NZXT H210 Review | Best Budget Mini ITX Case?

[@SuprUsrStan]

The H210 can be found on Amazon at geni.us/R2K5J3A. If RGB is your thing, then you might want to check out the H210i also on Amazon: geni.us/ciScRb

[@vip01]

I just built in this case yesterday. Actually a H210 i model. Not being familiar with it and the instruction were in Micro Mini print. But, it has a fan and rgb management module in the back that connects to the Motherboard USB slot. This is powered by a Sata power cable. I have three fans in it. You have to download an NZXT program to manage the fans and built in rgb lights. Mine is red and black. The red thing that looks like a strap is a cable hold down, which makes the layout look a little neater. Cable routing in the back is pretty nice.

[@echoeman]

What GPU did you go with?

[@BreakingPintMedia]

Great overview! Answered pretty much every question I had. Thanks for taking the time!

[@asp4228]

This should have more views. Informative; great job!

[@barrygriffies459]

Still running with this a 5600xt. still love it!

[@steinernder1684]

How about the thermals of the Graphics card? Does it have better thermals when using a fsx power supply instead of a atx supply?

[@SuprUsrStan]

PSU size really won’t make much of a difference. Don’t know about GPU thermals. I never installed one for this system.

[@mfhm5700]

I really like this case with a custom watercooling loop, think i will try it.

[@bryanwesleyko564]

First! Was planning to build an ITX pc, thanks for the info!

[@kiinqdoge5611]

Aren’t itx parts more expensive? Like motherboards and sfx power supplies

[@hcaps3129]

Yh, but you can fit an atx psu inside this case

[@kiinqdoge5611]

@@hcaps3129 yea ik but you get better gpu airflow with an sfx one

[@BreakingPintMedia]

@@kiinqdoge5611 it's nice having the option of one or the other, though, vs some cases where you're stuck with SFX. If you're transplanting from an existing full size build, it's 1 less thing to worry about immediately and if you want to improve airflow down the road, you can spend the money once the initial buyer's remorse has faded... :-D

[@Yadro767]

Good job, Stan.

[@Jeymez]

can you fit a micro atx board in this case, or is it just mini itx only. the build i have in mine is similar, except for a couple differences. CPU: AMD Ryzen 5 5600G APU GPU: Radeon RX 6500 XT MSI Aero Itx mobo: Gigabyte B550M DS3H Micro ATX Ram: Corsair Vengeance LPX ddr4 16gb 3200mhz Storage: Samsung 870 Evo 2TB SSD Power Supply: Small Form Factor 600 watt 80+ Gold

[@MikeBob2023]

Thank you, Stan! 🙏🤗👍

[@AniketRamgi]

am i able to connect the 2 case fans into one or do i need a fan splitter?

[@SnowmanisChapin]

Nice video! Quick question, can I put the radiator outside of the dust panel and on the inside have the fans? Just for gpu clearance.

[@kiinqdoge5611]

U can but it will ruin airflow

[@RojasTKD7]

Hum, that two slot GPU limitation is a deal breaker. the majority of modern GPUs surpass that. There are many much smaller option that will allow for a 3 slot cards. I was considering am H210 as there's one locally for $30, but I'll pass. I think the NR200 is a better budget case. It's a good bit smaller (a true small form factor cases) and can take 3 slot cards. All while being priced in very reasonably.

[@Tekillyah]

Wish I can put 2x3.5 hdd in here it would be perfect.

[@azurelas1]

You can: next to the PSU an under the GPU.

[@laylajansen7503]

I got one next to the psu

[@danfosyblack8704]

great

[@losae9401]

isn't this an old case a yr ago, cm nr200 is smaller n better,

[@mathewsjoy8464]

Phanteks p200a just beats this case now

[@MrLahrbrat]

Good case love mine.

[@kiinqdoge5611]

Same

[@laylajansen7503]

What one do you have I have the blue one

[@MrLahrbrat]

@@laylajansen7503 I have the black and red one

[@laylajansen7503]

@@MrLahrbrat i have the same one with i5 10400f rtx 3070

[@kornelijekovac9793]

Lame chassis. It can't fit mATX.