NSV LED Light bar for the Toyota Tundra Install Steps

[@alexanderrensch7748]

it is expensive..but it is high quality and it’s plug and play..I bought mine as soon as purchased my 2018 platinum..The only tough part of it was feeding it through the firewall... but I’ve noticed with feedback from customers who have bought it in the past, this company incorporates that into the new videos ..thanks guys . And I always get compliments on the look that the light bar gives me truck

[@HeadlightRevolution]

I’m so glad you love it! That firewall part is tricky for sure, I’ve done a handful of these installs and that’s still the hard part for me too. -Chris W

[@jimbotag7236]

I have the same Platinum DC 2018. Any unusual steps in the wiring that you needed help on that differ from this video?? Thanks

[@terrenceharvey6400]

1:31 ​@@HeadlightRevolution

[@Roscoebakerycakes]

Just got mine! Install was super easy and this light bar really does look like it came factory installed. Looks VERY cool and it is SUPER bright! Yes it is expensive but it is totally worth it once you can afford it (I waited six months for a Black Friday sale.) PAY ATTENTION to your wiring! Different trims might have different wire configurations on original connectors so you may have to do some repinning. I suggest contacting the NSV rep before installing the bar to make sure your wiring will work properly. I had a few electrical issues but it was totally Toyota's fault and NSV offers a solution. It's just better to have everything configured before you put everything together.

[@NYC-2-BKK]

I did this install today on my 2019 Tundra TRD Pro and I felt the hardest part was running the 6 pin wire harness thru the firewall. (I decided to send 3 wires at a time to make it easier)

[@Fenixmaster9]

I was doing n install one of these n it's not working, why would he cut the (blue) wire that feeds signal power to the turn signal, instructions say the opposite of what this guy did, I gotta try n figure out what I missed tomorrow morning, any input would be highly appreciated 😊

[@pauln9549]

You did an excellent job explaining the process and the lights look great!

[@HeadlightRevolution]

Awesome, Thank you for the support! That means a lot. -Chris W

[@JLeeChron]

Yes great job on it, there are a lot of side points to use for other things

[@iithelegend8068]

I'm just starting my build on my Tundra while still trying to not break the bank, and when I saw this I thought I hit the jackpot, but I cannot lie, it's quite the cost. But more so reasonably priced due to quality and plug and play, definitely will be putting on my truck. (Not for another year or so), hoping that I remember.

[@HeadlightRevolution]

We have some huge sales during the summer/Black Friday!

[@iithelegend8068]

@@HeadlightRevolution Cant wait!

[@kevint3767]

Can’t wait for you guys to come out for one for the 2020, picking up my tundra tomorrow, pricey light bar however just from your video alone, everything looks absolute quality, the video alone was done very very well and you went through every step, ignore all the haters who say it’s too expensive, if you want to get a $100 light bar and slap it in there, that’s all you, if you want a light bar that’ll look fully oem with custom switches and a high quality product, this seems to be the way to go, will definitely purchase one as soon as it comes out

[@HeadlightRevolution]

You couldn't of said that any better! NSV is working on a version that will work on the 2020, as soon as it's ready, we'll have it!

[@PeterGriswald]

moron

[@tunyung]

This is absolutely a must have if I owned a2019/ 2020 Tundra! Only thing....too much trouble in the installation process! I would pay you to have it done! Since if I had already spend a $1000 why not spend another few$$hundred buck to avoid all that headache!

[@HeadlightRevolution]

That’s very true! It’s a very involved install but as long as you do it one step at a time you’ll be okay.

[@jlp-mtb1391]

I don’t know why I’m watching this, I don’t even own a Tundra.

[@HeadlightRevolution]

... Not yet! 😉

[@TMoua79]

Jigga Funk I’m in the same boat

[@magicdeknight]

One day you will

[@jyg4883]

Same here. Just love the look. One day for sure and one step at a time.

[@bryanpaz7456]

I dont have a tundra either but I've been wanting once since they redid the body style, love the beefy and bulky look of this truck

[@Nathan-wn5mc]

Amazing light. The price is a little harsh, but i guess since it installs so easily and it does look factory, it makes sense. Great installation video. I find it funny that some people mess up on this installation when everything is labeled with numbers. Read people and take your time installing a $1,000 light bar.

