STEREO HOOK UP ( Tuner EQ And Receiver Amp Wiring ) PART 1

Connecting Kenwood EQ Rreceiver Amp and Tuner Together link to part two • STEREO HOOK UP Part 2.

[@PrinceMichaels]

Wow! Thanks for sharing! I've been searching for information on how to hook up an old school dbx 4bx to my newer model Yamaha receiver but couldn't find how to do it until I saw your video! Thanks a bunch, very helpful and detailed!

[@not2fast4u2c]

Glad I could help I grew up using old school stereos

[@waqarulhaq9491]

I've been Googling for this kind of video since over a week. Finally i have found one and this video has given me so much info on how to hookup my hifi. Thanks a lot for making this video.

[@not2fast4u2c]

Glad I could help!

[@TheScStrat]

Yeppers, so did I. Had several "vintage" systems back in the day, but enjoyed the gun-metal-color series of Technics components. Have a SA-500 receiver, which is silver face/faux wood cabinet; found some gun-metal amps/tuners and receivers, and a few different EQs at a local flea market. Was just refreshing myself on the sequence of connections to the EQ; not all of the amps have the "Line Out/Line In" RCA jacks so was making sure to compensate for that. Again, thanks of posting and enjoy your technique. :)

[@davescott8859]

You're the man! Been trying to hooked up my vintage Pioneer equalizer and Pioneer Tuner, and how what a difference in quality of music (using yellows). Thank you Sir Not2Fast

[@azardmohammed2954]

Valuable information,yes old school equipment,did assist with connections,look forward for more videos

[@TheScStrat]

Nicely done, cuz. Was looking for other stuff and ran across this; for that person out there who *really* wants to go old school component but who is a neophyte, great explanations and step-by-step. The world of the audio chain can be a scary place. :)

[@not2fast4u2c]

Thanks for watching I grew up in the Era when this stereo stuff was top of the line It is hard to find decent Audio /Stereo equipment now that doesn't cost a small fortune

[@sting64az]

Radio Shack made some cool {add on} products back in the later 70's and to mid 80's..I used to have a {bass} enhancer that basically connected to your receiver like a {eq}..Worked nicely on older stereos with {tape monitor} button..If a low end receiver was lacking bass but had nice high end this product was great..Most older eq like the one you have there only had 1 input for a cassette deck...The was once a realistic {tape} control center that had 3 inputs/outs so you can add more to your eq.

[@mrmusdtard2]

Wow so very grateful my friend as i have the same set up as yourself and was wondering how i was going to connect my Vintage Pioneer SG-540 14 Band Stereo Graphic Equalizer EQ HiFi Seperate ,and now i know ,wonderful video and easy to understand ,many thanks and best wishes Brian.

[@not2fast4u2c]

Thanks for watching ...The old school stereos are what I grew up with and now they are antiques ..Compared to modern equipment

[@TerrilDKfursKing]

THANK YOU SO MUCH! After 4 hours of working to get an old 92 Kenwood stereo hooked up, searching various places, someone finally dumbed it down enough, to my level. Having never worked on old analog stereo's I didn't know that there was a specific line out and in, for pre amp, that went down into the equalizer and then back! You saved my night, when you made this, back in 2012!

[@not2fast4u2c]

Glad I could help Thanks for watching !!!

[@bigjr8675]

Equalizers is the old school way and the best way

[@TheLeadClown]

Cheers for that, I realised where I was going wrong with my power amp connection!

[@not2fast4u2c]

Thanks for watching

[@mikebalch1799]

What insignia receiver was used in video? I have a KLH with the same rear hook up panel.

[@patriayvida4209]

THANKS FOR YOUR INTERESTING VIDEO! VERY HELPFUL! I LOVE THE WAY YOU EXPLAIN EVERYTHING TIME AFTER TIME... KEEP IT UP LIKE THAT! HAPPY NEW YEAR!

[@not2fast4u2c]

Thank You for Watching !!!

[@jeremyrobinson1458]

Just what I needed...thank you soo much !!!

[@not2fast4u2c]

Glad I could help Thanks for watching..

[@Ridge2303]

This has helped me a lot with hooking up my old school system. I have the (Audio Source AMP One Stereo Power Amplifier, and a ADCOM GFT - 1A with a ADCOM GFP 1A) set up that I have been trying to get it to play back from anyone of the source's. I hope I can come back for more help. Thanks

[@not2fast4u2c]

Thanks for Watching !!!

[@anthony2010707]

thanks for your video, I have a question, I have a preamp and a power amplifier, If I fallow you I I would run the pre out into the equalizer and then into the power amplifier, thanks, awaiting your reply.

