4x8 Workbench, Tools, Vacuum, Power and Dust Separator

4x8 Work bench with fold away tools, power, and vacuum. Dust separator DIY Garage wood shop build. Convertible multi tool work bench. Flip top tool storage.
A printable .pdf copy of the plans are available here.
phillipcreative.etsy.com/list...
#CommissionsEarned
Links to products used:
Pocket Hole Jig amzn.to/3l8qoXJ
Router Plate amzn.to/3qCQOlq
Vacuum Hose amzn.to/3qDcjCK
If you would like to support my channel you can donate via PayPal or Patreon.
/ oardiy
paypal.me/phillipcreative
How to build the ultimate work bench solution.

[@scornthwaite]

One thing I think that stands out with your table, is the tools are actually at appropriate heights for being used. As in all tools are at the right height to utilize the table as feeding/outfeed surfaces. VERY well done IMO.

[@phillipreborn]

Thank you! That was a very important part of the design.

[@Sham1r0]

That is very true super well engineered for sure

[@stephennovosad6438]

The bandsaw is the one that reallyu captures my attention!

[@phillamoore157]

Amen to THAT! And, absolutely NO ONE talks about that. And, while the “right” height, can be somewhat subjected, it would be nice to see someone talk about the height, and relation to other tools, as a subject in and of itself. This young man did a great job with this.

[@jamesbizs]

Am I missing something? Why does that stand out? How would it make sense to not have these things level with the table?

[@tube4waldek]

“Only 2 cars garage”? I know I’m picking on words. But you really live in paradise.

[@phillipreborn]

Yes, I am very blessed. I meant in comparison to a designated work shop.

[@larryadams4358]

Seriously, one of the best work table ideas I’ve seen.

[@phillipreborn]

Thank you very much!

[@alanhill6974]

"only a small 2 car garage" - oh to dream! :-) Great build, might see if I can adapt for me 1 car garage.

[@phillipreborn]

Thank you, and yes that sounded bad. I'm very blessed and grateful to have the space I do. I meant as in a comparison to a designated wood shop or professional space.

[@myguysneaker1479]

Frankenworkbench

[@phillipreborn]

I like it!

[@roughsawnwoodcrafts3301]

@@phillipreborn no problems my friend, my comment was good humoured. Although I'd still love a bigger working space!

[@marcothehammer]

LOL! My same sentiment!

[@destasolomon2791]

I’ve seen a lot of these benches in the quest to build my own. This is by far the best I’ve seen. It checks off a few issues for me. Dust management, compactness, multiple tools, just to name a few. Well done sir! You’re light years ahead of the other benches I’ve seen so far and I’m not trying to take anything away from those other folks hard way.

[@phillipreborn]

Awesome, thank you! 👍👍

[@ObsessiveAboutCats]

This is one of the most efficient, logical and awesome workbench builds I've ever seen. Very impressive!

[@phillipreborn]

Awesome, thank you! Thanks for the feedback.

[@johnsparks921]

I'm sure you are loving the extra space and increased productivity! Being a retired design engineer I am very impressed with your work, one of the more functional wood working stations I have seen to date.

[@phillipreborn]

It is very convenient using the work bench and all the milling stages. Thank you!

[@christopherenoch4230]

Love this... Awesome idea, and still have a flat surface to work!

[@phillipreborn]

Thank you, maximizing the work surface was a must!

[@barbarianatgate2000]

This is a great design. I've seen several done, but I really like this. The one thing I would change if I were doing it is how the casters function. Having them move independently will most likely cause the racking and eventually send the unit out of true. If you use a piece of angle iron or square tubing to connect them, it would cause the end to go up or down in unison rather than each corner by itself. Other than that, I think this is an excellent design. Well done!

[@phillipreborn]

I've though about doing that just haven't got around to it yet. That's a great idea, thanks!

[@jamesbizs]

Lol did you see the bending of the table when he was testing is? Just, ouch

[@Paradigm1976]

The fold-down miter saw is perfect.

[@phillipreborn]

Thanks!

[@WhiplashT9]

Man, this has really inspired me. Great design and thank you for posting!! I’m gonna try to come up with a similar set up for my needs now. This is truly great!

[@phillipreborn]

Awesome! Thank you!

[@Justforfun-ek7et]

Very cool build, I am impressed and would love to build something like this for my one car garage shop. Thanks for the inspiration!