[@HeadlightRevolution]

Agreed! It's almost as fool proof as it gets! Definitely worth the price though!

[@nfareview]

Very well made video! I was thinking about selling my current 2014 Tundra TRD DC (with a ton of mods, Kings, etc) for a 2021 TRD Pro CrewMax for more interior room. If I do I'll be buying this. Those that complain about the price need to wake up! Great price for all this!

[@v1antbo]

LOL

[@herbyverstink]

so much room..could put a dance floor in there

[@RobertAWolf]

I love mine, the single best mod ever on my Tundra next to the remote powered tonneau cover.

[@joeyandzoeyspittyadventure8449]

now the remote powered cover sounds like a huge waste of money and just spending quadruple the price to be lazy lol

[@RobertAWolf]

@@joeyandzoeyspittyadventure8449 Lazy for what? You must still have hand crank windows. Besides it's my money and it was well spent.

[@ramoncalderon8449]

This install is crazy....after paying $1k for the light bar ...it should come with free install. Imagin messing something up during install...now your out $1k and the extra cost to repair any mistakes. I love the light bar I just wish the price and the install become more buyed friendly. Hopefully they have a sale soon.

[@HeadlightRevolution]

Totatlly understandable, $1k is a tough price to swallow! Keep an eye out on some sales, this is something that we typically include in our sales!

[@ramoncalderon8449]

@@HeadlightRevolution thanks 4 the response! I will be on the look out for the sale!

[@tallll70]

Geeezzz, it does look great i admit, mostly just on, not sliding left to right, but what this hood scoop air opening came down to be used for. They really suppose to be covered on road, they not suppose to release inspection sticker if not for obvious reasons.... It is really nice sleek spot for offroad trucks light, instead of ugly retrofit box on roof, i'll give it that

[@HeadlightRevolution]

Thanks for watching!

[@nogills_diver3233]

Great video. Can this lightbar work by connecting it to a trigger controller? I want to avoid going through the firewall.

[@HeadlightRevolution]

I'm sure you could!

[@waqarsyed6641]

Awesome work dude wish Toyota did it from the factory

[@HeadlightRevolution]

Ya, that would of been cool!!!

[@phil1723]

Nice quality lights, but I would not spend $1K on a light bar even if I had the money, drop the price to under $500 I would consider it.

[@HeadlightRevolution]

to each their own!

[@JLeeChron]

No doubt, way to expensive, but nice product!

[@buddybuck]

It's absolutely worth it!! I just had mine installed in my Army Green Tundra Crewmax. It's insanely awesome!! Thanks Headlight Revolution! You guys were amazing to work with. I'll be adding the new pictures this week: www.tundras.com/threads/my-new-2020-tundra-trd-pro-army-green-woooof-2-0.55315/

[@jorgealvarez1558]

1k lol, does this light bar give you a discount at the gas pump 😂😂

[@buddybuck]

Jorge Alvarez haha I wish! ✊🏽

[@Fenixmaster9]

I was doing n install one of these n it's not working, why would he cut the (blue) wire that feeds signal power to the turn signal, instructions say the opposite of what this guy did, I gotta try n figure out what I missed tomorrow morning, any input would be highly appreciated 😊

[@HeadlightRevolution]

Reach out to us! [e-mail] or 218-755-5200

[@thrashmetal7588]

Bad ass light and the fitment is outstanding but $1000!😲

[@HeadlightRevolution]

It all comes down the the quality and warranty.

[@joejr9653]

Would love to install on my tundra but it's crazy expensive.

[@HeadlightRevolution]

I feel you, but people find a way to afford the things that are important to them! Good luck!

[@sailorkid94]

Headlight Revolution god damn 😂 I guess people in Africa are starving because food isn’t important to them, or housing isn’t important to homeless families.

[@kromekicks]

How much is this?

[@510kon]

Joe Jr here you go. store.ijdmtoy.com/products/led-lightbar-kit-35-965?variant=19878770999399&Google%20Shopping&gclid=EAIaIQobChMIwdvF0t7O6gIVLh6tBh3RdgO9EAQYASABEgKW5_D_BwE

[@gerard4441]

sailorkid94 ooofffff lmao

[@tundrav8georgia]

Just received mine today from you guys thanks

[@preamble466]

for pin #3 on the 12 pin harness, why not pre-install a dummy pin #3 to keep people from screwing it up?

