hard to find these days

[@jb-uw2vt]

Wouldn't a belt drive to the prop with the motor sitting lower in the boat be a better design? Also, are there airboat props that can handle more than 3000 ripums? I have no idea. Zero airboat experience.

[@Mad.Man.Marine]

@@jb-uw2vt the 3000 rpm is for exactly that. A reduction drive on that would be great. Get the motor rpm up in the 4500 range and keep the prop tip speed down where it needs to be.

[@Bradofmaccly]

They do make a long belt system that sits the motor down low but believe it or not they make the boats handle worse. The weight up top lets and helps the boat lean in turns and it needs that to keep the sides from biting. A biting side can cause a roll over.

[@DeanofMachines]

Love the channel dude!! The variety and "figure it out as we go" experience is what I like!!

[@NoNonsenseKnowHow]

Thanks so much for checking the video out and I appreciate the support!

[@VINNY43098]

Chris rules!! Hes something else

[@DeanofMachines]

@@VINNY43098 For sure! Can't wait to see more of the wagon

[@CrazyPolishDude]

Big time. Hello from Belgium btw :)

[@AquarianSoulTimeTraveler]

@@NoNonsenseKnowHow you should do some foam board insulation and custom fit it to back sides and front for spash guards then fiberglass it too maybe. Also might want to make a ram air scoop cone for your intake.

[@brendanduffy2164]

Biologist from North NJ here. We drove to FL to buy an air boat with the same motor! A Lake management company up here would pay top dollar for this. And yes the air boats don’t hurt the lilies! We also treated invasive plant species in lakes with these. Lotta fun can take these anywhere. My only tip would be to move the seat back a little and higher to avoid bow spray.

[@PepperDarlington]

Buddy I found your channel a couple weeks back based on a suggestion. I've been laid up with a broken foot for days and all I do is binge watch you and a couple gardening channels. I'm hooked! Since I can't get out the house and mess with either fourwheeler project, my boat project, wrapping up my pole barn or finishing rebuilding the front end of my daughter's GMT400 Tahoe, I get to live vicariously through your content. Keep it up Chieftain. You're helping to save a working man from depression caused by being idle.

[@davidfarmer1666]

A fun boat for a ride. Keep Jen singing and it's good to see Guss out with you camping. You make great videos with great content.

[@clutchcanadian4110]

Hey Chris - Just wanted to let ya know that your videos give me the kick in the ass to get out and get my projects done. It's been hard to work up the motivation to do stuff because of the state of the world. This spring I wrapped up my automotive apprenticeship to become a journeyman but the camping season started off with my relatively new trailer having a roof leak that had turned into a mess. However seeing what you guys did with the Clapper gives me the motivation and confidence to say everything is gonna be ok with it, even if it's really frustrating. Thanks for everything you do, and I'm really happy to see the Air Boat alive!! Looking forward to the next video!

[@anthonyzornes8001]

Go get them done brother but do not forget camping

[@maniacaloffroad5338]

I know exactly what you mean. I broke 5 ribs in Feb. After a lengthy healing process I'm struggling to get motivated. I'm behind on everything. It takes one step to go outside and get started. We just got to take it easy as we re-adjust to an active lifestyle. We'll get it going

[@BigIronTexas]

protip, get some large sponges (like the ones you use when putting tile in) and use them to quickly get water out of your boat. kayakers use this method all the time. 🤙

[@NoNonsenseKnowHow]

Great idea!

[@richardthomas1743]

Hey Chris, Jen, Gus and Alex! That was a lot of fun! I can't believe how badly that Caddy motor was abused and neglected and how good it sounds now. I am really surprised at how well it is running. I always look forward to anything that you put on here, thumbs UP to you Chris! 👍👍

[@smplyizzy]

Totally impressed with the amount of stuff you can fit in your yard!

[@thorbjornthunell4788]

This channel is a true lifesaver! works 3shifts in a factory in Sweden manufacturing trainwheels. This week it's nightwork. Watching all your videos surely makes the nights funnier 😁

[@derpydog1008]

That sounds like a cool job.

[@jackme-off6690]

Terminator X and NOS! Great job on her, Great VID too.

[@VINNY43098]

Good thing jen kept happy during being stuck. Rememer your 4 wheeler in the winter time? Lol. Great video chris!!

