Spark Plug Replacement on 2006-2012 Mitsubishi 4G Eclipse GT

[@Lord_Dillinger]

Finally a video that shows this HOW-TO pretty well. Thanks again!

[@geo7022]

Thanks Jason! I've searched for help on learning how to replace my spark plugs on my 07 eclipse GT v6. Your video was the best by far!! You literally saved me $425 in labor! And I can also go ahead and change my spark plug o-rings and valve cover gaskets while I'm in there! Thanks man your videos are awesome!!George

[@4GEclipseHowToACI]

glad you enjoyed the video!

[@stlherfer]

Thanks for this video! Could not have done the job without it! Very complete!

[@destinys.4866]

Ok I know this has been up since 2013 but THANK YOU for this video and for being so detailed and straight to the point. Most videos I've seen end up having too much banter and unnecessary content. It is so difficult to find anything specific to this car especially when I want to know schematics. You told every part and even the hint on labeling to bolts was perfect because who thinks about that until afterwards when it's too late lol. Now I know exactly how to get to the back 3 when others only show the front 3!! Thank you again!!

[@4GEclipseHowToACI]

Thank you for the kind words, I'm glad my videos are still being put to good use! I sold this car about 6 months ago :(

[@destinys.4866]

Jason Willis 😲 aww man well I hope you got something you really like to replace it. And I still know I can probably refer to this video/comments to ask about any possible questions on mine lol. It's hard to get responses on alot of forums.

[@4GEclipseHowToACI]

I'm still fairly active on here or you can email me at [e-mail]

[@specops1903]

@@4GEclipseHowToACI do you happen to have a video of how you installed that cold air intake?

[@manfromnantucket9544]

Accidentally launched a plastic straw through the TB and into the manifold the other day, so now I'm looking for a way to get it out. Looks like this will do nicely. Thanks man

[@michaelsolis9891]

Good video bro, so many people make crap videos. This is simple, to the point and detailed. I cracked my engine cover 2 days ago because i didnt know where to pull it xD should of watched this before i tried

[@arturocardenas4981]

Thanks for this video. Very helpful. I need to change the rear coil gaskets. Is it hard to remove and replace?

[@unc23dp]

What's your exhaust set up? Sounded good at the end there.

[@jlawrence057]

I’m pretty sure it’s just straight piped

[@RealDealz05]

Great video! I hope you are still active on here.. Where did you get the conversion kit for the bolts with the Allen key head? Will those also work for the valve cover? I just snapped a bolt..

[@GeekCulture101]

Great vid. Any chance we will be seeing a header install vid?

[@lex45bell]

Awesome video J Will is Cool... I have a 07' Galant Ralliart and this video helped me big time; Thumbs up and thank again:)

[@abubakarkhokhar405]

Thanks for the Video! This is gonna be my first time doing the tuneup my self and I was wondering what type of spark plugs should I use? I was looking at the NKG BKR6EIX would you recommend those?

[@THEVOICEOFTHECHOSENONE]

Great video! Very helpful! Thanks for sharing

[@ovib5204]

Thank you🙏 Really professional help. I have replaced my spark plugs following you and it was very easy. I have found a cut wire on my GT and I don’t know from where is coming. Could you help me out?? I could send you some pictures if you could give me your email adress.

[@4GEclipseHowToACI]

Send em and well see!

[@MoshNbreakz]

thanks man. i really appreciate this video

[@Alramorfar]

Hey man, I was wondering how much of a pain in the ass or is to go 1 step further on the back bank to the valve cover gasket? I just got an 07 gt 3.8 and I've only worked on like 80's Toyota type 4 banger shit.

[@reidbourcier]

Do you know what the spark plug gap spec would be? And is there a difference between this year and a 2009 GT? Thanks.

[@carlosriojas2030]

First thanks for the video, i need to put back the valve/rocker covers, what are the torque specs for the bolts? Or advice? I just got a 06 eclipse gt, no owners manual.

[@superevilnine9]

Thx Jason, will be doing this soon

[@Bammo956]

Is this the same process for the 4G69? like torque gap settings and all?

[@jolleyshotz]

thanks for the help this was a great video

[@cuquito33]

Thank u men u save me 100 realy good video

[@hamadaxy]

thank you very much mission done 100%... but I have a question after I do that if I accelerat smell like something burning I don't know from whare it come!!!! sorry for my week English!

[@4GEclipseHowToACI]

Hamad Ahmed make sure your seals are good on the intake manifolds, you may have a slight oil leak that could be burning on the block.

[@Full60]

I changed the spark plugs on my 2006 Eclipse GT but now it runs and idles rough, like it has a vacuum leak or something. Is there a gasket under the manifold that you removed?

[@4GEclipseHowToACI]

there is a gasket in-between the upper and lower manifold. you should replace it when you take it off along with the o ring gaskets on the valve cover and valve cover gaskets.

[@wyattsexton7083]

I replaced the gasket on the valve cover. When I plugged the spark plug boots they seem to not plug back on to the spark plug tips firmly. What's the fix for this? I thought you just push them back on to the spark plugs - but not that simple.