[@HeadlightRevolution]

I am not sure on that, this is a harness and product made by the company NSV Lighting, you will have to check with them if you are wondering why they designed something in a certain way! Have a great day!

[@jimmieg6218]

I used lamin x amber film to cover the accent section for drl marker lights. Works well but cuts down about 20 percent of light. Wished nsv would make a amber drl in the future.

[@jcb9490]

Completed my install today, fishing the wires wasn't nearly as easy as you made it look but I got it done, fit and finish is impeccable and wiring harnesses are OEM quality, video is far more comprehensive than the booklet. I decided to use the 3 in 1 switch instead of the replacement panel, it was more inconspicuous and less ostentatious, more simple cleaner look. Very very impressed with the quality of this product NOTE: The 3-in-1 also requires the red and blue wires to be clipped to the cigarette lighter harness, the booklet doesn't mention this specifically

[@peteburns8352]

Great video. I have ordered this. I have a 2019 tundra TRD pro. Question: 1). Do I need to cut the blue wire on mine? I’m not sure if my headlights are considered LEDs. 2). My switch power panel looks different from the panel you showed in this video with the “security” - will this model fit my truck?

[@HeadlightRevolution]

For assistance with this product please reach out to our CS team! 218-755-5200 [e-mail]

[@johnotam7529]

Thanks for making this video. It was a big help with installing the NSV LIGHTBAR

[@AH-vo4ww]

I bought mine at a discount during July 4th week... Came out to around $850 or so... I have gotten compliments on It also. This light bar isn't for the "average Joe".

[@HeadlightRevolution]

It really is a cool piece of equipment, I’m glad you got to take advantage of the sale!

[@WildExposures]

I have 2021, and if you can plug is up without removing the front panel and light you have baby hands! Maybe the 2020 is larger?

[@taliskertime1668]

I agree it’s pricey but the quality, fit, finish is superb. I’ve wanted one for 6+ months. Head light Revolution had a 15% discount for July 4th. Couldn’t resist any longer !

[@HeadlightRevolution]

there you go! How did you like it once you installed it?

[@robertwillis4061]

We don't have anything like this here in the UK. But I like the idea, except the 'kitt' lights. As spots / driving lights great

[@HeadlightRevolution]

It’s a pretty neat product that makes good use of the space that’s for sure. Also, We ship to the UK!

[@mikewest712]

Came hear just to get a reply from the company about how people afford things that are important to them. Im a tundra owner, they are crap off road. Majority of these trucks will never leave pavement. Lights are offroad use only. If a thousand dollar off road light is important to anyone with a "off road" vehicle with 2 open diffs. Save that money for a lsd, or a starter, or tires,or air bags, or a bed cover, or a new driveshaft, or seat covers, or a decent sound system, or better brakes.

[@HeadlightRevolution]

To each their own!

[@artgreabco6757]

My tundra has 6inch lift kit. will these bar blind the oncoming traffic? is there any way to adjust it ?

[@RichBarschdorf]

Love this guys haircut.

[@HeadlightRevolution]

Oh yeah?😄

[@michaelbambarger813]

Great video, probably gonna get the bar, however, what kind of tires are those?

[@zipnasty2154]

If I put Morimotos front led head lights can I put this bar in my 2020.?

[@marlonmaradiaga111]

I got a 2017 tundra .where can I buy 1 that fit my tundra look nice and thanks for the way you explain everything.

[@HeadlightRevolution]

Link in the description! 💪

[@larsgardian]

Please make available for 2020+ Platinum (those auxiliaries are different which I assume is why it’s not yet available) in AMBER and I’ll buy it yesterday. Seriously though, please!

[@xiaoyili539]

Is there any way you make one with one switch on and off not with all the other thing cause I have a switch panels and want one button on and off

[@HeadlightRevolution]

There is nun unfortunately.

[@angelnava6850]

Where are you located to install on my truck

[@Jaimeleon20]

I just installed this 100% correctly, light bar works perfect ! However , my taillights and license plate lights are not working as they should at night. Only the blinker and brake lights work in the back. Front side marker bulbs are off as well, when they are suppose to stay on as well at night. Any ideas what could be the problem ? Thanks

[@vvsstudios]

Did you ever figure out the problem ?

