NOVRITSCH SSG10 upgrades (HOW TO) - LEFT HANDED BOLT, FPS INCREASE & AIR BREAK MODIFICATION

[@rhysmallie1548]

Hi foxgreen I just want to say my dad told me that you played simtac with him and my brother keep up the good work

[@FOXGREEN]

Ya I play there a lot.Thanks man I will do 😎👍

[@FOXGREEN]

If you have any questions feel free to ask me 👍

[@anthonyedgar1508]

Hey man, I’m looking at getting into airsoft and am hooked on sniping. Would you recommend the ssg24 as I know it’s really accurate or the newer ssg10 a2, I’m not much of a fan of a1 looks? Is it that much better? Thanks

[@FOXGREEN]

@@anthonyedgar1508 the A1 and A2 both perform the same your just paying more for the cool look of the A2 so if you prefer that go for it. Inhave the ssg24 and the ssg10 A2 now and love both guns a lot!

[@anthonyedgar1508]

Would you say the a2, I do much prefer the looks and vertical grip of the a2, is worth the extra £50 from the ssg24 as I have a friend with the m40 stock he said he’d give me for the ssg24

[@FOXGREEN]

@Anthony Edgar ssg10 is a better gun as far as i can tell and with the 25 year parts warranty its blows the ssg24 out of the water

[@anthonyedgar1508]

@FOX GREEN Thanks a million, that’s been helpful

[@lonnieday5777]

Love the video, I just purchased my first sniper and it happened to be the SSG10. I am curious though where does one find the air brakes you used in this video to quiet the rifle? Very cool to see someone quickly and easily explain their work and why they do it. Love your videos!!!

[@FOXGREEN]

Thanks man the airbreaks and fps adjusters can all be bough on Novritschs store like the gun under accessories 🙂👍

[@toothlessdevildog80]

Good video as always . I really appreciate shedding light on the eyesight issue .I also have sight/focus problems (the reason why I can not use iron sights & use a 56mm objective lens optics on my guns ) . Can not wait until I get to see , and record some new gameplay !

[@FOXGREEN]

No problem man decided to tell my viewers why I shoot left handed

[@daisect2676]

My SSG10 is coming next week! I am just like you, I want every % of performance possible for the weapon I play with. Will do the fps increase in combo with air break for my countrys rules, I really liked the sound improvement! Also trying "SILOs Over-Barrel Crazy Jet Suppressor", I think it will be mostly for the looks but I will try to chrono with and without it. Thanks for the video was very well made!

[@FOXGREEN]

Thanks man glad you enjoyed. 😁👍

[@FOXGREEN]

@Eric Agius yes in Ireland this is the A2 version as you can see in the video. Thanks man 🙂👍

[@daisect2676]

@Eric Agius I got the A1 because I like that stock! Enjoy your rifle! Oh, the supressor i bought did not improve anything but it looks good with a supressor!

[@TheXOMBIE13]

Thank you for making this. I just ordered mine last night, with the left hand conversion

[@FOXGREEN]

No problem man just FYI you need to shoot about 500 bbs through it before the hop up breaks in fully 🙂👍👍

[@TheXOMBIE13]

@@FOXGREEN I will gladly do that

[@FOXGREEN]

@@TheXOMBIE13 just don't be worried of you thong its not working correctly until you do that the hop up will only need to be half way on then you will find after that to get good amount of hop

[@milofromscorpio899]

Got mine two weeks ago as well. :) I don't have my/your DMR yet xD (the spot on the wall is already there though :D), but as a huge fan of Novritsch (I was one of his firsts patreons several years ago, got the chance to talk to him twice on skype at the "Hangouts with patreons" times) I bought his new sniper instead ^^ (it's on my wall, but still with my wife's new teddy bearS -_-') Your video is really interesting. I was always wondering how to reduce the sound and the vibration that the spring/piston make when they release the air. Looked on so many forums... Nobody was talking about that despite my myriad of posts but now, 10 years later, I'm here : An air breaking. I couldn't say it was worth waiting 10 years to get the answer, but still... I finally got thanks to you xD Nice video, good quality, well detailed for the beginners (even for me, I learnt something x) )... Keep it up ! Milo

[@FOXGREEN]

Thanks man glad you got value from this video that means a lot 🙂👍

[@joellogy2384]

Love the quality, keep it up!