[@phillipreborn]

Thanks, I appreciate that. I hope you do build something for yourself soon!

[@Thedestressguy]

Wow, lots of thought and insights went into this build. Awesome work. Who thought about building the band saw into the table and stead of sitting on top of it! Fantastic.

[@phillipreborn]

Thank you very much.

[@sumosprojects]

Super impressive buddy, you’ve gone beyond the call of making something so diverse as this unbelievable workstation & ticked all the boxes, great work 👍👍👍

[@phillipreborn]

Thank you, I appreciate the generous compliment.

[@shirleybigalk885]

Wow!! I'm so totally impressed with your planning and build!

[@phillipreborn]

Thank you so much!

[@johnvodopija1743]

This is one of the best designs I’ve seen. A really good job. Thanks for sharing 👍😎🇦🇺

[@phillipreborn]

Thanks mate I appreciate that. Its my pleasure to share the build. Cool country you have there, I hope to visit someday. Have you seen the KZbinr "Self Sufficient Me"?

[@momomotorsports]

absolutely amazing!.....even after watching it 3 times I still have a hard time wrapping my head around it all.

[@phillipreborn]

Wow, thanks!

[@travisbabbitt4501]

The creativity here is amazing. Great work! Will be buying those plans to build one of these myself.

[@phillipreborn]

Awesome! Thank you!

[@woz1709]

Incredible! A joy to watch! 👍 Thank you! 👍

[@phillipreborn]

Glad you enjoyed it, thank you!

[@benm5913]

This is awesome. I neither have the money, nor need to make this. None the less, this is cool as shit and the special kind of genius that looks simple.

[@phillipreborn]

Thanks for the feedback.

[@cooper8d60]

Hey buddy, firstly great job! Secondly, that outcome (the workstation) comes from well identified issues, thoroughly thought out problem solving and execution with serious detail. It’s a monster and if only I had that level of thought, ability and skill. Thanks for the vlog, definitely inspiring.

[@phillipreborn]

Thanks I appreciate that! If I can do it I believe anyone can. You already laid out the process very well. 💪

[@diyhuntress]

This is SO SMART. 🙌🏼

[@phillipreborn]

Thanks!

[@wildwoodtop]

Graham is a wannabe hacker riding an imaginary stiff horse

[@lancewillinger2284]

@@phillipreborn Dood !!!! I would like to invest in what you have done. Every man wants that. Not sure you line of usage for that, but you can stop right there and tweak that baby a little more, not that i think it needs it but for mass production worldwide. Big Bro hug, You have solved 1 mystery of the world. Proceed to the Billionaires lane.

[@t3jem]

Great idea with the magnetic dust collection. I really like the ease of connection that provides and will likely be adding that to my small shop.

[@phillipreborn]

Glad it was helpful!

[@rsack22]

What a great set up. Never would I have thought of that. I have a small garage and this would be very handy.

[@phillipreborn]

Thank you very much.

[@RanjivJain]

Great job, thanks for doing this. I've got a larger shop but it has multiple work areas (Glass, metal and wood) and this is exactly what I needed to create my separate areas and have my separate setups with my tools... Genius! Well done sir.

[@phillipreborn]

Thank you very much! I'm glad it may have given you an idea or two.

[@mray978]

Wow! That’s very impressive! Good work man.

[@phillipreborn]

Thanks a lot!

[@70ccbigdog]

Where in the hell was this video a year ago when I was building my work bench table. Nice job love all your tools in one place to work with.

[@phillipreborn]

Was but a wee thought back then. Thank you!

[@soundmindtv2911]

Absolutely love this!! This is a marketable design, for sure. Definitely will be working on something like this for myself!!

[@phillipreborn]

Thanks. Go for it!

[@brownsworthy7323]

Absolutely brilliant! I have limited space and would love to build something like this in the future. Thanks

[@phillipreborn]

Thank you! Post a short when you do I'd like to see it.

[@lzh3131]

Yes, this was very inspiring! I am in awe of the great design work & your ingenuity. It’s given me more to think about than being shot sighted in trying to solve individual workstations. Very well done. This video is greatly appreciated.😊

[@phillipreborn]

Thank you for the kind words and for watching. Glad to hear it inspired an idea.

[@stevebeard1633]

Brilliant build. Great for space saving

[@phillipreborn]

Indeed. Thank you!