[@bummetalhead]

Not 2 Fast For U To C, I got a Sony STR-K402 AV Receiver and it ain't got Pre Amp Out or In Hookups but it does MD/ Tape In and Outputs will my Receiver work being hooked up that way I got a ADC Sound Shaper Five Equalizer?

[@connor8560]

hi I have got an amp but it has no sub out just L+R out but I don't want to spend more money on another amp. is there any way I can connect the sub through the L+R out? its not anything to do with EQ but I hoped someone could help.

[@not2fast4u2c]

I welcome the input you had I don't know much about this EQ

[@marthaseasons8815]

My boyfriend used sandpaper great video very informative

[@brig.4398]

i have a mitsbishi system, the amp has equalizier input & out jacks, amp has jacks labeled input & output. I've tried different ways but can only get a little sound.

[@athenaharris7328]

I loved just listening to you.

[@not2fast4u2c]

Thanks for Watching !!!

[@willismadison2844]

can i hookup a 250w studio standard by fisher amp to my sony receiver ?

[@vansonmafeet734]

What if you are trying to hook up an EQ between the receiver and a 2ch. external amplifier??

[@Benguiatboy]

Thanks for the video Mate. Good job!

[@not2fast4u2c]

+Boxib Thanks for Watching !!!

[@chaulol12345]

Thank you so much very helpful Happy holidays to you all

[@not2fast4u2c]

Thanks for watching !!!

[@sphenoidjjj]

How do connect a tape deck up with having the equaliser and amp connect as you have demonstrated?

[@importdoc7]

I’m trying to add an Onkyo amplifier into my receiver to power up a set of 901 Bose with the Bose EQ. Any ideas on how to wire this. Thank you.

[@alanalex1912]

Thank you , that video help me a lot.

[@sting64az]

My components consist of a Philico CDR recorder {785},Sony cassette deck TD-WE425,Sony mini disc MDS-JE-510,Sont DAT recorder A6,Pioneer 8 track recorder RH-60..All connected to the eq for recording and playback purposes..But I play it back without eq since it was eq recorded..My speakers are JBL studio series speakers..I love that studio/concert sound at home..

[@retromasterhd1607]

I can honestly this video helped me understand how exactly the equaliser fully works, you have my full thanks. 👍🏿👍🏿😀😀😄😄

[@not2fast4u2c]

Glad I could help thanks for watching

[@retromasterhd1607]

@@not2fast4u2c: 😄😄😀😀

[@NAdame-js1ce]

Thank You for the info. Helped me hook up my system 👍

[@not2fast4u2c]

Thanks for watching

[@kemix6453]

Can l use my Onkyo TX-NR509 to Bose 901 Series VI with active equalizer? Anything I need to add to make hook up works? I need your suggestions as soon as possible. Thank you guys.

[@bummetalhead]

And do I turn both Power and Tape Monitor Switches on or just the Power Button turned on to make it work?

[@caloylabrador2487]

Great demonstration and lecture.....

[@not2fast4u2c]

Francis Labrador Labrador Thank You !!!

[@highhat5229]

if you daisy chain a load of amps together will I only need one graphic equaliser?, because the amps are all on the same signal....???

[@ricomartin8720]

How do I hook up a Kenwood KA-127 intergrated amp to a Kenwood KM-106 amp??

[@freddyrincon1481]

My old receiver has tape outs but then indoninlisten to music..or can i through Bluetooth if the receiver has to be on tape

[@hardwareGQ]

Please help. i have Nad 3240PE, i am using it as a pre-amp, it is connected to a power amp Techincs A900S MKII, i connected it by cable that goes from NAD pre-out to Techcnics input. So pre-out on Nad is now taken. How can i connect Yamaha EQ70 equailzer to my system? Thanks guys.

[@geraldwilliams8119]

I need some help. I have a aprox. 1985 Marantz graphic equalizer EQ 140 10 band. I have a Sony Audio/video control center about the same date. My receiver doesn't have a pre amp. Eq has line in, lineout on the back, tape in rec out. will they work together? Thanks Jerry.

[@chevyford1400]

Thanks men it help me a lot

[@ROBERTJ986]

Any system control or remote 3.5mm is a mono cord input to sync all stereo components together that way they all are compatible and remote ready

[@81keyholder]

The XS was for other kenwood components. i.e if you pressed play on a cd tape/ dvd player, then the amp will auto switch to that unit. they were basically a cable with a headphone plug on each end. The control system was either SL16 or SL32 SL16 was for older equipment.

[@not2fast4u2c]

81keyholder Thanks !!!