[@FOXGREEN]

Thanks man 👍👍

[@fanddbricks8645]

Great vid I’m a lefty too

[@Ben-xm6vz]

Loved the vid it was great. Do you think this would work the same for a vsr10

[@FOXGREEN]

Its the same idea just screws are in a different location yip 🙂

[@fanddbricks8645]

Love the leaves on the table

[@maggotfor666]

Would you advise changing the bucking? If so what to ?

[@FOXGREEN]

Yes the stock isn't good for cold weather I put in an modify x range 55 degree it's hard to fit it but way way better

[@gerardkearns4376]

Great video as always bud!🇮🇪

[@FOXGREEN]

Thanks lad! :)

[@GaryK..]

Nice video just got my ssg10 cant wait until I can get out and use it

[@FOXGREEN]

Thanks man ya I al the same

[@alancox8412]

hi foxgreen do you sell the patch you wear it looks very cool mate keep up the good work

[@FOXGREEN]

Ya message me on Instagram 🙂

[@jamespearce690]

I’m also a lefty, is Novritsch snipers the best? Looking for recommended snipers with the option of a left handed bolt. Great video too 👍

[@FOXGREEN]

Yes it's a great gun especially fir Leverton handed ots reliable and cheap so it's a win win 🙂 Another good option is the tac 4q by silver back just released but cost a bit more but can be changed to left or right handed out if the box with not extra parts 👍

[@pab18c5]

Very nice video! This will probably be my next sniper rifle and i'll need to get the conversion kit too. I'm a lefty when using primary weapons but when it comes to using a pistol i shoot with my right hand. Weird i know lol Keep the videos coming!

[@FOXGREEN]

Thanks man i hope this will help you out so 🙂👍

[@vamp01968]

Hello, how did you manage to make the rifle quiet, very quiet, how did you do it?

[@FOXGREEN]

I just added the airbreak really but I also put loads of silicon grease on the spring and spring guide which helps get rid of of the vibration noise when shooting while also keeping the piston well lubed for consistency.

[@vamp01968]

@@FOXGREEN ok, y try silicon grease on the spring and spring guide

[@FOXGREEN]

Yes I did that also

[@EVOAIRSOFTSNIPER]

hey nice vid Fox! Id like to know how many meteres can u reach with airbrake + rings and 0.32 gr bb's - underjoule?

[@FOXGREEN]

I can reach about 65 meters straight after that I have to aim over the target I have since added a modify 55 degree bucking that increased the range by 10 meters or more

[@EVOAIRSOFTSNIPER]

@@FOXGREEN well, AIM over the target its not so nice for me, but i Will try to add a 55 modify. Not sure about the airbrake, i have already mod the cylinder head for Better quiter solution without loose FPS.. but id like try with airbrake on new cilynder head for the test and ad some rings. Thx.

[@EVOAIRSOFTSNIPER]

@@FOXGREEN Sri, Is your spring M90 or 110?.. i mean from Novritsch web site..

[@ShatterSoft]

What microphone are you using it is great quality. What mic would you recommend for somone starting out and on a tight budget for recording videos like this?

[@FOXGREEN]

Its called an instamic its tiny and very portable it is quite expensive. You can get cheap phone microphones on amazon that plug in and use an app go for one like that they have great quality 🙂

[@NepaAirsoft]

Did you leave it where it was (Joule wise) or did you add another shim or different Air brake?

