OBS Ford 7.3 Powerstroke Bellowed Up-Pipes and EBPV Delete

[@Awsom47Merc]

MORE POWER FOR THE POWER STROKE ! Good informative vid Brian . Thanks ! 👊😎👍

[@kirkpalmer1709]

I'm pretty sure the T444E in the International trucks already have bellowed up pipes so no need to upgrade.

[@josetovar3122]

Did you need a gasket for the new high flow outlet to turbo? And what brands of parts did you use (pedestal, high flow outlet?

[@dirtroadderelicts]

There's no gasket in between the turbo and outlet housing, I used a kit I bought from Cp addicts that was the pedestal and outlet housing together

[@IronStraw1]

I am not really understanding how you got the drivers side Up pipe out I am doing this job now and the passenger side was no problem - the collector pulled right off but the drivers side up pipe is disconnected from the exh manifold - but there is no way to remove it or or install this Wouldnt i need to lower the transmission to increase space between the firewall and the block / tranny to increase the gap and pull out the drivers side ? my truck is an automatic 4x4, dual rear wheel - I think your truck is also - if that makes a difference I am not sure - I know the manual transmissions are even harder

[@dirtroadderelicts]

Mines a 5 speed truck, I thought the same thing but lifting the back of the transmission 100% works. That's how I did mine

[@IronStraw1]

Thank you - I'm fighting the weather because its getting cold here - I should have left the drivers side in place instead of removing the drivers side bolts at the manifold, then replace the gasket at the collector - so i would have one stainless bellowed pipe and one old pipe :) at least id be done by now and not working in the driveway in teh snow ...thanks for your vid

[@haroldwilkerson2026]

Could you please show your hood release or did you do a video on it😮

[@dirtroadderelicts]

Previous owners did that, it's pretty common when the pull handle inside gets messed up, just cut the cable behind the grille, and loop it so you have a little pull handle to pop the hood open.

[@blindtomsadventures2067]

Sorry to say my fault waste of time fix it like original in there be fine for 300,000 mile

[@blindtomsadventures2067]

That will be a fourth for not designed for that motor they were designed for IDI. That’s why they you cannot accept them. but what do I know I work for international for 20 years?

[@blindtomsadventures2067]

Still waiting for the license plate. You said you sent me

[@haroldwilkerson2026]

@@blindtomsadventures2067 was I supposed to send you a license plate if I was I'm sorry I forgot