Nothing cuts better than this.

  Рет қаралды 40,708

Start Making (Woodworking)

Start Making (Woodworking)

Күн бұрын

Пікірлер: 190
@startmaking1
@startmaking1 Жыл бұрын
Just a quick one this week. I hope you enjoy it. Do you have a workshop sign? I'd love to see them.
@michael_h
@michael_h Жыл бұрын
Please try pushing the rasp exactly along its longitudinal axis. You will remove even more material and get a perfectly smooth (as if planed) surface. This works because in this direction, the individual tooth edges overlap to act like a single edge across the rasp's width, i.e. like a plane. It's not quite as ergonomic, but the results are worth it.
@budduggly7781
@budduggly7781 Жыл бұрын
One of the best, most effective tools I have ever used! I will never give mine up!
@startmaking1
@startmaking1 Жыл бұрын
Couldn't agree more!
@HarisWoodshop
@HarisWoodshop 10 ай бұрын
I’ve used my Shinto on many projects. This tool is so underrated and unknown amongst woodworkers. Very satisfying to work with aswell. Thanks for the video 👍
@startmaking1
@startmaking1 9 ай бұрын
I agree. I saw it and after seeing the results I looked for one and was astonished by how well priced it was.
@theofarmmanager267
@theofarmmanager267 Жыл бұрын
Thank you for this. It just shows that, after more than 45 years of woodworking, you can still learn. I’m not a great user of rasps - I have several but I rarely find the need to use them - no doubt, if I did more exterior and/or large work, then they would be used more. I make mostly interior pieces and rasps are generally not needed. Bit, if I need to get another or replacement rasp, I will certainly try out a Shinto rasp.
@startmaking1
@startmaking1 Жыл бұрын
Hi Theo. More than welcome. It's hard to know if something is worth the cost if you aren't going to use it all the time. After all there are work arounds that Im sure you have like low grit sandpaper. But like you say, if you ever need one, at least they are fairly inexpensive.
@myerscok
@myerscok Жыл бұрын
Shinto is a really useful tool. I’ve had mine for a while now and I find all sorts of uses for it. I highly recommend it.
@startmaking1
@startmaking1 Жыл бұрын
Hi. Thank you for commenting. Great to hear that other woodworkers agree.
@sueb4154
@sueb4154 Жыл бұрын
I could not agree more about the Shinto. I made 3 reindeer, as a Christmas gift, out of fallen hurricane tree logs and branches. I ground the chamfers for the legs and necks, as well as rounding off the bark on the bodies and heads, in no time at all. I can't imagine any other tool, removing so much material with that much speed, accuracy, and safety. P.S. Love your new sign!
@startmaking1
@startmaking1 11 ай бұрын
Great gift by the way. Really nice use of fallen wood. Shinto for the win too. Brilliant. Hope the hurricane didn't cause you too much damage.
@infj-tguy6275
@infj-tguy6275 4 ай бұрын
5:04 Thank you for the demonstration man, i'm Definitely gettin one o' these things 🤩🤩🤩
@startmaking1
@startmaking1 4 ай бұрын
very welcome. Thank you.
@christopherharrison6724
@christopherharrison6724 Жыл бұрын
Yes the Shinto wrasp is an impressive tool use mine all the time.
@startmaking1
@startmaking1 Жыл бұрын
Hi Christopher. I can't believe it took me so long to get one. Thank you for watching and commenting.
@deangriffiths8107
@deangriffiths8107 Жыл бұрын
I found one of these a few months back at an antique shop, probably a pound or two. It was rusty but after an electrolysis bath it was as good as new. Brilliant tool.
@startmaking1
@startmaking1 Жыл бұрын
Wow. Great find.
@davidiand7
@davidiand7 Жыл бұрын
I admire your patience in making all those letters by hand well done!
@startmaking1
@startmaking1 Жыл бұрын
Hi David. Thank you, At least they were a little easier than the sign that is on by back wall. They were smaller and much harder. In truth I find it restful and the rasp tool hours off the time.
@kenspears7159
@kenspears7159 Жыл бұрын
I've had one for years, the Shinto is awesome!
@startmaking1
@startmaking1 Жыл бұрын
Agreed. Thank you
@larryblackmon2341
@larryblackmon2341 Жыл бұрын
My brother gave me one for my birthday and I absolutely love it.
@startmaking1
@startmaking1 Жыл бұрын
That is a great gift. He must be a woodworker too
@Ed_Robson_1970
@Ed_Robson_1970 Жыл бұрын
I use one of these and keep a load of the micro shavings that it produces for the old wood glue and sawdust filler trick to cover any mistakes or blemishes. The crucial part is that they are tiny shavings, not dust, so are great for this purpose.
@startmaking1
@startmaking1 Жыл бұрын
Hi. That is a great idea. Sometimes the dust just makes a messy putty/plastic finish.
@Lennart1995
@Lennart1995 Жыл бұрын
Great idea!