[@rockyrf3]

I would definitely put a float switch on both of those bilge pumps, so when your taking on water and thinking of saving yourself you don't have to hit a switch to start pumping out :) I would also put an aluminum or fiberglass shield around the bow to deflect The water when She's trying to submarine on you .Hey Balls out, open her up and ride E'm Cowboy...My Style..:) Enjoy an Be Safe 👍

[@zacksrandomprojects9698]

Subscribed as soon as your wife said, " ...well...how much beer do we have?" Lol Shes a keeper! You should invest in a reduction box to put on the back of the motor. Get the motor RPMs up but the prop stays below 3000. Loved the videos. 🍻

[@gregdrmax]

Sitting here watching, and realizing how much work you are going through just to keep the camera on you and your work. I appreciate your channel!

[@user-ul3lf4qq7i]

Definitely do a part 4 can’t wait to see what else you can add to improve your airboat

[@RobMutch]

the neighbors must have been thinking...great! now he's got an airplane.

[@martyvassallo568]

Hi! I live in Australia and really love all your video's! Keep them coming, I'm learning heaps about motor mechanics from you and my wife love's Gus.

[@garyseaton4619]

Gus, the Chicken herder... Too cool... Now to the boat - that prop looks amazing... Watching to see how it works...

[@itsnotjunkyet1290]

Love the channel! Years back I raced in the mud with a Chevy Blazer, I swapped to a Caddy 500, 76 model. Drop on some old 472 cylinder heads the cc chambers are way smaller. Bumps up compression a lot! I then installed an Edkebrock performer intake and Sanderson headers! OMG this combo ran sooo good! Mountains of torque! Not a big RPM engine but ran great! I have one unused shorty Caddy header if you want it I’ll donate it to your project! Also swapping intakes and the exhaust manifolds will drop ALOT of weight! The drone shots are awesome!

[@LowestDifficulty]

i didnt know i needed an air boat until this series lolol caddyswampass is a hilarious name also love the fact you are using the most janky engine that came on the boat. I am amazed it doesnt even blow smoke lol

[@kenm1196]

I was a ditch digger for 31years!🤪 love your videos!👍

[@theroving1]

I think the next step I would do would be some sort of bow wave deflector. Awesome so far!

[@user-uz2de9bb8b]

I can’t wait for the next episode! Your couple shows me a real dream lifestyle!

[@kevinwettengel4653]

I love the name Bass Dumpster, LOL! Plus Swamp-Ass is a great name for the new boat

[@SinaShahsana]

It’s amazing that engine ran with no work being don on it with all the dirt and slug inside of it. That’s the real American V8.

[@russcollins4306]

Chris, you can pull the drain plug on your boat once you take off, to drain the water. Always plug it from the inside if possible.

[@cjcj7314]

yeah just stick ur hand where the propeller is u will be fine

[@xtr3m3fLx]

Should add 4" strips of puck board to the sides and back to help with swamping. Really enjoyed this series, earned yourself a new sub.

[@grosseileracingteam]

For powered boats less than 39.4 feet, or 12 meters, you need to have the following set of navigation lights. One all-around white light that you can see from 360 degrees and from two miles away; And one pair of red and green sidelights that are visible at 112.5 degrees and from one mile away. Get your VSC inspection and they will be very helpful, they just updated the fire extinguisher regs and you'll probably need a USCG-approved backfire flame arrestor on your carb. Easier and safer to comply than to get boarded an ticketed. Most local Sheriff's Dept with a Marine Division should also be able to advise/inspect. I enjoy your channel. Stay safe!

[@bethanyaustin333]

Finally! This is the series that brought me to your channel love your videos bro

[@bigbelconut]

I can't believe how well it runs, no smoke no miss fires. It looks like it can go anywhere.

[@glennoropeza3545]

So few parts to break! One belt drives a waterpump and a alternator, single 4 barrel carb and a direct drive 2 bladed propeller, no transmission or reduction gearbox. Goes where no boat can! Noisy but that's all airboats ! Simple and reliable!

[@TheMedic6488]

You guys have the right idea at your age you play hard and you work hard, wonderful time in your lives!

[@kennethsonier1766]

I remember the video of what that engine looked like when you got it,WOW what a transformation. Great montage of what's going on. Keep up the good work 👍☮️🇺🇲

[@JoeFpoc]

So impressive for a engine that was full of water take the beating youre giving it. I figured that thing was going to blow up after like 10 minutes

[@paulbrooks9327]

Definitely needs to be a part 4 💪👍

[@rippatoe50]

Good video. Thanks Chris for taking us with you on your trips and party times. Looks like you and your friends have a great time.