[@ericfemrite7652]

I love the free hand plunge with a fixed base router! Like a BOSS!

[@phillipreborn]

😂

[@MakerTeej]

AWESOME build! I love the hand-drawn old fashion planning too. (and I might add, I'm incredibly jealous of wherever you live that you can work outside at night with your garage door open and not get eaten by mosquitos!) - Rock on bro!

[@phillipreborn]

Thank you I appreciate the feedback! NE FL so we have our fair share of mosquitoes certain times of the year.

[@BoraHorzaGobuchul]

Or by the neighbors )

[@cgrounds01]

Ingenious design! I'm in the same situation where I have (half) a 2 car garage for my workspace. I've been researching bench builds that incorporate my table saw and at least 1 other tool for almost a year now. If I can get over how daunting of a build this is, I might have to give it a shot. Definitely earned a follow.

[@phillipreborn]

Thank you very much. It was a time investment but totally worth it.

[@waynemiller6070]

Really satisfying to see someone customize their workspace like this. If it works as good as it looks, I like it.

[@phillipreborn]

Thank you! So far so good.

[@scottjackson5835]

Oh, man! You engineered the crap out of that. Awesome job. Great ideas. Thanks for the inspiration.

[@phillipreborn]

Thank you very much! Anytime.👍

[@NBGTFO]

There's no way I could work like that; having to setup and breakdown every tool as I needed it would kill any desire to build anything. Kudos for working through it! Also, I've watched a few videos with builds like this bench and this one struck me as one of the better ones!

[@phillipreborn]

Thanks I appreciate that.

[@lancewillinger2284]

@@phillipreborn Still giddy as a school girl over your design. We all want that 4 x 8 mobile work station. I see great things for you. Add on lock in sectional pieces. I have to calm down. You have the ball, now run with it sir. Good luck and hurry before someone steals your....hmm...you need a catchy name also.

[@jvarblaze7495]

Wow man this was incredible!!! I’m looking forward to seeing more of your content. I’ve never seen someone have so many unique and creative solutions in one build. Are you an engineer? Amazed man!!! Thanks for sharing

[@phillipreborn]

Thank you very much! I would like to be an engineer but no I am not. I got a lot of ideas from youtube then adjusted them to what I needed and the tools I had.

[@mikegbanfield]

This will solve most of my garage shop problems! Thank you for sharing is build. 👌

[@phillipreborn]

Happy to hear that. You're welcome!

[@idlewildsage8088]

Incredible!!! We will definitely be making a bench inspired by this. Fantastic work.

[@phillipreborn]

Thank you for the generous compliment. I am happy to hear it was inspiring.

[@adamburg9669]

Nice work man! This was very well planned out and neat!

[@phillipreborn]

Thank you for the generous compliment.

[@theintelligentcarpenter9407]

Nice job. Tip for you... When enlarging a hole from a hole saw, put the size you want on the arbor and then add the size it is now. Should be enough room to thread them both on. Now just put original hole saw in and the bigger one will cut the hole larger. This is especially useful when the center of the hole(s) needs to stay put. They pop apart fairly easy with a screw driver after. Enjoy.

[@phillipreborn]

Thanks for the feedback and the tip!

[@theintelligentcarpenter9407]

@@phillipreborn anytime

[@ashleylordess5621]

People who disliked this are just jealous of your ingenuity. It's a great Workbench.

[@phillipreborn]

Thank you. :D

[@WoolGB]

Absolutely blew my mind watching you put this together and see how it all came together and work. Wow! Great design, man.

[@phillipreborn]

Thanks a bunch!

[@clm5717]

Thank you! Thank you! Thank you! I also have a small shop in a two car garage that I have to standup and take down. This seems to be perfect for my needs as well. Now to see if I can actually build it LOL. Liked and subd! 👊👌

[@phillipreborn]

You're very welcome! I appreciate that.

[@mvilla4614]

I'm very new to the craft, but I've been looking for a not so difficult way to create a work table/tool storage. Like you said accomplishing this will be fun and full of lessons lol....Amazing job

[@bobbysimon9699]

Awesome build. I have a similar situation of a small shop. Would love to see the plans once you get around to it. I love your ingenuity.