[@Jaimeleon20]

@@vvsstudios yes, took it to Toyota Service Department and they said one of my connections needed a Ground. The fuses were popping without it, which caused all the problems. But it’s been fixed for a while now👍🏻 light bar is great.

[@winstonrampersad5152]

So I hooked mines up today and it's blowing the fuse for the rear lights is it because I didn't cut the blue wire I have a 2018 tundra with factory LED lights help please

[@HeadlightRevolution]

We can help, shoot us an email and we can go ever everything that you will need to do in detail. [e-mail]

[@webbdm007]

I have the NSV knight rider bar. I installed new LED headlights: now when I turn the truck off & lock it the light doesn't go back and forth. I didn't touch anything on the lightbar and to note every thing else works correctly. Any ideas why?

[@paul132]

When or are you working on a version that will work with 2020+ models??? Thanks

[@HeadlightRevolution]

We have that available now! Make sure to include the 3-in-1 switch! www.headlightrevolution.com/NSV-Hood-Mount-LED-Lightbar-System-Toyota-Tundra-14-20_2

[@andrewbirisan]

So awesome! But will it work with my 2020 platinum tundra?? It is loaded with tech and all the buttons are used up under the infotainment area...

[@HeadlightRevolution]

I am sorry to say that this will not work with that 2020 model Tundra, but NSV is working on a lightbar for that vehicle as well! They will have that available sometime late this year, and we will keep you posted when that is ready to order!

[@andrewbirisan]

So awesome. Thank you for the reply.

[@HeadlightRevolution]

Not a problem, let us know if you have any other questions!

[@highpro1394]

Sweet. I have been wondering the same thing. I want that light bar but I too have a 2020 tundra platinum. Cant wait to see what they come up with so it will work with my truck!

[@ruelramos1822]

Do you have for tundra 2021! Off road

[@Fenixmaster9]

Is there tech support for this lightbars??? Or some one that can help me troubleshoot, thank you in advance

[@HeadlightRevolution]

Sure, reach out to us! [e-mail] or 218-755-5200

[@kimojon9665]

The night rider vibe goes with the truck since Toyota hasn't updated Tundra since 1980.

[@HeadlightRevolution]

Ha, That is so true.

[@shawnrichards5016]

...if installation was included, yes, in a heartbeat. Looks awesome though

[@HeadlightRevolution]

Haha, thanks for the comment.

[@davidlam569]

Hello I just bought the Jeep Grant Cheeroke 2020, the head light is yellow too dim. Is the anyway I can change the bulbs to HID lights bulb?

[@HeadlightRevolution]

I do not recommend an LED or HID kit for Headlight use, as they are not DOT Compliant and are not Legal for Street-Use. If you wish to upgrade your Headlights, I would suggest looking into a Brighter or more White-Colored Halogen bulb setup like Philips or Osram, which are DOT-Compliant. If your vehicle is Strictly Off-Road use only, or along the lines of a Privately used Farm truck, then you may upgrade the Headlights, as they are not being used on Public roads/areas. If you have any Questions for me, please email us directly and we'd be happy to help out where we can. [e-mail]

[@mr.sikalasinh6232]

You just earned yourself another subscriber

[@HeadlightRevolution]

🙌

[@chris12b23]

It states that this will fit a 2020 in the title and I loved it, but when I went to the link it says it won't fit my Tundra cause of a new switch panel. Make this work....

[@HeadlightRevolution]

The 2020's have a slightly different switch panel design, and that's the only difference. NSV is currently working on a set up that will allow this bar to fit the 2020s!

[@ruelramos1822]

Does this one work for tundra 2021

[@kimsankong8154]

I love that light bar but I don’t like flashlight just need light bar only u another the same that light without flash light?

[@HeadlightRevolution]

Not at the moment no.

[@JV-vl7nw]

So just installed the light bar, but the main light bar isn't turning on. The swipe effect and drl is working. What could be the problem?

[@HeadlightRevolution]

Give us a call or shoot us an email if you're still having trouble. Phone: [phone] Email: [e-mail]

[@Fenixmaster9]

Having the same issue here

[@Fenixmaster9]

Where u able to figure out the issue I'm having the same issue except nothing works

[@jorgelandero23]

So to use the NSV light bar high beams needs to be turned on?