[@FOXGREEN]

Its all in the video I chrono it and its very low like 0.777 joules and we are able have 1 Joule here so I open it up shim it up loads because I added an airbreak also which reduces the fps further and I chrono it again at the end and the fps is 0.97 joules so its upgraded and shooting at my legal limit now

[@NepaAirsoft]

@@FOXGREEN - just thought you mentioned after the .97 chrono you might add another shim. No worries.

[@FOXGREEN]

@@NepaAirsoft I think if I did it would push it too high you see so didn't in the end bit if you needed to add more you could if you didn't get it right the first time its verybquick and easy to do so 👍

[@HughJC]

Excellent video, great set up for videos.

[@FOXGREEN]

Thanks Hugh 🙂👍

[@natjaclarke4210]

Hi fox green my ssg10 was shooting at 0.8 joules for the past few days and now it at 0.5 any idea what’s wrong with it

[@FOXGREEN]

I think the problem you have is you need to put some silicon grease on the piston cup and in the cylinder if its too dry it causes too much friction

[@natjaclarke4210]

Is it normal for a 0.8 joule ssg 10 to under hop .32 bls bbs

[@FOXGREEN]

You need to shoot over 700 bb before the hop up breaks in it should then hop 0.32g bbs fine. However, I actually changed the stock hop up nub to a 50 degree maple leaf autobot bucking as I found the 60 degree one it comes with had difficulty hopping in colder weather during the winter. So changing it if it doesnt work after 700 shots will make it way better

[@Unbranded_band]

For the fps adjuster rings, how many do you recomend to put on without an air break

[@FOXGREEN]

There is no real set number as springs differe I have a chrono and just add or minus them as needed until I get the desired joules. If you don't have a chrono get one its the most important peice of kit you will own for airsoft

[@natjaclarke4210]

Sorry for asking another question I have put two packets of FPS adjusters in my ssg 10 and it’s still around 0.80 joule without an air break is it okay to put two more packets of FPS adjusters on my ssg10 or will it be to much pressure on the spring

[@FOXGREEN]

Nonots definitely not too much pressure for the sprong you can add more adjusters but you coukd also buy and M100 or m110 spring also. Wjat weoght bbs are you chrinoing your gun with? Did you make sure youbset your chrono to the weoght bbs you are using when testing?

[@natjaclarke4210]

Ye I have my chrono set for 0.32 thanks man

[@xukelho]

Im planning on getting an SSG10 soon. I also intend on addind the biggest airbreak on it. What Joule configuration do you recomend me to get, knowing that my country's limit is 1.3J? And also what BB wheight to you recomend to run in that configuration?

[@FOXGREEN]

I wouod use 0.36 gram bbs anyway maybe buy an M110 spring and some fps adjuster rings also as the airbreak will reduce the fps a little so you will need them to increase the power again.

[@xukelho]

@@FOXGREEN Should I start with the 2.2j option?

[@FOXGREEN]

No get the one joule one and order an m110 spring also

[@Technus5XD]

It looks like there is a lefty conversion for the ssp18 is that true?

[@FOXGREEN]

The SSP18 is a hand gun there rifles SSG24, SSG10 have a conversion kit to left and the SSG96 can be swapped with not extra parts to left handed also

[@Technus5XD]

@@FOXGREEN Thanks for responding but I know about the ssg24-10-96 I was actually curious about the handgun

[@FOXGREEN]

I think think the hand gun needs a left hand conversion kit though ?

[@logantucker2177]

I’m going to be getting a ssg10 a2 and it has the m180 spring in it. It’s also coming with the air brake pins and suppressor. My field limit is 2.8 joules in the United States. Will the combination of pins and suppressor lower the joules down or would it be a good idea to get a different spring?

[@FOXGREEN]

Try the longest airbreak it may take it down enough. If not take out the spring and just cut one Coil off and try again keep doing that untill you het the power you want. But try with just the airbreaks first anyway.

