NOT the O2 sensor, 2013 VW Passat P0140 and P1114 codes.

P0140 00320 O2 Sensor Circ., Bank1-Sensor2 No Activity Detected
P1114 04372 Bank1, Sensor2 Internal Resistance Too High

[@isalmankhan1]

Thanks for sharing Bro👍 Having service data is a blessing, it eliminates a ton of hassle😉 I was excited to see you do the programming part of this job, but maybe in another case study, plz film that if you're doing so👍 Stay Safe Bro👍

[@marcopon2185]

I have a 2013 , the codes I have are bank 1 sensor 1 , replaced that then I got “running too rich” , with this it checks the engine light on and it drives rough , it stutters from stop and gos at points it stalls out completely, throttle response is also very bad, but as soon as I clear the code everything runs fine , now it won’t stay on unless my foot is on the throttle , but again if I clear the code it’ll run perfectly fine

[@danktreez5115]

those are suppose to be that way. Have to cut them to unplug ecu. Similar to break off bolts in steering columns. Tamper protection

[@DallasAutoDiag]

Ya I fugured afterwards

[@eddievantailn2882]

Do you know if VW trouble codes are recorded by the vehicle ?

[@DallasAutoDiag]

I don't think so

[@benjaminlevi7792]

Good information thanks

[@user-oi4zd2or6z]

hello! I'm from Ukraine. I own passat 2012 2.5 CBUA. purchased at auction. after receiving the car, I found a break in the sensor 3 wires. and there are also errors p0140, p0141, p0146, p0147. replaced sensor 3. made measurements of the cable. did not find any damage. There is a suspicion that a breakdown in the engine control unit. I want to understand what to do with the control unit. Do you have a continuation of the repair? help me please. I have a vag com pro cable and a regular multimeter

[@DallasAutoDiag]

Hey, I would assume that the repair is more common in Europe than America. Not sure what to do in your case honestly other than replacing the pcm and programing it.

[@XenoRacing]

What about P0140 B1S2, P2181 Cooling system performance malfunction and P1338 Cam position sensor (G40)

[@DallasAutoDiag]

Not sure sorry

[@shikin7501]

This same rich of idling system bank 1?

[@DallasAutoDiag]

Sorry didn't understand

[@Jfjs58-g]

If the code comes back after a few days of driving you might need oem sensors..

[@DallasAutoDiag]

Good piece of information thanks

[@sweetjordan4868]

good video

[@htcuser]

I have the same problem. 2010 Passat. Do you have a good ecu person that can fix my ecu?

[@DallasAutoDiag]

Where are you located?

[@htcuser]

@@DallasAutoDiag Tucson AZ

[@Buttergreatness]

​@Dallas Auto Diag it looks like I'm on the same boat same codes

[@user-mf2yq1mc9k]

😅😅

[@DallasAutoDiag]

:) :)