[@HeadlightRevolution]

No you will flip it on. Key Features: 1: Lock and unlock function: scanning/swipe effect 2: Accent Lights: Daytime running mode for road use and increased visibility 3: Full light bar function 4: Scanning/Swipe (Knight Rider Style) function 5: Disable DRL Function

[@jorgelandero23]

I do have the scanning function when unlocking and locking but I don’t have any other function do you know what it can be? Please help .

[@marcogonzalez9207]

I have the same issue Only swipe effect and Nothing else the switch it doesn't even work

[@TheJctloera]

NICE!!! can't wait to put that LED on my 2019 TRD!!

[@HeadlightRevolution]

You’re going to love it!

[@alexanderorozco685]

@@HeadlightRevolution where l get this??

[@gityerkneedahn]

If I see a 20% Black Friday or something similar I’ll definitely consider it. A clip on red Perspex cover would be awesome too!

[@HeadlightRevolution]

Make sure to subscribe to the channel, If we have any deals going on we'll usually post them here first!

[@Fatenah1973]

They are having a 20% off right now!

[@hhannibalobryan8157]

If I replace my halogen headlight bulbs with gtr 2,0 H4 leds, would I still need to cut that blue wire?

[@Ryno041]

I also pose this question. If the factory bulbs have been replaced with led's, does the blue wire get cut or remain intact?

[@HeadlightRevolution]

🧡

[@BriManFL5CTR820]

Need help! Followed this to the T. Have a 2016 and upgraded the headlights to the new OEM 2019 lights. Light bar works but now I get the hyper flash on my left turn signal and won’t even turn on. Also, my fog lights won’t turn on now. Thoughts?

[@HeadlightRevolution]

Hit our CS team with a call or email and we can get to the bottom of this with you! 218-755-5200 [e-mail]

[@JTIvan777]

Do I have to cut that blue wire on my 2017 tundra? I upgraded from Halogen headlights to LED headlights, and used that harness wiring to upgrade my headlights.

[@HeadlightRevolution]

Reach out to our CS team for help troubleshooting! 218-755-5200 [e-mail]

[@coloradoboo1071]

I love it but the price is prohibitive....does HR give military discounts to us Vets??

[@HeadlightRevolution]

We do, reach out to our customer service team to inquire about this! [e-mail]

[@sergiohernandezvazquez5006]

Would this light bar fit my 2021 limited tundra? I’d love one for my tundra

[@HeadlightRevolution]

It would!

[@mattrichard1792]

I have a 2020 Tundra TRD Sport. My stock panel has 3 USB ports along with the 12 volt plug, etc. Those 3 USB ports are exactly where the lightbar switches would be. Would I have to lose one of my USB ports? Is there a new panel available? Also (I'm just wondering), why does the blue wire on the turn signal plug need to be cut?

[@HeadlightRevolution]

Unfortunately that light bar is not out for the 2020 Tundra, but when it is you will not have to lose those USB plug ins when installing the light bar!

[@shauncrawford2349]

Hope this isn’t a dumb question...but is this light bar street legal? As in can I drive down a normal street or the highway with this light bar on?

[@HeadlightRevolution]

In most jurisdictions you cannot drive with a lightbar like this on the highway. They are really designed for off-road use only.

[@peteburns8352]

Excellent video! I saw on another video from HR that these NSV lightbars can do a very quick flashing mode. I just bought and installed these but I didn’t see how you can enter the quick flashing mode where all the lights flash quickly. How do you get that functionality?

[@HeadlightRevolution]

This feature was removed, kind of a safety issue! 😅

[@jasonturner1045]

2 questions: 1) why do you need to connect to the headlight motor? 2) why did you cut the blue wire if you have factory LED headlights??

[@HeadlightRevolution]

These questions may be better directed to NSV, The company that makes the light bar kit. We followed the latest instructions from them when making this video and everything turned out great!

[@Hou_J]

Is there a way to turn off the “drl” on the light bar? It looks a bit silly and with the headlights already being bright on their own, the extra lights on the light bar might be a bit extensive.

[@MC4D.]

Can the center part light up with out the 2 outers or is it just those 3 functions?

[@HeadlightRevolution]

The center part will only light with the outer parts, that is not designed to have the center on otherwise. Let us know if you have any other questions, we are here to help!

[@1911DK9]

Very nice but very pricey and a lot of work 😦😓 great video by the way!!! 👌🏻 👍🏻

[@jaimealmaguer4585]

Anything for the older tundras? I have a 2012.