[@logantucker2177]

@@FOXGREEN thanks for the info. Really enjoy your videos especially the milsim one with you making all those long range shots. Really has me looking forward to seeing how my new rifle will perform.

[@FOXGREEN]

Thanks man and best of luck with the new rifle 👍👍

[@williamhissom3921]

Any links for the shims or you make them?

[@FOXGREEN]

Here they are eu.novritsch.com/product/ssg-fps-adjuster-rings/

[@vasilissarakiotis8694]

Hey Fox green ..nice video around the gun .Just a quick question ..i m searching for methods to make my SSG10 quieter ...does the air brake pins offer a noticeable difference combined with the suppressor .Also have you tried sorbo pads , a lot of guys recommend them

[@FOXGREEN]

The airbreak makes a huge difference I haven't tried the pads though air break and suppression is worth it but your fps will drop so buy fps adjuster rings to counteract that

[@vasilissarakiotis8694]

@@FOXGREEN thanks !

[@vasilissarakiotis8694]

@@FOXGREEN so yea ! the M150 was giving me 2J the problem was that i have changed the hop up to a MR-Hop 60deg and when i was measuring the gun i had 0 hop up and the bbs was rolling out of the gun that's why i was getting low fps .Now with the M110 +fps adjuster i m getting 1.001-2 J which is perfect for my field !

[@FOXGREEN]

Ah good to know man always an easy fix in the end I find. Glad you got sorted 👍

[@vasilissarakiotis8694]

@@FOXGREEN yea...next i m gonna try the airbrakes with an M120..but he Crazy Jet barrel +Mr hop gives awesome results ...couldn't believe the improvement

[@natjaclarke4210]

Just got mine today I put all of the FPS boosters and it only at 0.8 of 1 joule can I add more FPS adjusters to increase it or will it not work

[@FOXGREEN]

Ya you can add more thats no problem I have 1 and a half sets in mine it doesn't matter just tune it up to where you need it with them 🙂👍

[@natjaclarke4210]

Thanks man

[@CROWAIRSOFTNI]

fantastic disassembly... really good to see your able to airsoft so effectively with a visual condition... question whats your average fps of your rifle at present i try to get mine right on the limit 😂

[@FOXGREEN]

Well over here it's all 1 joule even for snipers so for the 0.32g bb's I use that puts me sitting at about 263 fps which is like 0.96 joules so super close to my limit too 🙂

[@minihasahead]

Would a few washers work as shims

[@FOXGREEN]

Yes if you can find ones that are wide enough to go over the sproing guide on their internal diameter and narrow enough external doameter to fit in the cylinder externally 👍

[@pat.7921]

I was wondering but do you need the airbrake pins to increase fps/joule?

[@FOXGREEN]

If you want it to be quiter you can buy the airbreak pins but you don't need them. The gun just comes without them so its an extra if you want them is all.

[@pat.7921]

FOX GREEN 👍🏻 thanks lad

[@Jordaans35]

Hi fox Quick question is it possible for you to order a left handed sniper? Or is is manufactered only for right handed players of so do you think novritch should make it also for left handed players :)

[@FOXGREEN]

Yes but only the SRS can be ordered keft handed no other gun as far as I know 🙂

[@Jordaans35]

So sadly you are always into more cost doesnt that bother you and would you like to see novritsch make these sniper also for the left handed so you guys are ready to play out of.the.box instead of putting more and more money into the gun :)

[@FOXGREEN]

@Jordy Mulder well it doesn't really bother me that much its easy to change it does cost a little more to but the left handed kit. But yes it would be very convenient if it came out of the box left handed but I guess there is not enough demand for him to do this. 🙂

[@foxtrotregaming8733]

I was watching videos about the inside of the cylinder having some sharp metal along where the searset goes and it eats away at your piston guide. Might be something to look into to insure your gun stays strong 💪🏽

[@FOXGREEN]

Thanks next time I'll open ill give it a look 👍

[@GaryK..]