@Vikingwerk
@Vikingwerk Жыл бұрын
I got one of these myself, and am super impressed with it. In softwoods, it cuts hilariously fast, and in hardwoods, still fast enough to let you make mistakes😜(cut to far) if you don’t keep an eye on yourself. I use it a lot to cut tapers on garden tool handles when fitting them up, works great!
@startmaking1
@startmaking1 Жыл бұрын
You are so right. I tend to get carried away just like I do with a hand plane. Just get mesmerised by the sound and feel.
@LpDesignBuid
@LpDesignBuid Жыл бұрын
Enjoyed the video. I have not used this product but it was good as demonstrated. Thanks
@startmaking1
@startmaking1 Жыл бұрын
Thank you.
@williamn01
@williamn01 Жыл бұрын
The 2nd side looks really cool ,love the sign .
@startmaking1
@startmaking1 Жыл бұрын
Hi William. Thank you very much. For a last minute decision I am glad I did it.
@MatthewHarrold
@MatthewHarrold Жыл бұрын
I picked up a saw rasp (same brand) about a year ago. It does everything I need for convex curves, waste removal, and fine tuning. It hasn't noticeably dulled at all yet. Yep ... bloody brilliant replacement for flat rasps and files. $0.02
@startmaking1
@startmaking1 Жыл бұрын
hi Matthew. Thank you for watching and commenting. I wont go back now and will clear out some of the files that will become redundant. There are jobs that I am sure this wont manage but like you say, anything that is not concave, this is the first tool I will grab.
@Genezilla
@Genezilla Жыл бұрын
Never even knew these existed! Just came across your channel and the content you've been putting on is terrific. Really enjoy how you explain and demo the tools you're using. Great stuff!
@startmaking1
@startmaking1 Жыл бұрын
Hi Gene. Me neither until fairly recently. And thank you so much for the kind words. I am glad you found the channel. Feel free to comment across any of the videos, questions, advice and feedback always welcome.
@1971wizzard
@1971wizzard Жыл бұрын
I agree, just discovered your channel, great clear presentation, and just love the projects… refreshing 📸📸
@startmaking1
@startmaking1 Жыл бұрын
Thank you so much. Very appreciated.
@bhartissimo
@bhartissimo Жыл бұрын
I bought a shinto rasp more than two years ago and it's been brilliant. That, along with the two half round iwasaki files I got last year, take care of all my rasping needs.
@startmaking1
@startmaking1 Жыл бұрын
I bet it is really handy in what you do. I had another comment from a guitar maker who used it a lot in shaping the neck. I can see how that would be a great use of it. Among many other.s
@bhartissimo
@bhartissimo Жыл бұрын
@@startmaking1 That's why I got it in the first place. But I now prefer using a spoke shave to shape the neck, after starting with the shinto rasp.
@startmaking1
@startmaking1 Жыл бұрын
Spoke shave for the win . They are a delight to use when tuned right.
@FoodInDaHood
@FoodInDaHood 2 ай бұрын
I am glad you didn't mistakenly put an F in place of the M ! 😉🤣
@startmaking1
@startmaking1 2 ай бұрын
I definitely should have made the letters magnetic so I could interchange them and see if people notice.
@Birkguitars
@Birkguitars Жыл бұрын
Have to say I LOVE shintos. They cut through so quickly but with care and focus on grain direction the fine side can leave a finish equivalent to 100 grit. Another cool feature is that the edges have teeth as well so it is possible to cut straight down if there is enough space for the width of the rasp.
@startmaking1
@startmaking1 Жыл бұрын
Hi Dangnabbit. Great point about the straight cut. I will test that this week. Thank you
@thesawwdustshop
@thesawwdustshop Жыл бұрын
Great idea for a sign!
@startmaking1
@startmaking1 Жыл бұрын
Thank you very much. Let's hope it works. (not for sawing )
@turkeytrac1
@turkeytrac1 Жыл бұрын
I'm in Alberta, I've had one for 5 yrs. It's great.
@startmaking1
@startmaking1 Жыл бұрын
hi in Alberta. Hope you are well. Thank you for watching. I had no idea that they even existed until recently. Not sure where I have been lol.
@marianneshepard5980
@marianneshepard5980 Жыл бұрын
If you make the letters with a magnetic strip on back, they are easily interchangeable. Love the video, just ordered the
@startmaking1
@startmaking1 Жыл бұрын
what a brilliant idea.
@MASI_forging
@MASI_forging Жыл бұрын
That is an incredible video.👏👏
@startmaking1
@startmaking1 Жыл бұрын
Hi Masi. Most Kind, thank you.
@SB-qm5wg
@SB-qm5wg 4 ай бұрын
That's pretty impressive
@startmaking1
@startmaking1 3 ай бұрын
Thank you very much.
