NZXT H6 Flow vs H9 Flow

[@splitwire]

bro said excuse the cable management and showed the most clean cables i’ve ever seen 😭

[@oathkeeper3p]

I was about to buy the H6 over the H9, but I have the same AIO. Thanks for the info and saving me a lot of trouble.

[@baxterwillers8589]

I'm going to get the H6, you can buy a dust filter for 10 bugs and if something doesn't fit I'll have to do a bit of sawing

[@NotCommanderShepard]

I'm currently using the H9 Flow. The only reason I would have picked the H6 over this would be the I/O ports being right in front of the case. It's such a big plus by itself. Other than that, H9 is the better option in every single metric you can think of, if size is not an issue. It's by far the easiest case I've ever built a PC in. Extremely easy to cable manage, great airflow and fantastic build quality. One huge downside however, as mentioned in the video, is the absolute GARBAGE default case fans. They aren't even PWM. They're loud, low airflow DC fans. So make sure you have the budget to invest in some Arctic P12s or similar decent airflow fans.

[@zork9410]

I have a H6 Flow + Arctic Freezer 3 360, + Gigabyte Aorus B550 Elite V2 and it fits. Very tight though, but fits

[@Basrawulf]

I know that AIO, THX 4 the video. ill buy a H9. My Arctic Freezer 360 is just to FAT.

[@Kaninox]

Great video man. Just exactly the info I was looking for

[@CarlosRincon]

Thanks for this video! it definitely helped me to decide between these two. H6 is better for me!

[@hoofhearted4]

While I like the smaller size of the H6, I dont see that it has anything over the H9 other than the angled fans being slightly better for cooling, but also I hate the look of that lol. H9 has more space, fits the radiator I also am looking at, and dust filters, which are an absolute necessity imo. Idk yet if im 100% sold on the H9 but I would definitely choose it over the H6

[@mariaeugenianavarrete-jg6gf]

estoy analizando tambien entre estos dos aunque lo compraría en oferta no a $160 como esta ahora

[@lysergicaciddiethylamide6127]

Aorus x670 mobo and the nzxt kraken 360 fits perfectly. I had no problems. The H6 is a cooling beast.

[@benzibenzino2385]

the h9 has better airflow bruh

[@lysergicaciddiethylamide6127]

@@benzibenzino2385 I mean I’d hope so seeing how it’s their flagship and cost more money. Bruhhhh

[@fussnote1758]

The radiator of the AC is 38mm, that one of most of other brands are 25-27mm.

[@YuniorGamboa]

That is exactly the video I was looking for! b Thanks Mat. Your channel is going to blow up anytime now ;) Thanks for the comparison

[@MrMataroblue]

Hi, very good video, I wanted to ask you about the AIO. What is it that prevents the AIO from not fitting in the h6? I have a case that shouldn't fit either, it crashed with the motherboard and the rear fan and the screw holes didn't match, but I managed to mount the AIO. Sorry for Google tranlator.

[@MercuryTV]

imgur.com/a/cpCCfud I took this photo of inside the H9. The gap with the red arrow basically doesn't exist at all inside the H6, so my AIO was being jammed up against my motherboard's rear IO. The orange circle is actually the mark/dent I made trying to force it when I was building inside the H6. Had the overall fans+radiator been slimmer, it would have fit fine, but the Liquid Freezer series use a 38mm radiator vs most others which use a 30mm. Hope that helps.

[@MrMataroblue]

@@MercuryTV thank you so much

[@Jack_Hunt]

The H9 is HUGE! Like a fish tank. I agree not much character. I think whats really odd is the fans on the H9 aren't pointing at the board at all. They are facing away. Why would they do that? Most cases have FRONT fans pointing at the board, or in the H6 case, 45 degree hitting it from a different angle but the H9 points it away. How does that benefit it? Also can you tell me if you think the Fractal beats both of these? I am considering ALL 3 right now + the new ASUS ProArt PA602 case. Wondering if you had to place them in order which would be your top choice, second choice and third? Thanks great vid!

[@MercuryTV]

Honestly, yes, I think the Fractal Torrent is a much more unique build option than the H9 Flow. I don't regret moving to the AIO + dual chamber, but I am definitely keeping the Torrent around for next time I do an all air-cooled build. The 90 degree turn from those intake fans to the components is goofy for sure, but whether you believe it or not, my temps are still great with the H9. The two 140 mm fans on the bottom are blowing cold air directly into my GPU, and that 360mm Liquid Freezer keeps my CPU temps low as well. So for me, it would be H6 Flow (if you can fit your build in there)/ Fractal Torrent (if you're doing an air cooled build) tied at #1, with the H9 Flow at #3.

