O2 sensor locations for a 2006 Eclipse GT 3.8L V6

Note: USE a 22mm SOCKET. Also put Anti Seize around Only on Thread.

[@omegarojo790]

Excelent Video!!!... thanks a lot. Just to complement and share information....because for me was a little hard find the correct data: Bank 1 Sensor 1= Upstream/Before Cat = Right Bank/Front (Rear Upper) Bank 1 Sensor 2= Downstream/After Cat = Right Bank/Rear (Rear Lower) Bank 2 Sensor 1= Upstream/Before Cat = Left Bank/Front (Front Upper) Bank 2 Sensor 2= Downstream/After Cat = Left Bank/Rear (Front Lower)

[@FranciscoPerez-q3n]

Thanks so much for made this informative video, it is really so great information for me. God bless you and I wish you'll the most wonderful Christmas season.🙏👍

[@amokoikaw1]

SIMPLE explaination, CHOO1ME! Nice!

[@whenmullet2674]

The area around the base of my bank 2 sensor 2 was glowing cherry red the other day, car was running rough, almost like the exhaust was clogged. Any ideas what to do to diagnose the problem?

[@tommyt4g63]

Clogged cat maybe?

[@whenmullet2674]

@@tommyt4g63 I was getting a misfire in cylinder 5 message. I swapped the coil pack and spark plug with one in the front, cleaned the throttle body while I was there and the problem went away. Actually it's running better than ever with 199,820 miles.

[@hectorbarboza1926]

on the back side you didn't specify which one was up stream and down stream

[@EPS.17]

I mean kinda obvious

[@A_Class]

Thanks for this 🫡