@geoffreyboyling615
@geoffreyboyling615 Жыл бұрын
Yes, I have a couple of the Shinto Rasps, they're excellent! I make knives, and I use a Shinto Rasp and a couple of handstitched cabinet maker's rasps to shape the handles But be careful as a Shinto Rasp is a dangerous tool -- it can get you hooked on Japanese tools.
@startmaking1
@startmaking1 Жыл бұрын
Oh I bet it can. I have been eyeing planes. The thin long shavings look amazing.
@nobuckle40
@nobuckle40 Жыл бұрын
I bought one of these about 3 or 4 months ago and I love it. It works better than any other wood rasp I've used.
@startmaking1
@startmaking1 Жыл бұрын
Hi Doug. Absolutely agree. Thank you
@themeat5053
@themeat5053 Жыл бұрын
Glad you found the saw rasp. I've been shaping things for years with one. Can't beat it for removing stock quickly. Next, you should be onto vintage "hand picked" files. That may not be the correct term, but what I mean is a file that a human has made each tooth on the file. I'm still using Grandpa's; mainly, because I use the old vinegar trick to keep them sharp and clean. Another, great video, Mark. Finally, when you get another old saw, you can learn how to sharpen and set the teeth. You aren't going to buy a modern saw as good. Cheers!
@startmaking1
@startmaking1 Жыл бұрын
Hi. I was genuinely surprised. And not at all expensive. Now you are getting me tempted to buy more tools. That's usually my job . I actually. picked up a large and a small tenon saw in the auction lot I got, both look lovely, and brass backed. They are, however , blunt. Also my Japanese saw didn't like the screw it found and so needs some teeth realigning. I think that a learning weekend is in order for me. And soon. Should be a lot of fun.
@themeat5053
@themeat5053 Жыл бұрын
@@startmaking1 Have a good weekend and keep on tooling.
@startmaking1
@startmaking1 Жыл бұрын
@@themeat5053 Back at ya, Enjoy whatever you have going on.
@1pcfred
@1pcfred Жыл бұрын
I can easily beat it with a rotary rasp.
@jimbucket2996
@jimbucket2996 Жыл бұрын
It's a great rasp but it doesn't replace everything, it just adds to the arsenal.
@startmaking1
@startmaking1 Жыл бұрын
Hi Jim. True. Cheeky thumb nail, sorry.
@richarddegen6184
@richarddegen6184 Жыл бұрын
got one, it's great!!
@startmaking1
@startmaking1 Жыл бұрын
Agreed. Thank you
@ScarletEyeMoon
@ScarletEyeMoon Жыл бұрын
That's a good idea for cleaning up hardware!
@startmaking1
@startmaking1 Жыл бұрын
IT was pointed out in the comments that if you do use vinegar and sand paper that you open fresh metal up for rust So you should oil afterwards. I did and had to take it out of the video as the letters wouldn't stick and there was swearing and then cleaning again. But for a general tool it was good advice to oil afterwards.
@ScarletEyeMoon
@ScarletEyeMoon Жыл бұрын
@@startmaking1 Oh yeah that is a great tip too. what kind of oil would you use?
@startmaking1
@startmaking1 Жыл бұрын
@@ScarletEyeMoon to be honest, I use 3 in 1 oil on all my tools. But there are smarter people out there than me.
@ScarletEyeMoon
@ScarletEyeMoon Жыл бұрын
@@startmaking1 Yeah I guess even motor oil would work. What is 3 in 1 oil? I imagine 3 oils but what are they? Yeah there's always someone smarter but I sure enjoy learning from people like you and other wood workers
@startmaking1
@startmaking1 Жыл бұрын
@@ScarletEyeMoon this stuff. www.screwfix.com/p/3-in-one-oil-drip-can-200ml/59982?kpid=59982&cm_mmc=Google-_-Datafeed-_-Auto%20and%20Cleaning?kpid=KINASEKPID&cm_mmc=Google-_-TOKEN1-_-TOKEN2&ds_rl=1243318&ds_rl=1241687&ds_rl=1245250&ds_rl=1245250&gclid=EAIaIQobChMI3MmopPDw_wIVDIpoCR1o0g7QEAQYASABEgI_rvD_BwE&gclsrc=aw.ds
@1pcfred
@1pcfred Жыл бұрын
I have a Shinto rasp and I have rotary rasps. The Shinto is no match for rotary rasps. Pro tip: The next time you paint something small put a piece of solid wire through it. That way you can paint all of it and then hang it up to dry. I use 16 gauge tie wire but some old metal coat hanger would work too. You'd like one of my scroll saws for cutting letters out. You can pretty much take them right off the saw.
@startmaking1
@startmaking1 Жыл бұрын
I watch a lot of sign makers and their scroll saws on Instagram. Looks like a great tool
@1pcfred
@1pcfred Жыл бұрын
@@startmaking1 scrolling is a craft unto itself. The work you can do on a scroll saw is unique and impressive. But it's not traditional woodworking. You can do letters like you cut out real easy though. That's scroll saw 101 stuff. There are some tricks to scrolling like the packing tape trick. You wouldn't think glue is a lubricant, but it is.
