Lister CS 5/1 1939 Timing

  Рет қаралды 92,573

Nick's General Videos

Nick's General Videos

Күн бұрын

Don't forget the timing! I transposed the marks on the idler gear to the teeth for the camshaft timing to make things easier.

Пікірлер: 20
@AmitKumar-wx4cy
@AmitKumar-wx4cy 6 жыл бұрын
Very good sar apka video chamsapat Se mujhe bahut help mila thank
@jurgendrees3136
@jurgendrees3136 10 жыл бұрын
Hello, my cs 8/1 leak öil at Crankshaft Bearing Carriers. Is it ok to make a new paper or must I the cramshaft distanced Ihave no instraction for dectanced the cramshaft? And the fleyweehl dictance at the Cramshaft Bearing Carriers? Thanks for help
@trevortrevortsr2
@trevortrevortsr2 14 жыл бұрын
Just bought a 1932 Lister cs 1/5 in bits - its been resleaved but the guys bought an alloy piston as gen Lister cast iron ones are unavailable - what do you recon - rebuild with the alloy or buy an idian cast iron one?
@eshwarneshwarn4851
@eshwarneshwarn4851 3 жыл бұрын
Very good job
@coolumax
@coolumax 17 жыл бұрын
Very Interesting, they are the things I didn't meddle with.
@adesolaojoadewale
@adesolaojoadewale Жыл бұрын
There is a specific dot for timing or not
@hotrod3737
@hotrod3737 17 жыл бұрын
great Video. I only have an Indian clone and would love to get an origianl CS. I have found some pretty cheap in the UK but the shipping to the USA is very expensive.
@deepakmurar5024
@deepakmurar5024 6 жыл бұрын
Hello My 10hp Lister engine not auto control speed Auto paly high speed After some time auto very slow Please give me solution
@nwashin1
@nwashin1 6 жыл бұрын
Deepak Murar I'm no expert on Lister Engines. I'm assuming you have a twin cylinder Lister. Try oiling the shaft that goes in and out of the injection pump and all the other linkage joints. Other than that, the counterweights on the cam shaft may be starting to seize, in which case you'll need to free them off.
@mohinderkumar5365
@mohinderkumar5365 5 жыл бұрын
change the governer rank
@nanhelal943
@nanhelal943 4 жыл бұрын
@@nwashin1 tiingvolkarvatay
@nanhelal943
@nanhelal943 4 жыл бұрын
@@nwashin1 listaringintayiming
@izurichvince8
@izurichvince8 4 жыл бұрын
What will happen if my engine is not in timing
@lendusaquid
@lendusaquid 17 жыл бұрын
Love it, So when are you going to write the Haynes manual ?
@enginelover1
@enginelover1 12 жыл бұрын
Nice and interesting video you have there. Thanks!
@jeetukumar9757
@jeetukumar9757 6 жыл бұрын
sir please aap se bat Ho sakti hai
@pritam.ganvit5651
@pritam.ganvit5651 4 жыл бұрын
Sir Full fitting diesel engine In10 hp Lister engine. please sir
@அழகாபுரம்இரா.குணசேகரன்பாமக
@அழகாபுரம்இரா.குணசேகரன்பாமக 4 жыл бұрын
You timing is not correct.. Wrongly..... This is followed not start engine..... You correctly teech you..... Or this video deleted....
Lister CS 5/1 1939 Piston & Cylinder
9:07
Nick's General Videos
Рет қаралды 55 М.
Lister CS 5/1 1939 Fitting Crank
10:01
Nick's General Videos
Рет қаралды 84 М.
إخفاء الطعام سرًا تحت الطاولة للتناول لاحقًا 😏🍽️
00:28
حرف إبداعية للمنزل في 5 دقائق
Рет қаралды 77 МЛН
Kluster Duo #настольныеигры #boardgames #игры #games #настолки #настольные_игры
00:47
Lister CS 3.5 hp - Complete rebuild.
7:49
neseng
Рет қаралды 12 М.
CS Lister putting together and test run
14:42
Ross M
Рет қаралды 14 М.
LISTER CS 3.5 hp
11:59
neseng
Рет қаралды 68 М.
Timing a Listeroid camshaft
4:59
The38AC
Рет қаралды 166 М.
Lister engine recovery part 4 Reassemble plus 1st startup
14:15
rustymotor
Рет қаралды 152 М.
Lister Petter repair 2
12:35
Vlog Đậu Đậu
Рет қаралды 94 М.
Do Longer Camshaft Splits Affect Performance? | Engine Masters
14:40
MotorTrend Channel
Рет қаралды 195 М.
Lister CS 6/1 genset - cold start and load test!!
4:03
Manna Stander
Рет қаралды 29 М.