[@4GEclipseHowToACI]

you should just hear them kinda pop on. A faint click you feel more than you hear.

[@peterking8089]

Help! where do I get a replacement for that plastic valve cover?? I did actually what u said not to do..... I have a 07 4g gt

[@kylerstricklan1337]

Hey I had the same problem did you ever find the replacement I can’t find it anywhere?

[@heyjohnson5535]

My buddy broke my cover taking it off to help me the first time i changed my plugs so i used super glue and baking soda to repair it then after it was dried i put some body filter over it sanded it down painted it and now u can't tell it was cracked

[@SMS570X]

How much will u sell them for ship to US NJ?

[@SMS570X]

my friend have a 2009 same engine he has some coil pack misfire what u recommend brand to buy ? we cant find oem locally

[@4GEclipseHowToACI]

I have a set of 6 OEM used with 40k on them that fire fine if you want to buy them from me and i can ship them. usually if one coil starts misfiring they all will in sequence as you replace them unless you do them all at the same time.

[@UditKumar1]

Hey Jason , does the gasket under the intake manifold need to be changed? I also checked one of my coil packs and it had a bit of oil on it. What could be the possible cause for it?

[@4GEclipseHowToACI]

yeah that is exactly what it is, buy a new valve cover gasket and it will come with the 6 donut gaskets for the spark plugs too.

[@gavinclark5002]

Love the green

[@droppingwrench4156]

Ur awesome jason

[@adrianjohnson1041]

Thanks for this!

[@puma90millan]

Awesome video :)

[@XxxTHEGriMREEfer]

is it the same for the GS?

[@dangelini1137]

Awesome video. do you know what would be different for my 08 Spyder gs?

[@4GEclipseHowToACI]

everything. 4cyl is super easy. should take you 15 minutes max

[@4GEclipseHowToACI]

go to tearstone performance and dwld the FSM, that will have all your torque specs :)

[@khaibui3575]

is this the same for eclipse GS 2008 model ?

[@4GEclipseHowToACI]

No gs is 4 cyl

[@BlueRage]

You need to replace the plenum and EGR gaskets? Did they rip?

[@4GEclipseHowToACI]

+Blue Rage the EGR and Plenum Gaskets are metal. You can replace if you want but a good cleaning is fine.

[@BlueRage]

@@4GEclipseHowToACI Excellent thanks! So nothing was needed but the plugs themselves?

[@4GEclipseHowToACI]

@@BlueRage correct! I mean while you have it open if you want to redo the valve cover gasket seals you can.

[@01ciruz]

Have a quetion which spark wires do you recommend?

[@4GEclipseHowToACI]

our vehicles do not have spark plug wires, they have coil packs. spark plug wires are not needed :)

[@donnysmith7309]

Which plugs are on the front 2,4,6 in rear 1,3,5 is that correct I know firing order Is 1,2,3,4,5,6 my check engine light is on because of misfire number 3 cylinder

[@jasonwillis2751]

yeah so if your standing in front of the car looking at the engine the cylinders from left to right go 246, front from left to right a 135. keep in mind you usually have to replace all the coil packs.

[@vincentquintero8028]

Which sparkplugs do u recommend to use? I need mine tuned up

[@vincentquintero8028]

I have a 2.4 L a GS sport

[@4GEclipseHowToACI]

Oem are normally fine or one step colder

[@vincentquintero8028]

Can u send me the link? And I'm looking for a high performance version btw

[@letsroll2463]

when do we change our coil packs? gt 06?

[@4GEclipseHowToACI]

there is no service requirement, just if they go bad replace them

[@letsroll2463]

im thinking about replacing them and get it over with already, cause the labor involved in replacing it again if need be later on while doing my spark plugs. Im above the 100k mark so i think mines due for a change

[@actanti87]

letsroll its not a cheap replace, i believe there over $100 each

[@4GEclipseHowToACI]

no problem!

[@4GEclipseHowToACI]

RRE headers straight piped 3" in injen Tip

[@OokamiKageGinGetsu]

I didn't understand any of that besides spark plugs.

[@vortexgaming7768]

So I'm basically a decade late but when I was doing this on my own I literally couldnt find one bolt on the intake manifold

[@morisjean8244]

He don't show everything but if u smart u can do it

[@artofmajic]

Where tf u get the engine??!?! I need a replacement engine

[@juanjobs8889]

4th gen is better

[@vincentquintero8028]

I have 2011 2.4 liter version

[@jayceecrx84]

All that just to replace spark plugs?! I want my crx back! :/

[@markgomez7381]

lol you lost me it got confusing with the injector part like do i really have to remove all those wires and cables? if not you should make another video on just the spark plug how to

[@4GEclipseHowToACI]

this is a video on JUST the spark plug replacement, please follow the directions as instructed in the video.

[@666Kevinsmith]

Hererereere herer here in the rear omfg

[@mozamoza9545]

5ttvy

[@flossinerryday3095]

So many unnecessary bolts. I hate mechanics.