@infj-tguy6275
@infj-tguy6275 4 ай бұрын
2:36 Lookin good bro!
@startmaking1
@startmaking1 4 ай бұрын
Thank you.
@EngineerMikeF
@EngineerMikeF Жыл бұрын
You can radically improve maneuverability with the jigsaw by chucking it up in your Moxon upside down, then move the stock instead of trying to maneuver the saw. I suggest good leather gloves for this type of work.
@startmaking1
@startmaking1 Жыл бұрын
Brilliant idea Mike. and thank you. I wold definitely need the gloves.
@normanbott
@normanbott Жыл бұрын
Makes the old SurForm tools look a bit amateurish . Must get me one ! Thanks.
@startmaking1
@startmaking1 Жыл бұрын
Hi Norman. Whatever tools you have got have clearly done a good job for you up to now. I find that when the time is right to add or replace a tool it feels natural. Maybe this is the time to get a rasp. At least it is not too pricey too.
@robinalexander5772
@robinalexander5772 Жыл бұрын
Hi just found channel. My only complaint is using vinegar to clean up saw blade. Yes, it works every day of the week, it's an acid. Use WD40, Inox, CRC any light oil. Unless you neutralise the acid, you will get rust back. Why is this so? with an abrasive medium you leave micro scoring in the plate, this is where the vinegar sits. The Shinto file is good but don't throw out your files so fast. Many wood working projects use different woods, so the Shinto may work really well on some but not so good on other timbers. An arsenal of tools maybe the way to go. But in life we try this, try that, what works in UK, USA, Australia, will differ, types of wood and conditions. So far like your channel stay safe.
@startmaking1
@startmaking1 Жыл бұрын
Hi Robin. Thank you for your comment. And for your advice. I had to edit a fair amount for the video as it was so long. One part was where I washed the vinegar off and then applied a coat of 3 in 1 oil. The reason that I edited it out was because the letters didn't stick due to the oil and I had to in turn wipe most of that off. It was a real pain. But you are right, U have now left it open to rust annoyingly. I honestly had no idea about vinegar then abrasive, makes complete sense. And I take your point about the rasps and files. Again, to be honest, I changed the title as a last attempt to get people to notice the video. Create some intrigue if you like. The irony being that I used the needles files as much as the Shinto I guess. thank you for your comment again and for watching in the first place. Much appreciated,
@robinalexander5772
@robinalexander5772 Жыл бұрын
@@startmaking1 I do understand as a creator of content you need to make your videos stand out. All good. Keep up giving content it helps people, this might help or it might not but sometimes a longer video is better than short, you are then imparting more information to new people, which is going to help them more, but people will always say o..it's to long, so I say skip forward. No problem but the new guy or girl will really appreciate the time you give. Cheers from Tasmania
@startmaking1
@startmaking1 Жыл бұрын
Hi Robin. That is definitely a good point. For a more informative video, like a build or a 5 tools, 8 tools, one like that, I really like to take more time. You are right, people say it is too long but beginners like the info. I think I am finding a good time judgement but there are always tweeks, Thankyou
@emm_arr
@emm_arr Жыл бұрын
Yeah. It's the tool people don't know that they need. Better than most rasps and files and every single surform (bleugh) I've ever used.
@startmaking1
@startmaking1 Жыл бұрын
I have a few surforms and thought they were as good as I could get until I got this. Though, they did serve me well up to now. You never really know you need a tool until you know.
@emm_arr
@emm_arr Жыл бұрын
@@startmaking1 Good point! The algorithm never presented your vids to me until today, but I approve of what you're doing. Subscribed.
@startmaking1
@startmaking1 Жыл бұрын
Thank you MR. Great to have you aboard. Goodness only knows how the algorithm works., Mystery to me. By the way please dont worry if I do a mix of build, workshop and tool videos. there is always a tool one on the way if you like that in particular.
@emm_arr
@emm_arr Жыл бұрын
​@@startmaking1 Glad to be on board! It's weird. I hope to binge watch soon, but in the meantime, I'll mention Renaissance Wax and Boeshield T9. ANYONE who has tools that are made out of iron or steel should know about these. They are not cheap - but are cheaper than replacing tools! They do keep the rust at bay on metal planes and chisels, and Renaissance Wax has many uses - such as stopping brass tarnishing and on polished stone - but I mainly use it on woodworking planes. And if anyone does look into these, the other stuff the suppliers sell tends to be quite interesting too.
@startmaking1
@startmaking1 Жыл бұрын
Thank you. I really appreciate good advice on products I have never encountered.
@eddienew2044
@eddienew2044 Жыл бұрын
I have one of these and like it. It certainly compares favourably with machine made rasps but I haven’t compared it with hand-stitched tools (I’m not made of money). Other videos have noted that the tip can be hard on fingers and offered two solutions. The first was a rubber ferrule from a walking stick jammed on the end. The other was to grind small depressions on the front and back of the relatively flat bit at the end to grip with finger and thumb.