[@HeadlightRevolution]

Nothing like this but we do have options! Check out our website!

[@ls1powered240sx]

Is the good buldge made of metal? I guess that is decorative hood scoop.

[@HeadlightRevolution]

The hood scoop is made of plastic, The lightbar itself is made of metal.

[@mrocco36]

do you have any lightbars for the 2nd gen tundra?

[@phatbuddha1]

Do they have a cheaper model that is one solid lit light bar? I don't need the DRL or the scanning lights. A single switch will do and without all those T-harnesses

[@HeadlightRevolution]

I wish they did, We do get asked about that every now and then. As of right now they don’t!

[@osklgllv2080]

Hello HeadLight Revolution ! Do you have please this gear for 2020 TUNDRA TRDPRO ? Thanks a lot. 👍🏽

[@anp3617]

I have a 2016 1794 and I upgraded my halogen headlights to OEM led headlights using the plug and play harness from you guys. Do I still need to cut the blue wire or any wire?

[@HeadlightRevolution]

You will need to cut that blue wire if you do not have a Non-DRL 14-17 SR5 Tundra, otherwise you will be good to go! Let us know if you have any other questions, have a great day!

[@JTIvan777]

Hey, Did you end up cutting that blue wire??

[@rodez3106]

i wonder if this can be installed in a Tacoma....?

[@HeadlightRevolution]

It cannot, this is specific to the Tundras!

[@rockyvang]

What kind of wheels do you guys have on this truck. Love them.

[@HeadlightRevolution]

This was a sharp looking truck, We loved having it in here! Unfortunately I don't have the wheel info, It belonged to a customer.

[@TexanBlaster]

Watched most of this video then checked the price😮

[@stevensmith5784]

Yup lol I was like well nvm.

[@lanzotv]

So let me get this straight, the lightbar’s drl’s are going to be on all the time?

[@HeadlightRevolution]

You have a switch to decide if they stay on or not

[@dougsonnier8413]

was a piece of cake except the grommet i have a 21 an all the brake lines run right on top of it other than that just like video

[@HeadlightRevolution]

Glad the install went smoothly for you!

[@caliexclusives7505]

Why do u have to cut the blue wire for the DRL, can u have the light bar without cutting the drl cable

[@HeadlightRevolution]

If you leave it connected you will have issues with the NSV light bar functionality. Certain trim level Tundras need it, Others don’t. There would be no benefit to leaving it connected.

[@gromitbear9231]

Do we need to conenct it to the turn signals? or can we skip that part?

[@HeadlightRevolution]

All steps in this video should be followed to ensure functionality of the light bar!

[@streetwiseguitar5113]

Will this work for a 2007

[@HeadlightRevolution]

It will not.

[@joelbayot4706]

Hi sir,where are you located at How much you charge to do my tundra.

[@HeadlightRevolution]

We are located in Atlanta, GA! But we do not install lights in-house. Please reach out via email or phone so we can help find an authorized dealer near you! Email: [e-mail] Phone: [phone]

[@billymorgan7717]

That looks amazing 👏

[@HeadlightRevolution]

It is!

[@Warmspringsrezbuck]

Will this work for a 2012 tundra Rockwarrior the whole assembly? What’s the price?

[@HeadlightRevolution]

Only for 14+ Tundra models.

[@iamjackalope]

What I would like to know is how well does this light bar hold up. Does the extra weight of the light bar cause any issues? Toyota likes to use an awful lot of plastic in the 2019 Tundra and I'm a bit concerned that after the hood gets slammed a time or two or I take the truck off road and the truck takes some hard bumps that the extra weight attached to this plastic part that honestly wasn't designed to have this light bar attached to it might come off and possibly damage the "hood bulge" or worse. Has anyone had one of these light bars installed on their truck for any length of time and can attest to their durability? Does it remain looking and acting like an OEM piece or does the extra weight of the light bar cause any damage to the plastic "hood bulge"? I like the look of the light bar and maybe it might come in handy. I don't care much for the $1,000.00 price tag though. I'm considering it but I would like honest answers to my questions first though. Anybody got one of these?

[@frankthedanktank]

Add an amber color and a pattern of just three in the center so it looks like modern grill running lights when lightbar mode isn't in use. Then I'll buy.