[@phillipreborn]

Thank you I appreciate the generous compliments. Here is a link to the plans and a link to a video that elaborates on them a little. www.etsy.com/phillipcreative/listing/955545412/simple-4x8-full-shop-workbench-plans?Copy&ListingManager&Share&.lmsm&share_time=1614306374860 kzbin.info/www/bejne/i6e5e3meqcRsjNk

[@1955joed]

Awesome job. I also have only a small space to work in. Fortunately, I do have a cargo trailer where I store my tools, but I face the same problems when having to set up and take down all my tools. This gives me inspiration to set up my small shop. Thanks so much for posting. Ingenious!

[@phillipreborn]

Thank you! I hope you are able to put a similar solution in place. It would be cool to see it on larger casters where you could roll it into the trailer if needed.

[@alfredesquer]

Incredibly impressive. My hats off to you sir!

[@phillipreborn]

Thank you good sir!

[@brianodonnell1615]

Amazing job. So clean and functional. Being able to move this station outside is a game changer!

[@phillipreborn]

Totally agree! Thanks.

[@kc.emerson8792]

The placement of your jigsaw is awesome and must steal that idea. Lol

[@phillipreborn]

I'm glad you liked it.

[@danhartman9087]

That sir, is one helluva set up. Great job. Your magnetic vacuum duct solution for your planer is brilliant!

[@phillipreborn]

Thank you very much for the generous compliment.

[@Klatubarada1979]

One of the most original Ideas I've seen on youtube!

[@ModernRemade]

Wow 👏🏻 next level man! Really need to get something like this built for my garage. This has to be one of the most creative workbenches I’ve seen to date. Subbing and looking forward to more content!

[@phillipreborn]

Thanks a ton!

[@lorettagertsch5396]

I hope you patented these plans and are talking to a tool company about selling them your idea! This is amazing!!

[@phillipreborn]

Thank you!

[@thebaymushroomsjp160]

Really impressive! You just raised the bar! Can't wait to see what else you create.

[@phillipreborn]

Thanks a bunch!

[@bruceakins5731]

You have given me much to consider for my project, which is fairly similar in the goal of a flexible workspace for a small area. Thanks!

[@phillipreborn]

Glad to hear. Thanks for the feedback. If I could do it again I would have incorporated a better space for the vacuum. In my case there isn't much clearance left.

[@Rapidfire556]

Super impressive built. Only thing I'm going to add is that I built mine similarly in terms of framing and rough length and with just a 12" miter saw in the middle, that front lower 2x4 started sagging after about 9 months. I jacked it up in the center to take out the bend, then sistered 4 layers of birch to the front and that seems to be holding it for now. So watch out for that with this one and maybe consider beefing up the bottom 2x4 under the miter saw when you start noticing it.

[@phillipreborn]

Thank you and thanks for the tips!

[@stevemcelwain5172]

I know this is over a year old now, and I love the design as I too suffer from a 2 car garage. Some of my machines are older and therefore heavier, I think some incorporating some Gas pistons / Lift supports would help me with smoother (and assisted) lifting of the tools.

[@phillipreborn]

That is a good idea. If its in the budget I think that would be nice.

[@marcm1377]

The concept and execution of the magnetic vacuum plates was on point.

[@phillipreborn]

Thanks! 🧲

[@Cad1900]

This is very well thought out and designed. Great job and thank you 🙏.

[@phillipreborn]

You're very welcome! Thanks!

[@symcardnel1741]

Love seeing a guy bustin it out w/ the garage open and dark as shit out... i too am the kinda guy that will NOT go to bed until the JOB is done!!!

[@phillipreborn]

😁 Thanks!

[@damcintyre81]

Great setup! I've been looking for portable inclusive multi-purpose (p.i.m.p) benches like this for hot minute. 📏📏📐✂️

[@phillipreborn]

Haha, thank you!

[@stevewestcott5130]

Awesome work bench

[@phillipreborn]

Thanks 👍

[@shcaskey]

That is a badass all purpose machine!! It’s the definition of efficiency and very well engineered!!

[@phillipreborn]

Thank you. Precisely what I was aiming for.

[@mickeypoppi]

As an engineer over all a great design, but i would take advantage of the gap between the hinged tops that i did on mine. Use a router t-track bit and route the gaps for a t-track hold down system. the only other is the absence of a vise. An end vise instead of the top mounted type with dog holes is a great add-on to any bench.

[@phillipreborn]

Thank you and thanks for the input. I think those would be great features.