I had to sand my cylinder wasnt cut properly was really rough and scraping mines is batch 2 aswell qc still seems shit lol

[@sin8ify]

damn thats quiet. Did you do any mods to silence your springy noise? ive done it all bar the airbreak Now i wish i picked a bag up. :(

[@FOXGREEN]

I just use loads of silicone grease around the sprong and spring guide that makes it totally quite and keeps it continually lubed

[@sin8ify]

@@FOXGREEN i took the foam from my way to small ssx23 box. Stuffed a tiny bit next to the spring. Man I should have gotten the airbreak. 😭

[@vamp01968]

how did you make the sound when you shoot so quiet?

[@FOXGREEN]

The airbreak thatbI 9nstall in this video does it.

[@vamp01968]

@@FOXGREEN Hi thanks for replying, I have my ssg10 a1 with rapax 3+ I have done exactly the same as you, I made the change to left handed, I installed the airbreak, but the smaller one and also in the cylinder head I installed a homemade sip, before installing the airbreak and the sip, I had as average in fps 547 measured with .20 and now with the same .20 I have 435 fps, I have lost too many fps and I do not leave it as quiet as the one in the video and now with the same .20 I have 435 fps, I have lost too many fps and I do not leave it as quiet as the one in the video I will try with the airbreak measure that you mention to see what happens

[@FOXGREEN]

Remener its 1 joule in Ireland so the sound will be quite than 2.3 joules ans the spring isn't under as much pressure

[@2030Spywer]

What range do you get with 1 Joule?

[@FOXGREEN]

Make about 70m 80 woukd be possible with a lobbed shot these are all using 0.32 g bbs typically

[@2030Spywer]

@@FOXGREEN Thanks! the legal limit in my country is 1.3J, so now i have a baseline to compare! Great videos!

[@2030Spywer]

@@FOXGREEN I´m thinking about buying an SSG10, did you do any barrel upgrades or you run yours as ti came from Novritsch?

[@Ben-xm6vz]

Does this all apply to a vsr 10 and do you have any tips to drilling out the anti tampering pin on the vsr bolt thanks

[@FOXGREEN]

Its the same principal bit the spring and shims are different diameters the vsr has a smaller diameter spring you see. I just used a small metal bit on a hand drill to drill out the pin on my vsr when I had one you only have to drill about 2.5 mm deep and then it should screw right off. Just use a drill bit thats the same diameter as the pin or a little bigger its its smaller it won't work 👍

[@Ben-xm6vz]

FOX GREEN where could I get the shims do you know

[@FOXGREEN]

@@Ben-xm6vz for a vsr I don't know but you could get a bigger spring and cut it down until you get the desired FPS also 👍

[@dannystalford5029]

Only 1 joule in Ireland. Damn dude that must be pretty annoying. Got my vsr at 2.2 and it still doesn't go as far as I want it too

[@FOXGREEN]

You would be suprised what range you can get out of 1 joule 70m is achievable. Your tactics have to be more aggressive to dominate the feild though

[@johnzaknich3979]

'Ha' sheer luxury, try living in Australia where we have to use gel ball blasters (plastic toy guns) and even they are illegal in most states.

[@dannystalford5029]

@@johnzaknich3979 lolol. That is just ridiculous man. The fuck is up with the rules in oz. How did you end up on an airsoft gun video??

[@FOXGREEN]

@@johnzaknich3979 ya man I heard about that I feel sorry for you those things are not accurate at all

[@johnzaknich3979]

@@dannystalford5029 I travel to play or I did before covid - 19.

[@ShatterSoft]

Hey, I was thinking of upgrading my vsr10 G spec, firstly I want to put in a Maple Leaf CNC Aluminum Hop Up Arm and secondly a Laylax PSS10 100 Spring. Will the spring still allow me to stay under the joule limit here in Ireland and will the hop up arm allow to lift heavier bbs compared to my stock hop up arm. I really hope you can help Thanks👍

[@FOXGREEN]

The spring should be good if it is over it just cut a coil or half a coil off it and tune it down to the desired power so in theory any spring will work once its made for a vsr. The hoo ark I don't know man you shoukd get a maple leaf hop up bucking also though.