@startmaking1
@startmaking1 Жыл бұрын
Hi Eddie. Great advice. I didn't feel it as uncomfortable but I have very rough hands so maybe they dont tear up as easily. But I will definitely take a look and that would make a great short video to follow up as an improver. Thank you
@zapa1pnt
@zapa1pnt Жыл бұрын
@@startmaking1: Gloves would be helpful and you would not lose any length of stroke. 😁✌🖖
@startmaking1
@startmaking1 Жыл бұрын
I used to wear gloves but people dont like seeing it. They tell me not to wear them. I get it for machines but using a rasp they would be great.
@eddienew2044
@eddienew2044 Жыл бұрын
@@startmaking1 I am glad I don’t have a KZbin channel because if someone told me not to use gloves when I thought they were appropriate that person would get a rather rude reply.
@zapa1pnt
@zapa1pnt Жыл бұрын
@@eddienew2044: Indeed! There are Many YT commenters, who both ask for and deserve Very rude replies. (and I give them when I think I won't offend others) 😁✌🖖
@jonesey1981
@jonesey1981 10 ай бұрын
Do you have a coping saw? Seems like that would have made your whole letter process quite a bit quicker, or maybe I'm missing something.
@startmaking1
@startmaking1 10 ай бұрын
Sadly not. That would certainly have helped. Though I have to say, the rasp did such a good job on the outsides I didnt miss a saw. Though on the inside it would have helped.
@jonesey1981
@jonesey1981 10 ай бұрын
@@startmaking1 yea I’m totally getting a Shinto. You may mention to your following they’re like $19 at taytools and $40 at woodcraft for the same thing so purchase carefully.
@startmaking1
@startmaking1 10 ай бұрын
Bargain. You wont be sorry.
@JasonGrissom
@JasonGrissom Жыл бұрын
Great video Mark! I'm not sure I'm going to be taking a rasp to my wood at home just yet though. 😂
@startmaking1
@startmaking1 Жыл бұрын
Hiya Jason. Thank you as always . That should bring a tear to your eye I expect. lol
@thoughtstream9591
@thoughtstream9591 Жыл бұрын
You made a comment about not having a bandsaw. I have two suggestions. One is to mount your jigsaw upside down kind of like a router table. The other is to buy a jewelers saw. The first is almost free, the second is cheap (20$). Both will serve you forever even if you get a bandsaw.
@startmaking1
@startmaking1 11 ай бұрын
Thats a great idea. Thank you. In fact both are,.
@StevDoesBigJumps
@StevDoesBigJumps 10 ай бұрын
Roughly, how much more effective is it than a horseshoe rasp?
@startmaking1
@startmaking1 10 ай бұрын
That is an interesting question. I have to say that it would be job dependent of course. But I do believe that if nothing else this leaves a better finish easier. As for wood removal, that is an interesting thought for a quick experiment. Thank you
@StevDoesBigJumps
@StevDoesBigJumps 10 ай бұрын
@@startmaking1 I've been considering getting a saw rasp for making guitar necks, as a normal rasp is difficult to get an even thickness with along the neck. I've seen other people using saw rasps, some seem to even seem to be able to use them almost sideways, like a spokeshave, though without the bouncing and rattling on the hard wood.
@startmaking1
@startmaking1 10 ай бұрын
There are quite a few people who have commented that this is exactly what they use the shinto for. And some of them are very experienced.
@StevDoesBigJumps
@StevDoesBigJumps 10 ай бұрын
@@startmaking1 ah cool, thank you
@AdamFahn
@AdamFahn Жыл бұрын
I'm more of a power tool kind of guy but you've got me thinking. Great video.
@startmaking1
@startmaking1 Жыл бұрын
Hi Adam. The thumbnail is a bit misleading in that regard I guess. It probably can be beaten by a power planer lol. Thankyou
@zapa1pnt
@zapa1pnt Жыл бұрын
@@startmaking1: For the demonstration you showed, a power planer would be butchery. 😁✌🖖
@startmaking1
@startmaking1 Жыл бұрын
And scary
@paulnipper4071
@paulnipper4071 Жыл бұрын
Can you find the Shinto in the States?
@startmaking1
@startmaking1 Жыл бұрын
Hi Paul. There should be a link to one on Amazon for the US. Let me know if it doesnt work please.
@TootEmCarMan
@TootEmCarMan Жыл бұрын
I used a Shinto rasp at Crimson Guitars and it roughed out the neck of the guitar I built there very quickly. If you can justify the price of the Iwisaki flat and half round files you will not be disappointed. After having roughed out my neck with the Shinto rasp my instructor (Sean) had something he had to take care of so he said for me to sit at my desk and tidy the neck up with the Iwisaki files. He came back half an hour later, looked at my neck and said "I said use the files only, there's no point sanding it just yet". I told him that I had only used the files and not sanded and that there was no sand paper on my bench. He looked the neck up and down then said "very well done" to me. I just had to buy a pair of those files and I use them for just about everything. Incidentally, my guitar neck only took about 10 minutes of sanding at a later time. If you would like to see my guitar then check out WOTB202 and WOTB203 here on KZbin. I am Rik in them.