[@OlRuss-ki8go]

it also allows the remote to Function all components

[@1a2e58]

Where do you put the aux cable in?

[@sting64az]

I have 2 of those {tape} control center since I have lots of components connected to my newer Onkyo TX-8050 2 channel net receiver..This receiver has the old school {phono} input and with the latest WRAT technology..This system has a audiosource (2002) stereo eq..Connecting this eq to the receiver and crossed bridged to the {tape} control centers and back to the eq and monitored back to the receiver takes a little more homework to get it all done right..

[@krisvirgin]

Hello, I'm wanting to add an pre-amp to my Kenwood VR-6070 for some bigger floor speakers that need more power. The receiver does have pre-amp outputs which is good. The amp I'm looking at is the Kenwood KA-828. I'm not sure on the amp where to put connection plugs from the pre-amp out jacks on receiver. Thx for any advice.

[@jenniferflores3974]

If you are adding an external amplifier (2,3 or 5 channel) to your receiver, you are going to use the corresponding "pre-amp" outputs from your receiver to the inputs on the amplifier. You are basically bypassing your receivers built-in amplifier and using the external amp, taking the signal path out from your receiver thru the amp and out to the speakers. Cheers!

[@kennyharger1263]

How to hook up a Kenwood vr,-209

[@czarguzman2927]

Hello Sir, this is what I have and what I'm trying to achieve. I want to hook up my turntable to my receiver and then to my equalizer but I'm not having any luck. I could hook up my cassette deck and use it with the equalizer but not with the turntable. My receiver has inputs for phono, cd, vcr/line, tape 1 and tape 2 rec and play but no output. Any suggestions or comments? Thanks

[@arvinramnarine1324]

i dont hav amp in but i have pre out and my receiver is a tuner/amp/pre amp. my EQ only has rec outputs and my receiver only has one rec in

[@tuan16582]

Hi, I love to watch your videos because you pointed out clearly. My question is my TV doesn’t have HDMI out put, only 3.5 mm audio out for headphones. I want to connect this to my amplifier, so will I connect it to Aux or others like CD....?

[@hbsbos]

connect it to what ever you like as long as you remember which one. now I would feed into the Aux input.

[@kingaura480]

thank you so much this helps me a lot

[@not2fast4u2c]

Glad it helped!

[@coffinrot8383]

Thanks so much for this video. Very helpful.

[@not2fast4u2c]

+Coffin Rot You are Welcome ..Thanks for Watching !!!

[@torypoole4809]

can I run a sub out wire from a Pyle hybrid amplifier into an aux in on another identical Pyle hybrid amplifier...???

[@not2fast4u2c]

THANKS for the info I may find a manual online

[@Ianbigga]

what if my recever only has pre-amp out, left and right. but no pre amp in?

[@prettyricky3765]

Whenever I power my pre and eq on the eq power level goes way up and 1 of mu amps don't turn off automatically when switch on the rear of amp is on supposed to turn off automatically one won't

[@francescocasolaro1702]

Grazie mi è stato di aiuto.

[@lyndaleetqpv]

What if you dint have pre amp out.

[@not2fast4u2c]

That is where I buy My $4 ear buds for the laptop they are as good as some of the spendy ones

[@bonginkosiosborne2640]

Verry informative video 🙏🏻🙏🏻 I have Pioneer CR 333 equalizer, I want to connect to Sony receiver STKR_1500. My problem is I dont know what to select between Multimedia or MD/Tape. Please assist me 🙏🏻🙏🏻 it been a while this equalizer is not connected on my receiver. Thanks in advance.

[@middledigit1]

hehehe it just goes on and on and on and on.....its litterally 30 seconds worth of work. This guy has time to buuuurn!!!!!! :O)

[@monsimsezenem6612]

Why don’t you make a you tube video and explain in 30 seconds. So that we don’t waste our time,

[@hughjardon8316]

YOUR ABSALUTLY RIGHT ABOUT THE EAR BUD HOOK UP BUT CHEAP IN THIS CASE IS NOT BETTER I FOUND WITH THE CHEAPER PLUG IN (store bought) static was an issue if you appreciate quality sound go with the gold plugs better quality of sound no hiss on another note I have old school sansui equipment line in to tape out line out to tape in ROCK ON

[@anthonybyers6399]

thank alot really help me

[@not2fast4u2c]

Thanks for Watching !!!

[@not2fast4u2c]

You are Welcome Thanks for watching

[@makilikudy]

Hola a ver si puedes ayudarme. he adquirido el amplificador Su-V460 y también un ecualizador Pioneer gr333 y no se muy bien como conectarlos ni para que sirve la rueda de debajo, podrías ayudarme, gracias

[@doubleblindtest4649]

How do i connect my equlizer to my DBX 118 and Kenwood DA-1100EX it Doesn't have a Pre-Out?