[@ShatterSoft]

@@FOXGREEN I already have the bucking installed I thought this would get more more lift but all it did was make the gun more quiet :)

[@vasilissarakiotis8694]

Hello...nice setup you got there ! I ve got a question ..I just installed the small inner+outer barrel kit and when i try to bring it back to its previous fps /joule i have installed an M150 and FPS adjuster rings but with all of them (12mm)the guns cocks once and on the second -third try it doesn't cock .When i install only 2 of them (8mm) the guns works perfect ...have you faced any issue? Also thinking of installing Airbrakes which will reduce the power even more. The field i m playing has a limit of 350fps (~1J )the same as yours .Can you specify your setup (because i cannot find the issue ! ) and the thing is that if i go to a different field i have to put on an M180-190 spring which again will have power issues for me . Thanks !

[@FOXGREEN]

The m150 is way too big a spring for 1 joule that will give you closer to 2.3 joules install am m100 and an airbreak and then add fps adjuster rings as needed there should not be any issue then. Did you order the gun with a 1 jouke spring?

[@vasilissarakiotis8694]

@@FOXGREEN No the stock spring was the M150 (2.2J) and i have exchanged it for the M110 on the stock barrel .Today i have installed the short barrel and the fps is too low thats my concern .I have tried the M110 with all Fps adjusters and still not close to 1J .Then tried the M150 and i was getting around 0.8 J with out the adjusters .Finally tried the last option M150 and Fps adjusters and i still the performance is too low.Too weird .Imagine if i install the air brakes it will go down to ~ 0,8 J again . The air seal is the same as with the stock barrel ..no issue there. What are you using an M120? Thanks!

[@FOXGREEN]

@@vasilissarakiotis8694 I am totally amazed you are getting 0.8 joukes with a m150 thats seriously not right the airseal is fine you say? Is the piston in the splinter totally dry? If it is maybe get some silicone grease and lube it up not silicon oil it has to be grease. But even so that low makes no sense I am using an m100 worh 8mm fos adjuster and the longest airbreak. Maybe try remove the airbreak and see what power you get with just the m110 on its own

[@vasilissarakiotis8694]

@@FOXGREEN i 'll try that tomorrow ...yea i know it's crazy never experienced something like that.! If i have any more problems i will ask for help once again ! Anyways thanks for your time and help !

[@FOXGREEN]

Let me know how you get on man 👍

[@ShatterSoft]

I just ordered 12mm of shims for the spring and a maple leaf aluminium hop up arm how much will the shims increase my joules by and do you know have much 2mm is equal too. I hope as well that the hop up arm will improve my lift of the bb currently it cant flat hop a .28 will this improve my gun.

[@FOXGREEN]

I dont know sorry man its testing that tells you what you will get and varies depending on the spring you are using also 🙂

[@ShatterSoft]

FOX GREEN thanks I just don’t have a chrono that why

[@FOXGREEN]

Ah ya you need to get one its an essential peoce if kit allows you to tune your gun and not worry about issues on game day id invest when you can 🙂

[@ShatterSoft]

FOX GREEN thanks

[@ShatterSoft]

@@FOXGREEN I got the parts a day or two ago and I have put in the hop up arm but it hasn't made any difference. There is however a small golden cyclinder piece that came with the hop up arm where does this go? Also I tried to drill out the anti tampering pin and that was fine but the cylinder head still won't twist out even after I try all of the allen key tricks to get a grip on it. What can I do

[@kalebsmustang1939]

Ssg24 or ssg10

[@memebo1922]

24

[@FOXGREEN]

At the moment SSG10

[@LegionarHR]

i have 3.3jules in my ssga1,but i am still not happy with range, it have problems on 70meters