[@manguelitomonteverde]

no fan hub? thats a boomer, cheaper cases already have one. I totally agree H6 has more personality. Was doubting of the H9 or another brand. Might sound silly but the fan hub might lean me towards another brand

[@Underground.Rabbit]

NZXT China was selling fully fan equipped version of H6 Flow. Full F140 Core RGB fanned one was 160$, Full non RGB F140Q fanned ones were at a bargain of 110$. Not sure if folks over USA can get one.

[@rxsora25]

Im always nervous using water cooling because if its a defect then it could short circuit everything, especially when it wear down over time makes me wonder if the same result happens.

[@robertkonig177]

I'm going to get the H6, you can buy a dust filter for 10 bugs and if something doesn't fit I'll have to do a bit of sawing

[@Jack_Hunt]

i agree the H6 has crazy cooling too

[@fussnote1758]

A very nice video with the exact help to your problem an my question with the AC LF III and the H6. Thx!

[@ScottishBonobo]

Exactly the video I was looking for thank man !

[@ajanimandara9048]

thanks now i know to go to the h6 flow

[@spy-b6d]

Thank you I'll buy this now

[@SniperPc.]

H6 better

[@YuniorGamboa]

I wish they would have made an H9 but more compact which is like an h6 flow but I don't dig that angle...

[@RobertGates138]

What motherboard did you use in this build?

[@MercuryTV]

Asus B650.

[@Whitewolf425]

So my total rad + fans is 52mm should this fit the H6

[@MercuryTV]

It should, yes. Might have some tight cable management but 55mm should be max.

[@jaberalenezii8863]

Who have the best airflow ?

[@Jack_Hunt]

H6

[@paolosworld99]

Would you say the Fratcal Torrent has worse airflow than the H6? I'm fine with a giant computer case. I just want it to be quiet and cold

[@MercuryTV]

Unfortunately I can’t answer that honestly because I didn’t get to complete my build inside the H6, but it also would have been an entirely different set up than the Torrent. I will say though that if you’re going for an all air cooled build you will love the Torrent. Keeps your temps LOW and the airflow is amazing.

[@Gunnychief]

Will it fit a CORSAIR - iCUE H150i ELITE LCD XT 120mm Fans + 360mm?

[@MercuryTV]

Which case? And how thick is the radiator + fan?

[@tberger077]

I'm concerned about gpu sag as I don't see how I can put a support bracket for the gpu in the H6. Does anyone know of a good fix?

[@MercuryTV]

I drew this up, imgur.com/8hFkjfi. Completely understand the concern there. If your GPU isn't long enough to clear both 140mm intake fans, I think you're SOL. If it does go past the fans, you could get a product like this, www.amazon.com/Aivalas-Support-Graphics-Adjustable-Universal/dp/B0BPGJCLYR/. If it doesn't, I think these braces are your only option, and I don't think they work too well. www.amazon.com/EZDIY-FAB-GPU-Graphics-RTX3090-309EZ-Black/dp/B09466LNV3/

[@explos1ve15]

Will MSI B550 GAMING GEN3 fit the H6 Flow with the Freezer iii? Some motherboards fit according to r/nzxt.

[@MercuryTV]

So it looks like the MSI board doesn't have that massive I/O shield like my ASUS did. I pointed out to another user that the Liquid Freezer was jammed up against it and that's what was preventing me from fully mounting it. This was the picture I took of the mark it left from trying in the H6: imgur.com/a/cpCCfud. So MAYBE that MSI would work, if you give it a shot please let me know how it goes, but make sure you buy from somewhere you can easily return to (hoping you have a Microcenter nearby).

[@explos1ve15]

@@MercuryTV I took the risk and bought the Liquid Freezer and went with MSI B650 Gaming Plus motherboard, it all fits perfectly and my temps are pretty normal. Thanks for your input ^ ^

[@izur0]

nice thx

[@cristinastebbins2489]

What happened to your tape dispenser?

[@MercuryTV]

MAGIC

[@MrCellkill]

5:42 Mine came with crappy DC fans in the front. NZXT, It's 2024! 🤌