[@Dmenbiker]

Chris, incredible job on the swamp thing... The 2 stroke addition to the fuel was brilliant... You my friend are a genius...

[@derek7676]

I just subscribed. I’m in Australia and I’d love this boat. Cool factor of 10. The best thing is mate, you have good friends to enjoy it with. Love the channel

[@jonathanbowles2577]

Good Evening to Everyone at the NNKH Channel. I have just been watching a few of Your Incredible videos, I am very Impressed, You and Gen make a Lovely couple in Your videos. You are really Entertaining my Friends. Excellent work from such Wonderful people. Kindest Regards to You both and Gus. Jonathan. 😃😃😃😃😃

[@bryanewing5058]

About 28 minutes in…you just got unstuck. That was great watching you guys get unstuck. You will NEVER forget that! Good times!

[@jeremiahlittlejohn922]

You my friend are the man. Really cool project. Part 4 would be great. Love watching your content. Thanks for all the hard work in editing, one of the best channels on the Tube.

[@ALWAYSWORKINGROCKY]

all your videos are awesome. I love restoring anything that moves to. Keep up the great work..

[@NoNonsenseKnowHow]

Thanks, will do!

[@KENNEY1023]

We've been wanting one to go out into the Everglades. She has the best attitude, "how much beer do we have" 🤣 my kind of lady.

[@dgb56bgd]

AWESOME! This one was a REAL SUCCESS! Runs great, cruises great and even looks AWESOME! CONGRATULATIONS! Blessings.

[@garyhardee2720]

You need to build a makeshift bow improvement. Sheet metal would work. Or maybe find something from an old boat and attach it. Great video.

[@MaxPower-nw8id]

I recently found your channel and I'm hooked. Interesting vehicles, very well filmed and edited. I like that you show you and your friends out enjoying the fruits of all your labor. I also watched the Vegas road trip video and was impressed at your general mechanical ability. Keep up the good work.

[@bigbobvub]

Congratulations!! Looks like a good time! Love your channel and the great effort you contribute to make your channel succeed!

[@kylebarcomb6192]

One of my fav, vids you made so far ,looked like tuns of fun ty

[@rayscrafield2106]

Loving your videos. It looks like a real nice area where you are at. Not sure where that is but it's obvious you folks have a lot more freedom that we do here in the People's Republic of California. Vote wisely or lose it.

[@MikeSmith-sg4wu]

I'm one of your first subs and glad I took the chance you never disappoint on content love the Chanel

[@johnelliott7375]

Pure torque and as long as you don't over rev it or beat the old thing cold it will work for you. Great evening and weekend to you 5! Thanks for sharing your work and time. I will pass it on for you guaranteed. My 82 year old Dad and my Mom loves this stuff that you fix and enjoy.

[@georgekelly5338]

We always kept a couple of 10' retractable pool net rods on our airboat when I was a kid just in case you get stuck. This video series brought back a ton of memories.

[@johnelliott7375]

Best thing is you look , think, and accomplish in one stroke of the roller or pass of the welder. Awesome!

[@johnyb9884]

Gentle Ben was tv show in 70’s had this kind of boat

[@mattlevault5140]

Fun video! So glad that thing didn't turn any of you into a smoothie. Love the drone shots!! Spectacular addition to your content!

[@marcfechtner1074]

What a super fun build!!! Super cool!! Shocked at all the time and money spent - at first seemed like putting lipstick on a pig - but wow did it come out great!! Kick ass!!

[@clarencewiles963]

Fun all around and a little bit more work 😊

[@jlucasound]

Goldie runs so good. I'd bet that engine, with proper maintenance, will run for years. Probably (late) 70's vintage. Those GM Big Blocks were built to last. You got all the garbage out so if it lasts a month, it may last over a year. The thrust pressure on the crank "issue" is something to consider. The engine already paid for itself. That runs so good. Oh, redundant. 🥰😃

[@JMCKAY351]

Love the channel, always love watching to see what ur upto next👍👍

[@peterperigrino1403]

Dude that thing is freaking cool as heck......funny thing was when you were in front of Burlington island an paned around I could see where I live in Burlington city...thought that was kinda neat....great job on the boat....