[@FOXGREEN]

I am hitting 70 me on 1 joule with mine. Are you using 0.48 gram bbs because you should be. I recommend bls bb's

[@LegionarHR]

@@FOXGREEN i am using novritsch 0.46, i can hit on 70 but its weird, i need to shoot way above the person, my scope is sigted on 60m

[@FOXGREEN]

The only mod I did to my gun and I recommend you do the same is this. The bucking is terrible so buy a modify x range 65 degree one and get the tridos 2.0 tdc Pro. After that use 0.48 gram bls bbs and you will hit 100 m all day I promise 😉

[@LegionarHR]

@@FOXGREEN thanks brother for the info, I would def buy it , but I can find modify 65 in my country, is the aim 65 degree hop up good ?

[@FOXGREEN]

Try Skirmshop.nl or Tridos designs also they both do them 🙂

[@xdwolfcub4453]

Im thinking of getting purple parts for my m4 from a American shop online call timber creek do you think i should?

[@FOXGREEN]

O don't know much about ANGUS or that shop but hopupnis the most important upgrade follower by power so start with thoese parts

[@xdwolfcub4453]

@@FOXGREEN its just a shop that sells parts to make your gun look nicer

[@xdwolfcub4453]

@@FOXGREEN thanks ill get a new hop up do you recommend any ones in particular

[@FOXGREEN]

@@xdwolfcub4453 flat hop your aeg its 👍

[@xdwolfcub4453]

@@FOXGREEN k thanks

[@FoxSickness]

Nice gun man 🤙

[@FOXGREEN]

Thanks man 👍

[@rhysmallie1548]

Hi it's me again I hope to play with you in simtac soon love your vids

[@FOXGREEN]

Thanks man I hope so too :)

[@natjaclarke4210]

Sorry for bothering you again I have my new ssg10 a1 I have put the FPS adjusters in and it was at 0.7 of 1 joule obviously I have to get more to bring the power up but some other problems I have is that the FPS can jump all over the place for example it was shooting at 0.7 and next shot shooting at 0.5 and the hop is very poor on my gun I have only shot it about 30 times and now the gun won’t shoot I just don t know what to do

[@FOXGREEN]

Hi Natja what weight bbs ate you using? First of all the gun takes about 500 shots for the hop up to break on but if youbate shooting and the bb is not coming out you may have the hopup on all the way blocking the barrel so turn it off and shoot it with no mag to clear that bb out. On 1 joule I recommend 0.3 g bls bbs or nov bbs for it. As fir the fps going up and down I woukd say to clean and lubricate the inside of the piston the issues your are having are common and don't worry can be fixed snipers take a bit of knowledge to get them working well but when you do it will be perfect. Add the fps adjuster to get it to the right power and lubricate the gun internally with silicone grease first. Then shoot hundreds of bbs with the hop up turned half on to break it in after that it should be perfect

[@natjaclarke4210]

I use .32 bls I have noticed that everytime I shoot the mag slips out a bit

[@BadInfluenceGreekTeam]

Nice man!! :)

[@FOXGREEN]

Thanks man 😁👍

[@GreyMrFreeze]

Nice video great job

[@FOXGREEN]

Thanks buddy! 🙂👍

[@chris_ackroyd]

To remove the nozzle use a cycling pin wrench - a good one (Park Tools); will be about £10 There’s a good mail order site based north of you in Belfast (sounds like ‘blame-correction-crykels’)🤨 ...and come on (you’re an engineer after all) - you are not using ‘glue’ but an adhesive ...no horses were harmed to make the blue threadlocker🤪

[@FOXGREEN]

🤣 Glue/adhesive its all the same man or " Medium strength locktight glue' to be exact. Doesn't need to be made from horses hoofs to be called glue. Google definitions is your friend 🤣

[@filipmalinowski3283]

It's nice to see a fellow Irish airsoft player. I don't actually play yet because of corona but when it's over I will start playing. Maybe at some point we might meet . and what field do you play at?