@startmaking1
@startmaking1 Жыл бұрын
Hi Rik. I need to find the videos. Very interested in watching. Do I just search for WOTB202. I didn't find anything from an initial hunt on KZbin. Love the story about the guitar. Well done,.
@TootEmCarMan
@TootEmCarMan Жыл бұрын
@@startmaking1 Hmm, looks like the vids are no longer available?!?
@startmaking1
@startmaking1 Жыл бұрын
Oh that is a shame. I was looking forward to watching .
@jimrosson6702
@jimrosson6702 Жыл бұрын
Great video great ideas
@startmaking1
@startmaking1 Жыл бұрын
Thank you Jim. Much appreciated.
@brucewelty7684
@brucewelty7684 Жыл бұрын
It appears the handle on yours is noticeably larger than mine. Yeah, the S was needed. It would be confusing on which kind of TART you were referring to.
@zapa1pnt
@zapa1pnt Жыл бұрын
Either one works, for me. 🙄🙄🤣 😁✌🖖
@startmaking1
@startmaking1 Жыл бұрын
haha, brilliant.
@startmaking1
@startmaking1 Жыл бұрын
Making me hungry for jam tarts now.
@knolltop314
@knolltop314 5 ай бұрын
Better than farrier's rasp?
@startmaking1
@startmaking1 5 ай бұрын
From the general consensus, about the same, depending on the job. good question that is worth investigating for sure. Good excuse to buy another tool too.
@teacheme
@teacheme Жыл бұрын
Yet another tool to add to my collection (somewhere.)
@startmaking1
@startmaking1 Жыл бұрын
Fortunately it is not a dewalt. Should save you a bit of cash hopefully.
@teacheme
@teacheme Жыл бұрын
@@startmaking1 I looked but they don't make one🤗
@startmaking1
@startmaking1 Жыл бұрын
shame.
@michaelwillson6847
@michaelwillson6847 Жыл бұрын
M8 once again 👏👏👏👏 think this was a great follow up video. Ive seen that rasp in so many channels and have looked at it so many times and thought that cant work cant be right. But seeing it do that a fear it may be sommit am gonna have to part my tightness with and purchase. Could be very helpful in my future projects. I bought the German supermarket branded ones few weeks agao and they've done not bad tbh but that seems great. Seriously though with what happened think this was awesome video to stick out today. Speak soon. 🏴󠁧󠁢󠁳󠁣󠁴󠁿👍 Ps am still waiting for my Camino shout out. 😂😂
@startmaking1
@startmaking1 Жыл бұрын
Hey. Thank you. I wondered if this would take off loose bark but figured you are better with a grinding wheel. Might do a good job tidying up live edges though. You definitely deserve a shout out. More than deserve it. Hang fire though I have an idea.
@michaelwillson6847
@michaelwillson6847 Жыл бұрын
@@startmaking1 yea deffo better a reckon with the wheel although would clean up the stray stuff nicely a reckon. M8 a was just kidding am just a guy with few ideas your the one putting the graft in. 🏴󠁧󠁢󠁳󠁣󠁴󠁿👍
@startmaking1
@startmaking1 Жыл бұрын
@@michaelwillson6847 lol. Don't do yourself down. You have ideas, support, positivity, I could go on. We are part of a really great start making community and I am very lucky.
@michaelwillson6847
@michaelwillson6847 Жыл бұрын
@@startmaking1 ok I'll accept that if u accept that your allot better at this than u give yourself credit for. 😂🏴󠁧󠁢󠁳󠁣󠁴󠁿👍
@startmaking1
@startmaking1 Жыл бұрын
reluctantly I accept.
@brianstevens3858
@brianstevens3858 Жыл бұрын
I gave several open mesh rasps they all do better than a solid body, but the woodchuck has one advantage with the wide woodchisel edge it can shave those raised fibres on edges. No need for two tools on problematic woods.
@startmaking1
@startmaking1 Жыл бұрын
Oh wow. I had never heard of that before. 2 for one tool . Better get myself one to test. Thank you Brian.