[@plssmellmycheese]

That is really good...now you'll WANT to build stuff as it ll be a pleasure to do! No criticism, but I guess the compromise is a "divided" worktop, with all the gaps, but you could put a fresh board of ply or MDF on top for assembly if needed...I will defo be using some of your ideas😀👍

[@phillipreborn]

Thank you! Absolutely, it makes building things more efficient which makes the experience nicer overall. That is a good point. I still have my small work bench too but I can see how that could be an issue.

[@joem1070]

Kudos for the woodworking and imagination. As a retired design/builder, would have been glad to have hired someone this thoughtful with attention to detail.

[@phillipreborn]

Thank you very much!

[@phillamoore157]

Outstanding job with this. I think I’m gonna go with your design for my own garage. Thank you for sharing!

[@phillipreborn]

Awesome! Thank you!

[@WigManPhil]

I like how you say "the moment you've all been waiting for" and then step into the shot with no shirt. Well, you're halfway there 👍😈🤭

[@phillipreborn]

Haha, funny how the timing worked out there.

[@shaungatrell9964]

What? He was talking? 😂 I must have been distracted.

[@shaungatrell9964]

All kidding aside, I'm finishing my workshop now and the space is smaller than I would've liked to have had. So this has really been inspirational. Fantastic job!

[@t.m.larson1283]

this is amazing! I'm curious, if you could go back to the drawing board, would you move the plainer to where you intended the router to be and vice verse. I saw (see what I did there) the fence of the table saw could block large board.

[@phillipreborn]

Thank you! That is a great option to move the planer. For what I needed it made sense to keep it next to the miter saw and share a vacuum tube with the router. The fence on the table saw is removable. 👍

[@buckwild480]

Wow... This is a fantastic layout! I really like the magnetic hose attachment solution! Well thought out!

[@phillipreborn]

Thank you very much!

[@matthewsee3745]

That's amazing. Excellent craftsmanship.

[@phillipreborn]

Thank you very much!

[@tbarg86]

I have been watching these types of videos for over a hear and this one by far meets everything I was looking for. Love the concept and thank you for sharing your ideas. Do you have some type of a power trim helping you lower the tools? I assume it's not just gravity, correct?

[@phillipreborn]

That's awesome, I am glad to hear that. If you are referring to folding the tools down it is just gravity and man power for now.

[@stephennovosad6438]

I rarely bookmark videos/pages/etc. This is by far a benchmark for the well conceived. Kudos to the attention to functionality without over obsession with prettiness. You say that yours is a small workshop, the beauty of your design is that it will fit within my 28x11 space whereby I can shift the unit from one side of the shop to the other in order to access all the features, as well as having enough space to build the small boats I develop. Will be consecrating the upcoming holidays to building my version. Thanks so much for doing all of the hard work! Essentially leaving me with just an assembly job.

[@phillipreborn]

Thanks, I'm glad to hear it helped.

[@chrismontalbano5969]

AWESOME! I have different tools, but the concept is exactly what I needed for inspiration. I'll start working on my plans immediately and hope to have it done in a few weeks.

[@phillipreborn]

Thanks! Sounds great.

[@robertmorris9998]

Beautiful build. It’s been a few months, I’d be very interested in knowing how the dust collection worked out. It seemed to me to be woefully underpowered. Other than that, I dream of building this table myself. *****

[@phillipreborn]

Surprisingly the bucket head does pretty well except on the miter saw. A little more power is always better.

[@shofarsogood7504]

p.caballero_creative do the magnetic connections work well with little to no air leakage?

[@CrzBonKerz21]

All this impressive shit and dude’s got a Kobalt miter saw. Guess it proves that the tools don’t make the carpenter.

[@phillipreborn]

Thank you! I agree even though I'm just an amateur.

[@eiward]

I've used a really small Kobalt moter saw and one of their 18 or 20 volt (not sure which voltage they claim, even though they're all the same) drills, and I must say that I was very impressed. I've had nothing but crap experience with their hand tools.

[@scottrobertson9788]

That’s incredible! Amazing ingenuity, super impressive! Awesome work, thanks for posting!

[@phillipreborn]

Glad you enjoyed it!

[@jacknaylor1260]

Seeing this for the first time. Incredible and makes me want to upgrade my own again. 👍🏻 awesome job

[@phillipreborn]

Awesome! Thank you!

[@fredblank3720]

Don’t work with sandals. You gotta protect your beautiful tootsies.