[@FOXGREEN]

Thanks man! I mostly play at spec ops or simtac near Dublin 🙂👍

[@filipmalinowski3283]

@@FOXGREEN if it is ok with you at some point I just want to dm you asking somethings about a decent sniper loadout . Is that OK?

[@FOXGREEN]

@@filipmalinowski3283 sure no problem man instagram is the best to reach me

[@nickkeogh958]

Cool

[@silkk_thecigarbrother]

Sweet 👍🏽

[@xdwolfcub4453]

Wassup

[@FOXGREEN]

Wazzaaaa!

[@airsoftpro1591]

First

[@anomalyp8584]

IMPORTANT 1. NO comparison of air brake vs no air brake...you should disconnect the silencer as well to show how much of a difference it makes. Air brakes are regarded as snake oil in MOST cases. 2. Once established the air brakes (you can debate about sorbo pads) don't make a sound difference, you don't need the fps adjuster rings. It is much better to get a tougher spring and cut to the desired power output. A weaker spring with rings will wear out faster, will be louder and won't be as consistent. 3. Locktite: NOT needed, very expensive for the amount and it's not needed to get a good seating on the barrel. I've been running the setup for a long time without it...no problem at all. BOTTOM LINE: Fox green IS NOT an independent reviewer and should state his BIAS ! I do not oppose to him affiliating with Novritsch, but I'm bothered by the pushing of products that don't work and cause needless spending by people not familiar with the topic.

[@FOXGREEN]

1. Air breaks work. This is well know so no need to compare with or without thats a waste of time. If you think they dont work then your very wrong. There is a reason all those in the know run them. 2. Sorbo pads are not that good when compared to a proper airbreak. The aircushion dies all the the work for you stoppi g the slap from ever even happening simple physics. I have had way better results from airbreaks on different setups. Fps adjuster work fine it's the same thing if you don't want to buy a new spring. Infact most people use them the fine tune their springs. All my set ups are fine tuned with fps adjusters even my tac41. No issues with wear my SSG24 still used them 4 years later with no wear. I have never seen a spring wear out in my 15 years of airsoft play every weekend with the same gun for up to a year at times and that's with an aeg two tlwhich shoots way more shots than the average sniper would in a year. 3. Locatite is not expensive especially for the tiny amount required for my setup. This is just my tips as I have found I did need it. Nobody has to take this advice. 4. At the time of this video I was not a Nov Affiliate. Now I am and its common knowledge how do you think you know I am? It's even stated on my Instagram page. but my reviews are not biased infact if they were why would I be making a video on how to improve his gun?? I have had brands approach me that want only positive reviews I don't review their products my honest opion is what keeps my subcribers coming back for more and its wjat keep my channle relvant i wont sacrafice that for a greedy company. Nov actual states he wants honest reviews and feedback I can show you the emails. Plud the negative things I have said in my reviews on his products before have all usuakky been fixed by batch two. That's a progressive company. I find it intresting that you say his products don't works yet in point 3 above your clearly say you have been running this setups without problems?? 🤔 Strange that.

[@anomalyp8584]

@@FOXGREEN thank you for the quick respons! I will reply later on.

[@anomalyp8584]

kzbin.info/www/bejne/oJyXYZV4hJ2Eoq8 This is what I meant. It doesn't do anything for the sound. I also ran with a sorbopad and that didn't help. The greatest reduction in noise comes from getting your cilinder/barrel ratio right, shooting a heavier weight bb, the supressor and weight of the piston. The airbrake does nothing. Unless you have a vid where you do the measurements to prove me wrong. I prefer doing the 'research' myself and not just do it because all the rest does it...a lot of sheep out there and brosciencers. So...who is in 'the know'...not anyone really if you check the forums or the Novritsch support team (the team that MADE the replica).