@brianstevens3858
@brianstevens3858 Жыл бұрын
@@startmaking1 This one is same company as the home depot one's but better quality industrial version "Nicholson File # WCSET3CMNN Wood Chuck Combination Chisel and Wood Rasp"
@startmaking1
@startmaking1 Жыл бұрын
Brilliant Brian, thank you
@christopherleblanc9599
@christopherleblanc9599 Жыл бұрын
im sure 100 people have said this , but , magnets in the letters
@startmaking1
@startmaking1 Жыл бұрын
You are actually the first and now I am kicking myself for not thinking of it myself. A fully adjustable sign. Damn. Thank you
@christopherleblanc9599
@christopherleblanc9599 Жыл бұрын
@@startmaking1 cool
@christopherleblanc9599
@christopherleblanc9599 Жыл бұрын
you made me think of those fisher price alphabet🤓 fridge magnets came in coloured plastic
@startmaking1
@startmaking1 Жыл бұрын
Oh yes. I still have one cluttering my fridge door. Should have taken inspiration,
@billffromnh
@billffromnh Жыл бұрын
I've carved a couple signs & have given them away. But I've had a Shinto rasp for 30 years. It doesn't get use daily but it easily removes wood when needed. I forget why I originally purchased it. but other than a small Stanley Surform tool, it's the only rasp I have. It came in real handy when fitting the railing on a small deck I built a few years ago. I always thought I wanted a couple more conventual rasps or some rifflers but both are expensive for good ones.
@startmaking1
@startmaking1 Жыл бұрын
Hi bill. I suspect that it will be the tool that I dont always reach for but if I didn't have it I know it is going to be a long slog with one of my other files. That is also the added bonus, this is really cheap for what it does.
@matthewryan8463
@matthewryan8463 Жыл бұрын
Love it, Mark! Although I want to request, if one of those letters ever falls off on camera, please leave it in or add it to the end as a "blooper" ;p On a more serious note, what's your opinion on using a Dremel or other rotary tool for say, some of that fine detail removal work?
@startmaking1
@startmaking1 Жыл бұрын
Hi Matthew. That's a deal. Now I want it to happen. A rotary tool once I have electricity down there would be such a time saver. one day.
@AusWorkshop
@AusWorkshop Жыл бұрын
Not only does the channel name need that S, you also need to make sure the t wasn't flipped over vertically upside down or that would be yet another channel altogether 😅
@startmaking1
@startmaking1 Жыл бұрын
Oh yeah, you are right lol.
@bloggalot4718
@bloggalot4718 Жыл бұрын
I have Surform rasps which I occasionally use and they do the job for the small amount of time I need them.
@startmaking1
@startmaking1 Жыл бұрын
Hi. I always say that if you dont need a tool then you have saved money. I find that jobs come up where I can't not buy something and that is generally how I build my tools collection.
@NitoTerrania
@NitoTerrania Жыл бұрын
Shinto Rasp, Ryoba Saw, Makita Tools... Well, you're slowly getting shifted to japanese tools, aren't you :) Btw, does the 2 hours Lighting Battery still an issue ? If it is... maybe considering making a smart lighting setup using smart led strip ? Make it foldable ang hangable in the frech cleat section ? Led Strip and White Acrylic sheet are pretty cheap, if I remember correctly
@startmaking1
@startmaking1 Жыл бұрын
Hi NIto. Well noticed. I actually had that exact thought when I was popping the links into the description and actually took the Makita Jigsaw out. In truth Makita have not been great this week. I love the tools but the treatment I got was underwhelming. Sad as I wasn't asking for anything for free, just some useful info on a tool I was looking at. Anyway, yes the lights are an issue but I hope to have a big fix in place by mid August. fingers crossed. If it falls through though I will take a look at the Led replacement as the videos are suffering .
@NitoTerrania
@NitoTerrania Жыл бұрын
@@startmaking1 Yeah, Makita don't even have service center in my city. But so far I only had 1 makita broke on me (trimmer). The rest has been serving me well.for at least 5 years with almost consistent weekly use. I'm glad to hear the Lighting solution will be done as soon as August. Hopefully it will spur you to make more content per month
@zapa1pnt
@zapa1pnt Жыл бұрын
@@startmaking1: I have, over the years, found Japanese appliance/tool instructions to be very lacking. It seems to be assumed you are already an engineer/expert, in whatever field is applicable and then, of course, there is the language/translation barrier. 30 years ago, I bought a Sony amplifier. It has a control labeled "Soundfield" but Nothing in the instructions, to explain what it is or how it affects the output. I still have no idea what that means and no longer care. 🙄😣 A few years ago, I purchased a Zojirushi bread making machine (Excellent choice, Top shelf). I emailed customer support , to ask if ambient room temperature affects the operation of the machine. The reply was a direct quote, from the instruction booklet, which told me Nothing. I tried again at two, well separated, later dates and got the same BS reply. ☹😖 So, if an English speaking person buys anything Japanese, which requires instructions, you are on your own. 😁✌🖖
@startmaking1
@startmaking1 Жыл бұрын
I hope so. There is a big change coming and I am excited. Don't want to sound cryptic but it is still only 90% decided. Will let everyone know soon.