[@travisl.campbell8487]

You'll probably want use the tape monitor Rec/playback & line in/out on both the receiver and the EQ, in series to utilize the equalizers frequency functions for an improved {Hopefully} HI-FI sound in your living/sound stage room...etc. etc.. Remember to press "Tape-monitor" on your receiver/tuner pre-amp to switch from source to EQ direct, to either listen to stereo, tape, CD, DVD, etc. etc... to listen to your music/movies/streaming/network formfactor either EQ'd or not EQ'd, depending on the source or direct position. Hope that helps!? Uughh, "Old-school", it's coming back to me, ?...I Think?...Yeah! Got-IT! Travis LC...

[@robertkanyike7157]

your information was very helpfullthanks

[@not2fast4u2c]

Glad it was helpful!

[@delta3garcia]

My Marantz NR1710 doesn’t have a tape or the pre amp in/out. 🤷🏼‍♂️🤦🏼‍♂️

[@guiroboscoguiro9396]

Como faço pra estalar o amplificador kenwood

[@drexmz9703]

Hey man, I have a question and I see that you’re still responding to comments 10 years later so I have a it has a out but it’s one not two it has one black out can I run it without having the equalizer go back into the receiver

[@not2fast4u2c]

the purpose of having in and out is to equalize the sound before it is amplified to go to the speakers You cannot put a bunch of amps into an equalizer if you had a left and right out low power you could come out and go to the EQ andthen run the EQ into an Amp I am no expert on this you should find a stereo tech before doing any odd ways of hooking up any thing

[@kevinjaye7267]

Well I've rebuilt my Technics rack system and after looking to see how to hook up the EQ , I can't because my reciever did not have the pre in/ amp out . Soooo... The hunt is on for one that does. Thanks for the clarity.

[@tonymcrae6510]

Kevin Jaye do same thing but with tape 2. Then hook your other stuff up accordingly. Hope that helps

[@rodenthideout]

thanx this helped me to hook up my system

[@not2fast4u2c]

You are welcome ...Thanks for watching

[@_xcursion_5392]

I have a marantz pm 630 receiver and it has a little peg thing in the preamp out and in but it's metal and I'm not sure if it has to stay there. Any help?

[@_xcursion_5392]

@not2fast4u2c

[@not2fast4u2c]

Thats just a jumper like a jumper wire that is what you remove to run the wires to the equalizer and back

[@sting64az]

If you have a {99 cent store,dollar tree,family dollar,ect.} you can find audio and video cables there for a dollar..I prefer "Uninex" brand that my local 99 Cent store carries on regular stock..Its a 6ft. audio {oxygen free} patch cable and works great..Any other audio brand cables will work fine..This is a excellent choice if one is on a tight budget..

[@timbabyfacesavage377]

So I've had my beautiful pioneer tx-9500ii and sa-9500ii by themselves for years now. I finally found a matching sg-9500 EQ mind you I haven't used an EQ for years. Needless to say you're video helped me remember how to hook it up lol. Also what's your opinion on the whole tape in & out vs pre out & amp in argument? Some people say it's unsafe to go threw the pre-out & amp-in is this a bunch of bs ?

[@not2fast4u2c]

I would only use pre amp out and in Common sense You EQ the signal before amplifying it You would not send a bunch of amps into an Equalizer I never tried tape in and out because I want that for taping only

[@timbabyfacesavage377]

@@not2fast4u2c right on thank you sir I really appreciate it.

[@js0009]

My uncle has a kenwood receiver a technics eq connected though the tape a monitor a on the receiver

[@PyroUser55]

Couldn't you just run it from the source to the eq in, then out into the AV input on the back of a reciever?

[@george25199]

But Then your limited to one source

[@tluva1020]

​@@george25199what about RCA splitters??

[@blueboy4u2]

I have a Yamaha RX-V565 receiver and want to hook up an equalizer Kenwood GE-4030 but my receiver does not have the pre out nor the amp in hook ups, so how should I hook it up?.

[@hughjardon8316]

LINE IN TAPE OUT LINE OUT TAPE IN

[@blueboy4u2]

Thanks!.

[@todddeloplaine2452]

+Joe lopez i also have a yamaha rx-v592 rec and a vintage equalizer from radio shack and just did it play in rec out and it work s on my tuner cd player and my tape deck sound s great

[@paconasser5888]

Bakit wlang fungtion yng connection ng spiker sa 1100watts na spiaker conection pero sa center speaker at surround ay gumagana rin?