[@HeadlightRevolution]

Now that would be an awesome feature!

[@richg.7752]

Would be very nice to see a "simple" version of this bar. Same location Just a plain on/off bar Wouldn't need any of the patch harnesses just a relay harness under the hood and the replacement console panel or just the option to cut the original to add one switch

[@HeadlightRevolution]

That would be nice, Maybe they’ll offer it someday!

[@WildExposures]

I second this ............why do we have to take the truck apart to wire this light up?

[@kamasamoa6124]

Will this fit a 2020 tundra crew max?

[@kamasamoa6124]

The website says 2014-2019.

[@HeadlightRevolution]

Yes

[@jameshovey8301]

Excellent installation! Excellent light bar. Im getting a 2021 limited in about 3 weeks. Im wondering if they bothered making the needed changes to fit the last year Tundra before the redesign, and if so, can I drive to Atlanta and have you do the install? The trip will be much quicker than installing it myself.

[@HeadlightRevolution]

We dont do installs in house, sorry!

[@lloydedmonds8775]

HaHaa great question! Just bought a ‘21 1794 Edition and would love an installation also lol

[@lloydedmonds8775]

Great Video! You made it look easy!

[@HeadlightRevolution]

Thanks Lloyd!

[@lloydedmonds8775]

@@HeadlightRevolution I’m in VIrginia; wanna do mine 🤗

[@HeadlightRevolution]

We are in Georgia, a bit of a drive!

[@lloydedmonds8775]

@@HeadlightRevolution lol Not at all if your looking for a nice vacation in Virginia Beach 🤗

[@305ssmonte5]

That light is very cool.

[@HeadlightRevolution]

It’s so fun to drive with, Our shop Tundra had it installed and I borrowed it for a few evenings. -Chris W

[@jrg94555]

I have the first-gen. NSV lightbar. I've done so much splicing to my old wiring harness over the years after installing the OEM LEd lights and then resistors. I kind of want to start fresh since my it looks like crap now. DOes HR or NSV sell the wiring harness separately? Specifically the T- Harness?

[@HeadlightRevolution]

We may have a spare harness laying around. Shoot us an email and we'll see if we can get you set up with one! [e-mail]

[@KevinB-pp5qt]

Is one available for the FJ cruiser? It has a gap in the hood too.

[@HeadlightRevolution]

I don’t believe NSV has an FJ Cruiser option just yet, Sorry.

[@DK-sv9zz]

Does water get past the light bar and into the engine bay when it rains? Does anyone know?

[@HeadlightRevolution]

Nope! Not an issue!

[@aaproductstutorialsbyallra8608]

Does it have a strobe function?

[@HeadlightRevolution]

No, it does not.

[@charmnGUY]

Love this! Knight Rider 3000

[@HeadlightRevolution]

It’s one of our favorite products here!

[@ebinrock]

Actually, the TV movie "Knight Rider 2000" (1991) depicted a Knight Industries 4000 car. So you'll need a higher model number!

[@billingscraigslist2996]

Will this fit a 2021 Toyota Tundra TRD Pro as well as for the interior switch plate?

[@HeadlightRevolution]

There is a new version coming out specifically for the 2021 model with a new switch plate.

[@davidclayton32]

Great Video, would you happen to know the wheel and tire size on the truck

[@HeadlightRevolution]

No, sorry!

[@edwardllorens]

Not to get sidetracked, but was just wondering if the Tundra in the vid is a 2019, did you have the hood bulge and grill painted? I have the same paint color” Cement”. I thought to get this look you had to order a specific grill and that didn’t guarantee that your color was available. Just really love the aggressive look this gives the Tundra, but wasn’t sure what it would look like on a Limited. This is probably not a Limited but the satin chrome grill inset is the same as mine, and yours looks great.

[@HeadlightRevolution]

This Tundra belonged to one of our customers, I believe it was stock from the dealership but I could be mistaken!

[@newlooktailgating8010]

Hey, the tundra is a Limited, the hood bulge and grille are from a 2017 trd pro in cement. The surround was removed off the trd pro grille and swapped out with the chrome surround on the limited. The hood bulge is able to be purchased from in the cement color

[@edwardllorens]

New Look Tailgating Thanks for the info and great job. I like the look. I also saw your grill swap out vid on your channel. Looking forward to this mod. That LED light strip in the hood is sweet.