@startmaking1
@startmaking1 Жыл бұрын
Wow frustrating. I just emailed Makita and said something along the lines of please can you direct me to the right person to ask a question about a tool that I am thinking about getting. The reply said, sorry we are not looking to deal with and content creators through sponsorships. I hadn't even told them what I do. I replied saying just that and that I wanted nothing from them just some info and got the same reply. Really strange. I then started to get a little miffed and said that I use only Makita and maybe they should check a video or two to see how well I speak of them. They replied saying yes they had already checked it and were not looking to work with a creator. I never actually got to ask them about the reciprocating saw that I was thinking about buying. Shame.
@gordonwalmsley453
@gordonwalmsley453 Жыл бұрын
get yourself a cheap scroll saw for letters, save huge amount of time.
@startmaking1
@startmaking1 Жыл бұрын
I would love to. I would love a band saw but all in good time I guess.
@gordonwalmsley453
@gordonwalmsley453 Жыл бұрын
Scroll saw cheaper but do less with them. Bandsaw better for woodworking
@bigoldgrizzly
@bigoldgrizzly 6 ай бұрын
If you can't afford one of these, buy a farriers hoof rasp of decent quality and it eats wood voraciously
@startmaking1
@startmaking1 5 ай бұрын
I'll check them out. thank you.,
@bigoldgrizzly
@bigoldgrizzly 5 ай бұрын
@@startmaking1 Best I have found is made by Heller and called the 'Excel Legend'
@bigoldgrizzly
@bigoldgrizzly 5 ай бұрын
Try a Heller 'Excel Legend' - best I've come across
@nicholasgeorge7825
@nicholasgeorge7825 Жыл бұрын
Japanese saw rasp. Yeah.
@startmaking1
@startmaking1 Жыл бұрын
Thank you
@sjaakmcd1804
@sjaakmcd1804 Ай бұрын
I have 3 different ones (and japanese pull saws). They are ok for wood bashing up to oak, ash, beech(?). Would I use a shinto rasp on a £1000 walnut rifle stock blank? NOOOOOOOOOOOOOOOOOOOO!!!!! They are way too brutal and fast!
@startmaking1
@startmaking1 Ай бұрын
That's a really good insight. Thank you.
@patrickarchuleta9594
@patrickarchuleta9594 Жыл бұрын
Throw away old ones you will buy me the new ones thanks.
@startmaking1
@startmaking1 Жыл бұрын
Lol. If I could, I would. Thank you
@zeljkodzunja
@zeljkodzunja Жыл бұрын
Hello ... I would disagree with you, this is a drywall file as far as I know ... There are many files of various sizes and shapes for wood as well as metal ... wood files do much much better edging than yours plaster file !
@startmaking1
@startmaking1 Жыл бұрын
Hi Zeliko. Thank you for your interesting comment. I am not sure that you are right but, then I am not claiming to be an expert. I was under the impression that the Shinto Rasp File's primary purpose is wood but can also be used for Plaster as a secondary use. Also from the experience I have had, and again I am no expert and have not used all of the files out there, but I have nothing that can remove wood as fast or as cleanly as this. Which files are you considering to be better. I am genuinely interested in learning.
@JohnTravena
@JohnTravena 10 ай бұрын
I’ve used this for removing wood and it’s the ideal tool for tasks such as carving guitar necks.
@RedPillAware
@RedPillAware Жыл бұрын
scam.
@startmaking1
@startmaking1 Жыл бұрын
hmmm. Ok.
Have you just nailed SQUARE cuts ? CHEAP too !!
13:57
Start Making (Woodworking)
Рет қаралды 45 М.
5 Woodworking tools to avoid // Watch before buying.
23:11
Start Making (Woodworking)
Рет қаралды 298 М.
1% vs 100% #beatbox #tiktok
01:10
BeatboxJCOP
Рет қаралды 67 МЛН
Мен атып көрмегенмін ! | Qalam | 5 серия
25:41
Shinto Rasp Review | Paul Sellers
7:16
Paul Sellers
Рет қаралды 148 М.
What is the Difference Between Files, Floats, Rasps and More
19:14
Wood By Wright How To
Рет қаралды 42 М.
Scrap Wood to Snowman Christmas Decoration
9:38
Pelado Creations
Рет қаралды 3,7 М.
Tools I REGRET not getting sooner.
20:11
Start Making (Woodworking)
Рет қаралды 42 М.
Time to cut through the years of lies.
18:16
Start Making (Woodworking)
Рет қаралды 99 М.
Throw away your woodworking clamps and make this instead | DIY clamping panel
5:06
11 Better TOOLS For Beginner Woodworkers || Spend Your Money Wisely.
15:50
Start Making (Woodworking)
Рет қаралды 31 М.
Improving a Shinto Rasp: The Most Efficient Shaping Tool in the World!
2:59
7 COOL Tips You Will Actually Use || Woodworking Tricks
21:44
Start Making (Woodworking)
Рет қаралды 118 М.
The Genius Miter Trick You Were Never Taught
3:55
Inspire Woodcraft
Рет қаралды 1,8 МЛН