[@jorgem50]

Just bought an eq for my home receiver...I can't figure it out. I don't know if the eq is bad or my receiver is bad. I tried tape out/in on the receiver and nothing. I tried vcr in/out and nothing. So frustrating

[@george25199]

Try the receiver first if that is good try the EQ. Just a process of elimination.On some EQs one side will only work or not at all.

[@jorgem50]

@@george25199 I think it was an issue with my receiver. I tested the eq with a vintage receiver and it worked.

[@bokeedproducer9944]

my amp only has aux dvd & line in....hw do i hook up the equalizer??/ |plzz help

[@vipersingh6974]

connect your input to the equalizer, the connect the output of the equalizer to the input of the amp

[@blazinspike9325]

I like your video and if you have multiple stereo equipment how would you consider hooking it?

[@not2fast4u2c]

Willie Emmart Every system is different I would have to have it in front of me to figure it out

[@blazinspike9325]

OK thanks

[@mikecombs8850]

@@not2fast4u2c hey how do i hook up my pioneer sa 9100 amp to my pioneer sx 750 receiver?

[@drewlord6525]

Do you know what ADP means

[@70sRockNRoller]

What if your Amplifier doesn't have an "Amp In" connection and only has a "Pre-Out" connection? Can you still connect an Equalizer to it? If so, what connection would you use? Mine also has built-in Bass, Treble and Balance control knobs. Will the Bass and Treble from the Amplifier be bypassed if an Equalizer is connected to it?

[@Ray-lq8dg]

I don't have a Pre amp, Had it hooked before, butt been years, I have a Kenwood KR-V 7230 No Pre amp on it, Has Tape 1 and 2 tape 2 is moniter, Had it hooked before, getting signal thru the equalizer, not sure if going back into Equalizer correctly, I have a Kenwood Equalizer coming I bought off EBay , Very nice equalizer,,,,,,Want to hook it up correctly

[@not2fast4u2c]

+Ray Riddick Thanks for watching ...hope this helped

[@not2fast4u2c]

I am no expert But I will give It a try What do you need ???

[@romademartini4693]

He's using a practice arrow for his teaching tool. Shoulda used a broadhead.

[@garylewin1872]

Brownwire plus or negative

[@MOZYBLIXK]

do you have a facebook for explain you from there plss

[@not2fast4u2c]

You are welcome I like my EQ it makes my new cheap reciever sound great Thanks for watching

[@not2fast4u2c]

I am not sure how

[@AdikMusicOfficialTM]

hey my amp have a rec line and aux? only? how to connect the EQ? sorry bad english?

[@not2fast4u2c]

You have to have pre amp in and out to use an EQ

[@AdikMusicOfficialTM]

no sir MY OUT/IN PUT CD/AUX / REC / LINE ONLY!

[@not2fast4u2c]

That's what I meant was you cannot connect an EQ Like I did without having a Pre Amp Out &In

[@AdikMusicOfficialTM]

OK SIR THX *

[@RumbleFish69]

Thanks for the tutorial!

[@not2fast4u2c]

You are Welcome !!!

[@todddeloplaine2452]

ok well if you ever want it just let me know thank s todd

[@Piolv]

You should make a video on how to hook up a tape deck to a reciever

[@gastondonoso3883]

Nicely done! Thanks a bunch!

[@not2fast4u2c]

Very welcome!

[@NintendoPsycho]

Vinyl > mp3

[@raymondgomez7245]

can I hook up a Yamaha av receiver to a Yamaha digital processor

[@not2fast4u2c]

I would not know unless I had them in front of me to look at

[@not2fast4u2c]

Then It should go to an Amp and then the Amp would have speaker out puts That is how alot of car stereos were try Ehow .com I have found manuals for stuff there

[@ROBERTJ986]

But only if all components are made from the same company

[@johntoothilljr.5328]

To much B.S.! I don't have a pre amp set up, It's built in , then how do u hook it up?

[@bmanh2355]

Should be connected to the REC OUT then to the Line in on the EQ. The Pre-Amp output is variable with the volume control so NOOOO Good

[@AwakenedAnhedonic]

Too bad my receiver doesn't have that functionality, but my guitar amp does so I can make a sweet preamp for it.

[@not2fast4u2c]

+Awakened Anhedonic The old stereo stuff had a lot more features

[@AwakenedAnhedonic]

+not2fast4u2c At least I still have tape, tape 2 for 3 head, and phono. And I use them all. My alternative to the preamp out and power amp in is to amplify the signal, do the effect, then attenuate back to unity line level before the receiver's preamp.