[@mrshiney2]

So yea years ago about 48, when I lived in So Cal, my neighbor was an avid duck hunter. He had a pretty nice air boat. I did some errands for him and he invited me down to Mexico on a hunting trip. They had a sweet trailer right on the delta and would get up early am to go hunting back by 10 or 11. He gave me the rest of the day to to cruise his air boat through the tully weeds, SO MUCH FUN

[@donparker8246]

You did an amazing job on the air boat. Looks like you guys had a fantastic time. 😁👍😎

[@philthome1303]

Awesome job, dude. I admire your persistence and determination 👍🏁

[@michaelburke6552]

Life is a blast while your young enjoy every minute of it that you can. They will be gone before you know it and the golden years suck!! Great videos.

[@johnelliott7375]

Wow green mud! Crazy.

[@josephurban5549]

Your videos are so much for fun to watch them some of the other people I watch!

[@oldgeeser]

Lots of fun watching , great job .

[@rescuehoundemtd]

You guys seems to have the perfect life. I love seeing you guys have fun and do the camping.

[@vleldaddio210]

Thought this was just a car channel really surprised ! You are so talented tackling all types of endeavors 👍👏 I am watching every single episode started with the Torino working my way back !!

[@hankron5844]

Awesome from start to finish really enjoy the channel pretty amazing hearing that motor run as good as it did considering what you started with look forward to seeing more

[@adamcushman212]

My father had his 1968 Trojan 44' Motor Yatch at D&S for years. Many good memories from there! Awesome to see it's still a hot spot on the weekends!

[@208original]

What a great series for us to watch, great project! Some really great comedy also! Good job Chris, thanks!

[@ladozerwork1679]

Now that’s what I call living life to the fullest Chris you’re a great guy I’m Happy I found your channel bro

[@johngibson9307]

you guys had some fun with air boat.😀😀👌👋👋

[@philspear73]

Looks like a f*in blast, love that it's not using a drop of oil. Really enjoy your drone shots as well!

[@russellarendt5565]

Terrific video, waited months for the air boat launch but it was worth it. Keep them coming. Party down..☮️

[@garyseaton4619]

Now you throw in a RM250... What a great bike. Friends, brothers, had that and the RM370... So much fun. Hard to find because they're so good...

[@jlucasound]

The last (and only) RM 250 I rode, was a 1978. I was 16 and about 120 lbs and I LOVED it! That power band snap just about shoots you to the moon. I now ride a ZX-14. Stupid fast.

[@SuEnRoD]

Hula girl on the stick was the perfect touch!!!! AMAZING CONTENT!!

[@mikedowland9949]

Such a great project well done👌love it👍

[@WingmanJohnny]

Super cool 😎 video on the Swampass . And yes we fabricators do miss the little things some time. Great video. Great job. And yes paint the trailer and other things make it look as good as the engine. Keep up the great work.

[@jackbozarth4013]

Nice ride. Had one for a while. Duck hunting in Utah. Thanks Chris.;

[@wp9409]

Awesome followup, dude. Watched every minute. Nice job!

[@stevebaer8447]

Great Show..Watch all the time. Best Show so far was the Trashliner. Loved it, great laughs

[@skipstein744]

A great find! A step 4 is definitely a great idea. Onward!

[@thefakerscritic1397]

I think I would take some sheet steel and weld a top on it with a raised bow and stern. That way it would perform more like a real air boat hull. Cool project though! :)

[@rescuehoundemtd]

Loved this series and would love to see more of your adventures with this boat.

[@NoName-yr1jv]

That air boat is awesome 👍Well done !

[@davessparetime83]

Besides adding a bow extension maybe add 6" to 8" side and back extension panels up from the boat to deflect splash when turning and stopping quick.

[@blt3479]

Love your work and your vids Chris! The editing is superb! (love the drone shots - very cool)

[@NoNonsenseKnowHow]

Thank you man I appreciate your feedback and thanks so much for checking the videos out

[@lawnmowerdude]

I’m really digging your style of working with what you got and doing it right.

[@markduncan6690]

What A Joy Jen is! Lucky fellow is Chris!

[@7fhxnep7]

Love this kind of stuff Chris big thumbs up from the Netherlands.

[@montericci1910]

Awesome. It reminds me of a TV series I watched as a kid called Gentle Ben. (Although I don't recall them ever getting stuck.) Enjoying your videos - Thanks

[@stevecomb180]

Hahahaha. We’ve been watching y’all in the garage while we’re working on our trucks that airboat is hilarious… I think we need one now. 🤣 you guys are awesome.