[@phillipreborn]

indeed

[@DJRaevenHeart]

I liked this anyway, however the video is unwatchable for me. Hearing the background music in both ears, while at the same time your commentary only being on the left side does my head in too much. Too hard to focus.

[@phillipreborn]

Yep, rookie production mistake. Stereo vs mono thing.

[@MRSCOTTZD]

Offff tough crowd! I didn’t even notice the mono / stereo 😂 good video keep up the work :)

[@jimmac1185]

​@@MRSCOTTZDyou didn't watch with headphones then. I came here to make the same comment as OP. Very distracting.

[@pinos74667]

This table is freaking awesome. Definitely subscribing to see what other cool ideas you come up with. Great job on the table 👏

[@phillipreborn]

Thank you, I appreciate that!

[@FrymanJack]

I love it! It seems achievable also by regular hobbyist. Yeah I really need to compact my stuff

[@phillipreborn]

Thank you! It speeds up my productivity quite a bit and its nice having a place for everything.

[@tripledstickers]

All around great job. As Stephen said ensuring all tools are sitting to use the table as an extension of each tool was great planning. I also like the use of the magnets.

[@phillipreborn]

Thanks!

[@FJBsaidcornpop]

I bet the neighbors are loving his mini garage saw mill running all day. BUT A 1 JOB ON YOUR WORK STATION.

[@phillipreborn]

Thank you very much! Sadly I don't run it as often as I'd like.

[@FJBsaidcornpop]

@@phillipreborn I couldn't think about running a saw, my neighbors would be calling the H. O. A. the police the Mayor. They have nothing to do but watch, listen and report. Can't wait till our house sells and I can build a shop and get as far away from the granny gestapos as we can. One question for you, if you had a chance to buy a 2k radial arm saw for an incredibly low price would that be something that would be useful or something that is taking up space? Thanks for your reply, your work table was incredible, going to make an exact copy in about 5 months when my shop is built. Take care!

[@JustAskingAndCurios]

Sweet. Nice winter project. Thanks.

[@phillipreborn]

Thank you! Sounds good 👍

[@tgreen6522]

Great job. I have been looking at different ways people have made their work benches. I really like how you designed this one. Thanks for the video.

[@phillipreborn]

Thanks for the feedback.

[@rolandgdean]

Jean at WoodShop Junkies built one of these. It's really a great idea for a small workspace. Great job!

[@phillipreborn]

Thank you very much!

[@amaurycaraballo1254]

The magnets idea was genius! Great work!

[@phillipreborn]

Thank you very much!

[@ChristopherYardin]

Love this set up!

[@phillipreborn]

Thanks!

[@scott_sauce]

Love it... I'm inspired for sure. Thanks for posting

[@phillipreborn]

Thank you! Happy to hear that. Thanks for watching.

[@ronsanger-tk1ox]

Great job. I love the vac system especially the diy flap gates.

[@phillipreborn]

Thank you. They weren't too hard to build and are working fine for me still.

[@imigistx]

That's fantastic. I have exactly the same problem in my garage shop. I'm absolutely going to do something like this.

[@phillipreborn]

Thanks. Go for it! I hope it works out.

[@galemaynard6665]

Awesome work 👍👍👍👍👍

[@phillipreborn]

Thank you 👍👍👍

[@jaxn66]

Just wanted to leave a note to say Thanks! for making this video. The bench is amazing and the video of the build is very detailed and informative. Just what I needed :)

[@phillipreborn]

Thank you and thanks for watching.

[@RingoPornostar]

I've seen a lot of similar types of builds. This one is hands down the best. Design, simplicity, and utility surpass the rest. Awesome build

[@phillipreborn]

Thank you for that!

[@BA-ic9uh]

Incredibly well thought out and done. Kudos kudos. A total inspiration

[@phillipreborn]

Thank you, happy to hear that!

[@pfarabee]

Glad to see all the Ryobi love in your shop. That brand gets a bad rep, but I find them to be good little tools for the price.

[@phillipreborn]

Thanks, I agree. Of course higher quality tools would be better but they are decent for their price. They've got a lot of jobs done for me so far.

[@Atlas.X9X]

That is quite an amazing workbench. Nice job.

[@phillipreborn]

Thank you very much!

[@ericanorman8884]

YOU BUILT A GREAT WORK SPACE FOR YOUR WOOD WORKING, GREAT IDEA BUB.

[@phillipreborn]

Thanks 👍